#Errors code Epson Pro 3800

[xemtuoi-things-blog]

New Post has been published on Wicreset Utility

Errors code table for Epson Pro 3800

0000 Fatal error does not occur. Printer 1101 CR life error. The CR scan path counter has reached a predetermined level. The end of life of the Ink Supply Tube. Replace the Ink Supply Tube (INK, SYSTEM, ASSY) and reset the counter using the Adjustment Program. In addition, check the statuses of the CR motor (MOTOR ASSY., CR), the driven pulley, the Carriage Unit, and the Head FFC, if any abnormal noise or wear is found, replace the corresponding part(s) along with the Ink Supply Tube. Printer 1120 CR lock error. The CR encoder failed to read the CR scale during a predetermined time period. The carriage unit does not operate due to a CR motor failure or some reasons. Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR scale (SCALE, CR). Move the carriage unit manually to check if it moves smoothly, and fix any abnormality. Replace the CR motor (MOTOR ASSY., CR). Printer 1121 CR reverse error. An abnormal operation (reveres movement) of the carriage was detected a predetermined number of times. Check the CR scale (SCALE, CR) for incorrect attachment, scratch, dirt, and fix any abnormality. Replace the CR scale (SCALE, CR). Replace the CR encoder (BOARD ASSY., ENCODER, CR). Printer 1122 CR overspeed error. The carriage moved faster than a designated level. Check the CR scale (SCALE, CR) for incorrect attachment, scratch, dirt, and fix any abnormality. Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR motor (MOTOR ASSY., CR). Replace the main board (MAIN BOARD ASSY). Printer 1123 Duty over error. An abnormal load is applied to the CR motor. Check the carriage shaft surface for any foreign matters, and remove it if any. Check that the carriage shaft and the contact points between the carriage unit and the main frame are properly lubricated. Replace the CR motor (MOTOR ASSY., CR). Printer 1124 Drive timeover error. One cycle movement cannot be finished during a predetermined time period after power-on. Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR scale (SCALE, CR). Replace the CR motor (MOTOR ASSY., CR). Printer 1125 CR home position detection error. The carriage home position cannot be detected because the Pump Cap unit does not work to unlock the carriage at power-on. Replace the Pump Cap unit (PUMP, CAP ASSY.) and clear the usage counter using the Adjustment Program. Printer 1126 CR lock release error. The carriage unit cannot be unlocked. Replace the Pump Cap unit (PUMP, CAP ASSY.) and clear the usage counter using the Adjustment Program. Printer 1127 CR lock set error. The printer cannot lock the carriage unit. Replace the Pump Cap unit (PUMP, CAP ASSY.) and clear the usage counter using the Adjustment Program. Printer 1130 Overspeed error (PID-load positioning). The carriage speed detected by the CR encorder exceeded the limit. Replace the CR motor (MOTOR ASSY., CR). Replace the main board (MAIN BOARD ASSY). Printer 1131 Drive timeover error (PID-load positioning). The condition to stop the CR motor is not satisfied when the CR motor has driven for a predetermined time period. Replace the CR encoder (BOARD ASSY., ENCODER, CR). Replace the CR scale (SCALE, CR). Replace the CR motor (MOTOR ASSY., CR). Printer 1132 Out of sync. (PID-load positioning). The carriage unit position error detected by the CR encoder fell outside the specified limits. Check that the CR timing belt is properly attached. Check the CR timing belts tension. Correct it if not proper. Replace the CR motor (MOTOR ASSY., CR). Printer 1133 Positioning time-out (PID-load positioning). The carriage unit cannot reach the target position. Check that the CR timing belt is properly attached. Check the CR timing belts tension. Correct it if not proper. Replace the CR motor (MOTOR ASSY., CR). Printer 1134 Integral term overload (PID-load positioning). An abnormal load is applied to the CR motor.Check the carriage shaft surface for any foreign matters, and remove it if any. Check that the carriage shaft and the contact points between the carriage unit and the main frame are properly lubricated. Replace the CR motor (MOTOR ASSY., CR). Printer 1135 Encoder test error (PID-load positioning). Some abnormalities were found in the encoder test result. Check the CR scale (SCALE, CR) for any dirt, and clean it if any dirt is observed. Check the CR encoder (BOARD ASSY., ENCODER, CR) for incorrect attachment, scratch, dirt, and fix any abnormality. Replace the CR encoder (BOARD ASSY., ENCODER, CR). Printer 1221 PF measurement error. An abnormal load is applied to the PF motor. Check all the parts that are driven by the PF motor for any abnormal load, and fix any abnormality. Replace the PF motor (MOTOR, RELEASE, ASSY). Printer 1222 Drive timeover error. The condition to stop the PF motor is not satisfied when the PF motor has driven for a predetermined time period. Replace the PF motor (MOTOR, RELEASE, ASSY). Replace the main board (MAIN BOARD ASSY). Printer 1220 Overspeed error. The motor speed detected by the PF encorder exceeded the limit. Replace the PF motor (MOTOR, RELEASE, ASSY). Replace the main board (MAIN BOARD ASSY). Printer 1223 Encoder test error. Some abnormalities were found in the encoder test result. Check the PF scale (SCALE, PF) for any dirt, and clean it if any dirt is observed. Check the PF encoder (BOARD ASSY., ENCODER, PF) for incorrect attachment, scratch, dirt, and fix any abnormality. Replace the PF encoder (BOARD ASSY., ENCODER, PF). Printer 1224 Out of sync. The positioning error detected by the PF encoder fell outside the specified limits. Check that the PF timing belt is properly attached. Check the PF timing belts tension. Correct it if not proper. Replace the PF motor (MOTOR, RELEASE, ASSY). Printer 1225 Positioning time-out. The PF roller cannot be rotated to the specified point. Check that the PF timing belt is properly attached. Check the PF timing belt?s tension. Correct it if not proper. Replace the PF motor (MOTOR, RELEASE, ASSY). Printer 1226 Integral term overload. An abnormal load is applied to the PF motor. Check all the parts that are driven by the PF motor for any abnormal load, and fix any abnormality. Replace the PF motor (MOTOR, RELEASE, ASSY). Printer 131B Head driver (transmission gate) temperature error. The temperature of the head driver has reached the upper limit. The main board is broken. Check the head FFC for connection status. Reconnect the FFC correctly. Replace the print head. Replace the main board (MAIN BOARD ASSY). Printer 1400 Pressure motor drive timeover. The target pressure cannot be achieved after the Pressure motor has driven for a predetermined time period (40 seconds). The home position of the Pressure pump cannot be detected because the ridges of the accordion unit are adhered to each other, or the Pressure pump home sensor is broken. Check junction of the ink cartridge and the ink cartridge holder and remove any obstruction between them if any. Replace the ink cartridge. Replace the pressure pump (PURESSURE, PUMP, ASSY). Replace the main board (MAIN BOARD ASSY). Printer 1401 Air leaks. The Pressure pump has air leaks. Check that the pressure tube is properly connected. Reconnect the tube correctly if not. Replace the pressure pump (PURESSURE, PUMP, ASSY). Printer 1403 Pressure reducing error. The pressure cannot be reduced. Replace the pressure pump (PURESSURE, PUMP, ASSY). Printer 1404 Pump movement cycle over error. The Pressure pump performed its movement cycle a predetermined number of times (60 cycles), but the pressure does not reach the specified level due to a malfunction of the pump, sensor or motor. Because of air leaks, the specified pressure cannot be obtained. Air is leaking through a gap between the ink cartridge and the ink cartridge holder due to an obstruction between them. Check junction of the ink cartridge and the ink cartridge holder, and remove any obstruction between them if any. Replace the ink cartridge. Replace the pressure pump (PURESSURE, PUMP, ASSY). Printer 1410 Drive time monitor time-out (PUMP). The Pump motor run away out of control. Turn the printer power On and Off. Replace the main board (MAIN BOARD ASSY). Printer 142D Pump cap unit life error. The pump counter has reached its upper limit. Replace the Pump Cap Unit (PUMP, CAP, ASSY), and reset the counter using the Adjustment Program. Printer 1425 CSIC communication time-out. The printer cannot read/write data from/into the CSIC of the ink cartridge or the maintenance cartridge. Check the connection between the CSIC and the main board and fix any abnormality. Replace the ink cartridge or the maintenance cartridge. Replace the main board (MAIN BOARD ASSY). Printer 1430 Holder ink pad error. The ink cartridge installation/removal counter has reached the specified limit. Replace the ink pad in the holder (POROUS PAD,TRAY,INK EJECT) and reset the counter using the Adjustment Program. Printer 1431 Ink selector error. The number of drives of the Ink Selector has reached the specified limit. Replace the Ink Selector (INK, SYSTEM, ASSY.) and reset the counter using the Adjustment Program. Printer 1432 Ink selector drive timeover. Changing the ink path by the Ink Selector cannot be completed during a predetermined time period due to a malfunction of the Ink Selector (its sensor or motor). Replace the Ink Selector (INK, SYSTEM, ASSY.) and reset the counter using the Adjustment Program. Printer 1434 Ink cover unlock error. The cartridge cover cannot open due to an obstruction on the top of it. The ink cover open sensor is broken and cannot detect an open/close status of the cover. The ink cover solenoid is broken and cannot unlock the cover. Remove any obstruction on the cover. Replace the ink cover Open sensor. Replace the ink cover solenoid. Printer 1501 Release phase detection error. The release roller position sensor cannot detect the actuator after the release motor has driven a predetermined number of steps. Replace the release motor (MOTOR, RELEASE, ASSY). Replace the release roller position sensor (Release Sensor). Printer 1502 Drive time monitor time-out. The condition to stop the release motor are not satisfied when the release motor has driven for a predetermined time period. Replace the release roller position sensor (Release Sensor). Replace the release motor (MOTOR, RELEASE, ASSY). Printer 150C PF phase detection error. The APG sensor cannot detect the origin point when the APG motor has driven for a predetermined time period. Replace the APG motor (MOTOR, ASSY, APG). Replace the APG sensor. Printer 1511 Drive time monitor time-out (APG). The APG motor run away out of control. Turn the printer power On and Off. Replace the main board (MAIN BOARD ASSY). Printer 1520 Drive time monitor time-out (CR). The CR motor run away out of control. Turn the printer power On and Off. Replace the main board (MAIN BOARD ASSY). Printer 1531 ASF phase detection error. A status detected by the ASF sensor does not change when the ASF motor has driven for a predetermined time period. Replace the ASF motor (MOTOR, ASSY, ASF). Replace the ASF sensor. Printer 1535 Pressure pump home detection error. The home position of the Pressure pump cannot be detected at power-on because the ridges of the accordion unit are adhered to each other, or the Pressure pump home sensor is broken. Replace the Pressure Pump (PURESSURE, PUMP, ASSY). Replace the main board (MAIN BOARD ASSY). Printer 1550 Borderless print ink pad error. The counter for the waste ink used at the bleed-off margins for borderless printing has reached its upper limit. Replace the ink pad for borderless print (POROUS PAD, INK WASTE BOX, RIGHT/LEFT) and reset the counter using the Adjustment Program. Printer 1600 Paper width sensor obstruction error. A foreign substance on the platen was detected at power-on. Remove any dirt or foreign substances from the plate. Replace the PW sensor (BOARD ASSY., DETECTOR, PW;B). Replace the CR motor (MOTOR, ASSY, CR). Printer 1601 Paper width sensor malfunction. The PW sensor is broken. Replace the PW sensor (BOARD ASSY., DETECTOR, PW;B). Printer 1A23 Invalid RTC data. The various absolute time data stored in the NVRAM is abnormal. Reset the RTC using the Adjustment Program and set the correct date and time. Printer 1A26 RTC communication time-out. The RTC circuit on the main board is malfunctioning: Turn the power Off and remove the lithium battery; After a several seconds, reattach the battery and turn the power back On; If the printer recovers from the error then reset the RTC using the Adjustment Program and set the correct date and time. Printer 1A37 Thermistor sensor error. The head FFC is not correctly connected. The head thermistor detected the head temperature fell outside the specified range. The head thermistor is broken. Check the head FFC, and reconnect it correctly. Replace the print head. Printer 1A38 Transistor ambient temperature error. The transistor is broken. The thermistor detected a temperature outside the specified range. Replace the main board (MAIN BOARD ASSY). Printer 1A40 IC22 error. The destination setting is wrong. Correct the destination setting. Printer 2000 NVRAM error. An NVRAM erase or write error has occurred. Replace the main board (MAIN BOARD ASSY). Printer 2002 SDRAM error. An SDRAM read/write error has occurred. Replace the main board (MAIN BOARD ASSY). Printer 2003 FLASH BOOT SUM CHECK error. Failed to install the firmware. The FlashROM is broken. Reinstall the firmware. Replace the main board (MAIN BOARD ASSY). Replace the main board (MAIN BOARD ASSY). Printer 2009 FLASH SUM CHECK error. Failed to install the firmware. The FlashROM is broken. Reinstall the firmware. Replace the main board (MAIN BOARD ASSY). Replace the main board (MAIN BOARD ASSY). Printer 200A Firmware loading error. The SDRAM is broken. Replace the main board (MAIN BOARD ASSY). Printer 200B Insufficient internal memory. There is something wrong with the firmware. Install a normal firmware. Printer 3000 AC power line shut-off. The AC power was shut off due to a power failure, unplugged, power supply board failure, or main board failure. Check the power cable (from the power outlet to the socket on the printer) for poor connection or breaks. Replace the power supply board (BOARD ASSY., POWER SUPPLY). Replace the main board (MAIN BOARD ASSY). Printer

Errors code reference for some Epson printer

[legaldriverscollectiongdx-blog]

DOWNLOAD MX440 AGP DRIVER

File Format: exe Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X Uploader: Boo File Version: 717121660 File Name: mx440 agp driver Downloads: 6786 Price: Free File Size: 23 Mb Download Type: http Date Added: 14 November, 2019

What's New: - Multi-Language Interface(mx440 agp driver Interface) - Fixed(mx440 agp driver Fixed) a bug where the guest account was enabled after the firmware update was complete. - Fixes failure of resuming from S1 in Win 2000/XP. - Fixed detection error of ATA66 harddrives. - Fixed some special characters set as System password, then later UI cannot login issue(thus need to restore to default). - Fixed various UI issues. - Fixes(mx440 agp driver Fixes) malfunction of serial mouse after wake up from S1 in Win 98 SE.# Updates BIOS flashing utility. - Fixed input/output error issue with HD2-formatted HDD. - Fixed the issue that the system sometimes may not be able to boot when install the CPU A64 X2 3800 "ADA3800IAA5CU". - Fixed a bug where NAS did not respond during a disk check if the unit contained too many files. - Settings] - Fixed a bug where(mx440 agp driver where) unexpected error message was displayed while multiple replication tasks are edited. Users content: Changed: CAPTCHA disabled by default. Specifications:CPU: - Intel Celeron Dual-Core J1800 SoC onboard Processors Memory: - 2 x SO-DIMM, Max. Change the copyright year in the web-UI to 2016. Type C:DELLDRIVERSR211909 in the Open textbox and then click OK. This self-extracting file contains the Epson Stylus Photo 925 Printer Driver v5.3eA for Windows 2000 and XP. EXE AP5C/P Bus Master IDE Driver/OS2-Win BMIDEOS2. Update CPU/APU micro code. You can install the following items of the software: ScanGear: The TWAIN-compliant scanner driver for Canon color image scanner. - The master DWS-4026 fails to push AP configuration to the peer switch and the DWL-8600AP s managed by peer switch. Node names can contain only numbers, letters, and dashes; underscores, spaces, and other punctuation are not allowed. DOWNLOAD COREGA FETHER USB TXS DRIVER Supported OS: Notebook 8.1/8/7 32-bit Windows 7 32-bit Microsoft Windows 8 Pro (32-bit) Microsoft Windows 8.1 Pro (32-bit) Windows 8.1/8/7/Vista 64-bit Windows Server 2003 64-bit Windows Vista 32-bit Microsoft Windows 8.1 Enterprise (64-bit) Windows Server 2008 R2 Microsoft Windows 8.1 (32-bit) Windows 8.1/8/7/Vista 32-bit Microsoft Windows 8 Enterprise (64-bit) Microsoft Windows 10 (32-bit) Microsoft Windows 8 Enterprise (32-bit) Microsoft Windows 8 Pro (64-bit) Microsoft Windows 10 (64-bit) Microsoft Windows 8.1 Pro (64-bit) Windows 2000 Windows XP 32-bit Microsoft Windows 8 (64-bit) Windows 8 Windows 7 64-bit Windows Server 2012 R2 Windows 8.1 Windows Server 2012 Microsoft Windows 8.1 Enterprise (32-bit) Windows Server 2008 Windows 7 Windows 10 Notebook 8.1/8/7 64-bit Windows Server 2003 32-bit Windows Vista 64-bit Microsoft Windows 8 (32-bit) Windows Server 2016 Windows XP 64-bit Microsoft Windows 8.1 (64-bit) Searches: mx440 agp B18y; mx440 agp driver for Microsoft Windows 8.1 Enterprise (32-bit); mx440 agp driver for Windows Server 2012; mx440 agp B BT185-1; agp driver mx440; mx440 agp Byv185-yvq; mx440 agp driver for Microsoft Windows 8 Pro (64-bit); mx440 agp driver for Windows Server 2008; mx440 agp BTILS1854; mx440 agp BT1854; mx440 agp driver for Windows Server 2003 64-bit Compatible Devices: Wifi adapter; Keyboards; Usb Cables; Wifi router; Soundcard; Hard Drive To ensure the integrity of your download, please verify the checksum value. MD5: a8b88f65caec47d7e3e48944a1b421f3 SHA1: 4e388d9e09b7dd34c7d7d3154ad47cb857531a45 SHA-256: 4c57a57cd07db2e713d9ebb61bedced8acfb1dc96bb30c6e9f389337c6f35a18