#howtoinstallpvccolumnwrap

[echonbuildingproduct]

Tips on how to install PVC column wrap without any trouble?

Industrial and residential buildings rely on columns for structural support, but they can also be a visual annoyance, lowering the exterior appeal. PVC column wraps come to the rescue in this situation.

PVC column wraps will entirely transform the position of external columns in your home, transforming them from a visual annoyance to an attractive feature.

PVC column wraps are a cost-effective, simple, and innovative way to cover pillars/posts virtually maintenance-free and give long-term security. They're simple to maintain and can be installed over an existing wooden or aluminum post with standard carpentry tools. PVC column wraps are light but durable, fire-resistant, weather-resistant, and even paintable.

PVC column wraps will dramatically improve the appearance of your house, but they must be mounted correctly.

But you must know about the installation process. However, here are a few essential tips that people often miss out on!

Tip 1: Make the Rough Spots Smooth

Wrap 320-grit sandpaper around a shim or ruler and run it through the groove to loosen it up if the lock miter joint is too tight. If possible, use a sanding block and 320 grit sandpaper to smooth out any rough patches outside the lock miter joint.

Tip 2: Secure the Wrap to the Post

To secure the PVC column wrap to the column, pierce through the furring strips of the structural post with stainless steel nails.

Tip 3: At the top and bottom of the column, position the cap and base.

Use flat-headed fasteners to secure the column's base to the board. The fasteners that you use should be long enough to penetrate the concrete or wooden foundation about a centimeter deep. The cap can now be screwed onto the top of the column shaft and sealed with adhesives. Fill the tiny gap between the lid, the rim, and the column shaft with PVC-compatible sealant.

Tip 4: Prepare the panels by pre-drilling and assembling them.

Both edges of the panels should be pre-drilled and countersunk. Make sure the seams aren't visible. Assemble the panels in a way that they are perfectly matched.

In the case of square column wraps, join the three panels together. You can skip this step if you're wrapping a circular column.

Tip 5: Think about the Theme and Design of Your Home

When choosing your PVC wraps, think about the theme and design of your home. Traditional-style capitals and bases complement Colonial and Cape Cod homes with their subtly ornate decoration. Craftsman-style capitals and bases have clean lines that complement the handcrafted elegance of Craftsman-style homes. The simplicity of Builder-style capitals and bases complements Modern-style homes perfectly.

Echon's PVC column wraps are your best choice if you're looking for elegant and high-quality PVC column wraps. Their column wraps come in various beautiful designs that give your columns a sleek, luxurious finish.

Did you find this blog informative? Then read a detailed version of  this on our blog: how to install PVC column wrap. This detailed blog takes on how to install PVC column wrap you through all the steps one by one and guides you through the process of PVC column wrap installation ! Share this blog with your friends and peers if you found it helpful. Thanks!