sxul-teki-blog

[sxul-teki-blog]

D-link router wireless status

[sxul-teki-blog]

How to log in to 192.168.0.1

192.168.0.1 is pre-specified from the router firms as the default gateway address and can be used to create various changes to the router settings.

How to Login into 192.168.0.1?

To login into 192.168.0.1 follow these steps --

Open a web browser and go to http://192.168.0.1 or type 192.168.0.1 into the browser's URL bar.

Enter the username and password in the designated areas.

You will now be logged in into the Admin Panel of the router.

Notice: If you cannot access the router admin panel at 192.168.0.1, try using another IP address -- 192.168.1.1 or even 10.0.0.1.

If you've forgotten that the IP Address Username and Password or even if they are not working then you can --

Consider the manual/box or back of router. (or assess default username and password listing ).

If you changed the password and also have lost it or forgotten it then you want to do a factory reset. To do that, look for a tiny hidden RESET button on the rear of your router. Press and hold that button for about 10-15 seconds with a paper clip or a needle. The router will reboot itself and will return to default settings.

How to Change Route IP Address?

The default gateway IP address comes pre-assigned by your internet service provider, however, a user can configure it level to demands. It's frequently shifted to stop bad guys access your admin panel, stop DDoS attacks, or just to add an additional layer of security. Here is the way to get it done -- TP-Link:

Login to your default admin panel at 192.168.0.1 or 192.168.1.1 (admin/admin is password and username )

Visit Advanced settings > Network > LAN.

Under"IP Address" field you may change it to a desired address for example 192.168.1.2.

Save it and the router will reboot to use the changes.

Login to your router setup page (username: admin & admin: admin/blank)

Visit Setup > Network Settings.

You will find Router IP Address field.

Change it as preferred and Save Settings.

Login to Linksys router settings page through 192.168.0.1 or 192.168.1.1 or you can access via http://www.routerlogin.net or http://www.routerlogin.com.

After logged in navigate to Advanced > from left side menu go to"Setup" > LAN Setup.

Underneath LAN TCP/IP Setup, you'll see IP Address. Change 10.10.10.1 as favored.

Apply the machine will reboot to update configurations.

In any case during the procedure something goes wrong, then you may reset your router to default settings so all customization will be reverted back. Assessing your WiFi network is important to prevent unauthorized access. Follow basic rules like enabling WPA2 encryption, setting up powerful password, disabling WPS adds more security as it is an old technique of synchronization between networks, empower MAC-address filtering and upgrade your router firmware sometimes. Here's a complete guide about how to guard your WiFi network.