riblath12-blog - Tumblr blog

[riblath12-blog]

Self-Furred Diamond Mesh Lath Working Process and Application

Self Furred Metal Lath is made for masonry surfaces with hardened concrete nails and fasteners. Materials used are usually hot dipped galvanized steel sheets.

https://www.metalriblath.com/self_furred_metal_lath.html

Metal lath used over solid surfaces to be furred approximately ? inch away from the wall to allow for the proper stucco keying behind the lath. Self-furred diamond mesh lath has a surface studded in dimples or embossed “V” groove that provide the required ? inch of furring. Fastener placement should be arranged so as not to negate the furring mechanism.

Self-Furred Diamond Mesh Lath is secured to masonry surfaces with hardened concrete nails and power driven fasteners at the furring dimples. Paper backed lath is often used in this type of application as a bond breaker.

Self Furred Metal Lath  Self Furred Metal Lath

[riblath12-blog]

Welded Wire Lath as Stucco Material for Building Construction

Welded wire fabrics can be used in making of metal lathing products. Made from quality galvanized carbon steel wire, welded wire mesh fabrics offer good corrosion resistance and oxidation resistance.

https://www.metalriblath.com/welded_wire_lath.html

Welded Wire Lath should be used as base for gypsum plaster with absorbent paper-backing or slot-perforated separator. Stucco makes a very good exterior wall finish. It is applied over lath, which can be made of zinc coated, or galvanized metal, galvanized woven wire fabric or galvanized welded wire fabric. These mesh materials allow the stucco to go into the openings and adhere well to become stronger. The wire needs to be galvanized to help protect against rust. Different gauges of wire are available but the most commonly used is eighteen gauge wire.

Mesh opening of welded wire lathing: 3/4", 1/2", 1", 1/4", 3/8".

General wire gauge (BWG): 14# to 23#.

Welded Wire Lath  Welded Wire Lath

[riblath12-blog]

Diamond Metal Lath, Expanded Metal Lath Same Feature and Use

Diamond Mesh Lath makes excellent plaster base and reinforcement for the following construction uses:

https://www.metalriblath.com/diamond_mesh_lath.html Walls; Ceilings; Fireproofing of steel beam, and columns.

Diamond Mesh Lath  Diamond Mesh Lath

Diamond mesh lath is easy to cut and form to ornamental plaster work and it provides ample keying for scratch coat. These features enable diamond mesh lath commonly used for plaster machine application. Material: Hot dipped galvanized steel or zinc coated carbon steel.

[riblath12-blog]

Flat Rib Lath as One Type Metal Lath Features and forms of Use

Flat Rib Lath is a kind of metal lath that is more rigid than diamond mesh laths.

https://www.metalriblath.com/flat_rib_lath.html

Flat Rib LathFlat Rib Lath Features: More rigid; Greater stiffness; Wider spacing; Easy keying of plaster.

Forms of Using: Flat rib lath is available in paper-backed in either K (Kraft) paper, or with D paper.

Materials: This kind of rib lath is manufactured from high quality galvanized steel with zinc coating. Sizes and specifications can be customized.

[riblath12-blog]

Stainless Steel Rib Lath as Expanded Lath and High Rib Lath Type

We have announced the introduction of SS304 and SS316 to its industry-leading

https://www.metalriblath.com/stainless_steel_lath.html

 lath product offering, now enabling architects, contractors and customers of all size and scope to order the maximum protection of stainless steel lath in a cost effective, timely manner. Listed as "Stainless Steel Lath" in the Metal Lath and Accessories catalog, we supply two newest standard lath offerings include: SS304 . Available as a product providing an excellent corrosive resistant material for specialty lath applications. . Product can be used over insulation boards to carry conventional stucco finishes and for external. insulation requirements. SS316 . Used for swimming pool applications to provide an additional resistance to pool cleaning chemicals. . Also used for lathing in coastal locations where atmospheric salt is a concern.

Stainless Steel Lath  Stainless Steel Lath

Size:

Model Type Alloy Sheet size sheets/bundle SS1.75 1.75lbs 304 or 316 27?" × 96" 10 SS2.5 2.5lbs 304 or 316 27?" × 96" 10 SS3.4 3.4lbs 304 or 316 27?" × 96" 10

[riblath12-blog]

Spray lath V Ribbed for Exterior Stucco Work, Rib Lath Stucco

Spray lath is used primarily on the West coast, where stucco is spray applied to the surface of the lath to build stucco thickness. Rib Lath is often attached directly to the vertical framing members without a solid board substrate included. Spray products are categorized as follows:

https://www.metalriblath.com

Use: For exterior stucco work over sheathing and as a plaster base over masonry walls. Self-furring embossed "V" groove holds the lath away from the surface to aid in the keying of stucco to the lath.

Spray Lath V RibbedSize: 27" × 96" (686mm × 2440mm)

Weights: 3.40lbs/yd2 - (End Painted Red w/ Yellow Stripe) Installation: Spray Lath - V-Ribbed is intended for applications not requiring a water resistant barrier. The plain kraft paper is applied between V grooves to conserve machine applied stucco and allows visual location of studs during installation.

[riblath12-blog]

Paper back metal lath, diamond mesh lath, rib lath

Ti lath (Paper Back Metal Lath) is diamond mesh lath, regular or self-furred, to 

https://www.metalriblath.com/paper_back_metal_lath.html

which offset asphalt saturated kraft building paper has been applied. The grade D paper typically used is water resistant, yet highly vapor permeable. Ti lath reduces moisturePaper Back Metal Lath penetration while allowing for the dissipation of moisture vapor from within the structure. A foundation weep screed at the bottom of all framed walls aids in the evacuation of any moisture that might reach the surface of the building paper. (Required by most codes) The offset paper, which is recessed from one end and one side and overhangs on the opposite end and side, allows the applicator to easily install this product correctly as prescribed by ASTM C1063. This specification requires that paper be ship lapped, paper-to-paper and metal-to-metal for proper installation. Ti lath is ideal for use as a base for tile and traditional stucco. The paper backing aids in plaster keying and stucco curing, protection of the sheathing during curing, and provides moderate water resistance. Self-furred Ti lath is provided with "V" groove self-furring mechanisms.

Size:

Model Type Sheet size PCS/BDL PCS/PLT PB1.75 1.75lbs 27" × 96" 10 500 PB2.5 2.5lbs 27" × 96" 10 500 PB3.4 3.4lbs 27" × 96" 10 500

[riblath12-blog]

Metal Rib Lath for Brickwork Reinforcement Application

mbedded in the normal thickness of a brickwork joint, expanded metal 

https://www.metalriblath.com/brickwork_reinforcement.html

reinforcement reduces the detrimental effects of vibration and changes of temperature. The application gives brickwork increased resistance to tensional stresses. The brickwork reinforcement (coil mesh) assists resistance to tensile stresses where settlement occurs. Easily incorporated into mortar course, coiled for ease of handing.

Brickwork ReinforcementApplications:

concrete slabbing, roads, paving, foundations, marine work, bank strong rooms, partition slabs, concrete block work, asphalt guttering etc.

Installation:

Fix into mortar between brick courses leaving 25mm clearance from face of brickwork. All joints require an overlap of at least 75mm. The mesh can be laid every third brickwork course for most reinforcement.

Material: Galvanized steel, stainless steel. Width: 65mm, 100mm, 175mm, 225mm, 300mm. Length: 20m.

Size:

Model SWD × LWD Coil width Length BR100 15mm × 25mm 100mm 20m BR150 150mm 20m BR200 200mm 20m BR305 300mm 20m

[riblath12-blog]

Expanded Metal Lath or Diamond Metal Lath Introduction, Uses

Metal Lath is available in expanded metal lath, self-furred, paper-backed, flat-ribbed, diamond mesh and high ribbed lath. Our metal lath is mainly manufactured from hot dipped galvanized expanded steel sheets.

https://www.metalriblath.com/expanded_metal_lath.html

Enzar Metal small mesh metal lath is ideal as a plaster base and reinforcement for all types of construction-walls, ceilings, ad fireproofing of steel beams ad columns. It is easy to cut and form to ornamental plaster work.

Sizes and types available: The expanded metal lath is available in 1.75, 2.5, and 3.4 pounds per square yard. All expanded metal laths are available in either flat, self-furred (dimpled of grooved), or in combination with paper-backing with D, Double-D, or K paper.

Benefits of Using Expanded Metal Lath:

Stronger finished sheet products with lighter weight;

Suitable for decoration due to the variety of pattern types;

Versatile metal mesh allows light, heat and air through, while retaining its strength forming a very strong barrier for security purposes.

Expanded metal lath  Expanded metal lath

[riblath12-blog]

High Ribbed Lath Has High Quality and Security for Rib Lath

High Rib Lath has excellent engineering quality and construction security

https://www.metalriblath.com/high_rib_lath.html

. It is widely used in construction reinforcement of tunnels bridges, valve basement systems, sewage systems, subways, retaining walls, nuclear power plants, shipyards, water pools and marine engineering works and high rise building projects and non-regular or bending pattern as concrete permanent assembly-free formwork lath.

High Rib Lath is produced from galvanized steel expanded metal sheets. It provides longitudinal 3/8" ribs and small inverted ribs, together with a small herringbone mesh offering superior strength and spanning capabilities.High Rib Lath

Specifications and sizes can be customized.

[riblath12-blog]

Rib Lath Features and Uses Compared with Other Metal Laths

Rib Lath Rib Lath is a versatile metal lath stiffened by the longitudinal ribs. It has V ribs and greater tensile strength offering excellent plaster base and reinforcement for all types of walls, ceilings and fireproofing of steel beam, and columns. Ribbed lath is ideal for providing a high degree key of mechanical bonding with plaster or render.

https://www.metalriblath.com/rib_lath.html

Rib Lath Features Compared with Other Metal Laths:

It is easy to cut and form to ornamental plaster work. It provides ample keying for scratch coat. It is commonly used for plaster machine application. It gives a uniform coat depth for large area. Ribbed lath is produced in hot dipped galvanized steel, zinc coated carbon steel or stainless steel.

Rib Lath  Rib Lath

Made of expanded metal, rib lath is ideal material used as a background for plaster, render, stucco application in construction of suspended ceilings partition.

Model

Thickness SW × LW

Rib height Rib distance Kg/m2 Width of piece RLAG305080 0.30 16 × 11 8 150 0.85 600 RLAG355080 0.35 16 × 11 8 150 1.00 600 RLAG405080 0.40 16 × 11 8 150 1.14 600 RLAG455080 0.45 16 × 11 8 150 1.28 600 RLAG505080 0.50 16 × 11 8 150 1.43 600