prasadgowtham-blog

[prasadgowtham-blog]

Top 5 .NET Blog You Should Follow Today

Are you a .NET developer or want to be one? If yes, then this article is for you. In this article, we have a given brief introduction about .NET, why it is essential and in the end, we have mentioned 10 blogs that you must follow being a .NET developer. The technological advancement is taking at a rapid pace. So, it is very essential to keep yourself updated with changes taking place. These blogs will keep you updated about the latest development in the .NET world. Learn Asp.net Training in Chennai at Metaforum Technologies.

1. Scott Hanselman’s Blog:

Scott is a programmer, teacher, and speaker. He works from home office in Portland, Oregon for Web Platform Team at Microsoft. The man loves to blog about technology, gadgets, and the web. He is a genius in the field of programming. You will learn a lot by visiting his site. You can also follow his YouTube channel, Twitter, Instagram.

Link to his site:

https://www.hanselman.com/blog/WhatNETDevelopersOughtToKnowToStartIn2017.aspx

2. K Scott Allen’s OdeToCode:

K Scott Allen blog name is OdeToCode. He is a teacher, writer, and conference speaker. He has more than 25 years of commercial software development experience. He has successfully delivered products for embedded and Web Platforms. Following such expert will be a significant advantage to you. He has written several books. Allen also prefers to write about ASP.NET and latest development related to Microsoft Azure. He hosts a Herding Code podcast.

Link to his site

https://odetocode.com/about/scott-allen

3. Mike Brind ‘s Mikesdotnetting.com

The site clearly mentions that it contains collections of tutorials and articles on web development with ASP.NET. While the first two in our list write about different technology too, but this is dedicated to ASP.NET. You can learn here about ASP.NET, Razor Pages, and ASP Classic. Mike is the best person to follow about recent development on new Razor Page Updates. He is spent considerable time explaining about Razor Page Updates. You can follow him on Twitter.

Link to the site:

https://www.mikesdotnetting.com/

4. Iris Classon’s irisclasson.com

What can be more interesting than to learn directly from the Microsoft Most Value Professional? Yes, Iris Classon is Microsoft C# MVP and has a passion for programming. She is a source of inspiration for all budding programmer. Back in2011, a registered and clinical dietician she went on to become Microsoft MVP professional. You can follow her on YouTube, Twitter and GitHub. She is a member of the Microsoft Extended Experts Team. She talks about Azure, C#, Azure, DevOps and

.NET core.

Link to the site:

http://irisclasson.com/about-iris/

5. Derek Cromartin’s Code Opinion:

Derek Cromartin’s has 17 years of professional experience. He is a software developer and Microsoft MVP. He loves to write about Microsoft Visual Studio and the latest development related to MVP. If anyone interested in the architectural patterns like CQRS and Event Driven, then this is the perfect blog for them. He covers these topics on YouTube channel as well. He discusses in detail related to .NET core, CQRS and ASP.NET. You can also follow on Twitter, GitHub, and LinkedIn.

Link to the site:

https://codeopinion.com/

.NET is a world-shattering advance in programming technology platform that greatly simplifies rich internet web application development. Metaforum Technologies offer the Best Dot Net Training in Chennai. If you are interested to learn Dot Net Programming. Just join Metaforum Technologies ans start your career in right path.

[prasadgowtham-blog]

If you are looking to enhance your knowledge in Automation Testing,then enroll in the Best QTP Testing Training Institute in Chennai with Metaforum Technologies,Vadapalani.

[prasadgowtham-blog]

Few Testing Methods for Software Testing :

1.Destructive Testing:

Ø  The destructive testing is about breaking the software application to assess their quality. It is done intentionally to check the robustness of the software and find out the point of failure.

Ø  It checks the unpredictable behaviour of the application. The most interesting thing is that there is no need to understand the original requirements of a software product.

Ø  The benefits of this testing is that it helps to understand predictable behaviour when the software is put in unfavourable conditions.  

Ø  During destructive testing, proper and improper software behaviour is checked. Also, improper usage, improper input data and proper output data are checked.

Ø  The destructive testing can be used with other testing like Alpha/Beta Testing, Regression Testing, Acceptance Testing, etc.

Ø  There are some conditions in destructive testing such as the software will not process invalid input data  and  output data should always be correct regardless of the type of input data is given.

 2.Fault Injection Testing:

 Ø  It is done by introducing a fault in the code for testing the robustness of the application and its capabilities in the error handing.

Ø  When the fault is introduced directly into the code it is called compile – time injection and when the fault is introduce through the software triggers to cause specific scenarios in a running system it is called runtime injection.

Ø  The purpose is to ensure that the system is able to recover from the fault and identifies the design weakness where even a single fault could lead to severe error or systemic failure.

 3.Endurance Testing:

 Ø  This testing is also known as soak testing. It is done to check whether the application can sustain the load for the long time or not. It is a type of non-functional testing.

Ø  The system reaction parameter is measured by examining the system whether it can sustain a huge load for a longer period of time.

Ø  The benefits of this testing is that it helps to find out the critical memory leaks that may lead to the crash of an operating system.

Ø  The failure to close connections between the layers of the system may leads to stop working of modules of the system. The failure to database connections may lead to system crash.

 4.Equivalence Partitioning Testing:

 Ø  There is time and budget constraints so it is not possible to do exhaustive testing for each set of test data.  The tester needs to intelligently select test cases from the pool of data that covered all the scenarios.

Ø  In this technique the input data is divided into different equivalence data classes. The advantages of this testing is that it gives clear guidelines for determining the test cases without comprising the effectiveness of the data.

 Learn  Software Testing Training in Chennai at Best Institute Metaforum Technologies. Training offered by Experienced MNC Experts, By giving the perfect placement training and knowledge, we are the best provider of Software Testing Institute in Chennai.

Our  Software tester trainers are having more than 6+ years of experience and they will give knowledge about placement also. Our Trainers are Certified Staffs’ we give 4 Real time projects in training period that will help you understand the End to End solution. We offer Software Testing Course in Chennai certification.

[prasadgowtham-blog]

3 Types of Testing in QTP/UFT Automation Testing

1.Dynamic Testing:  

It is also known as control flow based testing. This test type of testing is done to make sure that every part of the program is functioning properly.

Every branch, code, statements and conditions are covered by this test. The branch testing evaluates that whether the program is switching from one loop to another.

The statement testing covers every line of code in a statement. The condition testing validates the accuracy of condition in the code. The path coverage checks whether the program is following the sequence of flow or not.

 2.Cyclomatic Complexity:

 This technique is done through control flow graph and thus helps in verifying all coverage nodes.

The risk to modify is lower and easier to understand if the value of Program’s Cyclomatic Complexity is lower.

 3.Static Testing:  

 This testing is also Non- Execution technique or verification testing. It is done in the early phase of the software development cycle.

In the static testing software testing is done manually but they are not executed. It doesn’t need the computer as programs are tested without executing them.

It is done to find and remove errors in work document such as requirement specifications, test cases, test scripts, test plans, web page documents. Static testing involves code inspection, walkthrough, review and audit.

·  Inspection: A review process which follows a definite set of guidelines and checklists with a predefined entry and exit conditions. The code is compared with the previous documents specifications and at the end it is compared with all the necessary information that is required to improve the new document.

·  Walkthrough: The primary aim of this process is to read the document, raise questions by team members so that they can understand the documents properly and identify defects and highlight it if there are any defects in the document.

·  Review: It is also known as peer review process. The other programmer checks the code in order to find any bugs in the software.

· Audit: It is a review process in which it is examined that all the protocols have been followed or not. In this technique a program code is analysed in terms of specification, security breaches, etc.

 The advantages of static testing is that defect can be detected early in the life cycle so early feedback on quality issues.The costs in doing the same work is reduced as the defects are spotted early. This also increases the productivity. It increases the quality awareness in the program.

 Learn QTP  Training in Chennai at Best Institute Metaforum Technologies. Training offered by Experienced MNC Experts, By giving the perfect placement training and knowledge, we are the best provider of QTP Training Institute in Chennai.

Our QTP Software tester trainers are having more than 6+ years of experience and they will give knowledge about placement also. Our Trainers are Certified Staffs’ we give 4 Real time projects in training period that will help you understand the End to End solution. We offer QTP  Course in Chennai certification.