#interlnk

[mingos-commodoreblog]

Transferring Data over the serial Port with Microsoft Interlink

[fuckyeahfortran]

Dropped a file onto the ramdrive which persisted across a reboot to dump the MDT into maintenance mode, from which I could use INTERLNK to back up the 4MB internal flash over a 9600 baud serial connection. Like you do.

[jamload896]

Centroid Cnc Software

Centroid Acorn Cnc Control System

Centroid Acorn Software Download

Centroid Cnc Price

Probe and Tool Detector Extension and Splitter

Provides two probe sockets within easy reach near your console or on the front of your machine.

Acorn CNC Controller with Ethernet Connection, Free Centroid Software CNC Kits. $13.95 shipping. CENTROID CNC CONTROLLER CNC-1. As in 2016, the majority of respondents are using CNC Machines with higher end controls. Centroid is another notable climber, moving from 14th place up to 5th. Considering overall cost in the $500+ range for control software, controller itself and breakout board (all three are in one small DIN mount package) it’s almost a no-brained.

Leave your TT-1 tool detector plugged into one socket.

Plug your DP-4 or other probe into the second socket when needed, without having to walk around to the electrical cabinet on the back of the machine.

Probe Extension and Splitter: $240

Rotary axis conversion software

G Code reprocessor which converts XYZ part programs into cylindrical parts, by 'wrapping' X or Y around a rotary fourth axis.

Rotary Conversion software: $350

NWDNC

RS232 communications for DOS-based controls.

Receive job files (G codes) from any standard RS232 DNC sender: Cimco, Predator, Extreme DNC, Mastercam, Virtual Gibbs, etc. No need for INTERLNK and INTERSVR, so no problems with Windows 9x and FAT32.

With two keystrokes, your Centroid control is ready to receive the job. When the complete job has been received, it is automatically loaded and ready to run: just measure your tool lengths, set part zero, and go.

NWDNC can also send the current job back out to the DNC station. This is important if you maintain proven jobs in a central storage location.

NWDNC software: $120

PIPETHRD

PIPETHRD is a tapered thread milling G code generator. With it you can mill pipe threads using a single point or tapered full-form cutter.

PIPETHRD software: $120 Motion 5 for mac torrent.

External CYCLE START and FEED HOLD for M39 and M400 controls

Add large (22mm), easy to reach controls with in-cycle and feed hold indicator lights. Includes pushbutton controls installed in a small pendant box, which you can mount in any convenient location; modified PLC program; and on-site installation.

Auxiliary Emergency Stop button also available.

External CYCLE START and FEED HOLD: $250 + travel for installation Add $50 for Auxiliary Emergency Stop

Update to CNC11 control software version 3.16 for Windows

(For MPU11-based controls with a PC sufficient for running Windows 7)

Mill tool life management

Improved Lathe tool and offset library

S-Curve acceleration and deceleration of axes

Plus all the features of CNC10 version 2.72

On-site update to version 3.16 from early Linux version, including new SSHD with Windows, and operator's manual: $695 + travelOn-site update to version 3.16 from Windows v3.04 or newer, including new operator's manual: $395 + travel Pc game torrents for mac.

Update to control software version 2.72 for Linux

(For Linux-based controls with at least 256MB memory)

Accelerated graphics

Updated Linux kernel

Faster file access

USB mouse support

Plus all the features of version 2.38

On-site update to version 2.72 from pre-2.60 version, including new flash card and operator's manual: $495 + travelOn-site update to version 2.72 from v2.60 or newer, including new operator's manual: $395 + travel

Update to control software version 2.38 for Linux

(For Linux-based controls with less than 256MB memory)

MDI command recall

Spiralling irregular pocket cleanout in Intercon, with islands

USB flash drive support

Built-in RS232 file transfer (DNC)

DXF file import available as an option

Plus all the features of 8.23 for DOS

On-site update to version 2.38, including new operator's manual: $395 + travel

Update to control software version 8.23 for DOS

(For DOS-based controls with at least 16MB memory)

Centroid Acorn Cnc Control System

Distance-to-go DRO display

Runtime graphics

Rotated coordinates (fixture compensation)

Irregular pocket cleanout in Intercon

Circular frame mill in Intercon

Improved Math Help

Variables and arithmetic in G codes

Part Rotation G codes (G68/G69)

Touch Probe protection while jogging

On-site update to version 8.23, including new operator's manual: $395 + travel

Probing

Automatically locate part zeros using seven different cycles:

Inside Bore

Raised Boss

Inside Slot

Raised Web

Inside Corner

Outside Corner

Single-Axis (move to surface)

Also locate and measure features, or simply use the probe as an automatic electronic edge finder.

DP-4 package includes Centroid DP-4 probe for all surfaces, two ruby styli (1/4' and 1/8'), and software cycles.

DP-4 Probing Package: $1,590

Digitizing

Measure and duplicate 3D surfaces, on any material, using three digitizing patterns.

Includes Centroid DP-4 all-surface probe, two ruby styli, calibration ring, digitizing software cycles, and probing cycles (see above).

DP-4 Digitizing Package: $4,940

Centroid Acorn Software Download

Other Centroid Options

Click here for a summary of all Centroid software options and packages.

Centroid Cnc Price

Last updated 16-Nov-2016 MBL