#Czinger 21C Hypercar

[itracing]

Hennessey Venom F5 Sets Road Car Record at COTA

Hennessey Special Vehicles, the Texas-based hypercar manufacturer, has set a new road car lap record at the Circuit of The Americas (COTA) with a blistering 2:10.90 lap of the 3.41-mile-long racetrack.

Breaking the previous COTA road car lap record* by 0.43 seconds makes the track-focused Hennessey Venom F5 Revolution the fastest ever road-going hypercar around the Texan circuit. The flying lap surpassed the 2:11.33 time, recorded by a Czinger C21, plus outpaced the previous McLaren P1 record (2:17.12) by almost seven seconds. During the record-breaking run on March 11, ‘America’s Hypercar’ also hit exceptional speeds on the 1,016 meter-long back straight, achieving 193.10 mph.

*The previous COTA production car lap record was set by a Czinger 21C of 2:11.33 on September 23, 2023. The previous lap record was 2:17.12, set by a McLaren P1.

[dasupercarblog]

Czinger 21C beats Koenigsegg Jesko's Laguna Seca lap record by a whisker

Last month, the Koenigsegg Jesko set a new lap record at the Laguna Seca racetrack in California. The hypercar lapped the circuit in 1 min 24.86 seconds, beating the previous best time set by the Czinger 21C.  A couple of weeks have passed since the record was broken and the US-based hypercar maker has already reclaimed the crown. The Czinger 21C was back at Laguna Seca recently with the sole aim…

[gasorcrash1]

Father & Son Duo Unveil $2.8 Million Czinger 21C Hypercar | Inspired by SR-71 Blackbird via https://www.youtube.com/watch?v=I9Mns1y4OCw via Blogger https://ift.tt/klv3P0D July 14, 2024 at 03:04PM

[ramtracking]

The Hennessey Venom F5 Revolution has set a new lap record at the Circuit of the Americas [ Hennessey Venom F5 ]

The Hennessey Venom F5 Revolution has set a new lap record at the Circuit of the Americas [Highlights] Rather astonishingly the Venom’s time was a whole seven seconds quicker than a McLaren P1. The Czinger 21C is no longer the fastest car around COTA. The track-focused Venom F5 Revolution hypercar has set a new production car lap record at Circuit of The Americas in Texas. Road car lap records…

[carhirenews]

A Look Deep into the Czinger 21C Hypercar

From the September 2023 issue of Car and Driver.There’s usually a trade-off between the cost of the machinery a manufacturer employs to make a part and the cost of producing the part itself. Companies can invest millions in expensive machinery to scale quickly and lower production costs, or they can save capital by investing in […] The post A Look Deep into the Czinger 21C Hypercar appeared first on CAR RENTAL NEWS. https://car-rental.news-6.com/a-look-deep-into-the-czinger-21c-hypercar/

[petnews2day]

Czinger Vehicles Secures Chicago‑Based Boutique Collector Car Dealer Mouse Motors for Distribution of 21C and Future Models

New Post has been published on https://petnews2day.com/pet-news/small-pet-news/czinger-vehicles-secures-chicago%e2%80%91based-boutique-collector-car-dealer-mouse-motors-for-distribution-of-21c-and-future-models/

Czinger Vehicles Secures Chicago‑Based Boutique Collector Car Dealer Mouse Motors for Distribution of 21C and Future Models

Chicago, IL – WEBWIRE – Monday, November 7, 2022

Czinger Vehicles is proud to announce its alignment with Mouse Motors, Chicago’s premier dealership specializing in high‑end antique and performance collector vehicles. Mouse Motors joins a robust Czinger Global Dealer Network, now 14‑strong. This latest dealer alignment comes as anticipation builds for delivery of the 21C and 21C V Max in Q4 of 2023, for which Czinger is quickly acquiring orders. The 21C and 21C V Max will be a limited, 80‑vehicle production.

In August, the automaker revealed its newest body variant, the 21C V Max, as well as the concept for its four‑seater coupe, the Hyper GT. The company’s 21C model is crushing track records and revolutionizing the future of automotive manufacturing with its proprietary technologies; it is the world’s first human‑AI‑designed, 3D‑printed hypercar.

After meeting the Czingers in 2021 during the Velocity Invitational, Michael Marzano, General Manager of Mouse Motors, said he was “immediately hooked“ after hearing about the in‑depth technology behind the 21C. He continued, ”we are honored to be selected as a Czinger partner in North America and are firm believers in what they are building. It took no more than 20 minutes with Kevin and Lukas to know that this brand will revolutionize the automotive industry, and we couldn’t be happier to play a part in their success. Czinger will be a must‑have for car collectors.“

Kevin Czinger, Founder and CEO of Czinger Vehicles, added, ”Mouse Motors recognizes the shift in automotive retail as it continues its move towards a ‘customer‑order process’ versus simply going to the dealer, and providing clients with the full Czinger ownership experience, which extends beyond the car itself. Michael and his team will provide their distinguished clientele insight to appreciate the distinctive performance, design and innovation of a Czinger vehicle. We are very pleased to have Mouse Motors as our Chicago partner and look forward to bringing the 21C to the Windy City in the months ahead.”

About Czinger Vehicles Established in 2019 by Founder and CEO Kevin Czinger, Los Angeles based Czinger Vehicles is an industry‑disrupting performance vehicles brand pioneering a new era in the automotive space by fundamentally changing the way cars will be designed and manufactured for generations to come. Built around a core ethos of utilizing revolutionary, proprietary technology to create vehicles equipped with both dominating performance and iconic design, Czinger’s first production car, the 21C, represents a radical transformation of the manufacturing sector and the future of Human‑AI design within an environmentally sustainable system. For more information, go to www.Czinger.com.

About Mouse Motors Founded in 2013, our passion and appreciation for classic automobiles have led to the creation of Mouse Motors, LLC. We are a premier automotive dealership group specializing in high‑end antique and performance collector vehicles. Consisting of McLaren Chicago and now Czinger Chicago, we are dedicated to providing our clients with a unique ownership experience as they navigate the collector car world. For more information, please visit www.mouse‑motors.com.

( Press Release Image: https://photos.webwire.com/prmedia/8/296376/296376-1.jpg )

Related Links

Source

WebWireID296376

This news content was configured by WebWire editorial staff. Linking is permitted.

News Release Distribution and Press Release Distribution Services Provided by WebWire.

(function(d, s, id) var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src = "//connect.facebook.net/en_US/all.js#xfbml=1&appId=438758792812728"; fjs.parentNode.insertBefore(js, fjs); (document, 'script', 'facebook-jssdk'));

[itcars]

First Look: Czinger Unveils  21C Production Vehicle

Czinger, the trailblazing company that uses an in-house invented Human-AI production system to build state-of-the-art high-performance vehicles, unveiled today its final production spec 21C hypercar. The 21C expresses the apex of Human-AI creativity.

The Czinger 21C, the first model in a series of exclusive performance vehicles – production will be limited to 80 cars – was created in part using additive manufacturing technologies. Each component manufactured using this technology is computationally engineered using AI, optimized for weight and performance, and is beautifully finished by hand. Czinger’s proprietary manufacturing technologies, in-house developed powertrain, and iconic design will guide its future family of vehicles.

This new hypercar showcases significant updates since its first public introduction in March 2020 ahead of the cancelled Geneva International Motor Show, including an updated width of 2050 mm. With 1250 hp and a dry weight under 1240 kg, the 21C achieves a true 1:1 power-to-weight ratio. It also features all-wheel drive with a strong hybrid powertrain that includes:

An in-house developed 2.88-liter, flat crank V8 with twin turbos located mid-vehicle

Two high output electric motors, each powering a front wheel with torque vectoring

An ultra-light, sequential seven-speed automated manual transmission gearbox

Total output of 1250hp redlining at 11,000 rpm (A 100hp upgrade is offered providing 1350 hp)

The 21C V8 is designed to use a range of fuels, including carbon recycled methanol and other e-fuels, so it can be run as a zero emission vehicle

The 21C’s hybrid powertrain uses the world’s most power dense production IC engine as its foundation. It is a 2.88 liter, flat-plane crank V8 with twin turbos located mid-vehicle. The V8 is coupled with an 800V electric drive and regen system. An e-motor drives each front wheel and the batteries are charged during operation both through regenerative braking and a Motor Generator Unit (MGU) using a gear drive that is attached to the IC engine. The total strong hybrid system delivers a peak output of 1250hp (1233bhp).

The hypercar has a top speed up to 281 mph in optional low drag vmax configuration. Putting the driver and passenger in the center position for ultimate weight distribution, aero and driver engagement, its quarter mile time is 8.1 seconds, and it goes 0 to 62 mph (0 to 100 kph) in 1.9 seconds; 0 to 186 mph (300 kph) to 0 in 13.8 seconds and 0 to 248 mph (400 kph) to 0 in 27.1 seconds; 0 to 186 mph (300 kph) in 8.5 seconds; and 0 to 248 mph (400 kph) in 21.3 seconds. It has a >3:1 Lift / Drag Ratio with 615 kg downforce @ 100mph and 2,500 kg @ 200mph (high downforce configuration).

The hypercar is designed, built, and manufactured in Los Angeles using cutting-edge technology tools that are integrated into a patented production system. This system includes automated AI based design and optimization software, patented additive manufacturing driven processes, high accuracy automated assembly and novel performance materials. This revolutionary technology enables Czinger’s design and engineering team to unlock performance and styling not before seen in the automotive industry.

Computationally engineered, printed and assembled, each component is at the frontier of theoretical performance. For example, the front upper control arm is hollow with internal structures allowing it to achieve significant mass savings compared to a traditional tooled variant, thereby greatly reducing un-sprung mass and further driving the 21C’s dominating performance.

The 21C is highly customizable both from a specification and individual personalization perspective. Presented in two fully homologated specifications, a lightweight high downforce configuration and a low drag configuration, both cars are powered by Czinger’s in-house powertrain and display its iconic design language and in-line seating architecture.

Czinger first unveiled its groundbreaking 21C in 2020 and confirmed that its halo hypercar is just the start of a family of exclusive performance vehicles created for the 21st century – all using the company’s in-house developed design and manufacturing technology and proprietary drivetrain.

[mensfactory]

Czinger 21C

[feralf]

[itracing]

Czinger 21C Smashes Lap Record at Laguna Seca 

Czinger, the trailblazing company that uses revolutionary design and manufacturing technologies to build state-of-the-art, homologated high-performance vehicles, has set a new lap record at WeatherTech Laguna Seca Raceway, smashing the old record by an astonishing two seconds!

On July 21 at 7:43pm PT, the Czinger 21C Hypercar, with driver Joel Miller behind the wheel, set the record in a multi-GPS verified time of 1:25:44.  The previous track record was held by the McLaren Senna, with driver Randy Pobst setting a time of 1:27.62.

Under ideal conditions – the weather was clear, with a wind direction of about nine mph NW and an air temperature of 60 degrees – the Czinger vehicle also broke the previous record on two other laps, with times of 1:27:4 and 1:26:6.

The car, which ran on fully road legal Michelin Pilot Sport Cup2R tires, was designed, manufactured and assembled in Los Angeles.

Czinger will showcase the record-setting 21C at the company's private Pebble Beach home during Monterey Car Week, August 12-16th.

[dasupercarblog]

Czinger 21C sets new Goodwood Hill Climb record for production cars

The Czinger 21C has set a new production car record at the Goodwood Festival of Speed. The single-seater hypercar sprinted up the hill climb course in 48.82 seconds. The Czinger 21C features a radical design and is built using the latest 3D printing technology. Each component is computationally engineered using AI and is optimized for weight and performance. The 21C is powered by a mid-mounted,…

[carsthatnevermadeitetc]

Czinger 21C, 2020. The new hybrid hypercar has claimed the  0-400-0 km/h (0-249-0 mph) record from Koenigsegg by running it in 29 seconds (beating the Regera’s 31.49). It is powered mid-mounted 2.88-litre twin-turbo flat-crank V8 coupled to two electric motors giving a combined output of 1,250 PS

[ewrthings-race-repair-repeat]

Czinger Vehicles’ groundbreaking 21C hypercar has showcased some of its performance figures and iconic design lines ahead of the brand and vehicle Geneva International Motor Show 2020 global debut. Czinger has announced that the 21C produces an impressive 1233 bhp and is capable of 0-62 mph in a mere 1.9 seconds. This performance is attained through Czinger's in-house developed, strong hybrid powertrain and optimised, additively manufactured vehicle structure. The 21C is designed, developed, engineered and manufactured from the ground up in Los Angeles, California. Built using proprietary design and manufacturing technologies, the 21C is claimed to be an evolutionary leap in performance vehicle creation.

[diabolus1exmachina]

Czinger 21C (0-400km/h in 29 seconds)

True genius is often elegant in its simplicity. That’s what the Czinger 21C brings to the table in the hypercar class. This American supercar does a lot of things differently, like the 1+1 seating arrangement with the passenger behind the driver like a fighter jet. That slims down the cockpit for improved airflow over the car. The big talking point with the Czinger however, is how some of it is designed and made. Much of the car, including highly stressed componentry like suspension, braking and more, is 3D printed rather than milled or cast. This eliminates the need for expensive tooling and facilitates a refinement of the design process.Take a suspension upright for instance, which conventionally is quite a bulky component. On the Czinger, the hard points and stress areas are put through a computer algorithm, which then generates a component that saves every possible gram of material where it isn’t needed while fortifying areas where it is. These pieces are curvaceous, almost organic-looking, like a prop on an alien spaceship in a sci-fi drama. The truth is that all of these parts are stronger, lighter and cheaper by orders of magnitude than anything that’s come before. The definition of the future.

Czinger’s design and manufacturing tech is patented and ought to change the automotive industry should manufacturers swallow their pride and drop them a line. Really, the 21C is as much a technical demonstrator as it is a commercial exercise. Obviously, it’s got over 1,200PS (883kW) from its hybridised twin-turbo V8 engine, it’s monstered the McLaren Senna for lap times, it looks incredible, generates mega downforce, and is super rare (just 80 are being made)  – it’s a proper hypercar.

[thatxdope]

Los Angeles-Based Czinger Teases The 21C 3D-Printed Hybrid Hypercar - https://ift.tt/2usftCl