#Just4Programmers

[just4programmers]

NHS: The Benefits Of New Technology

If you’re involved in the medical profession, then you’re sure to be aware of the technological changes that have been going on over the last few years to make the NHS better for patients. If you haven’t had any NHS treatment recently, then you might not know what technology For Health is all about, and how it will help you. Reasons why IT services Midlands can help in the new NHS technology.

1. The NHS technology For Health programme is a Directorate of the Department for Health, and so a government scheme for improving the healthcare of patients. The innovation discovered a long time are now put into practice

2. Using technology, medical records can now be shared between NHS departments and GPs and dentists, quickly and easily. This means that, for example, your GP can see if you’re on medication because you recently had an operation, or your dentist will know if you’re allergic to certain painkillers.

3. Electronic Medical Records have been introduced, which are much better than paper-based records. For example, they are easier to store, more accurate and won’t be lost. This also brings an end to having to read the infamous Doctor’s Handwriting.

4. The main aim is to provide more choice and better care for patients. Patients can choose from different appointment dates and hospitals, to make it much easier for them, and to reduce the number of people who fail to attend appointments. There are many more benefits for patients too.

5. Technology for Health makes providing healthcare more effective and better for NHS staff. Healthcare professionals can now be more productive, and provide better healthcare for their patient’s thanks to advances in technology.

6. Electronic prescriptions have been introduced which can be printed out at pharmacies, rather than in surgeries. This reduces fraudulent use of prescriptions and ensures that prescriptions don’t get lost en route. It also implies that you can have your prescription sent to the most appropriate pharmacy for you.

7. It’s now quicker for patients to get appointments, as there is a choice of different hospitals to make it more convenient.

  8. Thanks to the advances in digital imaging, X-Rays, ultrasounds and other images can be shared between NHS departments, and surgeries, around the country as necessary. There’s now no need to carry your X-Ray from one hospital department to another. If you move house or are treated elsewhere, it’s now much easier for your new hospital or GP to see your previous X Rays or ultrasounds, which means that if there are complications, the image can be viewed much quicker. Previously, these images would need to have been sent by taxi or courier.

9. Electronic medical records also mean that if you move house, or change Doctors for other reasons, your records can be transferred electronically immediately, rather than having to wait several days or even longer. This method also means that patient records won’t get lost in transit.

Now you know some of the main benefits of technology For Health, how it will make your medical treatment quicker and more effective, and how healthcare staff can benefit too, perhaps it’s time for you to think more about the NHS.

from Just4Programmers http://www.just4programmers.com/nhs-the-benefits-of-new-technology/

[just4programmers]

4 tips for your local SEO

1. Set up your Google My Business page.

At the point when individuals are searching for a nearby business, Google is commonly the primary spot they look. In the wake of accepting your postcard, you can confirm your business and include data, relatively like a web-based social networking page. At that point, you can consist of business hours, photographs, telephone numbers and a connection to your site. Another extraordinary part of asserting your business can get and react to surveys, which is a brilliant device for client commitment. The following are extra tips to upgrade your Google My Business page:

Pick the right classes for your business. This guarantees a general look for handymen (or whatever) close me will incorporate your business.

Don’t skirt the depiction area. Compose a careful, point by point, the infectious portrayal of items or administrations your organization offers.

Request that unwavering clients post legit audits of your business on Google.

Transfer a lot of complimenting business photographs. Make sure your business is neither excessive exhaust nor excessively bustling when you photo it. It should give off an impression of being prominent, yet not all that bustling that it turns individuals off.

2. Blog about nearby occasions and news.

Expound on subjects that local people will scan for. Is the yearly Renaissance Fair drawing closer? Set aside an opportunity to blog about the subject, and influence it to identify with your business pertinently. Go to neighbourhood occasions, and welcome your group of onlookers to go along with you. Expound on neighbourhood occasions via web-based networking media locales, as well. Ask adherents whether they intend to go to nearby occasions, and let prevalent sentiment impact your substance methodology. This encourages certified client commitment. Piggybacking off nearby occasions is a sharp method to help your neighbourhood SEO.

3. Include neighbourhood portrayals.

Composing viable meta descriptions about foreseeing potential customers needs while looking for organizations. Google as of late changed its meta depiction length from 160 to 320 characters. This doesn’t imply that you should utilize every one of the 320 characters, however, utilize the space carefully by including appropriate nearby expressions. A decent meta description should represent three particular snippets of data: – Your business arrangement. – Your client’s issue. – The result of your administration.

To advance these means for your zone, incorporate topographically particular terms, for example,

Question and answer plumbing has been serving the South Beach zone for a long time. We have practical experience in stopped up channels, spill repair, trash transfer establishment and water warmer repair for Miami, Coral Gables, Fontainebleau, and Hialeah. Call us presently to settle all your pipes issues.

Meta depictions don’t straightforwardly influence your site positioning in Google, yet they will influence the importance of your site for specific watchwords customers may utilize. Along these lines, audit your meta depictions to perceive how they could be better custom fitted to your neighbourhood showcase. If need be, augment your representations by exploiting Google’s widespread character distribution.

4. System with other neighbourhood organizations.

Make decent with neighbouring organizations and adjacent charities. Take after other nearby organizations on the web, and remark on their posts. Most are probably going to respond, and adding to others exchanges can enable you to achieve new individuals.

Frame harmonious substance connections. Consider inviting neighbourhood visitor scholars onto your blog. Welcome entrepreneurs with shared interests to compose for your site. For instance, in case you run an RV organization, manufacture an association with nearby campgrounds to grow your gathering of people.

from Just4Programmers http://www.just4programmers.com/4-tips-for-your-local-seo/

[just4programmers]

Developers silly ideas

Unnecessary error messages

There is nothing as upsetting, puzzling or emotionally unsettling as an error message. Common in Windows, error messages which in most scenarios are usually absurd also manifest in other platforms. You will come across many types of useless error messages. In our case, we will highlight a few examples based on Microsoft extensive page which explains what to do or not to do when creating error messages which is applicable to messages universally.

Excess technical details

Such an error message is composed of specialized information that the user cannot understand. An error message that is largely created using scientific language puts off an average user. The user does not bother to read it. They are incapable of developing a basis for solving the problem.

Programmers also have a habit of communicating programming errors using the end-user dialog box resulting in a secondary kind of this error. Users end up becoming very mixed up by useless memory violations or variable problems which result from errors.

Shifting the blame to the user

Error messages have a tendency of shifting the blame to the user. Users should not be made to shoulder any blame merely because of making an unintentional mistake. Neither does using cruel language help. It makes users more frustrated.

Lack of clarity

It does not help to create an error message that is very ambiguous. The user is at a loss on what to do when an error sound is detected followed by unknown error. If there is no bit of supportive details regarding the error, a user will click ok and ignore it.

Useless errors

Endless popup ads have encouraged most users to speedily eliminate dialogue boxes. Though error messages are in some instances useful, their continued use increases the possibility of users assuming them. It is an unwise move to create error messages for imaginary problems.

For example, where a user decides to abort a backup operation it is unnecessary for an error message to inform them of their action. Since they initiated the action, a dialogue is not necessary though the action might be interpreted as an error from a softwares perspective.

Forms and selection boxes that are awful

The expected type of input is the most important regardless of a programmer’s preferred option: selection boxes, dropdown lists or requests a user to key in a value. Ordering alphabetically is very suitable for dropdown boxes as it makes it simpler to browse the list. But it is very difficult to browse through a list of floors in an ABC order as opposed to a numerical order.

Inline authentication failure

This is definitely where programmers make users almost go nuts. It is annoying to go through too many fields on a page during a job application process or when signing up for a service only for an error message such as invalid email address field to display when you click next.

Then the worst happens when you reload the page. All the data you typed is erased. A user consumes more time typing the same data yet the problem could have been avoided if only the programmer had made sure inline authentication exists facilitating validation of input before you submit it.

The post Developers silly ideas appeared first on Just4Programmers.

from Just4Programmers http://www.just4programmers.com/developers-silly-ideas/

[just4programmers]

Data Centre Relocation

Data center relocation is certainly a complex task. This is in sharp contrast to your regular corporate move. During a corporate move, you only need to break down, store, ship and reassemble equipment. As for relocating data centers, you have to take into consideration important matters such as ascertaining availability and accessibility of customer data. If it is your first time to relocate data centers, consider seeking server relocation services to save clients’ time and to shield your business from any potential risk. Strategies such as careful planning and preparation and familiarizing with the existing options ensures successful relocation of data center.

The two common models for relocating a data center are push/pull (physical move) and virtual/application migration.

Push/pull model (aka Lift and Shift) It is synonymous with relatively small data centers. It poses more risks but relatively cheaper than the virtual migration model. It is not as complex as a migration and generally entails detaching the constituents of the data center, relocating and reconstructing them. Its major shortcoming is that during relocation, the data center is usually not in use. Further, the disassembling and reassembling of the data center constitutes poses some level of unpredictability. This situation is unfavorable for clients that use this model.

For effective data center relocation via push/pull method, the data center staff should thoroughly draft an inventory that captures all the components in every rack to ensure they are reinstalled exactly in their respective slots at the new data center location. Prior to the move, setting up networkconnectivity is crucial and so is mapping the correct power assignments. As soon as the move happens, it is essential to note power utilization immediately the new data center is online. Power stability has to be maintained throughout the infrastructure from UPS to the rack level. It is also important to maintain airflow stability at the rack level to enhance favorable environmental conditions and utmost efficiency.

There are important factors to consider during a physical move. Find out the racks static and dynamic load ratings when moving populated racks. The dynamic load ratings are in most cases lighter, and a rack structure which has its casters as the most vulnerable part will become dysfunctional if overburdened. Shock pallets should be used when packing racks. Thereafter, the racks should be loaded into the moving trucks. Tip guards should be utilized to avoid damage (through small bumps and jostles) to equipment that is being relocated for the first time. When in motion, racks can easily tip irrespective of whether rolling around a facility or anchored in the truck hence the need to use tip guards. As cheap as they are, tip guards can be great saviors when handling racks.

Sun Modular Datacenter

Migration A data centre migration consumes more time and is very efficient as opposed to a push/pull move. This method assures uptime during relocation through creation of a duplicate data center. Prior to relocation, duplication of the computer environment of the production data center occurs. The duplicate data centre is subjected to testing for network connectivity and applications for a minimum of three times. Upon validation of the test results, the data centre environment is “frozen”. It is only after a successful move that the hardware environment, networking environment and the computer environment cease to be static. Afterwards, records and applications can be updated. The firmware should not be updated to avoid occurrence of conflicts. Since data center duplication has to be done to facilitate constant uptime and also careful testing of the environments, migration takes a lot of time and is relatively expensive compared to the push/pull move. Nonetheless, migration sees to it that data center relocation is done in a way that greatly reduces challenges that data center tenants encounter.

Upon the completion of relocation, the equipment in the initial production data center has to attend to. Security has to be maintained by wiping disks and clearing applications from storage arrays. As for hardware such as large server racks, it can be traded to acquire monetary gains from the metal. When it comes to advanced hardware, the best option is to do repairs then resell. Such hardware includes: processors, storage arrays, networking equipment and structured cabling.

Irrespective of your preferred method, relocating a data center is an engaging affair that comprises moving parts in plenty. You have no choice but to undertake well thought out planning and all the preparations necessary for relocation. Also, it is obligatory to execute practices that promise a great outcome in the end. A fully, functional new data center is the key to success with respect to your company’s future expansion goals.

The post Data Centre Relocation appeared first on Just4Programmers.

from Just4Programmers http://www.just4programmers.com/data-centre-relocation/

[just4programmers]

The best job in the IT industry

As always, some things never change in the ever-evolving IT industry. Recruiting talent is still as difficult as ever and demand outweighs supply. The gig economy is growing and, according to some reports, up to 40% of the workforce is expected to be part of it by the year 2020. New companies and technologies are constantly emerging and that’s great, but it is pretty much yesterday’s news. So, let’s take a look at what’s hot and what isn’t.

Hot: Security

Despite the fact pretty much everyone nowadays is aware how detrimental to a company it can be to be exposed to risk, many seem to be unprepared. The media keeps talking about cyber security, but to no avail. When it comes to security jobs, the demand greatly outweighs the supply. Just like with java remote jobs, we’re seeing a rise in security remote jobs, but also more full-time and in-house workers. The increasing demands for developers familiar with Ruby, Java and Python comes as no surprise either.

Cold: Job Security

Funnily enough, as hot as security jobs and java remote jobs are at the moment, actual job security does not seem to be too high. The bigger a tech company is, the shortest the job tenure. Giants like Amazon and Facebook have the average job tenure of less than 2 years, which is a lot less than in most industries. But, this is not black and white. Yes, 2 years is a lot less than in most industries, but IT companies are by far the most aggressive when it comes to hiring. This, consequently, leads to more job jumping than in other industries. Essentially, people who work in IT tend to switch jobs more often than others and that isn’t really anything new.

Hot: Upskilling

Upskilling is always hot and it is no different this year. According to some reports and surveys, the ability to upskill on company time is one of the most desirable job benefits. In fact, most people surveyed claim that keeping up with the newest trends and developing professionally is the number 1 reason to accept a job. Considering the industry is developing and growing so fast, it is no wonder most IT professionals want to stay on top of their game.

Hot: Flexibility

Workplace flexibility is, predictably, on the rise. Even for companies that want all of their staff based at their headquarters.

Cold: Full-time Remote Work

If you’re looking for java remote jobs or something similar, you may be surprised to learn that these things are not nearly as common as one would believe. Huge companies like Reddit, Yahoo and IBM have made a conscious effort to pull workers back to the headquarters, unless the worker specifically asked to work remotely full time.

Hot: Soft Skills

Soft skills are in demand. Everyone is after recruiters, annalists and executives.

Cold: Perks No One Needs

Since companies are having a really hard time keeping (and recruiting) talent, some throw ridiculous, practically useless job perks to improve the job offering. This may not help them or their image in the long run.

The post The best job in the IT industry appeared first on Just4Programmers.

from Just4Programmers http://www.just4programmers.com/best-it-job-industry/

[just4programmers]

Native, Web, Hybrid or apps?

In today’s time business apps are a must for every business small or medium. Only web presence is not sufficient, since online activity has shifted to mobile. In other words, for small business owners smartphone apps is now very important as a marketing tool. Mobile app development company London and its management team can operate their systems more efficiently, and can involve existing customers in a better way and attract new ones.

Development of high functionality and good quality apps is challenging, expensive and resource intensive at the same time. Other challenges like compatibility of the app across multiple device and all the known operating systems with back-end integration problems are also existent.

Sometimes these hindrances slow down the app development rate. Globally a quarter of enterprises have not been able to build any kind of virtualized or customized mobile apps in last year as reported by Gartner.

Some main challenges faced while doing business app development are discussed in this article.

Slow development times with Skills shortages 

Usually one of the main issues faced by companies is in terms of lack of skilled resources who are undertaking mobile development and eventually results in slow development. Some IT professionals claim that it may take six to nine months and in some cases 1 year if the complexity level is very high in developing a mobile app or custom application.

Integration issues

Mobile app development company London and other companies face another challenge is that of integrating the developed apps across devices of multiple manufacturers having vivid operating systems with differing sizes. This may include iPhones, iPads, Windows and Android phones and plus Windows, tablets, Apple and Linux desktops.

Native, Web, Hybrid or apps?

Business must also decide the types of apps development needed. Is it hybrid apps or full Visual Studio or web apps or Xamarin projects that should be developed to deploy native apps? They must also determine the kind of development challenges involved with each.

Database synchronisation, integration 

Another major challenge is database integration and synchronisation. The apps made by companies like mobile app development company London must be compatible and integrate with different database systems such as multiple kinds of SQL databases, MultiValue databases, and needs integration and synchronization with back-end systems.

Beating the challenges

The above mentioned issues may be overcome. Developing and deploying hybrid, web and native apps may be made faster and less expensive by the help of proper rapid app development tools. With a tool like that, businesses can develop apps suitable for various device types or platforms and can integrate with databases like SQL and others, by use of code base and unique design project. Developers must write code for every device once and the app can be run on tablets, mobiles and desktops.

These tools provide multiple options to design apps and developers are no more constrained by the way data is stored or data from various databases that needs to be used or accessed in one single app. The apps must integrate with back-end systems completely, and also take care of the immediate data synchronisation between back-end databases and systems and user devices.

A proper fast app development tool from companies like mobile app development company London must be loaded with many features including typical RAD environment, menu creation, data management and styling, integration of specific device features, with WYSIWYG screen designer. This will enable businesses to develop user interfaces quickly and cost effectively, manage and define their data, and lastly using business logic components of products for creating apps quickly. No additional developers have to be hired and existing staff can do the work with a simplified development process.

Such products will be able to offer the option for businesses for generation as hybrid or as full, web, industry-standard Xamarin projects and Visual Studio, and this can be deployed as native apps or become part of the IT teams’ development programme onward.

Australian based Solutions4Strategy, a provider of consultancy and software services is one company that was successful in using rapid app development tools for driving business growth, and also helps companies with risk management, strategic planning, compliance and regulation.

The challenges

This company and others like mobile app development company London found that installation of software on client’s desktops was getting very resource intensive and expensive on management and maintenance. The software failed to be compatible with client’s updated technology and to fix the back-end integration issues was daunting.

  The post Native, Web, Hybrid or apps? appeared first on Just4Programmers.

from Just4Programmers http://www.just4programmers.com/native-web-hybrid-apps/

[just4programmers]

Digitalising IT as an enabler

The company is changing service delivery from a being a back-end IT support technologies to a provider of new and digitally enabled services that are powered by artificial intelligence (abbreviated as AI) as well as machine learning.

As we all know, BMC has been trying its best to make sure its products are appealing to business leaders who are deemed to be in charge of digital strategies.

In one of the blog posts about last year’s BMC Engage conference, the principal analyst at Forrester, Nigel Fenwick explained in the article that the company had uniquely positioned many of its products to help teach leaders to provide and deliver a more flexible and efficient tech capability for the business.

Nigel continued to say that past three years, BMC has been rebranding its product and refocusing its strategies to collaborate with many other customers around the digital world. That is not enough though; it has been undergoing its digital transformation in a bid to unveil a solution-oriented strategy and approach to customers.

As a result, BMC has now introduced the infamous Digital Workplace, which is a cloud-based service that re-defines the forthcoming of digital work by changing the digital workplace experience with workforces at the centre. According to Tyler Lowe, who is also one of the BMC customers as well as the vice-president at the Bank of America, the whole idea is to deliver employees a self-service. Lowe further said that creating an effective digital workplace does not require people to think about a workplace, instead of how workers have access to the apps, information, and services they need without relying on someone else.

The president of digital service management at BMC, Nayaki Nayyar, said that the future of work at this company would be to build a transformative digital workplace(s) that will empower and engage employees by typically placing them at the mid of an increasingly intellectual enterprise.

Digitalising IT as an enabler

It is undeniable that the attempts by BMC to digitalise its workplace are an indicator that it is aligning itself to the digitisation trend. In one of the recent posts, the CEO of ITSMF (IT Service Management Forum), Barclay Rae, emphasized that fact that digital transformation requires a rethink of business and IT. In other words, moving forward, the technology should work business and not as a separate of it or against it. He further said that these strategies need to be refreshed and new ideas, which will be driven by business expectations rather than merely technical or financial constraints. The driver is now based on collaboration as well as working to achieve shared goals.

There are many examples to demonstrate joined-up-thinking, but the lately won digital transformation venture of the year by the Woking IT Services  is just one of them. It is believed the idea towards the transformation programme started as simple website refresh, but it soon evolved into a whole renovation of council services.

The council has now begun to break down silos between restructuring and departments and joining up how routine services are run in line with the new customer-based approach. In the next phase, the council is looking forward to advancing integration for back-end transactions as well as the development of AI processes.

  The post Digitalising IT as an enabler appeared first on Just4Programmers.

from Just4Programmers http://www.just4programmers.com/digitalising-it-as-an-enabler/