padmashri12-blog

[padmashri12-blog]

Clean Rooms and its Types by Padmashri Steel

Well, if you are looking for the best clean room supplier in Pune and Goa, India then Padmashri steel is one of the best options to look for. They are the renowned clean room manufacturers having 10+ years of experience in this industry.

So, how do cleanrooms work?

Cleanrooms use HEPA (high efficiency particulate air) or ULPA (ultra-low penetration air) filtration to eliminate particles from the air and generate an ultra clean environment. An adequate air changes per hour and laminar air flow is applied to decrease particulate count from around 500k/ft3 (in typical office space) to as low as 100k/ft3 (class 100 cleanroom).

To avoid contamination from entering the cleanroom, airlocks are used. Besides, workers usually have to wear cleanroom garments like booties and bunny suits in the clean rooms so that they don’t bring any contaminants into the room. Eating and drinking is also banned in cleanrooms.

What are the Different Types of Cleanrooms?

As cleanroom work is varied in nature, cleanroom facilities exist as portable, modular as well as fixed building structures. And modular cleanrooms, stick-built cleanrooms (or standard), and softwall cleanrooms are the most common types of cleanrooms.

In modular cleanrooms, prefabricated modular wall system is used which allow faster installation, easy modification(s), and reasonable cost. On the other hand, stick built or standard cleanrooms are dependent on conventional steel stud(s) drywall construction and are slightly cheaper. Whereas softwall cleanrooms make use of clear vinyl curtains which are suspended from metal frames.

For more details visit at

https://www.guidesking.com/business/an-overview-about-clean-rooms-and-its-types-a-guide-for-2022/

[padmashri12-blog]

High Speed Roll Up Door: One of the Most Effective Cold Room Doors

Advantages of high speed rollup doors:

In cold operations, when frequent material-handling operations are necessary, doors with slightly lower (sufficient) R-values and fast cycle times helps reduce air infiltration which offers more practical solution. And high speed roll up doors works the same way delivering immediate results and additional benefits. These doors also help in maintaining correct room pressures, proper air-circulation rates, and best possible operating efficiency.

·       High-speed doors perk up climate control and safety and thus act as the best solution for climate-controlled facilities. To save money, keep the products away from frost, and to protect equipments from condensation, an insulated high-speed door is the perfect fix for you.

·       These doors help in reducing operational costs as they are self-repairing and low-maintenance which drops the downtime to an absolute minimum.

·       With faster doors, materials-handling operators have less opportunity to run into the doors. Also, employees and forklift operators don’t spend much time waiting around that leads to enhanced productivity.

·       High-performance doors make use of an air-tight seal, an insulated curtain and smart open positions which all together minimizes air exchange and condensation. So, floors stay dry and ice build-up doesn’t happen.

·       An enhanced climate control leads to reduced energy costs.  

·       Employing high speed doors helps protect your products and equipment from frost damage.

·       Due to a tighter seal, high speed doors keep cold air in and warm whereas the moist air out.

·       Using these doors means no scraping ice off the ceiling and the door on a regular basis so only minimal attention is required.

·       Some high speed rollup doors consist of washdown capabilities and antimicrobial materials that make them well suited for use in food and pharmaceutical industries.

In food and pharma applications, which are two of the largest segments of cold operations, such doors also aid in retaining clean operations and food product integrity. They deal with food facility needs for environmental control, productivity and safety as well as cleanliness. In cleanroom applications, these doors are used to prevent cross-contamination.

At Padmashri Steel, being a renowned cold room door manufacturer  , from Pune, Goa India. We have seen our clients valuing roll-up doors’ functionality and the service provided by this door is just incredible.

For more details visit us at : https://www.guidesking.com/business/industry-best-choice-high-speed-roll-up-door-for-cold-room-by-padmashri-steel/

[padmashri12-blog]

Different types of cold storage doors available at Padmashri Steel

Padmashri steel, leading manufacturing and supplier of cold storage doors, is engaged in offering a comprehensive range of cold storage doors. We have carved a niche amongst the most trusted names in our manufacturing industry and supplier of cold storage doors. 

Cold storage has become one of the vital components of many industries. But a cold storage door is a version of controlling positive temperature and low temperature with an overhead runway. Moreover, industries like food and pharma have an excellent use for cold storage doors but depending upon which type of industry is and which door is suitable, let us know about that in detail. 

In detail, let us understand more about the different types and ranges of cold storage doors.

Swinging Doors

Swinging doors are single and double-panel doors generally used for walk-ins where solid environmental control is required. Possibly larger swing doors allow large machinery or equipment to pass through easily. 

The door can be customized as per availability and requirement. The design considers both the accounts like door swing and travel clearances required while entering/exiting. We are experts in designing as a cold storage manufacturer in locations like Pune, Goa and Maharashtra, India. 

Generally, swinging doors are used for building applications, and it is cold storage doors that make them unique and attractive. It gets easy while installing, and the cost is also budget-friendly, supposedly lower price. 

Sliding Doors

Sliding doors are an enclosure that hangs on the track of single or double sliding cold storage doors. Horizontal doors are designed for heavy-duty, high cycle applications where forklifts and other equipment are used.

The design wing is not factored for horizontal doors, but the adjacent wall area to the door needs to be. The wall area needs to be clean so the door can be smooth and work properly. It is highly recommended to use large doorways. 

Roll-up doors 

Roll-up doors help to meet essential cold storage requirements, which use minimal energy, stable temperature, prevention of icing, and cold chain. The door is sealed with a high-speed freezer that keeps the room cold and hot air outside the room. 

Firstly, it saves energy with the help of a closed-door cycle. As a cold storage supplier, we have seen our clients appreciate roll-up doors' functionality. The service provided by this door is incredible; not just this but the refrigerator's efficiency is also fast and automatic depending on the storage of the room. 

The best use is in the industry like food, logistic services and many more. This type of door can be used where plenty of things need to be frozen at automatic temperature. 

Hinged Doors 

These are standard cold storage doors. Various lock alternatives are available that are suitable for mounting on panels and walls. There should be wing thickness and also passage measurements for installing these doors. 

Hinged doors are made up of aluminum or PVC frames, but coating alternatives are also replaced by polyester, PVC chrome, and metal steel. These doors are also called 'right' or 'left' depending on the hinges that open on the corresponding side. 

As a cold storage supplier, we recommend that these doors be readily installable and cost-friendly.

Flip Flap Doors 

Flip flaps are semi-insulted that can open and close at a high-speed point between cold rooms and open when required. These are flexible doors. The food industry makes the maximum usage and follows to achieve maximum hygiene and safety. 

These flip flaps doors are not only accessible but also maintenance-free. The factors of these doors are highly attractive not only for the food industry but also for workshops, moist rooms, and many more.

Being maintenance-free and quality-oriented, the designs offer an option that is hard to beat. 

For more details visit at

https://www.guidesking.com/business/what-are-the-different-varieties-of-doors-you-must-know-in-cold-storage/

[padmashri12-blog]

Everything You Should Know about Polycarbonate Roofing Sheet

Padmashri steel is a leading polycarbonate roofing sheet manufacturer in Pune, Maharashtra & Goa India. We offer various benefits and features at the best rate.

For years, we have been engaged as a polycarbonate roofing sheet manufacturer.

Today polycarbonate sheet has many benefits that ensure their usability. However, some of its most important benefits are listed below.

Benefits of Polycarbonate Sheets

●      Easy to use

Polycarbonate is light and durable in weight, making it easy to use anywhere. Apart from this, no machinery is required to cut it, because any ordinary scissor can do the same.

●      Meager cost

The overall cost of purchasing Polycarbonate Sheets & their transport is low. You might think how transport cost is low?

The primary reason is its lightweight, and it is easy to transport Polycarbonate Sheets.

●      Versatility

Polycarbonate is more robust and flexible; it is used to design anything creatively, like shaping it in glass-like shapes. It also maintains its shape, color, and transparency for longer years. It is a long-term investment that lasts for 30-40 years.

●      Sound blocking

The most significant advantage of polycarbonate is that it plays the most prominent role in blocking the sound, making it the most popular material in the sound jamming area. It is used mainly in places like cabins.

●      Sun resistance

Polycarbonate has excellent protection against UV rays as one side of the sheet is protected with a UV layer; thus, it blocks the sun's heat and creates

a calm environment indoors. This helps in greenhouses buildings as it cuts down harmful UV radiations from the sun.

For more details visit us at

https://www.guidesking.com/business/polycarbonate-roofing-sheet-everything-you-should-know/

[padmashri12-blog]

How to Choose Cold Room Door?

Are you unsure about things to consider before choosing a cold room door?

Well, you have landed at the right place.

At Padmashri steel (a cold room door manufacturer, cold room door supplier, and retailer), we guide you and make things simpler for you. Let us understand what a cold room door is.

A cold room door is a closed room and a type of refrigerator specially to generate temperature as low as freezing point. Majorly cold rooms are used to maintain relative temperatures for products like perishable items, food items, or pharma products such as vaccines and injections, which are kept under specific temperatures.

Further, let us look at how to select a cold room door.

Parameters to keep in mind while selecting a cold room door

●      Environmental factor

It is a significant factor as product quality depends entirely on the temperature.

For example, Food is entirely dependent and alerted to environmental control. As soon as it is lost, it is highly likely to change into bad condition, so it needs to be stored in a cold room to maintain quality.

The type of temperature range of the door is also considered one of the critical factors. It does have a minimum temperature and a maximum temperature. The door type depends upon the environment, maintaining the capacity it carries away.

●      Efficiency factor

The level of efficiency each door has is not the same. And choosing the right door can make a vast difference concerning improving the energy and efficiency level.

For example, a fast-operating door will help the products move quickly, reducing the door opening time and adding a difference in temperature holding. Thus, an expert person needs to take a proper analysis of energy and efficiency while choosing the door.

●      The industry you work in

Padmashri steel in Pune Maharashtra India, a leading cold room door manufacturer, deals with various industries, and the results observed so far are the best. We regularly work in the following sectors.

●      Pharmaceuticals.

●      Medical devices

●      Electronics

●      Automobiles

●      Food and nutraceutical food ingredients.

For more details visit us at https://www.guidesking.com/business/things-to-consider-how-to-choose-cold-room-door/

[padmashri12-blog]

Cold Storage Door

we are engaged in providing a wide range of Cold Storage Door. with the special features like High Thermal Resistance, Mechanical Resistance, Dimensional Stability, Non-Water Absorbent, Lightweight, Aesthetically Pleasing Appearance.

[padmashri12-blog]

Cold Room Door Manufacturer

We offer our clients a wide range of Cold Room Door which is simple in design, easy to install, great functional, ready to use and robust in construction, Known for their amazing strength, rigidity, high thermal and acoustical results.

[padmashri12-blog]

Clean Room  Door Manufacturer

   Our Clean Rooms are widely installed in several applications such as pharmaceuticals, medical devices, electronics, automobiles, food industry, etc., Outstanding load-bearing capacity, Hygenic, Odorless, Long life, and durable products.

[padmashri12-blog]

Pre-Engineered Buildings

We are Pre-Engineered buildings manufacturers. custom-designed to meet your exact requirements, Lightweight, Speedy construction, Low maintenance, Easy installation.

[padmashri12-blog]

Indian Cold Storage Market Trend 2019

Read this latest Press Releases on Cold Storage, recent trends, growth, and benefits.

[padmashri12-blog]

The Purpose of Cold Storage and How it is Helping the Different Industries

Read this latest Blog on Cold storage and how it is helping the different industries.

[padmashri12-blog]

Z & C PURLINS

Our purlin is manufactured with excellent quality materials and advanced techniques in combination with the market standards. Savings of transportation & handling, fabrication costs, No wastages, No surplus left-overs, since sections are supplied in exact required lengths.

[padmashri12-blog]

Turbo Ventilator

We are providing you the best range of Turbo Ventilator, Roof Top Aluminium Ventilator, Turbine Roof Ventilator and Stainless Steel Roof Ventilator with excellent Quality and provide timely delivery.

[padmashri12-blog]

Roofing Sheet

 We at Padmashri Steel offers best quality Roofing Sheets for our clients, including Galvanized Roofing Sheet, Color Coated Roofing Sheet, Polycarbonate Roofing Sheet, Industrial Roofing Sheet, and Corrugated Roofing Sheet.

[padmashri12-blog]

Sandwich Puf Panel

We are Padmashri Steel Manufacturer of Sandwich Puf Panel load-bearing capability many times greater than others. Comparatively thin, relatively lightweight Sandwich Puf Panels can safely bridge wide spans.