sinppa3 - Tumblr blog

[sinppa3]

What To Pay Attention To When Inflating Tires

Before inflation, pay attention to whether the matching between the tire valve and the valve core is smooth, and whether the valve is clean. When inflating, try not to loosen or take out the valve core to prevent the valve screw from falling off and leaking.

    Before inflation, it is necessary to pay attention to whether the air source is kept pure. The gas filled into the tire must ensure that it does not contain moisture, oil, or impurities, so as to avoid the deterioration of the rubber inside the tire and cause damage.

[sinppa3]

Sinppa Air Tools

Ningbo Sinppa Air Tools Factory focuses on various air tools, hand tools and electronic tools

[sinppa3]

What Is The Role Of The Air Filter Regulator In The Air Compressor?

[sinppa3]

Some Knowledge About Check Valve In Valve

The check valve refers to a valve whose opening and closing part is a circular disc and acts by its own weight and medium pressure to block the backflow of the medium. It is an automatic valve, also known as a check valve, a one-way valve, a return valve, or an isolation valve. The movement mode of the valve disc is divided into lift type and swing type. The lift check valve is similar in structure to the globe valve, except that it lacks the valve stem that drives the valve disc. The medium flows in from the inlet end (lower side) and flows out from the outlet end (upper side). When the inlet pressure is greater than the sum of the weight of the disc and its flow resistance, the valve is opened. Conversely, the valve is closed when the medium flows back. The swing check valve has a disc that is inclined and can rotate around the axis, and the working principle is similar to that of the lift check valve.

[sinppa3]

Two Structures Of Hydraulic Quick Connector

 The hydraulic quick coupler is a connector in which the material of the female connector is chrome-plated steel, and the locking sleeve of the male connector and the female connector is hardened. Hydraulic quick connectors are designed for special heavy loads. The material of the female connector is chrome-plated steel. The lock sleeves of the male connector and the female connector are hardened, with good pressure resistance and fatigue resistance. lock function.

    This kind of joint is a joint that does not require the use of tools and can realize the rapid assembly and disassembly of the pipeline. It has two structures: open and closed with both ends and open at both ends.

[sinppa3]

tire chuck can ensure that your tires remain inflated and improve fuel economy, allowing you to drive more safely on the road, and make your tires have a longer service life.

[sinppa3]

Disassembly And Replacement Of Tires Pay Attention To These Things

Tire damage is a worrying thing in life. If you want to remove the heavy tire from the wheel, you need a tool. Repair tools such as tire wrenches, small hooks, and jacks are needed to remove car tires. After having these, you should also master some disassembly skills for tires in different states.

[sinppa3]

  The clamping force of the pneumatic chuck is small, and the clamping force of the spring chuck is adjustable. If there is a serious jump after clamping the workpiece, what can we do?

    1) Check the full runout of the taper hole of the spindle. Generally, the radial runout of the new machine tool is about 5um.

    2) Install a spring jacket, clamp a standard sample rod, and check the runout at 3 times the diameter. The accuracy requirements depend on the workpiece accuracy requirements and the accuracy of the collet.

    There are many kinds of precision grades for the spring jacket, the main difference is the radial runout at 3 times the diameter, there are 3um, 5um, 10um, etc., which can be selected according to needs.

[sinppa3]

Working Condition Of Electrostatic Air Filter

The electrostatic air filter is generally composed of two stages. When the air passes through the first stage of the filter section, the particles in the air are charged under the action of circulating ions between the main plate and the ground electrode; then the collection section, where the charged particles are Filter segments are captured. When the gas-containing dust particles pass through the high-voltage electric field formed between the cathode line connected to the high-voltage DC power supply and the grounded anode plate, the gas is ionized due to corona discharge at the cathode. At this time, the negatively charged gas ions, Under the action of the electric field force, the plate moves toward the sun, and when it collides with the dust particles during the movement, the dust particles are negatively charged, and the charged dust particles also move to the anode under the action of the electric field force. The electrons are released, the dust particles are deposited on the anode plate, and the purified gas is discharged out of the dust filter.

[sinppa3]

Air hoses are widely used in air compressors, and good-quality air hoses can help air compressors and air tools work more efficiently. On the other hand, poor-quality air hoses can adversely affect the entire air delivery system. It may not be able to handle the air pressure in the air to transfer enough air to the right place.

[sinppa3]

About Industrial Air Duster Guns

HVLP duster guns use high flow, low pressure to spray at the air cap, a method that delivers high paint transfer efficiency. HVLP technology is a very common spray method in North America. The LVMP duster gun, on the other hand, combines traditional air with a spray technique of HVLP, using low-flow, medium-pressure compressed air outside the air cap to atomize the paint. Compared with ordinary air spray guns and HVLP spray guns, LVMP spray guns have a better atomization effect and higher transfer efficiency, and less air consumption.