ourzhangthings-blog - Tumblr blog

ourzhangthings-blog · 6 years ago

Text

Stainless Steel Perforated Mesh – The Most Common Material

Stainless steel perforated metal mesh has good corrosion resistant performance in air, steam, water and other weak corrosive medium. It has high strength and wear resistance, which supports the longer service life than mild steel.

https://www.perforatedmetalsupplier.com/products/materials/stainless-steel-perforated-mesh.html

Among all the materials, stainless steel is the most economical one and you can find it widely used in our life.

The stainless steel perforated metal screens with several hole types and bright surface. Stainless steel perforated metal panels.

This is a stainless steel round hole perforated metal with bright surface. Stainless steel round hole perforated metal.

This is a stainless steel square hole perforated metal with bright surface. Stainless steel square hole perforated metal.

Common Types ?304 (S30400) – It has high temperature resistance, good processability and high hardness. It is widely used in industry, medical treatment, food, architecture and other industries. ?304L (S30403) – It is a kind of extra-low-carbon stainless steel of 304. It reduces carbon deposition during welding. In addition, its welding property is higher than 304. ?316 (S31600) – A certain amount of Mo elements are added in 316, which can improve the resistance against high temperature, corrosion and wear. It is widely used in marine works, chemical industry, medical treatment, construction and other industries. ?316L (S31603) – It is a kind of extra-low-carbon stainless steel of 316. It reduces carbon deposition during welding. In addition, its welding property is higher than 316. ?321 (S32100) – A certain amount of Ti elements are added in 321. It can maintain the stability under the condition of severe corrosion. It is highly corrosion resistant, high temperature resistant, wear resistant and creep resistant. It is widely used in oil, chemical, medical treatment, aircraft and other industries. ?430 (S43000) – 430 stainless steel has better thermal conductivity and corrosion resistant performance than 300 series. 430 stainless steel can resist the corrosion of nitric acid and some organic acids. It is widely used in chemical, laboratory and other corrosive environments.

Chemical Component (%)

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

Others

304

min. – – – – – 17.5 – 8.0 – –

max. 0.07 2.0 0.75 0.045 0.030 19.5 – 10.0 0.1 –

304L

min. – – – – – 17.5 – 8.0 – –

max. 0.03 2.0 0.75 0.045 0.030 19.5 – 10.0 0.1 –

316

min. – – – – – 16.0 2.0 10.0 – –

max. 0.08 2.0 0.75 0.045 0.030 18.0 3.0 14.0 0.1 –

316L

min. – – – – – 16.0 2.0 10.0 – –

max. 0.03 2.0 0.75 0.045 0.030 18.0 3.0 14.0 0.1 –

321

min. – – – – – 17.0 – 9.0 – Ti = 5 (C + N)

max. 0.08 2.0 0.75 0.045 0.030 19.0 – 12.0 0.1 0.70

430

min. – – – – – 16.0 – – – –

max. 0.12 1.00 1.00 0.040 0.030 18.0 – 0.75 – –

Mechanical Property

Grade

Tensile Strength (MPa) min.

Yield Strength (MPa) min.

Elongation at Break in 50 mm (%) min.

Hardness

Rockwell Hardness

Brinell Hardness (HB) max.

304 515 205 40 92 201

304L 485 170 40 92 201

306 515 205 40 95 217

306L 485 170 40 95 217

321 515 205 40 95 217

430 450 205 22 89 183

Applications ?Architecture ?Chemical industry. ?Paper industry. ?Pharmaceutical industry. ?Automotive & Transport. ?Filter ?Furniture ?Decorative ?Speaker Grille

0 notes

ourzhangthings-blog · 6 years ago

Text

Aluminum Perforated Mesh– The Best Choice for Architecture

Aluminum panel has good reflex for visible light and heat. And aluminum perforated screen has good corrosion resistance and malleability. It is the ideal low-temperature-resistant material. Anodizing can improve the corrosion resistance and form a beautiful appearance.

https://www.perforatedmetalsupplier.com/products/materials/aluminum-perforated-screen.html

. The round hole aluminum perforated sheet with blue protective film. Protective film for the aluminum perforated screen.

The golden decorative perforated metal. Anodized aluminum decorative perforated screen.

Common Types ?1100 – It is commercially pure aluminum with a content of 99.0%. Its strength is relatively low, but has excellent ductility, formability, weldability and corrosion resistance. Anodizing, can further improve the corrosion resistance while obtain an aesthetic surface. ?3003 – It is an alloy of aluminum and manganese. 3003 is the most widely used anti-rust aluminum. It has good corrosion resistance (close to 1100) to atmospheric, fresh water, sea water, food, organic acid, gasoline, neutral inorganic salt solution, dilute acid etc. ?5005 – Similar to 3003. It has medium strength and good corrosion resistance, and its anodized film is brighter than 3003. ?5052 – Belongs to the Al-Mg alloy and has a wide range of applications. Especially in the construction industry, it is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. ?2024 – Belongs to the Al-Cu-Mg alloy. High-strength hard aluminum, which is twice hard than 5052. It can be strengthened by heat treatment but not very corrosion resistant, so it is often anodized and painted or coated with aluminum to improve its corrosion resistance. ?6061 – Belongs to the Al-Mg-Si alloy. It has many features: Excellent processing properties, good corrosion resistance, high toughness, no deformation after processing, easy color film, excellent oxidation effect, etc. ?7075 – It is a cold-treated forging alloy with high strength and hardness, far better than mild steel. 7075 is one of the most powerful alloys in the industry, with common corrosion resistance, good mechanical properties and excellent anodic reaction, therefore, it is a typical aluminum alloy for aerospace military industry.

Chemical Component of Aluminum (%)

Grade

Al min.

Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others

1100 99.00 0.95 Si + Fe 0.05–0.02 0.05 – – 0.10 – 0.15

2024 Rem. 0.50 0.50 3.8–4.9 0.30–0.90 1.2–1.8 0.10 0.25 0.15 0.15

3003 Rem. 0.60 0.70 0.05–0.20 1.0–1.5 – – 0.10 – 0.15

5005 Rem. 0.30 0.70 0.20 0.20 0.5–1.1 0.10 0.25 – 0.15

5052 Rem. 0.25 0.40 0.10 0.10 2.2–2.8 0.15–0.35 0.10 – 0.15

6061 Rem. 0.40–0.80 0.70 0.15–0.40 0.15 0.8–1.2 0.04–0.35 0.25 0.15 0.15

7075 Rem. 0.40 0.50 1.2–2.0 0.30 2.1–2.9 0.18–0.28 5.1–6.1 0.20 0.15 Note: Rem.=Remainder

Mechanical Property

Grade

Temper

Tensile Strength (MPa)

Yield Stress (MPa)

Elongation at Break (%)

0.25–1.25 mm

1.26–3.0 mm

1100

– 89.6 34.5 30 6

H12 110.3 103.4 4 12

H14 124.1 117.2 3 10

H16 144.8 137.9 2 8

H18 165.5 151.7 2 6

2024

– 186.2 75.8 18 20

T3 482.6 344.7 16 18

T4 468.8 324.1 20 19

3003

�� 110.3 41.4 30 33

H12 131.0 124.1 9 11

H14 151.7 144.8 3 7

H16 179.3 172.4 3 5

H18 199.9 186.2 3 5

5005

– 124.1 41.4 22 25

H12 137.9 41.4 22 25

H14 158.6 131.0 5 9

H16 179.3 172.4 3 5

H18 199.9 193.1 2 2

H32 137.9 117.2 8 9

H34 158.6 137.9 6 8

H36 179.3 165.5 5 6

H38 199.9 786.2 3 4

5052

– 193.1 89.6 20 21

H32 227.5 193.1 7 10

H34 262.0 213.7 6 8

H36 275.8 241.3 4 5

H38 289.6 255.1 3 4

6061

– 124.1 55.2 25 26

T4 241.3 144.8 22 24

T6 310.3 275.8 12 17

7075

– 127.5 103.4 16 18

T6 572.3 503.3 11 12

Applications ?Decoration ?Cladding ?Ceiling ?Guardrail ?Acoustic panel

0 notes

ourzhangthings-blog · 6 years ago

Text

Copper and Brass Perforated Mesh for Architecture and Decoration

Perforated copper screen has good malleability, thermal conductivity and electrical conductivity. When copper are exposed in the air, it will be slowly oxidized, so copper screen has good corrosion resistant performance. Copper perforated sheets are widely used in architecture for decoration and facade cladding.

https://www.perforatedmetalsupplier.com/products/materials/copper-brass-perforated-mesh.html

The round hole brass perforated metal with the metallic sheen. Brass perforated panel.

Brass is an alloy of copper and zinc. It has bright golden appearance and good wear resistance.

Our brass perforated meshes are often used in manufacturing filters, test sieves or architectural decoration.

Common Types ?C11000 – It is 99.90% pure copper. It has high electrical conductivity, in excess of 100% IACS, and good corrosion resistance. C1100 copper has a wide range of uses, including applications in architectural, industrial, electrical, automotive and construction industries. ?C28000 – Its copper content is about 60%. It has good mechanical properties, cutting property, welding properties, corrosion resistant performance and easy to polish features. ?C27000 – It contains slightly more copper than C28000, and it has better mechanical property than C28000. ?C26200 – Its mechanical property is better than C27000. It has good malleability, high strength, excellent cutting property, corrosion assistant performance and easy to weld features. It is the most widely used type of brass. ?C26000 – Its properties are similar to C26200. Its copper content is higher than other types. ?C24000 – It has low strength, good plasticity, good weld performance and corrosion resistant performance. ?C22000 – Its properties are similar to C21000. It has good plasticity and high strength features. ?C21000 – It is the lowest strength brass. However, its strength is higher than copper. It has good corrosion resistant performance, plasticity, welding performance and no stress corrosion cracking.

Applications ?Architecture ?Chemical industry. ?Food processing. ?Gas turbines. ?Petrochemical industry. ?Pharmaceutical industry. ?Automotive & Transport. ?Decorative ?Filter ?Test Sieve

0 notes

ourzhangthings-blog · 6 years ago

Text

Carbon Steel Perforated Mesh for Filtration and Screening

Mild Steel – High Strength and Cost Effective Material Round hole perforated metal screen with bright surface. Carbon steel perforated mesh

https://www.perforatedmetalsupplier.com/products/materials/carbon-steel-perforated-mesh.html

Carbon steel is divided into high carbon steel, medium carbon steel and low-carbon steel according to different carbon content.

The higher the carbon content, the higher the hardness and strength of carbon steel, while the lower the plasticity.

Our carbon steel perforated screen has low price and high strength. It is widely used in construction and industry.

Common Types High carbon steel. 0.8% to 2.0% carbon content. It has high strength but poor toughness. We usually use it to make vibrating screen and mine sieving mesh. Medium carbon steel. 0.3% to 0.8% carbon content. It is used to manufacture stainless steel. Low carbon steel. 0.05% to 0.30% carbon content. It has the shortest tempering time. It is soft, stamping resistant with good ductility. Carbon steel has two treatment types: hot rolling and cold rolling. Hot rolling is the first process of steel molding. Steel becomes hard and brittle after cold rolling. After degrease and annealing, the steel will recover its toughness.

Mild steel is not very corrosion resistant. Generally, we can provide galvanization, sprayed painting, PVC coating and other surface treatments to protect it from corrosion.

Square hole perforated metal screen with bright surface. Square hole perforated screen

Slot hole perforated metal screen with bright surface. Slot hole perforated screen

Applications Energy production Mining industry Cement production Architecture Vibrating Screen Wind Dust Fence Noise Barrier

0 notes

ourzhangthings-blog · 6 years ago

Text

Hot-Dipped and Electrical galvanized Perforated Mesh

Galvanized Perforated Mesh– Great Corrosion Resistance Galvanized perforated mesh is widely used in construction and decoration.

https://www.perforatedmetalsupplier.com/products/materials/galvanized-perforated-mesh.html

We can supply both hot-dip galvanization (HDG) and electro-galvanization (EG).

Boegger’s hot-dip galvanized perforated screens are qualified with long lifespan. Large scale orders are available. It is widely used in outdoor steel structures.

Boegger’s electro-galvanized perforated screens, also named as cold galvanizing, has compact and uniform zinc layer. It has good appearance, decoration and malleability.

Hot-dip galvanized perforated meshes with 4-point star hole type. Galvanized perforated mesh

Triangular hole electrical galvanized perforated screen. Electrical galvanized perforated mesh

The differences between Electro-Galvanization (EG) and Hot-Dip Galvanization (HDG): Different coating thickness. The zinc layer of HDG is much thicker than EG. Different zinc layer adhesion. The the zinc layer of HDG has stronger adhesion than EG. Different surface roughness. The surface of HDG perforated mesh is smooth but not bright. The EG has the smooth surface and weak metallic luster. Different corrosion resistant performance. HDG perforated mesh is much corrosion resistant than EG. Different usage situation. HDG perforated screen is usually used in outdoors. The EG perforated screen is generally used indoors. Round hole galvanized perforated mesh coils. Galvanized perforated mesh coil.

Louver hole galvanized sound barriers on the ground. Galvanized sound barriers.

Applications Energy production. Mining industry. Steel production industry. Waste processing. Cement production. Automotive & Transport. Lorries, buses and train. Full Name*

0 notes

ourzhangthings-blog · 6 years ago

Text

Nickel Alloy Perforated Mesh for Chemical Industry

Nickel alloy is high temperature and corrosion resistant.

https://www.perforatedmetalsupplier.com/products/materials/nickel-alloys-perforated-mesh.html

The alloy of nickel and copper is called Monel. The alloy of nickel and chromium is called Inconel. Monel The hex hole perforated metal mesh. Hex hole Monel perforated panel

Monel perforated screen has excellent corrosion resistance in hydrofluoric acid, fluorine gas media, hot concentrated alkali liquor, neutral solutions, water, seawater, the atmosphere and organic compounds, etc.

Common Types

UNS N04400 (Monel 400) – A corrosion-resistant alloy with the largest amount, the most versatile and excellent comprehensive performance. UNS N05500 (Monel K500) – In addition to excellent mechanical properties such as high strength, corrosion resistance and non-magnetic properties, it also has the same corrosion resistance of Monel 400. Chemical Element of Monel (%) Grade Ni Cu Ti Fe C Mn Al Si S UNS N04400 min. 63.0 28.0 – – – – – – – max. – 34.0 – 2.50 0.30 2.00 – 0.50 0.024 UNS N05500 min. 63.0 27.0 0.35 – – – 2.30 – – max. – 33.0 0.85 2.00 0.25 1.50 3.15 0.50 0.01 Mechanical Property of Monel Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation at Break (0.2% offset) Rockwell Hardness (HRB) UNS N04400 Anneal 482–586 207–310 35–45 65–80 Cold Rolling 690–827 621–758 2–15 93 min. UNS N05500 Cold Rolling + Anneal 621–724 276–448 25–45 85 max. Inconel The silver Inconel round hole perforated screen. Inconel perforated mesh

Inconel perforated mesh has excellent high temperature oxidation resistance, and won’t get embrittled after repeated heating and cooling. It is well suited for extreme pressure and heat environments.

The most common type of Inconel alloy is UNS N06600 (Inconel 600), UNS N06601 (Inconel 601) and UNS N06625 (Inconel 625).

Chemical Component of Inconel (%) Grade Ni Cr Fe C Mn Si Cu Al Ti B P S UNS N06600 min. 72 14 6.0 – – – – – – – – – max. – 17 10.0 0.15 1.0 0.5 0.05 0.3 0.3 0.006 0.015 0.015 Grade Ni Cr Fe C Mn Si Cu Al Ti B P S UNS N06601 min. 58 21 10 – – – – – – – – – max. 63 25 15 0.1 1 0.5 1 1.7 – – 0.03 0.015 Grade Ni Cr Ti Fe C Mn Al Si S Mo P Nb + Ta UNS N06625 min. 58.0 20.0 – – – – – – – 8.0 – 3.15 max. – 23.0 0.40 5.00 0.10 0.50 0.40 0.50 0.015 10.0 0.015 4.15 Mechanical Property of Inconel Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation at Break (0.2% offset) Rockwell Hardness (HRB) UNS N06600 Annealed 550-690 205-345 35-55 – UNS N06601 Annealed 570-750 225-400 35-55 – UNS N06625 Annealed 827-1034 414-621 30-55 145–240 Applications Architecture Chemical industry. Offshore industry. Petrochemical industry. Petrochemical industry. Aerospace.

0 notes

ourzhangthings-blog · 6 years ago

Text

Nickel Alloy Perforated Mesh for Chemical Industry

Nickel alloy is high temperature and corrosion resistant.

https://www.perforatedmetalsupplier.com/products/materials/nickel-alloys-perforated-mesh.html

The alloy of nickel and copper is called Monel. The alloy of nickel and chromium is called Inconel. Monel The hex hole perforated metal mesh. Hex hole Monel perforated panel

Monel perforated screen has excellent corrosion resistance in hydrofluoric acid, fluorine gas media, hot concentrated alkali liquor, neutral solutions, water, seawater, the atmosphere and organic compounds, etc.

Common Types

UNS N04400 (Monel 400) – A corrosion-resistant alloy with the largest amount, the most versatile and excellent comprehensive performance. UNS N05500 (Monel K500) – In addition to excellent mechanical properties such as high strength, corrosion resistance and non-magnetic properties, it also has the same corrosion resistance of Monel 400. Chemical Element of Monel (%) Grade Ni Cu Ti Fe C Mn Al Si S UNS N04400 min. 63.0 28.0 – – – – – – – max. – 34.0 – 2.50 0.30 2.00 – 0.50 0.024 UNS N05500 min. 63.0 27.0 0.35 – – – 2.30 – – max. – 33.0 0.85 2.00 0.25 1.50 3.15 0.50 0.01 Mechanical Property of Monel Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation at Break (0.2% offset) Rockwell Hardness (HRB) UNS N04400 Anneal 482–586 207–310 35–45 65–80 Cold Rolling 690–827 621–758 2–15 93 min. UNS N05500 Cold Rolling + Anneal 621–724 276–448 25–45 85 max. Inconel The silver Inconel round hole perforated screen. Inconel perforated mesh

Inconel perforated mesh has excellent high temperature oxidation resistance, and won’t get embrittled after repeated heating and cooling. It is well suited for extreme pressure and heat environments.

The most common type of Inconel alloy is UNS N06600 (Inconel 600), UNS N06601 (Inconel 601) and UNS N06625 (Inconel 625).

Chemical Component of Inconel (%) Grade Ni Cr Fe C Mn Si Cu Al Ti B P S UNS N06600 min. 72 14 6.0 – – – – – – – – – max. – 17 10.0 0.15 1.0 0.5 0.05 0.3 0.3 0.006 0.015 0.015 Grade Ni Cr Fe C Mn Si Cu Al Ti B P S UNS N06601 min. 58 21 10 – – – – – – – – – max. 63 25 15 0.1 1 0.5 1 1.7 – – 0.03 0.015 Grade Ni Cr Ti Fe C Mn Al Si S Mo P Nb + Ta UNS N06625 min. 58.0 20.0 – – – – – – – 8.0 – 3.15 max. – 23.0 0.40 5.00 0.10 0.50 0.40 0.50 0.015 10.0 0.015 4.15 Mechanical Property of Inconel Grade Tensile Strength (MPa) Yield Strength (MPa) Elongation at Break (0.2% offset) Rockwell Hardness (HRB) UNS N06600 Annealed 550-690 205-345 35-55 – UNS N06601 Annealed 570-750 225-400 35-55 – UNS N06625 Annealed 827-1034 414-621 30-55 145–240 Applications Architecture Chemical industry. Offshore industry. Petrochemical industry. Petrochemical industry. Aerospace.

0 notes

ourzhangthings-blog · 6 years ago

Text

Etched Mesh for Filtration and Dust Prevention

The metal mesh produced by the etching technique is called etched mesh, which has high precision with the highest accuracy of ±0.001 mm. It has no burrs and pressure points, and it will not deform after processing. The etched mesh is commonly used in integrated circuits, precision filtration, fluorescent screen grille, microelectronic components, etc.

https://www.perforatedmetalsupplier.com/products/patterns/etched-screen-perforated-metal.html

Specifications Standard material: stainless steel Thickness: 0.01 mm – 1 mm. Etched hole size must be smaller than the thickness. The smallest hole size: 0.05 mm.

0 notes

ourzhangthings-blog · 6 years ago

Text

Raised Perforated Metal Protects People From Slipping

Raised perforated metal is often used in manufacturing non-slip floors. It can effectively enhance the frictional resistance when people walk. The raised perforated metal can be punched into various patterns through numerically controlled punching. The material generally includes stainless steel, carbon steel and galvanized sheet.

https://www.perforatedmetalsupplier.com/products/patterns/raised-perforated-metal.html

Patterns Raised Perforated Metal DIPM-01

Raised Perforated Metal DIPM-02

Raised Perforated Metal DIPM-03

Raised Perforated Metal DIPM-04

Raised Perforated Metal DIPM-05

Raised Perforated Metal DIPM-06

Raised Perforated Metal DIPM-07

Raised Perforated Metal DIPM-08

Raised Perforated Metal DIPM-09

Raised Perforated Metal DIPM-10

Raised Perforated Metal DIPM-11

Notes: DIPM-01 to DIPM-07 raised height is between 2 mm and 3 mm. The height difference between the highest point and lowest point of DIPM-08 is about 19 mm. DIPM-09 raised height is about 7 mm, also know as crocodile mouth safety tread. The 90-degree bent safety tread made of stainless steel perforated metal with round raised holes. DIPM-01 stainless steel raised perforated metal safety tread

The safety tread made of DIPM-04 perforated metal with big or small holes. DIPM-04 stainless steel raised perforated metal safety tread

The safety tread made of crocodile mouth perforated metal. DIPM-09 stainless steel raised perforated metal safety tread.

0 notes

ourzhangthings-blog · 6 years ago

Text

Louver Hole Perforated Metal Sheet for Heat Dissipation and Noise Barrier

Louver hole perforated metal is manufactured by the mold stamping. It has good dust and water prevention effect and is easy to maintain and clean. For its good heat dissipation effect, it is often made into various heat dissipation devices.

https://www.perforatedmetalsupplier.com

Overview The louver hole perforated metal sheet has two patterns: straight pattern and staggered pattern.

Straight Pattern Parameter diagram of straight louver hole perforated metal. Dg a × b – t × t1 straight louver hole perforated metal

The straight louver hole perforated metal whose hole pattern resembles fish scales. LUPM-01: Dg 50 × 15 – 60 × 25 louver perforated metal

Staggered Pattern Parameter diagram of staggered louver hole perforated metal. Dd a × b – t × t1 staggered louver hole perforated metal

The staggered louver hole perforated metal whose hole pattern resembles fish scales. LUPM-02: Dd 50 × 15 – 60 × 50 louver hole perforated metal

0 notes

ourzhangthings-blog · 6 years ago

Text

Decorative Perforated Mesh With Various Patterns

Decorative perforated metal is the most effective solution to enhance aesthetics of building and projects. We provide various materials for you to choose, mild steel, stainless steel, aluminum, cooper and brass, etc.

https://www.perforatedmetalsupplier.com/products/patterns/decorative-perforated-metal.html

We can provide powder coating, anodizing and other surface treatment. There are several decorative patterns which are best-selling as followed. Besides, customized hole types are also available.

Patterns Decorative perforated metal. DEPM-01

Decorative perforated metal. DEPM-02

Decorative perforated metal. DEPM-03

Decorative perforated metal. DEPM-04

Decorative perforated metal. DEPM-05

Decorative perforated metal. DEPM-06

Decorative perforated metal. DEPM-07

Decorative perforated metal. DEPM-08

Decorative perforated metal. DEPM-09

Decorative perforated metal. DEPM-10

Decorative perforated metal. DEPM-11

Decorative perforated metal. DEPM-12

Decorative perforated metal. DEPM-13

Decorative perforated metal. DEPM-14

Decorative perforated metal. DEPM-15

Decorative perforated metal. DEPM-16

Decorative perforated metal. DEPM-17

Decorative perforated metal. DEPM-18

Decorative perforated metal. DEPM-19

Decorative perforated metal. DEPM-20

Decorative perforated metal. DEPM-21

Decorative perforated metal. DEPM-22

Decorative perforated metal. DEPM-23

Decorative perforated metal. DEPM-24

0 notes

ourzhangthings-blog · 6 years ago

Text

Hexagonal Hole Perforated Mesh for Ventilation and Heat Dissipation

Hexagonal hole perforated mesh can provide large open area up to 80%, which ensures a broad field of vision. The hexagonal hole perforate screen has high strength-weight ratio, so it has lighter weight than other types while the same performance.

https://www.perforatedmetalsupplier.com/products/patterns/hexagonal-hole-perforated-metal.html

Overview Hexagonal Hole Hexagonal hole perforated metal with black ground. HEPM-01: Sv 8-10.5 hexagonal hole perforated metal Model Sv 8-10.5 a (mm) 8 t (mm) 10.5 P (%) 58.1 Thickness (mm) 1.0–3.0 Materials SS, Gal, Al, Cu, etc. Dimensions 1 m × 2 m 1.22 m × 2.44 m Customization available CALCULATOR Open area formula Common Specifications Here are some common ordering specifications of the hexagonal hole perforated metal. We can also provide more, if you have special requests, please contact us.

Hexagonal Hole Item a (mm) t (mm) P (%) Sv 8-10.5 8 10.5 58.1 Sv 8-12 8 12 44.4 Sv 10-15 10 15 44.4 Sv 10-18 10 18 30.9 Sv 10-28 10 28 12.8 Sv 12-16 12 16 56.3 Sv 14-21 14 21 44.4 Sv 16-21 16 21 58.1 Sv 16-34 16 34 22.1 Sv 18-25 18 25 51.8 Sv 20-26 20 26 59.2 Sv 20-28 20 28 51.0 Sv 22-30 22 30 53.8 Sv 25-35 25 35 51.0 Sv 30-44 30 44 46.5 Sv 32-40 32 40 64.0 Sv 35-48 35 48 53.2 Sv 36-48 36 48 56.3 Sv 50-65 50 65 59.2

0 notes

ourzhangthings-blog · 6 years ago

Text

Slot Hole Perforated Mesh for Guardrail, Isolation and Screening

Slot hole perforated mesh has slender holes whose end is round or square. Slot hole perforated sheet plays an important role in screening and solid classification. And it is also widely used in decorative application.

https://www.perforatedmetalsupplier.com/products/patterns/slotted-hole-perforated-metal.html

Overview The slot hole of perforated metal has two end shapes: square end and round end, each has straight and staggered patterns. The round end slot hole in staggered pattern is the most popular among all ranges of applications.

Round End 45° Slanted Pattern Round End Staggered Pattern Round End Straight Pattern Square End Staggered Pattern Square End Straight Pattern Slot hole perforated metal with 45° staggered pattern, its both ends are round. SLPM-05: Ld 10 × 30 – 25 × 25 slot hole perforated metal Model Ld 10 × 30 – 25 × 25 a (mm) 10 b (mm) 30 t (mm) 25 t1 (mm) 25 P (%) 44.6 Thickness (mm) 1.0–3.0 Materials SS, Gal, Al, Cu, etc. Dimensions 1 m × 2 m 1.22 m × 2.44 m Customization available CALCULATOR Open area formula Common Specifications H2 Here are some common ordering specifications of the slot hole perforated metal. We can also provide more, if you have special requests, please contact us.

Round End 45° Staggered Pattern Item a (mm) b (mm) t (mm) t1 (mm) P (%) Ld 8 × 40 – 44 × 22 8 40 44 22 31.6 Ld 8 × 45 – 44 × 22 8 45 44 22 35.8 Ld 8 × 56 – 54 × 54 8 56 54 54 14.9 Ld 10 × 25 – 26 × 26 10 25 26 26 33.8 Ld 10 × 30 – 25 × 25 10 30 25 25 44.6 Ld 10 × 30 – 30 × 30 10 30 30 30 30.9 Ld 10 × 56 – 54 × 27 10 56 54 27 36.9 Ld 12 × 39 – 38 × 38 12 39 38 38 30.3 Ld 16 × 60 – 80 × 50 16 60 80 50 22.6 Ld 20 × 45 – 42 × 42 20 45 42 42 46.1 Slot hole perforated metal with staggered pattern. Its both ends are round. SLPM-04: Lv 4.75 × 20 – 15 × 25 slot hole perforated metal Model Lv 4.75 × 20 – 15 × 25 a (mm) 4.75 b (mm) 20 t (mm) 15 t1 (mm) 25 P (%) 48.1 Thickness (mm) 1.0–3.0 Materials SS, Gal, Al, Cu, etc. Dimensions 1 m × 2 m 1.22 m × 2.44 m Customization available CALCULATOR Open area formula Common Specifications H2 Here are some common ordering specifications of the slot hole perforated metal. We can also provide more, if you have special requests, please contact us.

Round End Staggered Pattern Item a (mm) b (mm) t (mm) t1 (mm) P (%) Lv 1 × 10 – 7 × 14 1 10 7 14 20.0 Lv 1.5 × 12 – 10.3 × 16 1.5 12 10.3 16 21.3 Lv 1.5 × 20 – 4 × 50 1.5 20 4 50 29.5 Lv 2 × 10 – 10 × 15 2 10 10 15 25.5 Lv 2 × 20 – 10 × 25 2 20 10 25 31.3 Lv 2.1 × 20 – 5 × 25 2.1 20 5 25 65.7 Lv 2.4 × 20 – 5 × 25 2.4 20 5 25 74.8 Lv 3 × 20 – 5.5 × 25 3 20 5.5 25 84.5 Lv 3 × 20 – 8 × 26 3 20 8 26 55.8 Lv 3 × 20 – 14 × 26 3 20 14 26 31.9 Lv 4 × 20 – 10 × 25 4 20 10 25 61.2 Lv 4 × 25 – 6.5 × 45 4 25 6.5 45 66.0 Lv 4.5 × 20 – 8 × 25 4.5 20 8 25 85.6 Lv 4.5 × 25 – 7 × 60 4.5 25 7 60 51.5 Lv4.75 × 20 – 15 × 25 4.75 20 15 25 48.1 Lv 5 × 20 – 20 × 25 5 20 20 25 37.9 Lv 5 × 30 – 9 × 35 5 30 9 35 91.8 Lv 6 × 20 – 24 × 24.8 6 20 24 24.8 37.7 Lv 6 × 20 – 26 × 40 6 20 26 40 21.6 Lv 7 × 20 – 13 × 47.5 7 20 13 47.5 41.9 Lv 7 × 25 – 12 × 30 7 25 12 30 91.4 Lv 7 × 25 – 30 × 30 7 25 30 30 36.5 Lv 8 × 40 – 26 × 47.5 8 40 26 47.5 49.6 Lv 10 × 40 – 20 × 50 10 40 20 50 75.7 Slot hole perforated metal with straight pattern. Its both ends are round. SLPM-03: Lg 4.5 × 20 – 8 × 25 slot hole perforated metal Model Lg 4.5 × 20 – 8 × 25 a (mm) 4.5 b (mm) 20 t (mm) 8 t1 (mm) 25 P (%) 42.8 Thickness (mm) 1.0–2.5 Materials SS, Gal, Al, Cu, etc. Dimensions 1 m × 2 m 1.22 m × 2.44 m Customization available CALCULATOR Open area formula Common Specifications Here are some common ordering specifications of the slot hole perforated metal. We can also provide more, if you have special requests, please contact us.

Round End Straight Pattern Item a (mm) b (mm) t (mm) t1 (mm) P (%) Lg 2.4 × 20 – 5 × 25 2.4 20 5 25 37.4 Lg 3 × 25 – 8 × 29 3 25 8 29 31.5 Lg 4.5 × 20 – 8 × 25 4.5 20 8 25 42.8 Lg 5 × 30 – 9 × 35 5 30 9 35 45.9 Lg 6 × 38 – 11 × 52 6 38 11 52 38.5 Lg 7 × 25 – 18 × 35 7 25 18 35 26.1 Lg 8 × 40 – 14 × 92 8 40 14 92 23.8 Lg 20 × 40 – 28 × 50 20 40 28 50 51.0 Lg 20 × 40 – 28 × 48 20 40 28 48 53.1