rahimasvr

[rahimasvr]

Pneumatic Actuated Ball Valve manufacturer in USA

SVR Global is the top Pneumatic actuated ball valve manufacturer in USA. We make high quality products as per international standards with our team of experts.

The Pneumatic Actuated Ball Valve Actuator is a double-piston actuator, specifically designed for operating ball valves and flaps. This actuator comes in two versions, namely the double-acting and single-acting models. The Pneumatic Ball Valve, which regulates the flow of liquid or gas through a ball with a bore, is a robust valve that shuts off perfectly. Its exceptional safety features ensure quick and secure shutdown, making it a popular choice in various industrial applications. Its efficient performance makes it even more appealing.

SVR Global is thepremium  Pneumatic actuated ball valve manufacturer in USA and is used in throttling applications for smooth flow of mediums.

Parts

Valve body: The valve body is the main housing that contains the ball and the ports through which the fluid flows.

Ball: The ball is a spherical component inside the valve body that rotates to open and close the valve.

Seat: The seat is a ring-shaped component that fits around the ball and provides a seal when the valve is closed.

Stem: The stem is a component that connects the ball to the actuator and is used to rotate the ball.

Actuator: The actuator is the device that converts compressed air into mechanical force to rotate the ball.

Mounting bracket or coupling: The mounting bracket or coupling is used to connect the actuator to the valve body.

Control system: The control system is a set of components that allow the valve to be operated remotely, such as a solenoid valve or control panel.

Accessories: Additional components may include limit switches, positioners, or other accessories that provide additional control or feedback for the valve.

TYPES

Pneumatic Actuated two-piece ball valve

Pneumatic Actuated Three-piece ball valve

Pneumatic Actuated Flanged ball valve

Pneumatic Actuated Three-way ball valve

Industry

Oil and Gas Industry

Chemical Industry

Textile industry

Petrochemical Industry

Mining Industry

Marine Industry

Features of Pneumatic Actuated Ball Valve: • Provides tight and safe shutoff. •It has a quick opening and shutting capabilities. •It is compact and simple to use.

Applications:

Chemical processing: Pneumatic actuated ball valves are commonly used in chemical processing applications to control the flow of chemicals and other fluids.

Water treatment: used in water treatment applications to control the flow of water and other liquids.

Oil and gas industry: used in the oil and gas industry to control the flow of oil and gas through pipelines and other equipment.

Advantages:

Fast operation: Pneumatic actuated ball valves are capable of fast and efficient operation, making them suitable for applications that require quick response times.

Reliable: These valves are known for their high reliability and durability, which makes them suitable for use in a wide range of industrial applications.

Easy to maintain: Pneumatic actuated ball valves are relatively simple to maintain, which can help to reduce downtime and maintenance costs.

Versatile: These valves can be used with a wide range of fluids, including gases, liquids, and slurries.

Good flow control: The design of the ball valve allows for good flow control, which can help to improve the efficiency of a system.

Body: cast iron, cast steel (WCB, WCC, WC6, LCC, LCB), carbon steel (CF8, CF8M), titanium, stainless steel (SS304, SS316, A105, F304, F304L, F316, F316L). Class: 150-2500, PN 10 – PN450. Size: ½” to 48” Ends: socket weld, butt weld, flanged, threaded Operation: pneumatic actuated

Visit our website for more information-

 

https://svrglobal.net/products/pneumatic-actuated-ball-valve/

[rahimasvr]

Dual Plate Check Valve Manufacturer in USA

SVR Global is the most reputed and leading dual plate check valve manufacturer in USA. A dual plate check valve is a type of check valve that consists of two plates or discs that are hinged together in the center. The plates are designed to open in response to fluid flow, allowing fluid to pass through the valve, and then close to prevent backflow. This design allows for a more compact valve than traditional swing check valves and provides for a faster response to changes in fluid flow.

The dual plate check valve operates by utilizing the kinetic energy of the fluid to push the plates open against the force of gravity and any springs or weights that may be used to assist in closure. When the fluid flow stops or reverses direction, the plates close under the influence of gravity and any spring or weight.

Dual plate check valves are commonly used in a variety of industries including water treatment, oil and gas, chemical, and petrochemical. They are typically used in applications where a reliable and fast-acting valve is required to prevent backflow or protect pumps and other equipment from damage.

Parts of a Dual Plate Check Valve:

Body: The main body of the valve, which contains the two plates and the hinge mechanism.

Plates: Two plates or discs that are hinged together in the center.

Hinge: A mechanism that connects the two plates and allows them to pivot.

Spring: A spring mechanism that helps to close the plates and maintain a seal.

Seals: A set of sealing elements that prevent leakage when the plates are closed.

Types of Dual Plate Check Valves:

Wafer Type: Wafer type dual plate check valves are designed to be installed between flanges and are held in place by bolts or other fasteners. They are generally less expensive and more compact than other types of check valves.

Lug Type: Lug type dual plate check valves are similar to wafer type valves, but they have threaded inserts or lugs that allow them to be bolted directly to a pipeline without the need for separate flanges.

Flanged Type: Flanged type dual plate check valves are designed to be installed between flanges and have a raised face to provide a seal against the flange faces. They are generally more expensive and larger in size than wafer or lug type valves.

INDUSTRIES

Chemical Industry

Pulp and paper Industry

Marine Industry

Mining Industry

Power Generation Industry

Oil and Gas Industry

Nuclear Industry

Petrochemical Industry

APPLICATIONS

Pump protection in water treatment plants and pumping stations.

Preventing backflow in oil and gas pipelines and refineries.

Protection of compressors and turbines in chemical and petrochemical plants.

Protection of fire protection systems and sprinklers.

Protection of industrial boilers and heat exchangers.

In marine applications such as ballast water systems and cooling water systems.

ADVANTAGES

Pump protection in water treatment plants and pumping stations.

Preventing backflow in oil and gas pipelines and refineries.

Protection of compressors and turbines in chemical and petrochemical plants.

Protection of fire protection systems and sprinklers.

Protection of industrial boilers and heat exchangers.

In marine applications such as ballast water systems and cooling water systems.

SVR Global is the  Dual plate check valve manufacturer in USA has the following body material, size, class, ends- Body Material: cast iron check valve, cast steel check valve (LF2, A216, WCB, WCC, LCB, LCC, WC6, WC9), ductile iron check valve, stainless steel check valve [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F91), duplex and super duplex STEEL [ F51, F53,F55 ] forged steel A105, A105N, F11, F22, F304, F316, F91] , alloy20, Hastelloy ALBR. Size: ½” – 80” Class:150 – 2500; PN10 – PN-450 Ends: wafer, lug, flanged

Visit our site for more information

[rahimasvr]

Control Valve Manufacturer in USA

SVR Global is the leading and the top rated Control Valve manufacturer in USA. Control valve is operated electrically and it’s function is to control the flow of fluids through a pipeline as its name suggests. It can sustain smallest to largest capacity of fluid flow in numerous ways. This type of valve alter the spot of the plug or disc to control the flow of medium. It is controlled by an actuator. A control valve receives signal from a controller to change the flow by opening or closing the valve. The control valve manipulates the flow of medium in the form of gas, steam, water, or another suspended medium whenever there is load disturbance. Control Valve manufacturer in USA provides leak-proof, cost-effective valve delivered at your doorstep.

Control valve are used to maintain the process parameters to the optimal points as and when required. The controller set points of this valve are flow rate, pressure, and temperature. They also can sustain fluid static pressure and support seat surface and valve closure elements.

PARTS

Valve body: The valve body is the main housing that contains the valve mechanism and connects to the process piping.

Valve trim: The valve trim includes the internal components of the valve, such as the valve plug, seat, and stem. The valve trim is designed to control the flow rate of the fluid or gas passing through the valve.

Actuator: The actuator is the device that provides the force necessary to move the valve plug and adjust the flow rate. There are several types of actuators, including pneumatic, electric, and hydraulic.

Positioner: The positioner is a device that is used to accurately position the valve plug based on the control signal received from the controller. It is typically used in conjunction with an actuator to ensure accurate control of the valve.

Controller: The controller is the device that receives input from sensors and other sources to determine the desired flow rate, and sends a control signal to the valve actuator to adjust the valve position.

TYPES

Globe control valves: Globe valves are the most common type of control valve. They have a linear motion valve plug that is moved up and down to regulate flow. Globe valves are used in a variety of applications and can be designed for a wide range of temperatures and pressures.

Butterfly control valves: Butterfly valves are another common type of control valve. They have a disk-shaped valve plug that rotates to regulate flow. Butterfly valves are used in applications where low pressure drop and quick shutoff are required.

Ball control valves: Ball valves have a spherical valve plug that rotates to regulate flow. They are used in applications where high flow rates and tight shutoff are required.

Diaphragm control valves: Diaphragm valves use a flexible diaphragm to regulate flow. They are often used in applications where the fluid being handled is viscous or contains solids.

Single seat control valve: A single seat control valve has a single valve plug and seat. It is a common type of control valve used in industrial applications to regulate fluid flow.

Pinch control valves: Pinch valves use a flexible tube that is pinched to regulate flow. They are often used in applications where the fluid being handled is abrasive or corrosive.

Needle control valves: Needle valves have a long, tapered needle-shaped valve plug that is moved up and down to regulate flow. They are used in applications where precise flow control is required.

Three-way control valves: Three-way valves have three ports and are used to divert flow between two different directions or to mix two flows together.

INDUSTRIES

Oil & Gas Industry

Pipeline Industry

Marine Industry

Power Industry

Nuclear Industry

Mining Industry

Chemical Industry

Petrochemical Industry

APPLICATIONS

Chemical Processing: Control valves are widely used in chemical processing plants to regulate the flow of fluids and gases during chemical reactions.

Oil and Gas Production: Control valves are used extensively in the oil and gas industry to regulate the flow of fluids, gases, and other process variables during the production and processing of oil and gas.

Power Generation: Control valves are used in power generation plants to regulate the flow of steam and other fluids used in the generation of electricity.

Water Treatment: Control valves are used in water treatment plants to regulate the flow of chemicals and other substances used in the treatment process.

HVAC: Control valves are used in HVAC systems to regulate the flow of air or water, depending on the specific application.

ADVANTAGES

Precise control: Control valves provide precise control over the flow of fluids, gases, or other process variables, ensuring that the process is operating at optimal levels.

Energy efficiency: Control valves can be used to regulate the flow of fluids and gases to minimize energy consumption, reducing operating costs and improving efficiency.

Safety: Control valves can be used to regulate the flow of hazardous fluids or gases, ensuring that they are handled safely and minimizing the risk of accidents.

Reduced maintenance: Control valves can be designed to operate reliably for extended periods with minimal maintenance, reducing downtime and maintenance costs.

Flexibility: Control valves can be customized to meet the specific needs of a process, making them suitable for a wide range of applications.

Description:

Body Materials: Ductile Iron, Cast iron (WCB, WCC, WC6)  LCC, LCB, Stainless Steel (SS316, SS304),  Super Duplex (F51, F53, F55) Class: 150 to 2500, PN10 to PN450 Operations: Electro Pneumatic and Pneumatic Size: DN15 to DN600 Ends: Flanged, butt weld, socket weld, threaded

Visit our site for more information- https://svrglobal.net/products/control-valve/

[rahimasvr]

Electric Actuated Valve Manufacturer in USA

SVR Global is a leading Electric Actuated Valve Manufacturer in USA. Electric Actuated valve is completely automated and has power and control signals which are connected internally to the motor. The internal controls operate the motors based on the control signals received as it is an apparatus that utilizes a single linear or circular motion to convert electrical energy into kinetic energy. To boost the effectiveness and complexity of the procedure, the valve is automatically closed. Depending on the functions they carry out inside the processes for which they were created, electric actuators come in a variety of sizes and shapes.

Electric Actuated Valve Manufacturer in USA provide valves that are not only cost-effective but also durable and corrosion resistant. An electric actuator valve has an electrical connection that connects to the signal for transmission, the supply cables for the actuator, and the motor commands to actuator.

Parts of Electric actuated valves

1.Valve body

2.Ball or disc

3.Stem

4.Seals

5.Actuator

6.Electrical control system

7.Accessories

Types of Electric actuated valve:

Electric actuated Ball valves: These valves have a spherical ball with a hole in the middle that allows or blocks flow when rotated. Electric actuated ball valves are commonly used in applications that require quick, quarter-turn on/off operation.

Electric actuated Butterfly valve: These valves have a disc or plate that rotates in the middle to regulate flow. Electric actuated butterfly valves are commonly used in applications where low profile and quick operation is required.

Electric actuated Globe valves: These valves have a plug that moves up and down to control flow. Electric actuated globe valves are commonly used in applications that require precise control of flow rate.

Electric actuated Gate valves: These valves have a gate that moves up and down to allow or block flow. Electric actuated gate valves are commonly used in applications where a tight seal is required.

Electric Actuated plug valve: An electric actuated plug valve uses an electric motor or actuator to control the movement of a tapered or cylindrical plug inside the valve body to regulate the flow of fluids.

Industries that use Electric Actuated Valves:

Mining

Chemical

Textile

Power Industries

Boiler industries

Farming and agricultural plants

Pulp and paper plants

Oil and gas

Applications:

Water and wastewater treatment: Electric actuated valves are used in water and wastewater treatment plants to control the flow of water, chemicals, and other fluids in various stages of the treatment process.

HVAC systems: Electric actuated valves are used in heating, ventilation, and air conditioning (HVAC) systems to regulate the flow of hot and cold water in the system.

Process control: Electric actuated valves are used in various industrial processes to control the flow of fluids in pipelines, tanks, and vessels.

Chemical and petrochemical plants: Electric actuated valves are used in chemical and petrochemical plants to control the flow of corrosive and hazardous fluids.

Building automation: Electric actuated valves are used in building automation systems to regulate the flow of water and other fluids in various building systems such as plumbing, heating, and cooling.

Advantages :

Tight shutoff: Electric actuated plug valves provide tight shutoff, which means that they can effectively stop the flow of fluids through the valve. This is particularly important in applications where the fluid needs to be completely contained, such as in hazardous or corrosive environments.

High flow capacity: Electric actuated plug valves have a high flow capacity, which means that they can handle large volumes of fluid. This makes them suitable for use in applications that require high flow rates.

Simple design: Electric actuated plug valves have a relatively simple design, which means that they are easy to install and maintain. They also require minimal maintenance compared to other types of valves.

Quick and easy to operate

Provides tight seal service being an electric operated valve

Low failure Rate

Increased efficiency

Precise control

Consistent contol

Body material-Aluminium

Materials: CF8M, CF8, SS316, CF3M, WCB, and Stainless steel(SS304,

SS316,CF8M, SS316L, SS904L).

Class: 150 to 2500

Size: 1/2" to 80"

Pressure : PN6- PN450

End Connections: Flanged, Socket weld, Butt weld, Threaded, Wafer, Lug

Operation: Electric Actuator.

Electric actuator details-

Torque – 3 – 9 nm

Operating pressure- 8 Bar

Port Connection-NPT1.4”

Mounting Base-ISO5211

Temperature--20°C - +80°C

For more details, visit our website- https://svrglobal.net/products/electric-actuated-valve/