sanyzoomlionputzmeister-blog

[sanyzoomlionputzmeister-blog]

Concrete Mixer Truck

#cementConcrete mixer pump truck is a special truck used to transport concrete used in construction, Because of its appearance, it is often called the field screw truck, olive truck. These trucks are equipped with cylindrical agitators to carry the mixed concrete. During the transportation, the stirring tube will always rotate to ensure that the concrete carried will not solidify. After delivering the concrete, water is usually used to wash the inside of the mixer to prevent residual concrete from hardening and taking up space, so that the mixing tube volume is less and less.

 The cement mixer lorry is composed of automobile chassis and special equipment for concrete mixing transportation. The chassis of the concrete mixing truck produced in our country mostly adopts the second kind universal chassis provided by the whole truck manufacturer. Its special mechanism mainly includes mixing drum, drive system, water service, full power force extractor, support for front and rear agitator tube, reducer, hydraulic transmission system, input and output materials system, control mechanism and cleaning system. It works by taking the power out of the chassis through a force extractor, and drive the hydraulic system variable pump, convert mechanical energy into hydraulic energy for transmission to the quantitative motor, the motor drives the reducer again, the concrete mixer truck is driven by a reducer, mix the concrete.

 The structure and characteristics of Teila products are summarized as follows:

 Firstly, All the concrete machines are goods in stock. Teila is a supplier as well as a factory, we have maintenance & remanufacture workshop and super remanufacture engineer team in Xiangtan, Hunan, China.

 Secondly, For the used concrete machine, engineers have a strict review mechanism for the supply and manipulate of the concrete machine, checking over 500 items and fill in the first inspection list. Equipment that meets to Teila evaluate standard can enter the factory to be maintained. We ensure there is zero failure in the machine before it leaves the factory. Our Equipment features low risk, small investment, and fruitful returns.

 Thirdly, For the refurbished(remanufactured) concrete equipment, we have superior and exquisite remanufacture technology. Our Maintenance and remanufacture technology is in a leading position of concrete machine industry. Teila Remanufacture team has added the industry-leading standard system of "one, two, three, four and five level". Strict maintenance and inspection in accordance to standardize procedures, Implement the system operation, standardize management, ensure customers are convenient to use.

 Fourthly, from purchase to shipping one-stop offerings and there is no worry from cost to after-sale service.

http://www.hnteila.com/concrete-mixer-truck/

[sanyzoomlionputzmeister-blog]

ZOOMLION CIFA/HINO700 Concrete Mixer Truck

Brand

Zoomlion/CIFA

Chassis Brand

Hino700

Model

Hino700

Released date

2010

Fob price(Appreciated with customer proposal and negotiation price)

USD25000

Drive mode

6*4

Cabin

GreyFS2844, 3seats

Engine

Model

Hino E13C WB

Emissionstandard

Euro5

Max output power(Kw/rpm)

321/1900

Max torque(N·m/rpm)

2059/1800

Transmission

Model

RTLO16918B 18 forward 4 reverse

Rear axle: ratio/loading capacity

V Rod Left Rear/21.8 tons

Clutch

Hino CR-380,Drytwin plate with damper springs

Braking system

Full air, dual circuit

Main Parameter

Overall dimension(mm)

9000*2500*3930

Mixer barrel volume

10m³

Wheelbase(mm)

4005+1350

GVW(Kg)

25000

Rated load (kg)

11870

Tire

11.00R20

http://www.hnteila.com/concrete-mixer-truck/zoomlion-cifa-hino700-concrete-mixer-truck.html

[sanyzoomlionputzmeister-blog]

Concrete Pump

Since Hunan Teila Heavy Industry Machinery Service Co., Ltd. was established, Teila is always committed to concrete pumps. Our main products include truck mounted pumps, trailer pumps, line pumps, mixer trucks and so on. The brands involved are well-known top brands both in domestic and overseas. Such as Sany, Zoomlion, Putzmeister and Schwing and so on. Each series contains new concrete pump, used concrete pump, refurbished concrete pump, and concrete pump spare parts. So Teila target customers are very focused and specific.

 The concrete pump is mainly used for the transportation of concrete in the construction of urban construction, residential area, sports venues, overpass, airport, railway, etc. As long as there is demand for these mentioned four categories of products, Teila can satisfy the needs of customers from any dimension. From maintenance cost, quality standard, service efficiency integrated into a complete value chain based on customer requirements.

 The structure and characteristics of Teila concrete pumps are summarized as follows:

Firstly, all new concrete pumps are in stock. Teila is a factory, having maintenance &  refurbishing workshops, and excellent engineering team in Xiangtan, Hunan, China.

 Secondly, for used concrete pumps, engineers have a strict review mechanism for the source and control of the equipment, checking over 500 items and fill in the first inspection list. Equipment that meets to Teila review standard can enter the factory area for maintenance. Teila used concrete pumps have the characteristics of low risk, small investment, and high returns. Zero failure before leaving the factory!

 Thirdly, for refurbished concrete pumps, Teila has advanced and exquisite maintenance and refurbishing technology which leads the industry. Teila refurbishing has introduced the industry-leading standard system of "one, two, three, four and five level". Strict maintenance and inspection according to standard procedures, implement the process operation, standardize management, customers are assured to purchase and use it conveniently.

 Fourthly, from purchase to delivery one-stop services and there is no worry from cost to after-sale service.

http://www.hnteila.com/concrete-pump/

[sanyzoomlionputzmeister-blog]

Concrete Trailer Pump

With the rise of modern industry, the construction method of concrete as the main material has become one of the main constructions in the construction industry, It takes up a large proportion in all kinds of engineering construction, this makes the development of concrete machinery durable, and there is a growing situation. Trailer mounted concrete pump, referred to as "trailer pumps", it is one of the various concrete machines, used for conveying and pouring in concrete construction.

 Generally, a concrete delivery pump has the following main technical parameters: delivery capacity, outlet pressure, power, and distribution valve form. In terms of power type, pump trailer is generally divided into diesel trailer pumps and motor trailer pumps. In terms of hopper allocation, trailer pumps are generally divided into S valve, Ram valve, C valve.

 Classification selection 37kW (domestic minimum standard concrete pump, under 37kW is fine stone mortar pump), 45kW, 55kW, 75kW, 90kW, 110kW, 130kW (diesel), 132 kW, 162kW (diesel), 174kW (diesel)......

 Trailer pump is manufactured by electric, diesel and ultra-high pressure for your use on sites. The trailer Mounted Pumps prove their worth and superior performance in various applications, e.g. operate well at -22°C in Moscow, 55°C in Dubai, 12h continuous pumping and pump of difficult concrete like B90, C150, and 3-gradation concrete. 5 core pump technologies provide you with the best trailer pump. Trailer pump has high pumping efficiency, long service life, simple operation, efficient energy saving, cutting-edge technology, trustworthy!

http://www.hnteila.com/concrete-pump/concrete-trailer-pump/

[sanyzoomlionputzmeister-blog]

Putzmeister 42M Concrete Boom Pump

Our own number: 723

1. Re-manufactured Putzmeister 42 meters concrete pump, Volvo chassis, 4RZ boom form with x-leg. First-level standard maintenance. High working stability.

2. Approximate to New putzmeister used pumps standard.

 Safety issues should be paid attention to in the construction of putzmeister used putzmeister pump

Keep the water tank full of clean water, and check and deal with it in time when finding the water quality is cloudy and there are many sand grains.

Bolts of the putzmeister 42m shall be fastened, pipe joints shall be tightly sealed, and protective devices shall be complete and reliable.

The control, high-speed handle, handwheel, control lever and cock shall be in the correct position. The hydraulic system should be normal and free of leakage.

When the pumping system is under pressure, it shall not open any delivery pipe or hydraulic pipe. The safety valve of the hydraulic system shall not be adjusted arbitrarily, and the accumulator can only be filled with nitrogen.

After the operation of concrete tow pumps, all the commercial concrete in the hopper and pipeline must be exported, and then the putzmeister concrete pump truck, hopper and pipes shall be cleaned. When rinsing the pipe with compressed air, no one can stand within 10 meters in front of the outlet end of the pipe, and the foam rubber and sand particles rushed out should be collected by metal net basket.

It is strictly forbidden to flush the pipe of the placing boom with compressed air. The folding and shrinking of the placing boom should be done in order.

http://www.hnteila.com/concrete-pump/putzmeister-42m-concrete-boom-pump.html

[sanyzoomlionputzmeister-blog]

Putzmeister Concrete Boom Pump 736

1. Putzmeister 42 meters concrete pump, Volvo chassis, 4 axle x-leg, classical 4 booms, high working stability.

2. Manufacture Date is November of the year 2005.

3. Maintenance completed new tires of the complete machine. Hopper maintenance; Finishing lubrication pipeline, circuit, and hydraulic circuit. Whole line arrangement, old pipe and line changed, pressure debugging for 8 hrs and in very excellent condition.

4. Import quality, trustworthy. No formalities and higher cost performance.

5. The first class of machine and make sure each of everything is in good condition, must zero fault when leaving the factory, reduce working pressure and cost from clients.

 Only with the stable lower plate is the pump truck safe. The arm-frame pump truck supporting leg should be paid much attention.

 Just like kung fu, if your "lower plate" is not strong enough, you can easily be pushed down. Whether Putzmeister second hand pump trucks' legs can firmly "plunge" on the ground, is the priority of the safe operation of the arm gantry pump truck.

 1. Protect yourself and others from dangerous areas

When opening or closing the leg of the gantry Putzmeister stationary concrete pump, the rotation range is a dangerous area. People may be hurt in the range. When carrying out this operation, you should be careful of yourself and the people nearby.

 2. To strengthen of the overlapping location is great. The supporting legs should be extended in place.

The legs of the arm pump truck all have fixed strengthening positions. Only when the legs are opened and extended in place can these strengthening positions give full play to the strength. Otherwise, the supporting legs will be in danger of breaking. Pay attention to the arrows on the legs and ears as you extend them.

 3. Communicate with construction personnel in advance and don't "step on empty"

The gantry pump truck must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area. In addition, communicate with the person familiar with the construction site before supporting the leg, and make sure the leg is not above the sewer.

 4. Keep a safe distance to prevent ground collapse

Adequate safety distance should be set aside to prevent ground collapse when support is near a pit or ramp.

 5. The arm pump truck must be leveled and must not exceed 3 degrees

After the support is completed, make sure that the maximum horizontal deflection of the gantry Putzmeister truck mounted concrete pump is no more than 3 degrees. Generally speaking, the direction of the extension of the arm frame will be raised higher during the construction process, leaving a surplus for the subsidence after the extension of the arm frame. Currently, the arm mounted pump truck is usually equipped with an electronic level and alarm device. Once the arm mounted pump truck tilts too high, the alarm will sound to remind the operator. Before extending the armrest, make sure the legs are properly attached.

 6. Remote control ensures the safety. Do not be too high from the ground

Upon confirmation of all the leg under the condition of reliable and efficient, make confirmation on the leg safety with the first and second boom. The specific approach is to stretch one arm frame, making the open Angle at 90 degrees. Then let two booms in one meter off the ground. Move one arm up and down in the position of four legs, check whether the corresponding arm bracket and diagonal arm bracket are safe.

 7. If water enters under the leg, the arm shall be returned for safety

In case of the occurrence of rain water, oil cylinder leakage of supporting legs and factors reducing the stability of supporting legs, the arm shelf should be closed immediately. After the problem is eliminated, the supporting legs should be put up again according to the requirements.

 In addition, when supporting the arm pump truck, it is better to keep the tire off the ground by 5 cm or so. Otherwise, the swing of the s swing tube of the arm pump vehicle and the shaking of the vehicle caused by the impact of pressure in the tube will damage the vehicle driving mechanism.

http://www.hnteila.com/concrete-pump/putzmeister-concrete-boom-pump-736.html

[sanyzoomlionputzmeister-blog]

Refurbished Concrete Boom Pump

Advanced and exquisite maintenance and remanufacture technology. Maintenance and remanufacture technology leads the industry. Teila Remanufacture has introduced the industry-leading standard system of "one, two, three, four and five level", strictly in accordance with standard procedures for maintenance and inspection, implementing the process operation, standardizing the management, to ensure customers feel comfortable to purchase and use. What is re-manufacturing? Re-manufacturing is guided by the product life cycle theory, and in order to achieve the goal of improving the performance of waste products, in accordance with the principles of high quality and high efficient, energy and material saving, environmental protection, by means of advanced technology and industrialization production, we take parts of the refurbished pumps (remanufactured) and then repair it , and a series of technical measures of transformation of waste products or the floorboard of the engineering activities. Construction equipment re-manufacturing is not a simple repair, we can think the re-manufacturing as the highest stage of the repairing. The common repair is where it breaks, we fix it. But the re-manufacturing is a serial activity of repairing with the high technology and industrialized production. Frankly speaking, Teila dismantles the pump and then according to the standard of re-manufacturing, repairs, assembles and debugs it.

 What is refurbishing? Refurbishing is guided by the product whole life cycle theory, and in order to realize the waste product performance improvement as the goal, with the rule of high quality and high efficient ,energy and material saving, environmental protection, by means of advanced technology and industrialization production, we take parts of the equipment and then repair it , and a series of technical measures of transformation of waste products or the floorboard of the engineering activities. Concrete pump refurbishing is not a simple repair, we can think the refurbishing as the highest stage of the repairing. The common repair is where is broken, repair it. But the refurbishing is a serial activity of repairing with the high technology and industrialized production. Teila dismantles the refurbished concrete pumps and then repair, assemble and debug it according to the standard of refurbishing.

http://www.hnteila.com/concrete-pump/refurbished-concrete-boom-pump/

[sanyzoomlionputzmeister-blog]

SANY 48m Concrete Boom Pump

Our own number: 535

1. Re-manufactured Sany 45 meters concrete pump, Isuzu chassis, 4RZ boom ground jack is leg lifting. First-level standard maintenance. High working stability.

2. 20 hours pressurized with water and debugging, exempted from inspection in perfect condition. New tires, new paint, overall maintenance for engine and hopper, just change nozzle, glasses plates, cutting ring, piston replacement. debugging and rectification to good condition.

3. Sany Quality+ Sin Hanyo Re- manufacture It's more reliable than buying a second line brand new Sany pump concrete.

 The glass plate is an important part of the sany concrete pump manual. Although its volume is small, its technical content and processing cost are very high. At present, glass plate can serve for about 30,000 cubic meters of commercial concrete pumping. In order to improve the service efficiency of the arm gantry pump truck, it is very important to take corresponding measures to improve its service life.

 Working characteristics of glasses plate

The eyeglass plate is a part of the S-shaped Sany truck mounted concrete pump distribution valve, connecting to the commodity concrete conveying cylinder. Driven by the swinging oil cylinder, the moving part S pipe swings from one commodity concrete cylinder to the other commodity concrete cylinder. The cutting ring vibrates with the S-tube attached to the eyeglass plate. The quick swing of the cutting ring causes intense wear between the eyeglass plate and the pre-mixed concrete. It also bears the impact of cutting off the stones. It can be seen that the eyeglass plate mainly works at room temperature and bears the impact force, shear force and very strong friction.

 The main failure modes of eyeglass plate are wear and fracture failure. The wear between the eyeglass plate and cutting ring is abrasive wear. First, the cutting ring and the hole Angle of the eyeglass plate are blunt, and a smaller circular surface wedge-shaped trace is formed. The wear gap increases with the increase of abrasive particle size. When the gap is large to a certain value, the construction will be affected by severe leakage of the slurry. With the increase of pump height, the impact shear of the eyeglass plate will increase, the wear will be more intense, and it is prone to fracture and collapse.

 It can be concluded from the above analysis that the surface of the eyeglass plate should not only have high hardness and wear resistance but also have the certain toughness and high fracture resistance.

http://www.hnteila.com/concrete-pump/sany-48m-concrete-boom-pump.html

[sanyzoomlionputzmeister-blog]

Used Sany 46 Meters Concrete Boom Pump

Our own number: 557

Sany 46 meters concrete pump, Isuzu chassis, RZ type, classical 5 booms, high working stability.

Manufacture Date is April of the year 2011 and pumping Volume is 124400cmb and Mileage is 35100km.

Comprehensive maintenance, direct to the construction site.

 Overview of equipment:

Five-section RZ arm frame, the fabric is flexible.

X-shape outrigger, single side support, suitable for narrow site construction.

The fabric height of the three-axis chassis reaches 46 meters, and the chassis boom is configured with the best specifications.

Computer energy saving control, automatic power matching, the average energy saving is 20%.

The pump system is flexible to install, reducing the impact on the base frame and the wear of the concrete piston. reduce the impact on the base frame and the wear of the concrete piston.

The new control system is free to upgrade automatically.

The fault self-diagnosis system can automatically diagnose 150 faults and troubleshoot efficiently.

Intelligent boom system is easy to control, and can automatically pour for boom vertically or horizontally.

 Safety precautions of Used Sany 46 Meters Concrete Pump

1. The supporting ground must be horizontal. Otherwise it is necessary to make a horizontal supporting surface.

2. the Sany concrete pump truck must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area.

3. When the Sany pump truck is supported near the pit or slope, sufficient safety spacing should be reserved.

4. When supporting, the whole machine should keep horizontal. The maximum horizontal Angle before and after the whole machine should not exceed 3 degrees.

5. When the legs are expanded or folded, the area in which they rotate is the danger zone. Individuals within the scope may be hurt.

6. When supporting, all legs must be extended to the specified position. (The supporting leg is aligned with the upper arrow on the ear, and the front supporting arm is aligned with the extension arm arrow on the front supporting leg) Otherwise there may be a danger of tilting.

7. The cantilever can be operated only when the supporting leg has been set up. The cantilever must be placed on the main support before the leg can be folded.

8. The cantilever must be closed immediately after a decrease in stability is detected. After removing disadvantageous factor, place them according to requirement afresh. The factors including rain, snow, and so on.

http://www.hnteila.com/concrete-pump/used-sany-46-meters-concrete-boom-pump.html

[sanyzoomlionputzmeister-blog]

Zoomlion 52 Meters Concrete Boom Pump 2013

Zoomlion 52 meters concrete pump, Isuzu chassis.

Manufacture Date is September of the year 2013.

Used condition and normal working. Equipment evaluation and Restorative maintenance.

Intelligent security, derived from Europe's mature bionic 6RZ boom system. The first configuration comes from the CIFA k-tronic intelligent security cloth technology pump. The key parts are the original components of international first-class brands, and the most rigorous and rigorous production process and testing process are adopted to ensure the high quality of each Zoomlion concrete pump china.

 Matters needing attention in the selection of concrete pump truck

The volume of the construction business

The quantity of used boom pumps can be calculated according to the quantity of commodity concrete pouring, the actual quantity of conveyance of the single machine and the time of construction. For those commercial concrete pumping construction projects with a large amount of one-time concrete, it is advisable to have a certain amount of reserve in addition to being determined according to the calculation. In addition, the commercial concrete business concrete station with the annual output of 10~ 150 thousand m3 shall be equipped with 2~3 commodity concrete gantry pump trucks.

 Product configuration

In the selection of product performance of concrete arm used pump trucks, the high starting point should be adhered to. If high-value concrete upper arm pump truck is selected, the standard of its products must be improved. The quality of the main components of the product, both internal quality and external quality, should be adapted to the high value of the whole vehicle.

 Power system

Concrete frame pump truck adopts the full hydraulic technology. So it is necessary to consider whether the hydraulic technology used is advanced or not, and how the quality of hydraulic components. Because its power comes from the engine, so besides engine performance and quality, the performance of automobile chassis, bearing capacity and quality should also be considered.

 The operating system

The operation control system of commodity concrete arm pump is provided with manual, wired and wireless control modes. Wired control is convenient and flexible, wireless remote control can be operated remotely. Once the circuit fails, the manual operation mode can be adopted.

 After-sales service

As a special vehicle, the concrete arm pump truck should be required for its safety, mechanical performance, after-sale service, and parts supply. Otherwise, once the accident occurs, it not only affects the construction schedule but also will produce the unimaginable consequence.

http://www.hnteila.com/concrete-pump/zoomlion-52-meters-concrete-boom-pump-2013.html

[sanyzoomlionputzmeister-blog]

Zoomlion 56m Concrete Boom Pump

Product Description of Zoomlion 56m Concrete Pump

ZLJ5440THBK 56X-6RZ

• Compact in design, the 56m pump mounted on the 4-axle truck, total weight is within the limit of the truckload.

• Efficient pump unit: consist of 2 Rexroth 180 main pumps, which generates 90 bar pressure on concrete with the smooth flow of 180m3/h.

• Agile placing boom with 6 arms gives a wide work range.

• The controller is designed for heavy-duty use, with a monitor, it monitors the concrete pumping equipment intelligently on working data management, real-time diagnostics, alarm logging, and service interval notice.

• Rich in configurations and high-quality components.

 Concrete zoomlion pump is a kind of concrete transportation tool that is commonly used in many construction units. It can greatly improve the efficiency of the project and shorten the construction period of the project. However, during the construction process, not many people understand the rules of operation of concrete pumps very well. Feeding is a very important part of it, and it should not be ignored.

 So how do you feed the concrete pump?

In the pumping process of the concrete pump, in order to ensure the smooth progress of the pumping, it must be carried out according to the factory operating instructions. As an important process in the construction, feeding is along with the entire pumping process of the project. How should the concrete pump be fed in the pumping? Specifically, the following rules can be followed:

 In order to ensure the smooth progress of the project, usually in the process of pumping concrete, the concrete pump hopper should be provided with a separate screen, so as to avoid clogging at the inlet and outlet. At the same time, special personnel should be set to monitor the feeding during the whole feeding process, which can directly avoid the blockage caused by the excessively large aggregate or foreign matter entering.

http://www.hnteila.com/concrete-pump/zoomlion-56m-concrete-boom-pump.html

[sanyzoomlionputzmeister-blog]

Zoomlion Concrete Mixer Truck-S.N.H180213

Product Description of used cement concrete mixer truck-S.N.H180213:

1. Zoomlion large 10 cbm used cement mixer truck.

2. Shanxi Automobile Delong chassis F3000.

3. Three axles, weichai power, WD615/WD618 series engines were introduced from Austria Steyr company with mature technology.

4. 336 horsepower.

5. Manufacture Date is Feb. of the year 2011.

6. Remanufactured equipment in the best condition.

7. Import quality, trustworthy. No formalities and higher cost performance.

http://www.hnteila.com/concrete-mixer-truck/zoomlion-concrete-mixer-truck-s-n-h180213.html

[sanyzoomlionputzmeister-blog]

ZOOMLION CIFA/HINO700 Concrete Mixer Truck

Brand

Zoomlion/CIFA

Chassis Brand

Hino700

Model

Hino700

Released date

2010

Fob price(Appreciated with customer proposal and negotiation price)

USD25000

Drive mode

6*4

Cabin

GreyFS2844, 3seats

Engine

Model

Hino E13C WB

Emissionstandard

Euro5

Max output power(Kw/rpm)

321/1900

Max torque(N·m/rpm)

2059/1800

Transmission

Model

RTLO16918B 18 forward 4 reverse

Rear axle: ratio/loading capacity

V Rod Left Rear/21.8 tons

Clutch

Hino CR-380,Drytwin plate with damper springs

Braking system

Full air, dual circuit

Main Parameter

Overall dimension(mm)

9000*2500*3930

Mixer barrel volume

10m³

Wheelbase(mm)

4005+1350

GVW(Kg)

25000

Rated load (kg)

11870

Tire

11.00R20

http://www.hnteila.com/concrete-mixer-truck/zoomlion-cifa-hino700-concrete-mixer-truck.html

[sanyzoomlionputzmeister-blog]

Used Putzmeister Concrete Boom Pump 738

Product description of Used Putzmeister Concrete Pump 738:

1. Putzmeister 36 meter concrete pump, UD chassis (belongs to Nissan, 3 axle x-leg, 4 booms, high working stability.

2. The manufacture Date is August of the year 2007.

3. Working condition and regular work. Equipment evaluation and maintenance.

4. Remanufacturing will be carried out to ensure that every product is in good condition and that there must be no faults to the product when leaving the factory so as to reduce the working pressure and cost of customers.

A used Putzmeister concrete boom pump is a machine which uses the pressure to transfer the concrete continuously along the pipeline. It is composed of pump body and conveying pipe. According to the structure form, it is divided into piston type, squeeze type and hydraulic diaphragm type. The pump body is mounted on the chassis. Equipped with retractable or folded placing booms, the pump truck is constituted.

 The used Putzmeister pumps are modified on the chassis of the truck. It is installed on the chassis with power transmission device, pumping and mixing device, placing the device and other auxiliary devices. The power of the engine is transferred to the hydraulic pump unit or rear axle through the power box, and the hydraulic pump pushes the piston to drive the concrete pump. Then, the concrete can be transported to a certain height and distance by placing booms and pipe.

http://www.hnteila.com/concrete-pump/used-putzmeister-concrete-boom-pump-738.html

[sanyzoomlionputzmeister-blog]

Refurbished Concrete Boom Pump

Advanced and exquisite maintenance and remanufacture technology. Maintenance and remanufacture technology leads the industry. Teila Remanufacture has introduced the industry-leading standard system of "one, two, three, four and five level", strictly in accordance with standard procedures for maintenance and inspection, implementing the process operation, standardizing the management, to ensure customers feel comfortable to purchase and use. What is re-manufacturing? Re-manufacturing is guided by the product life cycle theory, and in order to achieve the goal of improving the performance of waste products, in accordance with the principles of high quality and high efficient, energy and material saving, environmental protection, by means of advanced technology and industrialization production, we take parts of the refurbished pumps (remanufactured) and then repair it , and a series of technical measures of transformation of waste products or the floorboard of the engineering activities. Construction equipment re-manufacturing is not a simple repair, we can think the re-manufacturing as the highest stage of the repairing. The common repair is where it breaks, we fix it. But the re-manufacturing is a serial activity of repairing with the high technology and industrialized production. Frankly speaking, Teila dismantles the pump and then according to the standard of re-manufacturing, repairs, assembles and debugs it.

http://www.hnteila.com/concrete-pump/refurbished-concrete-boom-pump/

[sanyzoomlionputzmeister-blog]

Concrete Mixer Truck

Concrete mixer pump truck is a special truck used to transport concrete used in construction, Because of its appearance, it is often called the field screw truck, olive truck. These trucks are equipped with cylindrical agitators to carry the mixed concrete. During the transportation, the stirring tube will always rotate to ensure that the concrete carried will not solidify. After delivering the concrete, water is usually used to wash the inside of the mixer to prevent residual concrete from hardening and taking up space, so that the mixing tube volume is less and less.

The cement mixer lorry is composed of automobile chassis and special equipment for concrete mixing transportation. The chassis of the concrete mixing truck produced in our country mostly adopts the second kind universal chassis provided by the whole truck manufacturer. Its special mechanism mainly includes mixing drum, drive system, water service, full power force extractor, support for front and rear agitator tube, reducer, hydraulic transmission system, input and output materials system, control mechanism and cleaning system. It works by taking the power out of the chassis through a force extractor, and drive the hydraulic system variable pump, convert mechanical energy into hydraulic energy for transmission to the quantitative motor, the motor drives the reducer again, the concrete mixer truck is driven by a reducer, mix the concrete.

http://www.hnteila.com/concrete-mixer-truck/

[sanyzoomlionputzmeister-blog]

6 Section Boom Concrete Pump Truck

Define of 6 Section Boom Concrete Pump Truck

The six section pump truck, as the name implies, is a product type of the pump truck. With the help of six steel arms, it creatively USES bionics technology to integrate the mechanism of human hand movement and insect foot movement into the design of concrete pump truck pump frame. It combines finite element, dynamic simulation and other advanced design methods.

 Advantage of 6 Section Boom Concrete Pump Truck

The six section technology greatly improves the utilization rate and flexibility of the arms frame. Compared with the five section boom, under the same length, the effective placing height is increased by 15%, and the effective placing range is increased by 20%. Meanwhile, based on the bionics design, the initial boom is long and end boom is short. The opening space is smaller, and the booms frame is more flexible. For example: At the same height of 50M, the real casting height of six section boom is more than 4M higher than that of five section boom. the 50M six booms =54M five booms. The pump truck has a higher cost performance.

http://www.hnteila.com/by-quantity-of-boom-sections/6-section-boom-concrete-pump-truck.html