#dp mass depot

[binabadanmalaysia]

https://binabadan.com/blogs/workout/workout-routines-the-ultimate-guide-for-men

[binabadandotcom]

DP MASS DEPOT 7.5LB (3.4KG) WITH FREE GIFT

[mygarage]

Drivers for Dummies: A Newbie Guide to Drills and Drivers

Just like everything else in the market, it’s only wise that you do a bit of research first before buying your power tools and in this article, we’re going to be focusing specifically on drills. This article was formed to better help you, our reader, to decide on what to spend your hard-earned bucks on.

Corded and Cordless Drills

Drills are power tools that excel in drilling holes into wood, concrete, and steel. If you ever decide to purchase a drill to add to your shop, you will eventually come across a dilemma whether to get a cordless drill or a corded one. When considering which drill to purchase, it’s important to keep in mind the difference between the two.

Corded Drills

Corded drills traditionally have more torque and a higher RPM (revolution per minute) and can be exploited for longer use without shutting off. You would often use a corded drill for heavy-duty work in drilling holes in wood, concrete, and steel. These are usually powered by a 110 to 120-volt electric cord.

Cons: Having a corded drill could mean having to lug around extension cords, due to most corded drills being installed with only a 6-ft wire. You will also have to be constantly pulling on the cord to unplug it when moving around your shop, and that might be frustrating.

Pros: One thing to consider when starting out doing DIY projects is that corded drills are essentially more affordable compared to cordless drills, a big factor on why is because you won’t be required to buy any extra batteries and not having to worry about battery life and recharging.

If you’re considering purchasing a corded drill, we recommend that you go for the Black and Decker DR260C Corded Drill. This light-weighted corded drill does a bang-up job in drilling into wood, masonry, and metal, with the 5.2 amp power it produces. It also provides ample variable speed for good control during drilling and driving.

https://www.amazon.com/BLACK-DECKER-Corded-5-2-Amp-DR260C/dp/B00T2VJ93C

Cordless Drills

Cordless drills, on the other hand, are battery-powered and don’t require you to plug them into any outlets. Its battery life depends on the amp per hour; the greater the amp per hour, the longer the battery life.  Unlike corded drills, cordless ones have either a 3/8 or ½ inch sized clutch that enables them to drill and drive with a bit stripping/snapping preventive mechanism. Cordless drills can be used to drill holes into wood, concrete, and metal. You can also use them to screw in fasteners.

Cons: Cordless drills are a much bigger investment because you will be purchasing as many batteries as you have tools and each battery can cost you at least $60. You can also expect compatibility problems as not all batteries will be compatible with your drill. Another itch you’ll encounter is the running out of battery life and having to recharge them from time to time.

Pros: You can work from point A to point B without having to worry about tripping on its cord and lugging extension cords around. As long as you have good quality drills and batteries, cordless drills can be very reliable and powerful to work with, they are also traditionally more durable as compared to corded drills. The clutch mechanism in a cordless drill is adjustable to your preferred setting where a corded drill would normally have a fixed clutch. In terms of longevity, the brushless motors found in cordless drills can perform more efficiently than that of the corded.

If you're just starting out and looking for a quality yet affordable cordless drill, we recommend the Makita XT269M. Its efficient BL brushless motor is electronically controlled to optimize battery energy use to up to 50% longer run-time per charge. It has a 2-variable speed ½ inch Hammer Driver Drill. It is equipped with a max torque and its light-weighted to only 4.2 pounds including the battery. You can purchase a combo kit for only $249.00 on Amazon.

https://www.amazon.com/Makita-XT269M-Lithium-Ion-Brushless-Cordless/dp/B01IB4NALM

Hammer Drill

A hammer drill or impact drill is traditionally used for drilling in hard materials such as concrete, brick, and stone. Although some hammer drills are equipped with a setting that allows you to switch to a non-hammering mode, it is highly discouraged that you use it to drill into wood.  

Hammer drills can be a bit over on the pricey end when comparing with regular drills. They are also more substantial in mass when we talk about the ergonomics. But when it comes to its functionality, versatility, and durability, and depending on its brand, hammer drills are worth your penny.

We highly recommend the DeWalt DCD996P2 if you’re looking to getting the best quality hammer drill out there. This tool produces high-performance transmission for fast application speeds and improved run time. Its highly efficient brushless motors deliver up to 57 percent more run time over brushed motors. 

https://www.amazon.com/DEWALT-DCD996P2-Lithium-Brushless-3-Speed/dp/B01DR90NA2

Impact Driver

Impact drivers are mainly used for driving in screws that require a lot of torque. These tools are equipped with a hammering-like-mechanism that pushes forward its screw bit in the actual circular rotation of the chuck. More than just driving in screws, the impact driver also loosens up screws that may have been tightened up too much or have been stuck due to over-torque.

These drivers can pack a powerful punch and, in some instances, are capable of snapping screw bits off in half. If we compare this with a decent cordless drill that, let’s say, produces around 60Nm (Newton Meter, the unit for torque) force, then an impact driver will produce about 150Nm.

If you’re just starting out in the DIY world and are looking to getting your first impact driver. We highly recommend the DeWalt DCF885C1 impact driver. It’s affordable, it’s powerful, and it’s not complex at all to use.  Ergonomically speaking, it's quite compact, only taking up 5.55 inches, front to back, and is light-weighted with 2.8 pounds (excluding battery). You can get one for $99 at Home Depot or on Amazon.

https://www.amazon.com/DEWALT-DCF885C1-20V-Impact-Driver/dp/B01LBT3AZU

Facing a dilemma on which drill to buy? Why not borrow one instead of purchasing one brand new? Many DIY-ers collect a whole lot of tools and they’re prone to forgetting about the older ones they still have lying around their garage. My Garage Rentals gives them the opportunity to still make use of these tools by having them rented on the site. And you can rent them out yourself. While you’re still thinking on which drill to invest your money on, why not rent one for a day and for an affordable price? Rent a Hammer Drill today for only $30.00 per day. 

https://www.mygaragerentals.com/

[dpwheydepot-blog]

DP Whey Depot on Facebook

Call/Whatsapp us at wasap.my/60128168255 DP WHEY DEPOT is on Facebook. Users of Whey gained 21% more lean body mass.5 Whatsapp 0128168255 #DpWheyDepot ...

[normangazzetta-blog]

Ergonomic Chair Helps Office Workers Reset Their Posture

E-commerce website Best Kneeling Chairs recently published their in depth review of their favorite ergonomic office chairs and posture stools with a focus on helping office and home based workers who have to spend hours seemingly chained to their desks. The aim of Best Kneeling Chairs is to provide the most relevant and useful information to health conscious busy professionals who are looking for a better alternative to the standard office chair to pre-empt or reduce work related back and posture issues, so they may be more comfortable and more effective.

While it may seem unusual to some, Best Kneeling Chairs chooses to focus on helping people who spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. People are becoming more and more aware of the health concerns linked to prolonged and static seating, and often become restless and tense when they have to sit still all the time. Ergonomic and kneeling chairs can help by encouraging movement, keeping your core engaged and improving your posture.

While most other review sites simply list the positive selling points of ergonomic chairs, such as, for busy and active people who want all the benefits of better posture, improved circulation, and higher concentration levels despite having to have prolonged periods at their desk or computer. Instead of being tied to a rigid chair, a kneeling chair gently tilts your pelvis forward and encourages a natural, dynamic, aligned spine. This can help reduce pressure on your spinal discs and prevent additional strain on your neck, shoulders and back. Ultimately saving unnecessary time off work.

Some sites may go so far as to cover the more critical aspects as well, for example, the price is likely to be two, three or four times the cost of a standard, entry level, mass produced chair you would find at Ikea, Home Depot or Staples. This can have numerous knock on effects though because many people spend as many hours at their desk as they do sleeping! Consider whether you would want to knowingly sit on a chair sourced from the lowest cost provider that does not properly support your back for extended periods? An ergonomic chair actively encourages the user to sit with the right posture helping alleviate back and neck stress that all too often accumulate as a direct result of prolonged periods sitting at a desk on a daily basis.

Best Kneeling Chairs endeavours to go one step further in its mission to provide more options to people who have to spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. One example of a recent customer's feedback is found below.

“Been using this kneeling chair now for over a month and have fallen in love with it. Love the gentle rocking motion, and the active (hips forward, lower spine curved and supported) seating position. I can sit for longer and in more comfort than ever before at my desk.”

Best Kneeling Chairs got its start in 2016, founded by Kieron and Saskia Penrose. The idea for the site came about when the founders went looking for a solution for themselves initially, one that would ease their back ache and encourage the right supportive posture whilst working for prolonged hours at their computers. Having tried and tested many options over several months they set out sourcing affordable alternatives to the best designer chairs and kneeling stools that they personally found could really make a difference based on comfort, improved posture and reduced back problems.

Ever since, Best Kneeling Chairs website has made a point to provide better options and the best information to people who spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. So far this encompasses over one hundred pages of content, opinions and reviews.

Best Kneeling Chairs's complete and write up and review of ergonomic office chair and posture stool can be found at http://www.bestkneelingchair.eu/kneeling-chair

Contact Info: Name: Thomas Penrose Email: info@ErgoDesignEurope.com Organization: Ergo Design Europe Address: Kingsley Gardens, Cheltenham, Glos GL51 7TF, United Kingdom Phone: +44-7787-577256

For more information, please visit https://www.amazon.co.uk/Ergonomic-Kneeling-Computer-Promotes-Orthopedic/dp/B07236KZNW

Source: PressCable

Or for an example of Release ID: 349188, please click on http://www.kswo.com/story/38255549/ergonomic-chair-helps-office-workers-reset-their-posture

[caroliistew-blog]

Ergonomic Chair Helps Office Workers Reset Their Posture

E-commerce website Best Kneeling Chairs recently published their in depth review of their favorite ergonomic office chairs and posture stools with a focus on helping office and home based workers who have to spend hours seemingly chained to their desks. The aim of Best Kneeling Chairs is to provide the most relevant and useful information to health conscious busy professionals who are looking for a better alternative to the standard office chair to pre-empt or reduce work related back and posture issues, so they may be more comfortable and more effective.

While it may seem unusual to some, Best Kneeling Chairs chooses to focus on helping people who spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. People are becoming more and more aware of the health concerns linked to prolonged and static seating, and often become restless and tense when they have to sit still all the time. Ergonomic and kneeling chairs can help by encouraging movement, keeping your core engaged and improving your posture.

While most other review sites simply list the positive selling points of ergonomic chairs, such as, for busy and active people who want all the benefits of better posture, improved circulation, and higher concentration levels despite having to have prolonged periods at their desk or computer. Instead of being tied to a rigid chair, a kneeling chair gently tilts your pelvis forward and encourages a natural, dynamic, aligned spine. This can help reduce pressure on your spinal discs and prevent additional strain on your neck, shoulders and back. Ultimately saving unnecessary time off work.

Some sites may go so far as to cover the more critical aspects as well, for example, the price is likely to be two, three or four times the cost of a standard, entry level, mass produced chair you would find at Ikea, Home Depot or Staples. This can have numerous knock on effects though because many people spend as many hours at their desk as they do sleeping! Consider whether you would want to knowingly sit on a chair sourced from the lowest cost provider that does not properly support your back for extended periods? An ergonomic chair actively encourages the user to sit with the right posture helping alleviate back and neck stress that all too often accumulate as a direct result of prolonged periods sitting at a desk on a daily basis.

Best Kneeling Chairs endeavours to go one step further in its mission to provide more options to people who have to spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. One example of a recent customer's feedback is found below.

“Been using this kneeling chair now for over a month and have fallen in love with it. Love the gentle rocking motion, and the active (hips forward, lower spine curved and supported) seating position. I can sit for longer and in more comfort than ever before at my desk.”

Best Kneeling Chairs got its start in 2016, founded by Kieron and Saskia Penrose. The idea for the site came about when the founders went looking for a solution for themselves initially, one that would ease their back ache and encourage the right supportive posture whilst working for prolonged hours at their computers. Having tried and tested many options over several months they set out sourcing affordable alternatives to the best designer chairs and kneeling stools that they personally found could really make a difference based on comfort, improved posture and reduced back problems.

Ever since, Best Kneeling Chairs website has made a point to provide better options and the best information to people who spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. So far this encompasses over one hundred pages of content, opinions and reviews.

Best Kneeling Chairs's complete and write up and review of ergonomic office chair and posture stool can be found at http://www.bestkneelingchair.eu/kneeling-chair

Contact Info: Name: Thomas Penrose Email: info@ErgoDesignEurope.com Organization: Ergo Design Europe Address: Kingsley Gardens, Cheltenham, Glos GL51 7TF, United Kingdom Phone: +44-7787-577256

For more information, please visit https://www.amazon.co.uk/Ergonomic-Kneeling-Computer-Promotes-Orthopedic/dp/B07236KZNW

Source: PressCable

Or for an example of Release ID: 349188, please click on http://www.kswo.com/story/38255549/ergonomic-chair-helps-office-workers-reset-their-posture

[ellecarliit-blog]

Ergonomic Chair Helps Office Workers Reset Their Posture

E-commerce website Best Kneeling Chairs recently published their in depth review of their favorite ergonomic office chairs and posture stools with a focus on helping office and home based workers who have to spend hours seemingly chained to their desks. The aim of Best Kneeling Chairs is to provide the most relevant and useful information to health conscious busy professionals who are looking for a better alternative to the standard office chair to pre-empt or reduce work related back and posture issues, so they may be more comfortable and more effective.

While it may seem unusual to some, Best Kneeling Chairs chooses to focus on helping people who spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. People are becoming more and more aware of the health concerns linked to prolonged and static seating, and often become restless and tense when they have to sit still all the time. Ergonomic and kneeling chairs can help by encouraging movement, keeping your core engaged and improving your posture.

While most other review sites simply list the positive selling points of ergonomic chairs, such as, for busy and active people who want all the benefits of better posture, improved circulation, and higher concentration levels despite having to have prolonged periods at their desk or computer. Instead of being tied to a rigid chair, a kneeling chair gently tilts your pelvis forward and encourages a natural, dynamic, aligned spine. This can help reduce pressure on your spinal discs and prevent additional strain on your neck, shoulders and back. Ultimately saving unnecessary time off work.

Some sites may go so far as to cover the more critical aspects as well, for example, the price is likely to be two, three or four times the cost of a standard, entry level, mass produced chair you would find at Ikea, Home Depot or Staples. This can have numerous knock on effects though because many people spend as many hours at their desk as they do sleeping! Consider whether you would want to knowingly sit on a chair sourced from the lowest cost provider that does not properly support your back for extended periods? An ergonomic chair actively encourages the user to sit with the right posture helping alleviate back and neck stress that all too often accumulate as a direct result of prolonged periods sitting at a desk on a daily basis.

Best Kneeling Chairs endeavours to go one step further in its mission to provide more options to people who have to spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. One example of a recent customer's feedback is found below.

“Been using this kneeling chair now for over a month and have fallen in love with it. Love the gentle rocking motion, and the active (hips forward, lower spine curved and supported) seating position. I can sit for longer and in more comfort than ever before at my desk.”

Best Kneeling Chairs got its start in 2016, founded by Kieron and Saskia Penrose. The idea for the site came about when the founders went looking for a solution for themselves initially, one that would ease their back ache and encourage the right supportive posture whilst working for prolonged hours at their computers. Having tried and tested many options over several months they set out sourcing affordable alternatives to the best designer chairs and kneeling stools that they personally found could really make a difference based on comfort, improved posture and reduced back problems.

Ever since, Best Kneeling Chairs website has made a point to provide better options and the best information to people who spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. So far this encompasses over one hundred pages of content, opinions and reviews.

Best Kneeling Chairs's complete and write up and review of ergonomic office chair and posture stool can be found at http://www.bestkneelingchair.eu/kneeling-chair

Contact Info: Name: Thomas Penrose Email: info@ErgoDesignEurope.com Organization: Ergo Design Europe Address: Kingsley Gardens, Cheltenham, Glos GL51 7TF, United Kingdom Phone: +44-7787-577256

For more information, please visit https://www.amazon.co.uk/Ergonomic-Kneeling-Computer-Promotes-Orthopedic/dp/B07236KZNW

Source: PressCable

Or for an example of Release ID: 349188, please click on http://www.kswo.com/story/38255549/ergonomic-chair-helps-office-workers-reset-their-posture

[domifiisch-blog]

Ergonomic Chair Helps Office Workers Reset Their Posture

E-commerce website Best Kneeling Chairs recently published their in depth review of their favorite ergonomic office chairs and posture stools with a focus on helping office and home based workers who have to spend hours seemingly chained to their desks. The aim of Best Kneeling Chairs is to provide the most relevant and useful information to health conscious busy professionals who are looking for a better alternative to the standard office chair to pre-empt or reduce work related back and posture issues, so they may be more comfortable and more effective.

While it may seem unusual to some, Best Kneeling Chairs chooses to focus on helping people who spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. People are becoming more and more aware of the health concerns linked to prolonged and static seating, and often become restless and tense when they have to sit still all the time. Ergonomic and kneeling chairs can help by encouraging movement, keeping your core engaged and improving your posture.

While most other review sites simply list the positive selling points of ergonomic chairs, such as, for busy and active people who want all the benefits of better posture, improved circulation, and higher concentration levels despite having to have prolonged periods at their desk or computer. Instead of being tied to a rigid chair, a kneeling chair gently tilts your pelvis forward and encourages a natural, dynamic, aligned spine. This can help reduce pressure on your spinal discs and prevent additional strain on your neck, shoulders and back. Ultimately saving unnecessary time off work.

Some sites may go so far as to cover the more critical aspects as well, for example, the price is likely to be two, three or four times the cost of a standard, entry level, mass produced chair you would find at Ikea, Home Depot or Staples. This can have numerous knock on effects though because many people spend as many hours at their desk as they do sleeping! Consider whether you would want to knowingly sit on a chair sourced from the lowest cost provider that does not properly support your back for extended periods? An ergonomic chair actively encourages the user to sit with the right posture helping alleviate back and neck stress that all too often accumulate as a direct result of prolonged periods sitting at a desk on a daily basis.

Best Kneeling Chairs endeavours to go one step further in its mission to provide more options to people who have to spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. One example of a recent customer's feedback is found below.

“Been using this kneeling chair now for over a month and have fallen in love with it. Love the gentle rocking motion, and the active (hips forward, lower spine curved and supported) seating position. I can sit for longer and in more comfort than ever before at my desk.”

Best Kneeling Chairs got its start in 2016, founded by Kieron and Saskia Penrose. The idea for the site came about when the founders went looking for a solution for themselves initially, one that would ease their back ache and encourage the right supportive posture whilst working for prolonged hours at their computers. Having tried and tested many options over several months they set out sourcing affordable alternatives to the best designer chairs and kneeling stools that they personally found could really make a difference based on comfort, improved posture and reduced back problems.

Ever since, Best Kneeling Chairs website has made a point to provide better options and the best information to people who spend hours working at a desk or computer who often get back, neck or shoulder ache, or who find themselves slumped over their desks, sitting with bad posture and want an easy and effective remedy to help them be more productive. So far this encompasses over one hundred pages of content, opinions and reviews.

Best Kneeling Chairs's complete and write up and review of ergonomic office chair and posture stool can be found at http://www.bestkneelingchair.eu/kneeling-chair

Contact Info: Name: Thomas Penrose Email: info@ErgoDesignEurope.com Organization: Ergo Design Europe Address: Kingsley Gardens, Cheltenham, Glos GL51 7TF, United Kingdom Phone: +44-7787-577256

For more information, please visit https://www.amazon.co.uk/Ergonomic-Kneeling-Computer-Promotes-Orthopedic/dp/B07236KZNW

Source: PressCable

Or for an example of Release ID: 349188, please click on http://www.kswo.com/story/38255549/ergonomic-chair-helps-office-workers-reset-their-posture

[silasjburke-blog]

Time for a little reflection

So I've been living in Vancouver for over a month now. What have I learnt so far? Well firstly, I have learnt that high living conditions are totally overrated and you really can get used to anything if you're stuck with it. I currently pay: $240 a month on rent, $200 a month on food and the rest of my money is spent on various travelers expenses. To further explain, travelers expenses is an umbrella term for non-essential purchases e.g. excursions, lift passes, and of course the main drain on my finances which is alcohol. So basically, put simply, those of us living in our hostel are currently kicking the world's 3rd most expensive city's ass.

Next question, what have I been doing with my time? I like to do urban exploring, and of course this is simply a fancy term for wandering around the city for free and people watching. Part of my North American experience is to assimilate the culture and learn from it. Wandering around the city, talking to strangers, grabbing coffee; all of these experiences contain subtle differences to the UK and hence provide an opportunity for learning and study. For example the way that coffee is ordered in Canada bears no resemblance to the UK. Even the most assertive Brit will "uhh" and "hmm" at least twice whilst placing their coffee order, the process will also be filled with at least 3 pleases. At what point does the British use of please move from politeness to mere time filling. The average Canadian order reads " Yeah, can I get a large double-double and a four cheese bagel with cream cheese. Thanks". Now the assessment of this statement, in my personal opinion both ways of ordering coffee are equally polite and the Canadian style is simply more efficient. As our imperial cousins, it may be noted that Canadians share our incessant need to apologise and also place a key emphasis on the use of manners. I really must admit, the similarities between the two nations are truly clear to behold and I believe that it has made my North American transition a comfortable and easy one.

As expected  I have been continuing to snowboard on the beautiful B.C. mountains. I recently checked out Seymour, Seymour is a smaller mountain than Grouse and the runs last an average of 10-15 minutes. However, the park facilities at Seymour are superior to Grouse and provide more room for experimenting. It was the subtle features of Seymour which impressed me with the clever creation of side-kickers and well built compression jumps. I checked out Seymour with a couple of friends and it was a really great day. I have some pictures from the day but am currently working on getting them up onto the blog. I must add that with all the blogs previously written, I will edit them and insert pictures.

What else? Well, My roommate recently bought the van for his road-trip and we are beginning to do it up in preparation. Although I will not be joining his trip, I am enjoying the experience of the journey. We spent a couple of days dealing with the species of second hand car salesman which is always a joyful experience and provided us with plenty of entertainment. The end product was a 2001 GMC Safari family van which is filled with plenty of possibilities. The next step has taken us to many of the fabled North American super-marts. First stop was Wal-Mart, then Home Depot and then the compulsory browse of IKEA. Wal-Mart may well be my favourite place on Earth, maybe it is my love of things that are completely alien to me or maybe it is my love of efficiency. Although I understand the effect that Wal-Mart had on small businesses in the United States, there is a small part of me that really likes the way in which you can find everything you could possibly need in a single store. It is the ultimate metaphor for an efficient shop. Of course, being a political science major I need to talk about Wal-Mart ;). You see, Wal-Mart and its beginnings are a true metaphor of the American psyche. Wal-Mart was founded by Sam Walton in the Southern state of Arkansas and the basic idea was genius. You simply bulk buy a variety of goods, build warehouse-like stores in small towns and keep prices low. However, the store that represented the American dream for this one man helped to destroy the American dream for thousands of others. As discussed in the fantastic book 'The Unwinding' by George Packer, A single Wal-Mart's ability to become the major shopping destination for up to 130 small towns destroys the market for up to 300 small businesses in each town. Think about that, that's 39,000 small businesses put out of business by a major corporation like Wal-Mart. Now here is where it gets complicated, the Republicans may link the destruction of small businesses to the high taxes placed on them by the Democratic government. They state that the high level of tax placed on small business owners removes their ability to compete with big multi-nationals. But the Democrats will argue that the destruction of small business is caused by the lack of the restriction and taxation placed on large multi-national corporations like Wal-Mart. The lack of regulation on large corporations can be seen to lead to mass development of areas i.e. the building of Wal-Marts without consideration of the effect on local businesses. Hence, the blame game continues and this destruction of small businesses can be seen as a key cause of the apathy and anger felt by Middle-America.

Now I've tried to be objective up to this point but I would like to point something out, I feel that the irony is louder than anything I have ever heard. A president elected by 'the unhappy middle' represents the party and the movement which put them where they are. Major corporations like 'Trump', the de-regulation of financial markets and the irresponsible development of property are the cause of the 2008 financial crash and hence are the reason that the U.S. is currently rebuilding and is currently halfway through the process of creating jobs. Why on Earth would the unhappy elect the reason for their unhappiness to make them happy. Personally, I feel that electing Trump is the political equivalent of asking your school bully to help you with your self-esteem issues. Just mull that one over.

 See you soon, Silas

 Link to the unwinding(Buy it)

https://www.amazon.co.uk/Unwinding-Inner-History-New-America/dp/0571251285

[raymondchougaming]

Going Mech in TvP...Some Ideas

Although my skill level is nowhere near high enough (in terms of execution) for this, I am going to throw out how I plan on going about this, evaluate some factors, and then propose a few solutions.

First of all, the big question: is there even a point in going mech right now? MMMM + Tank + liberator and maybe a few ghosts is so strong right now that there is actually no point in going mech.

It’s not necessary at all! But I feel as though it should be explored, because this could potentially unveil a family of strategies similar to 2009-2010 SK Telecom T1 Terran Builds - Fake Mech builds (iLoveOov comes to mind), or Flash-style tech switches. This will be interesting if Mech somehow becomes an established part of the meta, and the Protoss responses are DRASTICALLY different...all of a sudden we’ve opened up a bunch of new possibilities.

That being said, Starcraft 2 strategies are being developed with all of the history of Brood War and HotS and WoL behind them, so perhaps we have reached a point where that style of strategy is just not possible.

But first, let’s list our goal with mech. What is the whole purpose of going Mech?

In Brood War, Terrans went mech for a few reasons:

1. Reavers 2. High Templar 3. Bad pathfinding and chokes on maps led to inability to quick dodge storms 4. Reavers 5. Healing in Brood War was not as readily available 6. Stutter stepping was not very good 7. EMPs were VERY hard to get...since vessels were expensive in gas, took forever to build, and you needed that gas for the rest of your army. Oh, did I also mention that you have to research them, most likely get the Vessel energy upgrade, and then wait for the energy on your vessels to build up? Oh yeah, let’s not forget that the bulk of their army is DRAGOONS, which kill a vessel like instantly. Vessels couldn’t cloak, and unless you were REALLY good with them, you most likely got feedbacked if you tried to EMP templar.

In other words, why Bio didn’t work in Brood War. But wait a minute...a lot of those same constraints hold true in Legacy of the Void as well! It’s just that the numbers stack up a bit differently.

First cold, hard truth.

At the end of the day, if the numbers don’t work out, the strategy WILL not work. This was a truth I refused to accept back in 2011-2012, but I am ready to embrace it now.

At the end of the day, both players have a number above their heads - total value, and everything they try to do is to just try to have their numbers “collide” at the crucial moment when their number is higher than their opponents. Everything you do seeks to increase that number. Building units, getting more bases, etc...but even more subtle things such as holding your mouse properly or eye placement. Proper eye placement makes you more effective in game, adding to your “total.” 

So my study of the matchups will consist of a few “phases.”

1. Computing the possible “value” of the other player at any given point in time. This will take extensive analysis.

2. Maximizing my value. Notice that the previous post, dedicated to multitasking, indirectly increased the effectiveness of all of my in game resources.

***Do note that all values are relative to both players, the map in question, their interactions, and numerous other environmental/situational factors

Well, first of all, let us state a goal with Mech. What is the point of mech? Unless there is sufficient justification, there is no reason for any pro player to switch. I am exploring mainly for curiosity.

-Do drops? Bio drops are CRAZY effective and can snipe buildings like no other. Hellion drops are crazy though, but you don’t have the same building sniping capability. -Keep Protoss at home? Well, bio does that quite well. -Take expansions aggressively? Bio does that VERY well. What will most likely end up happening as mech is that you have to sacrifice expansions strategically. Or build a bunch of static defense.

-Mech armies should be able to engage Protoss armies directly, and then crush them while suffering very little loss. That has traditionally been the case in Starcraft 2...and if that is the case, then going mech puts a timer on Protoss to win...or puts indirect “pressure” on Protoss by necessitating them to tech to Tempests or Carriers + Void Rays and achieve critical mass. Assuming, that is, that Terran doesn’t just die to blink stalker harass, which we will discuss shortly.

So let us state our goal, and then we will work on achieving it.

The goal is to create an untouchable army, and then slowly advance towards Protoss to simply kill them outright, whilst slowly whittling them down by dealing economic damage. The goal is to kill them before the air transition that Protoss will make, or make the transition to Sky Terran before they get critical mass of air. The presence of this mech army puts a timer on Protoss to force them to invest significant resources in mobile armies, such as Blink Stalkers, and if we are able to resist, then we can kill them, or significantly maim them, during the timing attack (most likely a max push).

In many instances, this can result in a base race, which Terran will win because Terran buildings fly and Hellions are fast.

First, let’s list all of the Protoss combat units:

Zealots, stalkers, adepts, sentries, HT, DT, obs, Warp Prism, Colossus, immortals, disruptors, mothership core, mothership, stasis, oracle, voidray, phoenix, carrier, tempest (and probe)

A critical mass of tanks will destroy just about everything. Terrans even have the added advantage of having the Thor meatshields, and cyclones seem like a good unit (will test). Hellbats look pretty good...

So the unit composition I am thinking of is:

-Critical mass of tanks -A few thors and cyclones for support -A SHIT TON of hellions and mines running all over the place in the midgame, but this number will be dropped later on in favor of more thors and tanks -Perhaps a few marauders if absolutely necessary -GHOSTS. Critical for this composition. Ties in nicely with Marauders -A squadron of a few Vikings, a Raven, and like 4-8 banshees roaming around the map

For the midgame, the idea is to roam around key spots of the map with the air, snipe the observer with the Vikings (it takes 2 shots), and then send the banshees in cloaked to pick off things. A key component of this strategy is hunting down the observers, and constantly deny Protoss vision. Also, we will be laying down mines in certain key paths, and since we’re killing observers, this will slow down any sort of thing Protoss can do to harass us.

I would like to have 2 Factories with reactors pumping out oodles and oodles of Hellions and Mines. I would like to run hellions into mineral lines and wreak havoc, put mines in cool places, just anything I can do to mess with Protoss and keep them at home while I prepare for the death push. 

Randomly placed missile turrets would be a nice touch, and buildings will be very important. Structure Armor is CRITICAL, and Hi-Sec Auto-Tracking may be good, since we will be getting a few Planetaries. Sim-city will be very important.

The ideal engagement goes like this: We set up our army in an advantageous position that cuts his bases in half. Tanks sieged, thors near the front-center, hellions/hellbats and cyclones in the front, a brief mine field, and then a few Barracks as DPS soakers/movement constrictors, and turrets peppered everywhere, with the air squad floating around. This is a very high APM strategy.

They cannot attack directly into it. This will most likely trigger a base race, which you are guaranteed to win.

I’ll figure out the opener and think about it some other time.

So a few contingencies: Protoss will most likely, once they spot you going for Mech, transition into some sort of super mobile army, most likely one containing a lot of Blink Stalkers. To deal with this, a lot of planetary fortresses are necessary, with like 1 tank (2 max) at each expansion. Maybe a mine or two at the bottom of a ramp leading to each expansion. Mines cannot be used as liberally as they were in Brood War, since they’re free and cost 2 supply. So perhaps we’ll have a mine in this one key path, but once I spot (most likely with a sensor tower) that he’s going for a blink-in, I’ll move the mine around. The airsquad can serve as cleanup, and I can pull a bit of my army back. If he really commits a lot of stalkers - stalkers are expensive! I’ll just go in there and kill him if that’s the case.

I’ll start jamming blink-able cliffs with a ton of buildings and turrets. The turrets to kill the observer, and buildings (such as raised depots) to deny the Protoss space to blink in. If they do shoot at a building, that still buys me time to get over there. I’ll just fly over there with airsquad and kill everything. Also, PDD is pretty good.

If at any point I scout the mass Stargate transition, I immediately begin the death push. If he is not quite kill-able, then I begin the mass Starport transition. Though I do need to learn if Sky Terran can beat mass tempest/carrier/voidray. 

I’ll try a few of these in unranked and see how it goes.

[binabadandotcom]

Get your Muscles💪 Pumping with NEW Mass Depot❗ 80g Protein, 80g Amino Acids and 18g BCAA All Naturally Occurring 💪. Grab DP Mass Depot 7.5LB (3.4KG) and Get FREE GIFT 🎁 Today at Only 🟢 RM150.00

✅ Dutch Chocolate

✅ Mocha Latte

✅ Vanilla

Buy Here 🛒 https://binabadan.com/

Beli Melalui ➡️ Whatsapp 📲 0178758752

🚀 Free & Fast Shipping

💢 Made in USA

💢 Top Rated 🏅🏅🏅🏅 🏅

[binabadandotcom]

Shop 🛒 Today the DP Mass Depot 7.5LB (3.4KG) With FREE GIFT🎁 at Only 🟢 RM150.00

Available Flavours 💢

✅ Dutch Chocolate

✅ Mocha Latte

✅ Vanilla

Shop Now 🛒 https://binabadan.com/

Beli Melalui ➡️ Whatsapp 📲 0178758752

🚀 Free & Fast Shipping

💢 Made in USA

💢 Top Rated 🏅🏅🏅🏅 🏅

[binabadandotcom]

Mass Depot 2.2lb WHOLESALE. Looking to gain weight? Buy Mass Depot 30lb top-quality weight gainer protein powder. Enjoy irresistible Chocolate, and Vanilla. Mass Gainer terbaik di Malaysia.