#specialityvalve

[spvalve01]

Duplex Basket Strainer Manufacturer in India

Speciality Valve is a notable Duplex Basket Strainer Manufacturer in India. Our products are supplied all over India across regions like  Gujarat, Jharkhand and Andhra Pradesh.

If you need Valves for your Projects we provide and manufacturer valves in following Descriptions:

Body materials: Cast steel (WCB, WCC, WC6, WC9, LCC, LCB), Ductile iron, cast iron, SS304, SS316, Duplex steel (F51, F53, 5A, 6A).

Class: 150 to 600, PN10 – PN63.

Size: 2” to 32”.

Ends: Flanged

Do Visit us : https://www.specialityvalve.com/product-category/duplex-basket-strainer/

[voeurope]

Trunnion Ball Valve Manufacturer in India

Speciality Valve is distinguished as the leading Trunnion Ball Valve Manufacturer in India, catering to regions like Karnataka, Uttar Pradesh, and Andhra Pradesh.

What are Trunnion Ball Valve and working?

Trunnion ball valves hold significant importance in fluid control systems, facilitating the regulation of various fluids such as steam, gas, or oil within pipelines. It is a quarter-turn device with a ball that can rotate 90 degrees on its axis to either block or allow fluid flow. The main body of these valves has a spherical disk design that revolves to control the start-stop flow cycle. The disk, also known as the ball, has a little extending shaft at the top and bottom that is mechanically supported.

The flow within a trunnion ball valve is regulated by the position of an opening located in the center of the ball. The trunnion ball valve has an additional shaft that holds the ball from under. The Trunnion is a simple shaft. Its purpose is to keep the ball securely attached. In some cases, the Trunnion is an extension of the spherical ball, and in others, it is joined to the spherical ball disk by welded joints. Trunnion-mounted ball valves offer advantages in industries requiring precise shut-off action due to their inherent flexibility and reliability.

Key Components:

Body: The main housing of the valve, providing structural support.

Ball: Spherical disk within the valve body, rotates to control fluid flow.

Trunnion: Shaft supporting the ball from below, ensuring secure attachment.

Seat: Machined surface where the ball makes contact to regulate flow.

Stem: Connects the actuator to the ball, facilitating its rotation.

Disk: Another term for the ball, referring to its spherical shape.

Actuator: Mechanism for operating the valve, such as handwheel or gear.

Injection: Feature allowing for the introduction of sealant or lubricant into the valve.

Advantages of Our Trunnion Ball Valves

Long Service Life: Built to withstand wear and tear, ensuring durability.

High Pressure and Temperature Handling: Capable of operating in demanding conditions.

Wide Range of Materials: Available in various materials to suit diverse applications.

Tight Shutoff: Ensures minimal leakage for precise flow control.

Easy Operation: User-friendly design for seamless valve operation.

Customizable: Can be tailored to specific requirements for optimal performance.

Corrosion Resistance: Resistant to corrosion, extending valve lifespan.

Industries:

Oil and Gas Industry

Petrochemical Industry

Chemical Industry

Power Generation Industry

Water and Wastewater Treatment Plants

Mining Industry

Description :

Available Materials: F304L, A105, A182 F304, F316, F51, F316L, F53, A350 LF2, LF3, Inconel, Monel, Hastelloy(Forging), A351 CF3, A351 CF8, A216 WCB, A351 CF3M, A351 CF8M, A890 4A/ 5A, A352 LCC/ LCB (Casting)

Class: 150-2500, PN25 – PN450.

Size: 2” to 48”.

Ends: Buttweld, Socket weld, Threaded, Flanged

Operations: Handwheel Operated, Gear Operated, Electric Actuated, Pneumatic Operated.

For more details, visit our website: https://www.specialityvalve.com/product-category/trunnion-ball-valve/

[specialityvalve30]

Double Orifice Air Release Valve Manufacturer in India

Specialityvalve is the leading Double Orifice Air Release Valve Manufacturer in India. We supply to Karnataka, Uttar Pradesh and Andhra Pradesh. A Double Orifice Air Release Valve is a specialized type of valve used in pipelines and water distribution systems to automatically release air trapped inside the system. Unlike regular air release valves that have only one opening for releasing air, this valve has two separate openings or orifices. This design allows it to efficiently release large volumes of air and prevent the formation of air pockets or bubbles, which can obstruct the proper flow and operation of the fluid inside the pipeline. The second orifice in the valve acts as a vacuum breaker. It prevents the formation of a vacuum or negative pressure within the pipeline when water or fluid is rapidly drawn from it. Negative pressure can lead to pipe collapse or contamination, so the vacuum breaker function helps ensure the system operates safely and avoids damage. Essentially, it helps maintain the system's efficiency and ensures a consistent flow of liquid by expelling unwanted air.

Parts:

Body

Float Assembly

Orifices

Sealing Mechanism

Valve Cover

Pressure Relief Mechanism

Mounting Flange

Advantages:

Improved Air Removal

Prevention of Vacuum Formation

Reduced Water Hammer

Enhanced System Efficiency

Extended Pipeline Lifespan

Reliability

Versatility

Easy to Maintain

We manufacture Double Orifice Air Release Valve for the following industries:

Water and Wastewater Treatment Plants

Power Generation Industry

Oil and Gas Industry

Chemical Processing Industry

Mining Industry

Paper and Pulp Industry

Maritime and Shipping Industry

Automotive Industry

Petrochemical Industry

Aerospace Industry

Pulp and Paper Industry

Description:

Body Material- ductile iron, cast iron, WCB,WCC, WC6, LCB, LCC

Size- 1/2’’ to 8’’

Pressure No- PN6 to PN25

Class- 150 to 300

Ends- Flanged

Our Website: https://www.specialityvalve.com/product-category/double-orifice-air-valve/

[specialityvalve7]

Pressure Seal Globe Valve Manufacturer in India

Specialityvalve is the best Pressure Seal Globe Valve Manufacturer in India. We supply to India, Brazil and United Kingdom. A pressure seal globe valve is a mechanical device that has a spherical or globe-shaped body and an internal shaft that controls fluid flow in a pipeline or system.

Specialityvalve is the best Pressure Seal Globe Valve Manufacturer in India. We supply to India, Brazil and United Kingdom. A pressure seal globe valve is a mechanical device that has a spherical or globe-shaped body and an internal shaft that controls fluid flow in a pipeline or system. It is designed specifically to withstand and manage fluid flow under high-pressure and high-temperature situations, making it an important part in a variety of industries such as oil and gas, petrochemical, power generation, and industrial operations. Specialityvalve is a trusted Pressure Seal Globe Valve Manufacturer in India.

Description:

Body material:Cast Iron, Cast steel [A216 WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91]

Class:150 – 2500; PN10 – PN 450

Size:DN 10 – DN 1200

Ends: Butt weld, Flanged, threaded, socket weld

Operations:Hand-wheel operated, Pneumatic actuated, Electric actuated, Gear operated

Visit us:  https://www.specialityvalve.com/product-category/pressure-seal-globe-valve/

[specialityvalve037]

Specialityvalve is the best Check valve manufacturer in India. We supply to West Bengal, Haryana and Punjab. A check valve, also known as a non-return valve, one-way valve, or clack valve, is a mechanical device used in various fluid systems to allow the flow of fluid in one direction while preventing reverse flow.

Description:

Body Material- Cast Iron and Cast Steel (LF2, A216, WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F91), DUPLEX and Super duplex STEEL [F51, F53, F55] Forged Steel A105, A105N, F11, F22, F304, F316, F91] Alloy20, Hastelloy ALBR.

Size- ½” – 80”

Class-150 – 2500; PN10 – PN-450

Ends-threaded, socket weld, butt weld, flanged, lug, wafer

https://www.specialityvalve.com/product-category/check-valve/

[specialityvalve9696]

Trunnion Ball Valve Manufacturers

Speciality Valve is distinguished as the leading Trunnion Ball Valve Manufacturers in India, catering to regions like Karnataka, Uttar Pradesh, and Andhra Pradesh.

What are Trunnion Ball Valves and How They Work? Trunnion ball valves hold significant importance in fluid control systems, facilitating the regulation of various fluids such as steam, gas, or oil within pipelines. It is a quarter-turn device with a ball that can rotate 90 degrees on its axis to either block or allow fluid flow. The main body of these valves has a spherical disk design that revolves to control the start-stop flow cycle. The disk, also known as the ball, has a little extending shaft at the top and bottom that is mechanically supported.

The flow within a trunnion ball valve is regulated by the position of an opening located in the center of the ball. The trunnion ball valve has an additional shaft that holds the ball from under. The Trunnion is a simple shaft. Its purpose is to keep the ball securely attached. In some cases, the Trunnion is an extension of the spherical ball, and in others, it is joined to the spherical ball disk by welded joints. Key Components: Body: The main housing of the valve, providing structural support. Ball: Spherical disk within the valve body, rotates to control fluid flow. Trunnion: Shaft supporting the ball from below, ensuring secure attachment. Seat: Machined surface where the ball makes contact to regulate flow. Stem: Connects the actuator to the ball, facilitating its rotation. Disk: Another term for the ball, referring to its spherical shape. Actuator: Mechanism for operating the valve, such as handwheel or gear. Injection: Feature allowing for the introduction of sealant or lubricant into the valve.

Trunnion-mounted ball valves offer advantages in industries requiring precise shut-off action due to their inherent flexibility and reliability.

We are Trunnion Ball Valve Manufacturers in India our valve give following advantages:

Long Service Life: Built to withstand wear and tear, ensuring durability. High Pressure and Temperature Handling: Capable of operating in demanding conditions. Wide Range of Materials: Available in various materials to suit diverse applications. Tight Shutoff: Ensures minimal leakage for precise flow control. Easy Operation: User-friendly design for seamless valve operation. Customizable: Can be tailored to specific requirements for optimal performance. Corrosion Resistance: Resistant to corrosion, extending valve lifespan.

Industries: Oil and Gas Industry: Used in upstream, midstream, and downstream operations. Petrochemical Industry: Essential for handling chemicals and petrochemical products. Chemical Industry: Suitable for controlling the flow of various chemicals and solvents. Power Generation Industry: Employed in power plants for fluid control applications. Water and Wastewater Treatment Plants: Ensures efficient management of water resources. Mining Industry: Used in mining operations for slurry and fluid control. Hydrocarbon Industry: Critical for handling hydrocarbons and related fluids.

Product Description: Available Materials: F304L, A105, A182 F304, F316, F51, F316L, F53, A350 LF2, LF3, Inconel, Monel, Hastelloy (Forging), A351 CF3, A351 CF8, A216 WCB, A351 CF3M, A351 CF8M, A890 4A/5A, A352 LCC/LCB (Casting) Class: 150-2500, PN25 – PN450. Size: 2” to 48”. Ends: Buttweld, Socket weld, Threaded, Flanged Operations: Handwheel Operated, Gear Operated, Electric Actuated, Pneumatic Operated.

For more details, visit our website: https://www.specialityvalve.com/product-category/trunnion-ball-valve/

Address:- Corporate Office, Specialityvalve, 37 NGR Street, P.N Palayam, Coimbatore, Tamil Nadu – 641037

[specialityvalve9999]

Thermodynamic Steam Trap Manufacturer in India

Specialityvalve is one of the best Thermodynamic Steam Trap Manufacturer in India. A Thermodynamic steam trap is a device used to discharge two types of gases i.e., condensates and non-condensable gases with a negligible loss of live steam. Thermodynamic Steam traps are automatic valves. They open, close, or modulate automatically. It can only be operated in very high temperatures and pressures.

The thermodynamic steam trap is an extremely robust steam trap with a simple mode of operation. The trap operates using the dynamic effect of the flash steam as it passes through the trap. The only moving part is the disc above the flat face inside the control chamber or cap. On start-up, incoming pressure raises the disc and cools condensate immediately and then discharges from the inner ring, under the disc, and through three peripheral outlets. Specialityvalve is the leading Thermodynamic Steam Trap Manufacturer in India. It is famous for its premium quality products which comes in various material and sizes. All the products are tested according to requirements and standards of the clients.

Parts:

Body

Inlet/Outlet Ports

Disc/Valve

Seat

Lever Mechanism

Advantages:

Simplicity and Reliability: Thermodynamic steam traps have a simple design with no moving parts, making them highly reliable and easy to maintain. Their robust construction ensures long service life and minimal downtime.

Effective Condensate Drainage: These traps can effectively discharge condensate from steam systems, preventing the accumulation of condensate that could lead to reduced system efficiency, water hammer, and other operational issues.

Rapid Response: Thermodynamic steam traps respond quickly to changes in temperature and pressure, ensuring prompt condensate removal, even during start-up or varying load conditions.

Energy Efficiency: Efficient condensate removal improves the overall energy efficiency of the steam system. By preventing the loss of valuable latent heat from the condensate, thermodynamic traps help maximize the energy transfer in the system.

Wide Pressure Range: Thermodynamic steam traps can operate across a wide pressure range, making them suitable for both low and high-pressure steam systems.

Compact Size: Their compact design allows for easy installation in tight spaces, making them ideal for various industrial applications.

Applications:

Process Industries: Thermodynamic steam traps are widely used in process industries, including chemical plants, refineries, pharmaceuticals, and food processing facilities. They efficiently remove condensate from heat exchangers, steam lines, and other equipment, ensuring smooth and continuous operations.

Steam Distribution Systems: In district heating and steam distribution networks, thermodynamic steam traps play a crucial role in removing condensate, maintaining system efficiency, and preventing water hammer.

Textile Industry: In textile manufacturing processes, where precise temperature control is essential, thermodynamic steam traps help maintain optimal steam conditions and ensure reliable operation of dyeing machines, dryers, and other equipment.

Power Generation: In power plants, thermodynamic steam traps are utilized to discharge condensate from steam turbines and auxiliary equipment, contributing to the overall efficiency of the power generation process.

Description:

Material:  Ductile iron, Cast Iron, Carbon Steel, cast steel (WCB, WCC, LCC, LCB, WC6, WC9), Stainless Steel (SS316, SS304, CF8).

Class: 150 - 1500, PN10 – PN250.

Size: ½” to 2”.

Ends: Socket weld, butt weld, flanged, threaded.

Visit us to know more: https://www.specialityvalve.com/product-category/thermodynamic-steam-trap/

[valvesonly11]

Industrial valve manufacturer in India

Specialityvalve is the top Industrial valve manufacturer in India. An industrial valve is a mechanical device designed to control the flow of fluids (liquids, gases, or slurries) within a system. It is an important component of many industrial processes, including manufacturing, transportation, and power generation. Industrial valves are available in Coimbatore and Mumbai.

Industrial valves come in a variety of types, including gate valves, globe valves, ball valves, butterfly valves, check valves, and diaphragm valves, each with its own unique design and function. They are typically made of materials such as steel, brass, or bronze, and may be operated manually, electrically, or through the use of hydraulic or pneumatic systems. Some common applications of industrial valves include regulating the flow of fluids in pipelines, controlling the pressure of gases in boilers and tanks, and directing the flow of cooling water in power generation systems.

Specialityvalve is the leading Industrial Valve Manufacturer in India that provides quality valves in different designs and sizes.

Types of industrial valves Gate valves: These are the most common type of valves used in industries. They are used to open or close the flow of fluids by raising or lowering a gate inside the valve body. Globe valves: These valves have a globe-shaped body with an internal baffle that directs the fluid flow, which makes them suitable for regulating the flow rate. Ball valves: These valves use a spherical ball to control the flow of fluids. They are durable, have a low maintenance requirement, and provide tight shutoff. Butterfly valves: These valves have a disk-shaped closing mechanism that rotates around an axis perpendicular to the flow path to regulate the flow. Check valves: These valves allow fluids to flow in one direction only and prevent backflow. Diaphragm valves: These valves use a flexible diaphragm to regulate the flow of fluids. They are commonly used in applications where hygiene and cleanliness are critical. Pinch valves: These valves use a flexible tube that is pinched to restrict the flow of fluids. Pressure relief valves: These valves are designed to release excess pressure in a system to prevent damage to the equipment. Solenoid valves: These valves are operated electrically and are used in applications where remote control is required.

Advantages of Industrial valves Control of fluid flow: The primary function of industrial valves is to regulate the flow of fluids in a system. They provide precise control of flow rates, which is essential in many industrial processes. Prevention of leaks: Industrial valves can help prevent leaks in pipelines, tanks, and other equipment, ensuring that fluids are contained and transported safely. Durability: Industrial valves are typically made of high-quality materials that can withstand harsh environments, extreme temperatures, and corrosive fluids, making them durable and long-lasting. Low maintenance: Many types of industrial valves require minimal maintenance and can operate for long periods without the need for repair or replacement. Flexibility: Industrial valves come in various types, sizes, and materials, making them suitable for a wide range of applications. Improved safety: Industrial valves can help improve safety in industrial processes by providing shutoff and relief functions, preventing accidents and equipment damage. Energy efficiency: By controlling the flow of fluids, industrial valves can help optimize energy consumption, reducing energy costs and improving efficiency.

Available materials: Ductile iron, Monel, WCB, WCC, WC6, LCB, LCC, SS304, SS316, CF8, CF8M, CF3, CF3M, Aluminium Bronze, Bronze, Brass, F55, F53, F51, Inconel, Incoloy, Titanium Class: 150 to 2500 Nominal Pressure: PN6 to PN450 Size: ½” to 80” Ends: Flanged, Wafer, Lug, Buttweld, Socket weld, Threaded Operations: Lever operated, Gear operated, Electric actuated, Pneumatic actuated 

[specialityvalve290]

Pressure seal Globe Valve Manufacturer in India

Specialityvalve is a leading Pressure seal Globe Valve Manufacturer in India. A pressure seal globe valve is a type of industrial valve that is designed to provide a tight seal in high-pressure and high-temperature applications. This valve is named after its spherical body shape and its ability to maintain pressure integrity through a pressure-sealing mechanism.

The valve consists of a disk or plug that moves up and down in the valve body, controlling the flow of fluid through the valve. The pressure seal globe valve is designed with a metal-to-metal seal between the valve body and the bonnet, which provides a reliable seal against high pressures and temperatures.

This type of valve is commonly used in power plants, petrochemical plants, and other industries that require a high-pressure and high-temperature fluid flow control solution. Pressure seal globe valves are often used in applications where there is a need for tight shutoff, high reliability, and high endurance.

Our company is a well-known Pressure seal Globe Valve Manufacturer in India  which provides good quality valves in countries like Germany, Belgium, and Serbia.

  Advantages of pressure seal globe valve:

High-pressure and high-temperature capabilities: This type of valve is designed to handle extreme pressure and temperature conditions, making it ideal for use in industries such as power generation and petrochemical.

Tight shutoff: The metal-to-metal seal in a pressure seal globe valve provides a tight shutoff, preventing any leakage of fluid through the valve.

High reliability: Due to its design and construction, the pressure seal globe valve is highly reliable, even in harsh operating conditions.

Durability: These valves are typically made from materials such as carbon steel, stainless steel, or alloy steel, which are highly durable and resistant to corrosion and erosion.

Low maintenance: The pressure seal globe valve requires minimal maintenance due to its sturdy construction and reliable performance.

Flexible installation: Pressure seal globe valves can be installed in any position, making them suitable for a wide range of applications.

Industries of pressure seal globe valve:

 Oil and Gas Industry

Power Generation Industry

Chemical Industry

Water Treatment Industry

Electric power industry.

Body material:Cast Iron, Cast steel [A216 WCB, WCC, LCB, LCC, WC6, WC9), Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91]

Class:150 – 2500; PN10 – PN 450

Size:DN 10 – DN 1200

Ends: Butt weld, Flanged, threaded, socket weld

Operations-: Hand-wheel operated Globe Valve, Pneumatic actuated Globe Valve, Electric actuated Globe Valve, Gear operated Globe Valve

[hspecialityvalve]

Water Pressure Reducing Valve Manufacturer in India

Specialityvalve is the topmost Water Pressure Reducing Valve Manufacturer in India. A water pressure reducing valve (WPRV) is a plumbing device that reduces the water pressure coming into a building from the municipal supply line. It works by using a spring-loaded diaphragm to regulate the flow of water, ensuring that the pressure does not exceed a certain level. WPRVs are important components in plumbing systems because high water pressure can cause damage to pipes, fixtures, and appliances. If you are experiencing issues with water pressure, installing a WPRV can help to mitigate the problem and prevent future damage. When installing a WPRV, it is important to choose the right type of valve for your plumbing system and to follow proper installation procedures. Regular maintenance and testing of WPRVs can also help to ensure that they are functioning properly.

Specialityvalve is a reputableWater Pressure Reducing Valve Manufacturer in Indiawhich provides high quality valves in different sizes and materials.

Types of water pressure reducing valve:

Direct Acting Pressure Reducing Valves

Pilot-Operated Pressure Reducing Valves

Adjustable Pressure Reducing Valves

Combination Pressure Reducing and Backflow Prevention Valves

Advantages Of Water Pressure Reducing Valves are

Prevents Damage to Plumbing System

Extends the Life of Appliances and Fixtures

Improves Water Efficiency

Increases Safety

Contributes to Energy Efficiency

Applications of water pressure reducing valves

Industrial applications: water pressure reducing valves are used in various industrial applications, such as chemical processing, pharmaceutical production, and food and beverage manufacturing. In these settings, precise water pressure control is necessary to ensure the quality and safety of the products being produced.

Fire protection: It is used in fire protection systems to regulate water pressure and flow to fire sprinklers and hydrants. This ensures that the fire protection system is effective in case of a fire and that there is enough water pressure and flow to extinguish the fire.

Agricultural irrigation: They are also used in agricultural irrigation systems to regulate water pressure and flow to crops. This helps to reduce water waste and increase crop yield by ensuring that the water supply is consistent and controlled.

Industries of Water Pressure Reducing Valves are

Industrial Plants

Irrigation Systems

Fire Protection Systems

Municipal Water Systems

Body: Cast iron, Cast steel (WCB, WCC, LCC, LCB, WC6, WC9), Stainless steel (SS304, SS316, CF8), Ductile iron.

Size: ½” to 24”.

Class: PN10 - PN100, 150-600.

Ends: Socket weld, butt weld, Flanged, threaded.

https://www.specialityvalve.com/product-category/water-pressure-reducing-valve/

[jvalve]

Ball valve manufacturer in India

Specialityvalve is the Leading  Ball Valve Manufacturer in India. A  ball valve is a type of valve used to control the flow of fluids (liquids or gases) in a pipeline. It consists of a hollow ball, usually made of metal or plastic, with a hole or bore through its center. The ball is mounted in the middle of the valve body and rotates on a shaft or stem that extends outside of the valve body.

Ball Valve Function

A ball valve is a type of valve that uses a ball-shaped disk to control the flow of fluids or gases through a pipe. The ball has a hole or port in the center that allows the fluid or gas to pass through when the valve is open. When the valve is closed, the ball rotates to block the flow of fluid or gas.

The function of a ball valve is to regulate the flow of a fluid or gas in a pipeline. Ball valves are commonly used in industrial applications, such as oil and gas, chemical, and water treatment plants. They are also used in residential plumbing systems and in irrigation systems.

Ball valves are preferred over other types of valves because they are more reliable, have a longer service life, and require less maintenance. They are easy to operate, and their simple design allows for quick and easy repairs.

Specialityvalve is the top Ball Valve Manufacturer in India which is famous for its premium quality valves and we also customize it according to the customer’s requirement.

Types of ball valve

Full port ball valve

Reduced port ball valve

Floating ball valve

Trunnion ball valve

Three-way ball valve

V port ball valve

Cryogenic ball valve

Advantages of ball valve

Quick and easy operation

Durability

Low maintenance

Tight seal

High-pressure and temperature rating

Versatility

Cost-effective

Industries of ball valve

Oil and gas

Chemicals

Water and wastewater

Power generation

https://www.specialityvalve.com/product-category/ball-valve/

[specialityvalve01]

Pneumatic Actuated Valve Manufacturer in India

Specialityvalve is one of the largest Pneumatic Actuated valve manufacturer in India . A pneumatic actuator valve converts energy into mechanical motion. A pneumatic actuator valve is used to control and regulate the flow of medium through a valve with an actuator that operates on compressed air.

Types of Pneumatic Actuated Valves:

Pneumatic Actuated Ball valve

Pneumatic Actuated Gate valve

Pneumatic Actuated Butterfly valve

Pneumatic Actuated Knife Gate valve

 Available materials: CF8M, CF8, SS316, CF8M, WCB, WC6, WCC, LCB, LCC, SS304, SS316, Cast Iron, Ductile iron

Class: 150 to 2500

Nominal Pressure: PN6 to PN450

Size: 1/2" to 72"

Ends: Flanged, Buttweld, Socket weld, Threaded, Wafer, Lug

Operation: Pneumatic Actuated

Standards: ASME, API6D, API607, DIN,BS, ANSI

https://www.specialityvalve.com/product-category/pneumatic-actuated-valves/

[specialityvalve30]

Alloy 20 Valve Manufacturer in India

Specialityvalve is the prime Alloy 20 Valve Manufacturer in India. We supply to Andhra Pradesh, Kerala and Bihar. Alloy 20 valve, also known as Carpenter 20 valve, is a specialized type of industrial valve made from a specific alloy known as Alloy 20. This alloy is a highly corrosion-resistant material designed to withstand a wide range of corrosive environments, including sulfuric acid, chloride solutions, and various other aggressive chemicals. Alloy 20 valves are widely used in industries such as chemical processing, petrochemicals, pharmaceuticals, and food processing, where exposure to corrosive substances is common. We manufacture Alloy 20 valve which is made from a nickel-iron-chromium-based alloy with additions of copper and molybdenum. Its chemical composition typically includes around 24% nickel, 20% chromium, 3-4% copper, and 2-3% molybdenum, along with small amounts of other elements such as iron, manganese, and niobium. The presence of these elements imparts exceptional corrosion resistance and mechanical strength to the alloy.

Types:

Alloy 20 Ball Valves

Alloy 20 Gate Valves

Alloy 20 Globe Valves

Alloy 20 Check Valves

Alloy 20 Butterfly Valves

Alloy 20 Diaphragm Valves

Alloy 20 Plug Valves

Alloy 20 Needle Valves

Alloy 20 Pressure Relief Valves

Alloy 20 Control Valves

Advantages:

Corrosion Resistance

Wide Chemical Compatibility

High Temperature Resistance

Mechanical Strength

Ease of Fabrication

Low Risk of Contamination

Reduced Maintenance Costs

Long Service Life

Flexibility

Versatility

Industries:

Chemical Processing Industry

Petrochemical Industry

Pulp and Paper Industry

Oil and Gas Industry

Water Treatment Industry

Desalination Plants

Marine Industry

Power Generation Industry

Mining Industry

Semiconductor Industry

Textile Industry

Description:

Available material: Alloy20 (N08020)

Size: 1/2” to 12”

Class: 150 to 2500

Nominal Pressure: PN10 to PN450

Ends: Socket Weld, Flanged, Wafer, Lug, Threaded, Buttweld

Operations: Lever Operated, Handwheel, Electric Actuated and Pneumatic Actuated, Gear Operated

Visit us: https://www.specialityvalve.com/product-category/alloy-20-valves/

[specialityvalve7]

Valve Manufacturer in India

Specialityvalve is a leading Valve Manufacturer in India. We supply to France, Australia, Mexico and Turkey. Valves are crucial components used in various industrial processes to control the flow of liquids, gases, and slurries. These devices play a pivotal role in regulating, redirecting, and shutting off the flow of fluids within pipelines and systems.

Description:

Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M , F55, F51, F53, Monel, Ductile Iron.

Size: ½” to 48”

Class: 150 to 2500

Nominal Pressure: PN10 to PN450

Operation: Lever Operated, gear operated, Electric Actuated and Pneumatic Actuated.

End: Connection Flanged, Threaded, Buttweld, Socketweld

Medium LNG, Cryogenic application, Water, Air, Steam

[specialityvalve037]

Pressure Reducing Valve Manufacturer in India

Specialityvalve is the leading Pressure Reducing Valve Manufacturer in India. We supply to Kerala, Tamil Nadu and Gujarat. A pressure-reducing valve also known as a PRV is an automatic valve that reduces excess pressure in a system. It has the ability to lower high pressure to low pressure. The valve's primary function is to provide precise control of downstream pressure, and it constantly adjusts the valve opening; the pressure is maintained constant during pressure changes.

Under certain circumstances, pressure-reducing valves can be used to defend against water hammer, and by-pass valves are applicable to save the system during power outages. These valves can react quickly by sensing and altering based on the downstream pressure. As the control element, these mechanical valves activate a spring against a diaphragm or piston, making them simple and dependable in operation.

Specialityvalve is the best Pressure Reducing Valve Manufacturer in India. Compressed air systems, power tools, pneumatic control systems, and control valves for industrial gas storage and distribution systems all use direct-acting and pilot-operated pressure-reducing valves for air and gas services.

Types

Direct Acting Pressure Reducing Valve

Pilot-Operated Pressure Reducing Valve

Steam Pressure Reducing Valve

Water Pressure Reducing valve

Pressure Relief valve

Float Control valve

Advantages:

Protection of Equipment

They reduce the risk of system overpressure

They help minimize energy consumption

In water supply systems, these valves help conserve water by regulating pressure

They extend the lifespan of pipelines, pumps, valves, and other system components

Noise Reduction

Improved System Performance

They allow for precise control of pressure

They meet regulatory standards and safety codes by ensuring that pressure levels within a system are within acceptable limits.

Industry:

Oil and Gas Industry

Water Supply and Distribution Plants

Chemical Processing Industry

Petrochemical Industry

Power Generation Industry

Pulp and Paper Industry

Aerospace Industry

Manufacturing Industry

Mining Industry

Automotive Industry

Marine Industry

Construction Industry

Description:

Available materials: Ductile Iron, WCB, WCC, WC6, LCB, LCC, SS304, SS316, Cast iron

Size: 1/2″ to 24″.

Nominal Pressure: PN10 to PN100.

Class: 150 to 600.

Ends: Threaded, Buttweld, Socket weld, Flanged

[specialityvalve121]

https://www.specialityvalve.com/product-category/gate-valve/