ruiyuanpress - Tumblr blog

ruiyuanpress · 3 years

Text

Regenerative Thermal Oxidizer (RTO)

https://www.ruiyuanpress.com/products/rto-regenerative-thermal-oxidizer/

Our Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy, Widely considered to be the most energy-efficient oxidizer. Its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself make the RTO so popular widely. The regenerative component makes it capable of fuel-free operation at very low VOC concentrations.

Benefits of the RTO Oxidizer

System pressure drop resulting in reduced electrical consumption

Multiple designs for easier and faster installation

Greater system flexibility and versatility

High reliability and long-life expectancy (15-20 years+)

Design Features of RTO Oxidizer

Pre-assembly, wiring, and testing as much as possible prior to shipment

Can handle process flows up to 25% Lower Explosive Limits (LEL) with self-sustaining LELs as low as 3%

The burner is sized for full flow, zero process VOC emissions so that the RTO can maintain temperature and VOC destruction efficiency over the entire range of process operation

Bake-out capabilities designed to remove organic particulate buildup

Hinged access doors for ease of maintenance

Variable Frequency Drives (VFDs) to support high volumetric turn-down during low-process and idle conditions

Compliance with FM Global and other international certifications

RTO Oxidizer Air Flow Range & Efficiency

Air Flow Range：3,000-70,000 SCFM (4,815-112,350 Nm3/hr) / Single Unit，70,000-500,000 SCFM (112,350-802,500 Nm3/hr) / Multiple Units

Concentration Range：0 – 25% LEL

Destruction & Removal Efficiency：99%+

#rto #oxidizer

0 notes

ruiyuanpress · 3 years

Text

Metal Printing and Coating Online Monitoring

https://www.ruiyuanpress.com/products/metal-printing-and-coating-online-monitoring/

The online monitoring technology is suitable for metal printing and coating production line, which greatly improves the yield and reduce metal sheets waste. Metal sheets are an expensive material and early detection of damaged coating and contaminated margin reduces ma-chine stops and waste cans in welding lines. The systems ensure short setup times and increase production efﬁciency – start the print run with 100 % defect-free material.

Speed Up Production with 100 % Pre-Press Coating Control

Remove damaged sheets before the decoration process starts

Automatic measurement of dimensions during setup and production

Prevent misregistration defects with in-line margin detection

Improved Efficiency in Metal Sheet Decoration

Reduced machine setup time

Early alarms prevent evolving defects

Eject waste sheets within configurable defect parameters

Restored job requirements enable fast machine-ready

Our Metal Printing and Coating Online Monitoring Strengths

100 % Quality Control Throughout Entire Metal Packaging Production.

Maximize Yield While Exceeding Customer Expectations.

100 % Quality Inspection Supports Faster ROI

#production #line #monitoring

0 notes

ruiyuanpress · 3 years

Text

Metal Heat Transfer Thermal Oxidation Device（TNV）

https://www.ruiyuanpress.com/products/metal-heat-transfer-thermal-oxidation-device-tnv-dfto/

Metal heat transfer thermal oxidation device（TNV） is used to purify industrial waste gases containing high concentrations of organic pollutants, The system is characterized by a very high utilization rate of heat in system. Combined with a downstream heat recovery system, the unit is inexpensive to operate and requires only a small amount of external fuel heating.

HOW DOES THE TNV TECHNOLOGY WORK

After a heat transfer, the exhaust gas is directly burned by the combustion machine, combined with the heat released by the oxidation and decomposition of the solvent itself, which makes the furnace reach 750~800℃, and stays for 1~2 seconds, and the final destruction efficiency can reach 99.8%.

TNV Air Flow Range & Efficiency

Applicable flow rates from 2,000 to 55,000 Nm³/h

Heat utilization of 76% within the system

Heat recovery systems for air, water, oil, steam, and for absorption chillers

Low maintenance

Long service life

Easy operation

TNV Design Features

Preheating device: The oxidizer needs to be heated to above 700 degrees to start the oxidation reaction. The system requires a large amount of heat. The use of a preheating heat exchanger, along with the heat from the high-temperature exhaust gas exiting the oxidizer, can significantly reduce fuel consumption.

Automatic temperature control: The temperature for carrying out the oxidation reaction can be set as required, and the output of the burner is automatically adjusted by PLC to maintain the temperature according to the temperature inside the oxidizer

#dfto

0 notes

ruiyuanpress · 3 years

Text

Metal Coater

https://www.ruiyuanpress.com/products/metal-coating-machine/

RUIYUAN has been a designer and manufacturer of metal printing and coating equipment for over 20 years, This machine features high precision, versatile applications, and extended long service life. This unit is available not only as a free-standing coating machine with an automatic feeder for interior and exterior coating but also as an inline coater with a printing press for varnishing

Types of Offset Printing Press Line Coating Machine for Sale

RYTB 452B Series Metal Coating Machine

RYTB 452B Series

This unit is available not only as a free-standing coating machine with an automatic feeder for interior and exterior coating but also as an inline coater with a printing press for varnishing.

UV Coating Machine

1. Aiming at high efficiency & environmental-friendly issue.

2. This project proposes a green and efficient coating solution for the increasingly severe environmental problems.

3. In 2018, the first UV coating machine has been successfully sold to leading joint ventures in the domestic metal packaging industry.

Coating in top quality

1. Accurate cross and longitudinal stenciling guarantees ultimate spot coating quality.

2. Double-scrapper structure dramatically raises cost-efficiency.

3. Rigid manufacturing along with high-quality material extends service life.

4. Compatible applications between conventional solvent and water-based lacquers and potentially demanding UV lacquer.

#metalizing #machine #price

0 notes

ruiyuanpress · 3 years

Text

Drying Oven

https://www.ruiyuanpress.com/products/heating-drying-oven-industrial/

As one of the professional industrial drying oven manufacturers, RUIYUAN continues technological innovation to create the best value for all customers and provides a suitable price for industrial drying ovens. RUIYUAN's conventional oven is mainly used to dry after the metal printing or coating. Fast and gentle heating stages and effective cooling have always been the benchmark for drying ovens. Reliable and damage-free drying are guaranteed even at high speeds. This efficiency can be enhanced with RUIYUAN's Conventional oven.

Drying Oven Specification

CONFIGURATIONS

27M

30M

33M

Maximum speed

6000 sheets/h

Minimum oven working temp

230℃

The length of oven

27m

30m

33m

The total length of equipment

42.95m

45.95m

48.95m

Time for sheets baking in baking zone

Speed of 4800 sheets/h

10minute

11minute

12minute

Speed of 5100 sheets/h

9.4minute

10.3minute

11.3minute

Speed of 5400 sheets/h

8.9minute

9.8minute

10.7minute

speed of 6000 sheets/h

8minute

8.8minute

9.6minute

Maximum sheet size

1143x965mm

Minimum sheet size

710x508mm

Sheet thickness standard

0.15-0.4m

Fuel

LPG

Cooling zone

4.66m

6.96m

Quantities of heating chamber

2

Cooling zone air intake volume

50000m³/h

Cooling zone air outlet volume

55000m³/h

Air supply: not exceed

4500m³/h

Front exhaust air volume

about 10000 m³/h

Rear exhaust air volume

about 4000 m³/h

Total power consumption

about 58.1 kw

about 64.1 kw

about 75.1kw

Drying Oven Technical Performance

Our industrial drying oven guarantees the printing products reliable and damage-free drying even at high speeds

Multi-layer structure wallboard for fewer energy consumptions is offered with extra thicker boards within 150mm-220mm, 2-layer for top and bottom plate, and 3-layer for oven body.

Wickets used in drying ovens are coated with chrome. (Three times are nickels processing and the last one is coated with chrome) and hollow structured to facilitate more stable transmission and heat absorption.

Wickets conveyor using high strength chain, the roller (our patented product) increased to 5 pcs/meter, it has high wear resistance and dust-free.

#convection #drying #oven

0 notes

ruiyuanpress · 3 years

Text

CTP Computer to Plate Printing Machine

https://www.ruiyuanpress.com/products/ctp-automatic-computer-to-plate-machine/

CTP (Computer To Plate) refers To Computer direct Plate making, which uses laser scanning To record digital page information on the Plate, and then obtains the Plate through appropriate post-processing. According to the different imaging principles, it can be divided into two types: UV-CTP and thermal CTP. UV-CTP is the use of light exposure to the printing plate to image, thermal CTP is the use of thermal imaging technology imaging.

A complete CTP system includes digital workflow, digital proofing, and CTP output equipment, etc. CTP output equipment includes plate feeders, direct plate makers, (over-bridge) plate processors, plate collectors, etc

CTP Computer to Plate Machine Main Features

Precise guide-rail base

Three chamber drum-in vacuum structure, a workable suction area big, plate small

High-precision side-ruler tech. Increase repeat precision

Continuous plate go-in structure, auto plate uploading

Power saving, reliable PLC system

High-precision optical platform

#ctp #for #sale

0 notes

ruiyuanpress · 3 years

Text

Stacker

https://www.ruiyuanpress.com/products/automatic-vac-stack/

To achieve non-stop production, one box is used for collecting unqualified products, the other two boxes receive the sheet change-over freely. After meeting the set collection quantities, it can land and output the sheet automatically, when receiving the pallet and rising automatically to prepare for receiving the next sheet without any operator set up. It's very intelligent and convenient.

Stacker Specifications

Stacker

Technical Data

Machine Dimensions(mm)

1680x1640x1550

Maximum speed (sheets/min)

100

Maximum Tinplate Width (mm)

1200

Main power

50HZ,3KW

Automatic VAC Stack Technical Performance

Achieve the classification of material collection, waste and finished materials collected in separate pallets.

Three stackers can be automatically switched; each group of stacker can be used as receivers.

Automatic discharge to save labor cost.

Free control without time limit for more flexible operation,save 15 minutes

#buy #stacker

0 notes

ruiyuanpress · 3 years

Text

Automatic Pile Turner Machine

https://www.ruiyuanpress.com/products/automatic-pile-turner-machine/

Our pile turners are mainly for metal printing and coating. The working platform is plate type or drum type, easy for loading and unloading stackers. They can handle metal sheets up to a maximum size of 1143(mm)×965(mm) and stack weights up to 3,600 kg, and suitable for all typical applications in the industry.

The machine adopts the synchronous screw pressing type with a double shaft motor, with a large pressing force. Its structure is reasonable, easy to operate, stable, and reliable performance, so as to guarantee maximum operating reliability and absolutely damage-free turning. This device can be installed outline and can serve up to 7 production lines.（It can also be used to make holes and connect wires）

Pile Turner Machine Technical Performance

Operational reliability and high efficiency

Damage-free turning

Possibility of integration inline or offline

#pile #turner

0 notes

ruiyuanpress · 3 years

Text

Metal Printing & Coating Machines And System Automation Solution

https://www.ruiyuanpress.com/products/

RUIYUAN has been a designer and manufacturer of metal printing and coating equipment for over 20 years. we committed to Manufacture Top World Class Products.

As a market and technology leader in China in the field of metal printing, metal coating, and oven equipment manufacturing, RUIYUAN provides total solutions

for metal printing, coating, and drying of metal sheets lines according to customers' needs and provides customized production services.

Metal Printing

As a global provider of metal printing presses, we are committed to creating plate printing presses with high-quality standards. We retain reasonable prices and efficient service to achieve a superior price/performance ratio.

Aluminum Printing

Tinplate Printing

RYYT 453 Series

RYYT 452 Series

Metal Coating Machine

Metal Coater

Our coating machines, suitable for every applications and run stably and reliably.This machine features in high precision, versatile applications and extended long service life.

RYTB 452B Series

UV Coating Machine

Drying Machine For Metal Printing

Drying

RUIYUAN drying system includes Drying oven and UV LED Curing System. They can be integrated directly into the metal printing or coating line. The system can greatly improve the printing speed while ensuring curing efficiency.

Drying Oven

UV Drying