shumon-me-blog - Tumblr blog

shumon-me-blog · 5 years ago

Text

Blum Servo Drive

Introduction

The concept of the servomechanism is much older than the use of the current terms. The Greeks used wind-driven servo motors to continuously adjust their windmills' heading, so the blades always face into the wind. The history of these systems is difficult to trace as the terms governor regulators, and follow-up device proceeded with the use of servo motor and servo drive. The industrial revolution marked a significant turning point in human social history.

The development of windmills, boiler, furnaces, and the steam engine that could not be regulated by an operator required automatic control. Servo motor is a closed-loop servomechanism that uses position feedback to control its motion and final position.

The input to its control is a signal representing the position commanded for the output shaft. Servo systems consist of four main components such as

· Motor

· Drive

· Controller

· Feedback device

The controller determines with the motor must do and then triggers the drive to send the necessary electrical energy to the engine to make the required move happen.

The servo drives are also sometimes called amplifiers due to they take control signals from the controller and amplify it to deliver a specific amount of voltage and current to the motor. Blum servo drive is the electric motion support system for base cabinets that can be combined with a large box and tandem box.

Types of Servo motor

There are different types of servo motors based on their applications. The most important amongst them like

· AC Servo motor

· DC Servo motor

· Brushless DC Servo motor

· Positional rotation servo motor

· Continuous rotation servo motor

Servo motor works on the Pulse Width Modulation (PWM) principle. This means its angle of rotation is controlled by the duration of the pulse applied to its control PIN. Servo motor is formed up of DC motor controlled by a variable resistor and some gears.

Servo motor is a closed-loop servomechanism that uses position feedback to control its motion and final position. Moreover, the input to its control is a signal representing the position commanded for the output shaft.

Siemens Servo Drive system

Siemens has offered a new and innovative Siemens servo drive system. The converters come with integrated safety functions and enable rapid engineering via motion technology objects in schematic S7-1500 controllers.

They are connected to higher-level controllers via Profinet and are easily and quickly programmed by automatic motor parameterization and one-button tuning. The Siemens is commission using an integrated web server one button tuning functionally allows automatic optimization of control parameters. Blum servo drive is an electrical power opening support system for drawers and pull-outs.

They are taking into consideration the behavior of the connected mechanics by different dynamic levels. Integrated safety functions include STO (Safe Torque off) and SS1. Both can be activated using STO, additionally using a terminal.

Additional functions are currently in the preparation stage Simatic 1KF2 motors are connected to the converters using a one-cable connection, including the power conductors, encoder, signal, and brake.

Panasonic servo drives control

There is more number of servo drive the famous brand in the world. Panasonic servo drives control the motors, which move parts from one place to another or machine parts to get the final product with its wired range. It is ideal for high dynamic small and complex applications and mobile applications with DC motors. The most significant advantage of the Panasonic servo drives such as

· High output power relative to motor size and weight

· The encoder determines accuracy and resolution

· Higher efficiency

· High torque to inertia ratio

A standard servo drive is used to control an angular motion between 0 and 180 degrees. A standard servo is mechanically incapable of turning any farther due to a mechanical stop built on to the main output gear.

Mitsubishi Servo Drive

Mitsubishi is the reputed worldwide brand, Mitsubishi servo drive system is advanced and flexible. This brand has a variety kind of motors to achieve the best machine performance.

Mitsubishi servo controls the motors which move parts from one place to another or machine parts to get the final product with its wired range. Generally, all of the brands of servo drive has digital, and analog system, so digital servo is much better than an analog servo.

Because when the servo has ramped up to full speed and torque, the slower space digital servo, in this case, will still provide much more speed and torque where it is needed more.

There are no issues with mixing analog and digital servos in a plane. It is usual for the digital servo to buzz in the center position. The digital servo will draw more current than analog servos, which will drain batteries faster.

Applications of Servo Drive

Many applications of servo drive the servo motor is small and severe but efficient in some applications like precise position control. A pulse width modulator signal controls this motor. The utilization of servo motors mainly involves in industries, manufacturing companies. Without that, it is included in computers, toys, robotics, and CD/DVD players. Blum servo drive has created new levels of motion quality with silent and effortless opening and closing actions.

DC servo motors are typically used as prime movers in a computer, numerically controlled machinery, or other applications where starts and stops are made quickly and accurately.

Servo motor has lightweight, low inertia armature that responds quickly to excitation voltage changes. Servo motors provide precise motion control for milling machine, grinding, lathes, centering, bending, and pressing metal fabrication for such items as jar lids to automotive wheels.

Conclusion

Servo motors are very useful in the world of robotics. They allow us torque and precise movements the ease of control via makes them all the more desire able to use in the project.

Servo motors come in two basic types AC and DC. Each model is designed for a different range of applications, but both can be found in various industrial and domestic machinery and devices.

The servo will not hold their position forever. The position pulse must be repeated to instruct the servo to stay in place. When vibration is sent to a servo that is less than 1.5ms, the servo rotates to a position and holds its output shaft some degree counterclockwise from the neutral point.

Bangladesh Automation Technologies is working on setting up Blum servo drive in industries, manufacturing factories, robotics, and home automation.

Servo motors have their characteristics like motors, which are voltage, current, operating speed, control pulse, torque, pulse, resolution, and weight. Servo motor is essential for every industry, and manufacturing company, and others.

0 notes