#SecurityDevicesInIndia

[qutak-smoke-detectors-posts-blog]

How Electronic Siren Different From Motor-Operated Siren?

When it comes to preparing the list for security devices to be installed in the building for the safety of the public residing in the premises, electronic siren must be on the top. Electronic siren is helpful in producing loud noise and provide alertness to the people around to escape from the dangerous scenario. Electronic siren is the device that is designed as a modular in construction and can transmit pre-recorded or existing voice messages in appreciation to traditional tones. They are intended to perform silent tests at a user-defined time period which circumscribes the operational inclination of the siren. A full range of control material is available: stand-alone hardwire switch lever; computer system controller; radio and/or satellite controlled link units. Visit only the certified Electrical Siren Supplier and Manufacturer in order to get the high-grade siren that works for years. The sirens are used on emergency vehicles, public protection transports, and other crowded areas. 

Qutak Security Devices are involved in producing high-grade electrical siren for the purpose of safety at commercial and industrial areas to announce the people about any unexpected conditions. The material used for making electrical sirens are highly updated and advanced technology which make it ensure that it performs better. Besides electrical siren, it also designs and manufactures different fire safety devices to keep the people and property safe from fire conditions. Qutak produces the best kind of Fire Security Devices In Delhi, so you must once make a visit to the store for quantified devices.

What are the functions that an electronic siren perform?

* An electronic siren should be capable of fault diagnosis and silent test facility as the siren must be performed with silent tests at a user-defined time period in order to determine the operational capability of the siren and then relays the results to a monitoring point.

* More than 8 different user-defined alarm signals can be activated via volt free contacts at a single time within the pockets of the electronic siren.

* The electronic siren works on the battery-powered siren operation that means the loss of electric power will not have any effect on the functionality of the electronic siren. 

* Only a little of AC power supply is required for maintaining the battery charged.

* There are siren systems also available which can be charged from a solar panel array for use in remote locations where electricity supply is minimal. 

* There are variable sound levels for different warning signals for on-site and off-site warnings through the single siren. 

* You can play pre-recorded voice notes or public address (PA) messages on these computer-controlled sirens.

* The installation cost is very low as the electronic siren only requires about 110/230V AC supply instead of the 400V AC 3 phase supply required for motor-driven sirens. 

Advantages of the electronic siren: 

*  There are different sound levels available for the required warning signals 

* The electronic siren has ambient noise level producing low-to-high sound on adjusting

* Batteries are connected which works when the power supply is cut off. 

[qutak-smoke-detectors-posts-blog]

A burglar alarm is a security product that is efficient in detecting any unauthorized activity or motion into the property. After detection of an eventual activity, these alarms send an immediate alert to the controlling unit or to the occupants.