#duct cleaning rochester ny

[onthespotcleanersblog]

How Often Should You Get Duct Cleaning in Rochester, NY?

Air ducts play a crucial role in your home’s air quality and overall efficiency, especially in areas like Rochester, NY, where weather conditions can be extreme. But how often should you get them cleaned? We’ll delve into the factors that influence duct cleaning frequency, why it’s essential, and how to know when it’s time for maintenance.

Why Duct Cleaning is Essential for Your Home

Air ducts serve as the respiratory system of your home, circulating warm and cool air throughout your living spaces. Over time, these ducts can accumulate dust, allergens, and other debris, impacting both air quality and HVAC system efficiency. Regular duct cleaning not only helps maintain a cleaner living environment but also extends the life of your HVAC system.

In Rochester, NY, where seasonal changes can range from hot, humid summers to freezing winters, having clean ducts becomes even more vital. Poor indoor air quality can aggravate allergies, asthma, and other respiratory conditions. Regular cleaning helps to eliminate these risks, ensuring that your family breathes fresh, clean air year-round.

How Often Should You Get Your Ducts Cleaned?

While the frequency of duct cleaning depends on several factors, the National Air Duct Cleaners Association (NADCA) recommends having your ducts cleaned every 3 to 5 years. However, this timeline can change based on specific conditions in your household or environment.

Here are some scenarios where you may need more frequent cleaning:

Pets in the home: If you have furry friends, their hair and dander can easily get trapped in the ducts, requiring more frequent cleaning.

Allergies or asthma: If anyone in your household suffers from allergies or asthma, more regular cleaning (every 2 to 3 years) may be necessary to improve air quality.

Recent renovations: If you’ve recently remodeled or renovated your home, dust and debris can infiltrate your ducts, necessitating a cleaning soon after.

Visible mold or mildew: If you notice signs of mold growth inside your ducts, immediate cleaning is essential for health reasons.

Unpleasant odors: If your home has persistent odors, it could be a sign that contaminants are trapped in the ducts, and cleaning is necessary.

Signs That Your Ducts Need Immediate Cleaning

Sometimes, waiting for the standard cleaning interval isn’t enough. If you notice any of the following signs, it’s time to schedule a duct cleaning as soon as possible:

1. Dusty Air Vents

When dust builds up around your air vents or on surfaces around your home, even after cleaning, this could indicate that your ducts are circulating dust and debris.

2. Unexplained Increase in Energy Bills

A sudden spike in your utility bills could be due to your HVAC system working harder to circulate air through clogged ducts. Cleaner ducts allow the system to run more efficiently, reducing energy consumption.

3. Poor Airflow

If certain rooms in your home seem to have less airflow than others, it could be due to blockages in your ducts. Cleaning the ducts can restore proper airflow and improve overall comfort.

4. Allergy Flare-Ups

If you or someone in your home is experiencing more frequent or severe allergy symptoms, your dirty air ducts might be circulating allergens like dust mites, pollen, or pet dander.

5. Persistent Musty Odors

A musty or stale smell could indicate the presence of mold or mildew inside your ductwork. Mold spores can spread through the air, posing serious health risks. A professional cleaning can eliminate this problem.

The Importance of Professional Duct Cleaning

Though it might be tempting to clean your ducts on your own, professional duct cleaning services are essential to ensure a thorough job. Trained professionals use specialized equipment to reach deep into your duct system, removing dust, debris, and contaminants that standard home cleaning tools can’t reach.

Health Benefits of Duct Cleaning

Reduction of Allergens: Dust, pet dander, and pollen can easily build up in your ducts. Regular cleaning minimizes these contaminants and helps reduce allergy symptoms.

Mold Prevention: Moisture buildup in your duct system can lead to mold growth. Professional cleaning helps to remove mold spores and prevent further growth.

Odor Elimination: Musty odors caused by mold, mildew, or other contaminants in your ducts can linger in your home. Duct cleaning eliminates the source of these unpleasant smells.

Energy Efficiency

A clean duct system allows air to flow freely, reducing the amount of work your HVAC system needs to do. This can result in lower energy bills and a longer lifespan for your heating and cooling equipment. In a place like Rochester, NY, where HVAC systems are used heavily throughout the year, the energy savings can be significant.

DIY vs. Professional Duct Cleaning: What’s the Difference?

You may wonder if DIY duct cleaning is a viable option. While there are some steps you can take to maintain cleaner ducts, such as regularly changing your air filters and vacuuming vent covers, DIY methods cannot compare to the thoroughness of a professional service.

DIY Cleaning: This can help maintain cleanliness in between professional cleanings but won’t remove deeply embedded dirt and contaminants.

Professional Cleaning: Certified technicians use high-powered vacuums, brushes, and blowers to reach every part of your duct system, ensuring a comprehensive clean. They also inspect for any issues such as leaks, blockages, or mold growth.

Choosing the Right Duct Cleaning Service in Rochester, NY

When selecting a professional duct cleaning company, there are a few factors to keep in mind:

Certifications: Look for companies that are NADCA certified. This ensures they follow industry standards and use proper cleaning techniques.

Experience: Choose a company with years of experience in the industry, as this typically means better quality service.

Customer Reviews: Check online reviews and testimonials to ensure the company has a solid reputation for customer satisfaction.

Pricing: While price is important, remember that the cheapest option isn’t always the best. Look for a company that provides a balance of quality service and fair pricing.

Conclusion: Keep Your Air Clean and Your HVAC Efficient

In Rochester, NY, duct cleaning is essential for maintaining good air quality and ensuring your HVAC system runs efficiently year-round. While general guidelines suggest cleaning every 3 to 5 years, factors such as pet ownership, allergies, and recent home renovations can affect how often you need this service. Keep an eye out for signs like increased dust, musty odors, and rising energy bills, as these could indicate your ducts are overdue for a cleaning.

[onthespotcleanersinc]

 Mold is a significant issue in homes and businesses. If you believe you have a mold problem, you must immediately act. Many individuals employ a mold remediation firm to remove and repair their property. Contact On The Spot Cleaners if you want mold removal in Rochester, New York. But, before you choose mold cleanup services, there are crucial details you must consider.

[acleanerimagerochester-blog]

Mold Removal Rochester NY

[air-duct-cleaning-rochester]

Duct Cleaning Rochester NY

Our specialty is air quality, and we believe that seeing is believing. All of our customers receive before and after pictures of their ducts, so they know that their duct system is clean and sanitized. www.qasny.com

[advancedhoodsolutions]

Experience excellence in kitchen maintenance with Advanced Hood Cleaning Solutions, proudly serving Livonia, NY, Buffalo, NY, and Rochester, NY. From comprehensive kitchen hood cleaning to specialized fire suppression services, pressure washing, and meticulous air duct cleaning, our Livonia-based office guarantees prompt and efficient solutions. Trust our skilled team to elevate your kitchen's cleanliness and safety standards, creating a healthier environment for your establishment. Wherever you are in Livonia, Buffalo, or Rochester, our commitment to exceptional service remains unwavering, setting us apart as the go-to provider for all your kitchen maintenance needs.

Address: 7358 Richmond Mills Rd, Livonia, NY, 14487 Phone: +1 585-991-8750

Website: https://advancedhoodsolutions.com/

[simondsilva1203]

Expert Vent Cleaning Services in Niagara Falls NY - Pure AirCare Duct Cleaning Specialists for top-notch vent cleaning in Niagara Falls, NY. Their skilled professionals ensure a thorough cleaning of your HVAC system, promoting healthier indoor air quality. Trust Pure AirCare for a fresh, clean, and comfortable living environment. For more information, visit Pureaircareusa.com.

[a-cleaner-image]

The Top Five Benefits of Air Duct Cleaning

The air duct is a very important function of your home. They circulate the air from your heating and cooling system into and out of each room, which allows for consistent interior comfort regardless of the season.

BENEFITS OF AIR-DUCT CLEANING:

1.Increases efficiency and productivity of the HVAC system 2.Less costly repairs with routine cleaning 3.Reduce allergens and irritants 4.Reduce unpleasant odors 5.Reduce illness and respiratory issues

It is very important to hire a company with plenty of experience to clean your air ducts so that there is no damage to your HVAC system. At A Cleaner Image we offer professional air duct cleaning in Rochester NY. Give us a call today at 585-377-1960.

[homewizguy-blog]

Water Damage Restoration Service Providers & Me Part - 2

Hey guys, this is Home Wiz Guy here. Welcome to another part of water damage restoration service providers & me. Hope you guys read my previous part. In my last part I talked about how to choose a water damage restoration companies very briefly and also shared some of my well known companies for water damage restoration services. In this part I will try to share some very brief information about the processes of water damage restoration.

What goes under water restoration?

To make your home or commercial space like before or pre-damage condition involves so many things. But in short I can say water removal, decontamination and drying.

You need to act as fast as possible in case of water damage. Standing water & moisture provide bacteria and mold a perfect environment. this type of environment can lead to allergic reactions and even disease. So quickly water removing is one of the most important thing that need to take care after the damage.

Your home or commercial space may need to be rebuilt. Drywall and carpet absorbed water and often develop bacteria and mold. So those need to be replaced. Here is a short list those need to be replaced after the water damage.

Walls

Floors

Shelves

Clothing

Drapery

Duct-work

Heating & AC systems

Process for Water Damage Restoration

There are few steps for water damage restoration. Those steps are

Step 1 : Inspection — Companies will start your water damage restoration with inspection of damaged area. This inspection determine the class and category of water damage. There are 4 classes and 4 categories of water damage. I will explain those in separate article.

Step 2 : Water Removal — After the inspection companies will start water removal process. This process includes different types of equipment like pumps and vacuums.

Step 3 : Drying — After water removal it is time to dry and dehumidification. To remove the remaining moisture it is very important process.

Step 4 : Cleaning — If the water removal and drying process is done, then it is the right time to start the cleaning step. It is important to prevent unwanted mold and bacteria. Carpets, clothing and drapery need attention here. I know some really good and well reputed companies for cleaning service. I will create a separate post for them too.

Step 5 : Restoration — Finally it is time for the restoration. This is the biggest process of all the steps. This restoration involves the replacing and insulation. This process is depending on the class and categories of water damage.

So these are the steps of water damage restoration in brief. Hope you have a clear idea about the restoration process.

Water Damage Restoration Companies I know

As I told you guys that I am working for a web development and marketing agency, I know lots of companies as they are our clients. Here is short list of them who provide water damage restoration service and I know they carefully fulfill the checklist to choosing a company that I share in my last article. So here they are

Dalworth Restoration - Water Damage Restoration in Dallas/Fort Worth

Dreyer's DKI - Water damage Restoration in Gainsville & Lake City, FL

Protek Restoration - Water Damage Restoration in Montgomery, AL

American Restoration Disaster Specialists - Water Damage Restoration in Shelby, Lincolnton, Gastonia & Surrounding Areas

Northeast Power Dry - Water Damage Restoration in Bridgewater, Bound Brook & throughout NJ

Next Level Restoration Group - Water Damage Restoration from Coast to Coast

Rapid Dry - Water Damage Restoration in Rochester and Buffalo, NY

Hope this list will help you when you are in crisis and in those areas. I know they are good and fulfill the choosing criteria but I highly suggest you to check by yourself before hiring them.

So guys, this is the end of water damage restoration. Hope this 2 parts help you to know the check list and steps. I also hole that next time when you need restoration service my articles will help you.

Please let me know if you have any suggestions. I will update my articles according to your feedback.

Stay safe and Thanks.

[manuelclapid]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

from Home https://www.askthebuilder.com/why-your-house-is-cold-and-stop-patio-algae-and-moss/ via http://www.rssmix.com/

[thegregorybruce]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

from Home https://www.askthebuilder.com/why-your-house-is-cold-and-stop-patio-algae-and-moss/ via http://www.rssmix.com/

[allardjeremyballard]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

from RSSMix.com Mix ID 8247360 https://www.askthebuilder.com/why-your-house-is-cold-and-stop-patio-algae-and-moss/ via http://www.rssmix.com/

[onthespotcleanersinc]

The On The Spot Guide To Cleaning Dust

No matter where or how you live, dust will make itself at home in your house. Some household members may experience it more viscerally, with eyes red and watery, and sleepless nights punctuated by incessant sneezing and congestion. You may live in farm country, where at certain times of the year, extra layers of dust appear on every surface. There are actions you can take and services you can hire out to significantly lessen dust for a healthier and more comfortable for everyone. Randy Spurling, Carpet Cleaner and owner of On The Spot Cleaners, has the ultimate dust cleaning guide for you read more. 

[acleanerimagerochester-blog]

Mold Removal Rochester NY

[air-duct-cleaning-rochester]

Duct Cleaning Rochester NY | Quality Air Specialists

Quality Air Specialists is the premier air duct cleaning company that provides professional air duct cleaning, dryer vent cleaning, and air purification services in Webster NY. We are business and home air quality specialists who make your air ducts cleaner, safer and more efficient. We have been providing exceptional service for over 15 years in Webster, Penfield, and Rochester NY! Call us today for a free estimate! https://www.qasny.com

[advancedhoodsolutions]

Advanced Hood Cleaning Solutions

At the heart of Livonia, NY, Advanced Hood Cleaning Solutions stands as the beacon of excellence in kitchen maintenance. Our comprehensive services, including kitchen hood cleaning, fire suppression expertise, pressure washing, and air duct cleaning, ensure a spotless and secure culinary environment. Serving Buffalo, NY, and Rochester, NY, our centrally located office allows us to respond promptly to your needs. Trust our skilled team to elevate your kitchen's cleanliness and safety standards, setting the benchmark for professional maintenance services in the region.

Address: 7358 Richmond Mills Rd, Livonia, NY, 14487

Phone: 585-991-8750

Website: https://advancedhoodsolutions.com/

[andrewmawby]

Why Your House is Cold and Stop Patio Algae and Moss

Main heating supply ducts need to get smaller the farther away they are from the furnace. Note how the large duct on the left narrows down. (C) Copyright 2018 Tim Carter

Why Your House Is Cold

Question #1: Tim, I’ve got a forced-air furnace. Several rooms in my house are cold in the winter and are hot and stuffy in the summer when the AC is on. Most of the rooms are comfortable. Why do you think this is the case? What can be done to fix it and if I build a new home how can I prevent it? Kelly S., Rochester, NY

Do you have the same heating and cooling problems that Kelly has? I know many do based on the number of people who email me each week when it gets cold and hot!

There are several possible reasons why a few rooms in your home might not be as comfortable as others. Let’s assume that the vent covers in the rooms are wide open, the damper controls in the branch ducts are wide open and there are no stuffed animals being held prisoners down in the ducts.

It’s important to realize that furnaces and AC units are like shoes and clothes. They are matched to the heating and cooling requirements of your home. If you buy shoes that are too small, you bet you’ll be uncomfortable. A professional heating and cooling contractor will do calculations that tell him exactly how many cubic feet per minute of conditioned air must go into each room to keep you comfortable.

The supply air duct system in your home needs to mimic the blood vessels in your body. The reason your blood pressure is the same throughout your entire body, even at your fingertip, is because the blood vessels get smaller and smaller the farther away they are from your heart.

Your main supply duct needs to do the same or otherwise, there’s not enough energy in the remaining forced air to push into the rooms at the far end of your home. If your basement is unfinished, look at your main supply duct to see if it gets smaller as branch ducts go off towards the other rooms that are comfortable.

You might be able to fix your existing supply ducts with relative ease if they’re accessible. The first step in the process is to have a contractor do the calculations to see if enough air is getting to each room. There are online help aids if you want to do this yourself. Look for a Manual J guidebook should you want to attempt to do all the calculations.

The second step is to make sure your furnace or AC units are indeed the correct sizes. A professional contractor will probably have to assist you with this. If your furnace and AC unit are sized properly, then make sure your main supply duct does get smaller and smaller. If it doesn’t, then you’ll have to modify it.

Stop Patio Algae and Moss

Question #2: Mr. Tim, can you help me? I’m in a constant battle fighting mold, mildew, and algae on my outdoor patio and sidewalks. I’m tired of scrubbing them. Is there some magic liquid I can spray on the concrete and paver brick? David L., Orlando, FL

I don’t know about you, but I have the same problem as David. On the north side of my home, I’ve got a paver stone pad outside a door from my garage. It constantly has slippery green algae I have to clean off, well I used to clean it!

Mold, mildew, algae, and who-knows-what likes to grow where they can get abundant food and moisture. Shaded patios and sidewalks can be prime candidates. These organisms will grow on vertical surfaces too such as siding and brick.

I decided to solve the problem using technology from shipbuilders of old. Go back more than 200 years and the shipbuilders used thin copper plating on the hulls of sailing ships to prevent the growth of barnacles that would create drag and slow down the ships.

Copper is a natural, safe biocide. As with most things you don’t want too much as it can cause problems. I’ve discovered a safe way to put copper on my pavers so it doesn’t leach into the pure water of the lake I live on here in New Hampshire.

I mix up about 1.75 pounds of blue copper sulfate crystals with a gallon of hot water. The crystals dissolve very fast as you stir them. I then put this solution in a standard hand-pump sprayer and apply a fine mist of the liquid just on the pavers and concrete.

I’m careful to make sure I don’t have any get in the grass and I only put on enough so it doesn’t puddle. You’ll discover it almost always soaks into the masonry in a few minutes.

After it dries, I apply more. I do this about three or four times so the copper soaks down into the surface of the masonry. The surface of the concrete does end up with a blueish color, but the color fades away in a week or two. The best part is I don’t have any algae, mold or mildew problems and neither will you!

The post Why Your House is Cold and Stop Patio Algae and Moss appeared first on Ask the Builder.

from builders feed https://www.askthebuilder.com/why-your-house-is-cold-and-stop-patio-algae-and-moss/ via http://www.rssmix.com/