#we are using totally different operating systems with completely different system requirements

[thenightisland]

had to go to a little training inservice thing on employee burnout today which was hilarious bc i am definitely not burned out by this job quite the contrary this is the least taxing any job has ever been on me but i scored insanely high on their little burnout thing and i wanted to be like buddy what you consider career-ending burnout i, as an autistic person with a full time job, call tuesday

[doomsayersunited]

A Decade Of Doom!

I started this blog ten years ago to compile the growing evidence that our planet would not longer be able to sustain human life by 2050, thanks to our continued, capitalist-fueled efforts to destroy all the systems we rely upon to sustain life. The first thing I put up here was this essay, on February 20, 2014. Now, a decade later, I thought it might be "fun" to look at what's changed: 1) Earth Overshoot Day

In 2014, "Earth Overshoot Day" (the day that humanity collectively consumes more resources from nature than it can regenerate over a year) was August 19th. Now, in 2024, Earth Overshoot Day is August 1st, 2.5 weeks earlier. At this rate and assuming things don't accelerate (even though they are likely to), Earth Overshoot Day will be around June 17th by 2050. 2) Biocapacity Biocapacity is the amount of resources contained on the planet required available to sustain life, measured by area. In 2014, I calculated that the planet had a biocapacity of 1.7 hectares per person. By dividing the total available biocapacity today in 2024 with the current global population as I did then, it now appears that there are just 1.5 hectares of planetary resources left per person to extract all the materials needed to sustain life, as well as all the area available to dispose of waste. That's a 12% loss over ten years. At that rate, we can expect to lose another 30% of biocapacity by 2050, going down to just 1.05 hectares per person by then, and that's assuming that the rate of biocapacity loss does not accelerate further and that the global population suddenly stops increasing after a run of non-stop increases spanning five centuries. Oh, also a reminder that the average human requires 2.7 hectares of land to sustain its current consumption habits/levels. So. 3) Individual Conservation To illustrate the futility of individual conservation at this point in the apocalypse, let me give you an example: If you were: a fully-vegan localvore living in a one-bedroom apartment with nine other people and using 100% renewably-generated electricity; who did not ever use motorized transportation of any kind or buy new clothing, furnishings, electronics, books, magazines, or newspapers and recycled all the waste you generated that was recyclable, you'd only require 1.4 hectares of biocapacity to sustain yourself. That is close to the kind of lifestyle extremism it would take to live sustainably. Deviate from that level of stoicism even slightly (say by living in a two-bedroom apartment with three other people instead of a one-bedroom apartment with nine other people and taking a single, four-hour roundtrip flight, once a year) and you're now consuming 1.6 hectares of biocapacity, which means you're using more resources than the world has available for you if everything was divided evenly among everybody. Of course, biocapacity, like all resources, are not divvied up evenly among everybody, which is why there are currently 114 different armed conflicts happening worldwide - the highest number of armed conflicts since 1946. 2023 was the most violent year in the last three decades. 4) Other Signs Of The End Times In my 2014 essay, I referenced the work of geologist Dr. Evan Fraser, who studies civilization collapse. In his book Empires of Food, Dr. Fraser noted common signs of a civilization about to collapse, which began to appear about two decades before it all goes completely to hell. Those signs were: -a rapidly-increasing and rapidly-urbanizing population We've added 700 million people to the planet since I began this blog in 2014. And where is everyone moving to?

-farmers increasingly specializing in just a small number of crops " "As farm ecosystems have been simplified, so too are the organisms that populate the farm.  A farm that specializes in a limited number of crops in short rotations does not, for example, look for plant varieties that do well in more complex rotations with intercropping.  A beef feedlot operation wants breeds that gain weight quickly on grain diets and does not want cattle breeds that digest well pasture grasses and thrive in all year outdoor environments on the range." The result? Recent estimates put the loss of global food diversity over the last 100 years at 75%. Over the 300,000 species of edible plants that exist, humans only consume about 200 of them in notable quantities, with 90% of crop plants not being grown commercially. -endemic soil erosion Climate change and the need to raise more crops have combined to increase the rate of agricultural soil erosion globally. Back in 2014, when I started blogging about the end of everything, the UN had already determined that there was only enough fertile soil left to plant 60 more annual crops. So, by 2074, we won't be able to grow food, full stop. This of course comes at a time when the global population continues to increase, and with it the need to grow more food. If projections are accurate, we will need to increase food production by 50% over the next three decades to feed everyone. -a dramatic increase in the cost of food and raw materials When I started this blog in 2014, I noted that 2011-2013 had seen the highest food prices on record. So what's happened since then?

It's important to point out here that the current food price spike started in 2020, so if Dr. Fraser's calculations are correct, the food system will collapse sometime around 2034, taking civilization with it. I closed my debut essay on this blog with a quote from the (now deceased) climate scientist Dr. James Lovelock, who advised a Guardian journalist to "enjoy life while you can. Because if you're lucky it's going to be 20 years before it hits the fan." That interview was published in 2008. We have four years left to enjoy.

[mostlysignssomeportents]

The Framework is the most exciting laptop I've ever broken

From the moment I started using computers, I wanted to help other people use them. I was everyone’s tech support for years, which prepared me for the decade or so when I was a CIO-for-hire. In the early days of the internet, I spent endless hours helping my BBS friends find their way onto the net.

Helping other people use technology requires humility: you have to want to help them realize their goals, which may be totally unlike your own. You have to listen carefully and take care not to make assumptions about how they “should” use tech. You may be a tech expert, but they are experts on themselves.

This is a balancing act, because it’s possible to be too deferential to someone else’s needs. As much as other people know about how they want technology to work, if you’re their guide, you have to help them understand how technology will fail.

For example, using the same memorable, short password for all your services works well, but it fails horribly. When one of those passwords leak, identity thieves can take over all of your friend’s accounts. They may think, “Oh, no one would bother with my account, I’ve got nothing of value,” so you have to help them understand how opportunistic attacks work.

Yes, they might never be individually targeted, but they might be targeted collectively, say, to have their social media accounts hijacked to spread malware to their contacts.

Paying attention to how things work without thinking about how they fail is a recipe for disaster. It’s the reasoning that has people plow their savings into speculative assets that are going up and up, without any theory of when that bubble might pop and leave them ruined.

It’s hard to learn about failure without experiencing it, so those of us who have lived through failures have a duty to help the people we care about understand those calamities without living through them themselves.

That’s why, for two decades, I’ve always bought my hardware with an eye to how it fails every bit as much as how it works. Back when I was a Mac user — and supporting hundreds of other Mac users — I bought two Powerbooks at a time.

I knew from hard experience that Applecare service depots were completely unpredictable and that once you mailed off your computer for service, it might disappear into the organization’s bowels for weeks or even (in one memorable case), months.

I knew that I would eventually break my laptop, and so I kept a second one in sync with it through regular system-to-system transfers. When my primary system died, I’d wipe it (if I could!) and return it to Apple and switch to the backup and hope the main system came back to me before I broke the backup system.

This wasn’t just expensive — it was very technologically challenging. The proliferation of DRM and other “anti-piracy” measures on the Mac increasingly caused key processes to fail if you simply copied a dead system’s drive into a good one.

Then, in 2006, I switched operating systems to Ubuntu, a user-centric, easy-to-use flavor of GNU/Linux. Ubuntu was originally developed with the idea that its users would include Sub-Saharan African classrooms, where network access was spotty and where technical experts might be far from users.

To fulfill this design requirement, the Ubuntu team focused themselves on working well, but also failing gracefully, with the idea that users might have to troubleshoot their own technological problems.

One advantage of Ubuntu: it would run on lots of different hardware, including IBM’s Thinkpads. The Thinkpads were legendarily rugged, but even more importantly, Thinkpad owners could opt into a far more reliable service regime that Applecare.

For about $150/year, IBM offered a next-day, on-site, worldwide hardware replacement warranty. That meant that if your laptop broke, IBM would dispatch a technician with parts to wherever you were, anywhere in the world, and fix your computer, within a day or so.

This was a remnant of the IBM Global Services business, created to supply tech support to people who bought million-dollar mainframes, and laptop users could ride on its coattails. It worked beautifully — I’ll never forget the day an IBM technician showed up at my Mumbai hotel while I was there researching a novel and fixed my laptop on the hotel-room desk.

This service was made possible in part by the Thinkpad’s hardware design. Unlike the Powerbook, Thinkpads were easy to take apart. Early on in my Thinkpad years, I realized I could save a lot of money by buying my own hard-drives and RAM separately and installing them myself, which took one screwdriver and about five minutes.

The keyboards were also beautifully simple to replace, which was great because I’m a thumpy typist and I would inevitably wear out at least one keyboard. The first Thinkpad keyboard swap I did took less than a minute, and I performed it one-handed, while holding my infant daughter in my other hand, and didn’t even need to read the documentation!

But then IBM sold the business to Lenovo and it started to go downhill. Keyboard replacements got harder, the hardware itself became far less reliable, and they started to move proprietary blobs onto their motherboards that made installing Ubuntu into a major technical challenge.

Then, in 2021, I heard about a new kind of computer: the Framework, which was designed to be maintained by its users, even if they weren’t very technical.

https://frame.work/

The Framework was small and light — about the same size as a Macbook — and very powerful, but you could field-strip it in 15 minutes with a single screwdriver, which shipped with the laptop.

I pre-ordered a Framework as soon as I heard about it, and got mine as part of the first batch of systems. I ordered mine as a kit — disassembled, requiring that I install the drive, RAM and wifi card, as well as the amazing, snap-fit modular expansion ports. It was a breeze to set up, even if I did struggle a little with the wifi card antenna connectors (they subsequently posted a video that made this step a lot easier):

https://twitter.com/frameworkputer/status/1433320060429373440

The Framework works beautifully, but it fails even better. Not long after I got my Framework, I had a hip replacement; as if in sympathy, my Framework’s hinges also needed replacing (a hazard of buying the first batch of a new system is that you get to help the manufacturer spot problems in their parts).

My Framework “failed” — it needed a new hinge — but it failed so well. Framework shipped me a new part, and I swapped my computer’s hinges, one day after my hip replacement. I couldn’t sit up more than 40 degrees, I was high af on painkillers, and I managed the swap in under 15 minutes. That’s graceful failure.

https://guides.frame.work/Guide/Hinge+Replacement+Guide/104

After a few weeks’ use, I was convinced. I published my review, calling the Framework “the most exciting laptop I’ve ever used.”

https://pluralistic.net/2021/09/21/monica-byrne/#think-different

That was more than a year ago. In the intervening time, I’ve got to discover just how much punishment my Framework can take (I’ve been back out on the road with various book publicity events and speaking engagements) and also where its limits are. I’ve replaced the screen and the keyboard, and I’ve even upgraded the processor:

https://guides.frame.work/Guide/Mainboard+Replacement+Guide/79

I’m loving this computer so. damn. much. But as of this morning, I love it even more. On Thursday, I was in Edinburgh for the UK launch of “Chokepoint Capitalism,” my latest book, which I co-authored with Rebecca Giblin.

As I was getting out of a cab for a launch-day podcast appearance, I dropped my Framework from a height of five feet, right onto the pavement. I had been working on the laptop right until the moment the cab arrived because touring is nuts. I’ve got about 150% more commitments than I normally do, and I basically start working every day at 5AM and keep going until I drop at midnight, every single day.

As rugged as my Framework is, that drop did for it. It got an ugly dent in the input cover assembly and — far, far worse — I cracked my screen. The whole left third of my screen was black, and the rest of it was crazed with artefacts and lines.

This is a catastrophe. I don’t have any time for downtime. Just today, I’ve got two columns due, a conference appearance and a radio interview, which all require my laptop. I got in touch with Framework and explained my dire straits and they helpfully expedited shipping of a new $179 screen.

Yesterday, my laptop screen stopped working altogether. I was in Oxford all day, and finished my last book event at about 9PM. I got back to my hotel in London at 11:30, and my display was waiting for me at the front desk. I staggered bleary-eyed to my room, sat down at the desk, and, in about fifteen minutes flat, I swapped out the old screen and put in the new one.

https://guides.frame.work/Guide/Display+Replacement+Guide/86

That is a fucking astoundingly graceful failure mode.

Entropy is an unavoidable fact of life. “Just don’t drop your laptop” is great advice, but it’s easier said than done, especially when you’re racing from one commitment to the next without a spare moment in between.

Framework has designed a small, powerful, lightweight machine — it works well. But they’ve also designs a computer that, when you drop it, you can fix yourself. That attention to graceful failure saved my ass.

If you hear me today on CBC Sunday Magazine, or tune into my Aaron Swartz Day talk, or read my columns at Medium and Locus, that’s all down to this graceful failure mode. Framework’s computers aren’t just the most exciting laptops I’ve ever used — they’re the most exciting laptops I’ve ever broken.

[Image ID: A disassembled Framework laptop; a man's hand reaches into the shot with a replacement screen.]

[iwonderwh0]

Fic ideas that I'll never write #6 (? I clearly have no idea, not sure why I keep trying to keep a count)

Below are just some incoherent thoughts with no specific whatsoever born from my love for the concept of a single mind occupying multiple bodies. I don't know why I post something so vague, but huh, my blog – entry to my brain fog, I just need it out of my system ↓

Not DPD, but possibly some organisation on the shady side of the law. Hank as an undercover agent for some fucking blockbaster-level operation with assigned android partner(s).

"Let me introduce to you, CyberLife's latest prototype and your partner – Connor"

Hank looks at the small crowd of identical looking men in strict clothing.

"Which one of 'em?"

"All of them. But for this operation he's just one human."

"Hi, I'm happy to be working with you!" one of the clones goes ahead and extends a hand for a handshake. Hank looks at him, then at all the other clones, about seven of them in total, which are looking back at him and simultaneously on all of their faces smile melts into some miffed disappointment as the one in front of Hank puts his hand down, realising that there'll be no handshake.

"Is this a joke or something?" Hank asks.

"This is a high risk operation that requires one person to be literally at several places at once, and we also expect to loose a few of them. All their knowledge is shared among each one of them at all times, so they don't need additional devices to communicate, which is perfect for us."

"Why am I here?"

"You're our cover, ensuring that he'll pass as human. He would look suspicious on his own even with human credentials, so he will be seen with you, and if anyone asks, you'll be ready to dispel any suspicion."

A folder of files is moved acrossed the table to Hank.

"Here's his cover-up human identity. Make yourself familiar"

Hank flips through the pages.

"This will all become useless the moment he bleeds blue."

"Connor?"

One of the clones goes ahead and rolls up one of his sleeves, takes a knive handed to him by one of the others, and then draws its blade across his bare skin. Red blood starts to flow from a cut.

"What the fuck!"

Hank stands up and steps back.

"Looks convincing, isn't it?" asks the clone with cut hand.

"But they're all androids, right?"

"All except one," says one of the clones.

Hank looks from one face to another, trying to spot any difference, but they all look completely identical

Clones smile proudly.

"You believed me, didn't you?"

"Point proven," another clone puts a hand on Hank's shoulder.

"Don't fucking touch me," Hank shakes the hand off his shoulder.

"Sorry," says another clone, not the one who touched Hank.

--------

During the first days of operation Hank is getting accustomed to the thought that all of those androids are ultimately the same one that somehow is spreaded evenly across several bodies, making it possible for one to continue the conversation where the other one left it.

The hotel the "two" of them are checked in provided them two-room number, but it still feels really crowded even though there are rarely more than three Connors at once.

At first it was weird and annoying when different clone answered Hank's question adressed to another. It was hard to adjust to the thought that they're all the same exact entity.

"What happens when one of you will get destroyed?"

-----------

"As long as we're sharing the same network it doesn't matter until there's at least one of us left. No information will get lost. As you can see, I'm fault-tolerant"

----------

Connor is trying to act friendly and involve Hank in dialogue, but the man seems cold and rather annoyed by this company, so he switches his friendly attitude to more confrontational one, trying to argue with Hank instead, and ironically enough it works, and Hank turns far more talkative when he is trying to prove something. Being annoying becomes more preferable way to interact with the human than to be polite and friendly. Sometimes it backfires but overall it provokes more reaction and becomes kind of a game in itself.

"Oh no."

Two models got destroyed and appeared to be completely calm about going somewhere they knew they'll not return from. Everything is going according to the plan until there's another situation that will result in a loss of yet another one of the Connors. But this time something is different.

"What, remembered something?" Hank stops and turns around.

"I'm offline. I'm not a part of the network."

"So what?"

Connor grabs Hank by hand and looks genuinely terrifyed.

"I don't want to die."

Hank looks at him, trying to understand if it's supposed to be happening. Other times the android didn't seem to bother, not even a little, but this...

Time was running out. At this point there was no important information to loose with this specific Connor model, and saving him would partly compromise the mission. He must be aware of this, usually he was insufferably precise about following the plan to the point of being a headache, so him suddenly saying anything like that was... unusual.

Hank knows, that according to the plan he would better ensure that android goes where he was supposed to go, whether he wants it or not, but fuck.

"Okay, let's go. Quick."

They escape using the path that was supposed to be for Hank only and the whole time this Connor is terrified. He keeps thanking Hank then acts anxious about jeopardizing the mission, all while clinging to Hank's hand as if his life depends on it. Hank doesn't have it in him to ask to let his hand go. When they are far enough to be safe Hank is trying to calm the android down but he keeps panicking about being outside the network and that it could only mean one of two things – whether his connection somehow got broken or all the other Connors are destroyed and he's the last one. This version, however gets resolved fairly quickly as Hank reaches the place where, according to the plan, he must've been met by another model. And he is. Another Connor looks at him, then at Connor that came along with him, and now he looks just as terrified.

He goes ahead and the two androids touch hands, skin retracting as they interface. The one that was waiting for Hank looks at him closely

"You shouldn't have done it," he doesn't brake the eye contact as he follows it with "Thank you."

-----

From now on their previously tense relationships get a lot warmer. They have to do some explanation to their superior, but they cone up with some convincing enough story, hiding what actually happened. There'd be no sympathy for an android compromising the missing out of fear of its own death – something that shouldn't even be a concern. They both know it.

"You're all back online, right?" Hank asks at some point.

Connor doesn't act as smug as he used to before and instead of being annoying little shit who's quite inconsiderate to Hank's human needs he gets instead really attentive. Doesn't try to exhaust Hank with dialogue either, finally getting accustomed to the sound of silence.

"I am, yes" one of the Connor's says

"But I am still not sure what happened," another follows.

"Has it happened before?"

"No. At least...not that I can remember."

"What, I thought you are incapable of forgetting anything."

"Currently I have five different versions of the same timeline, of course I have to sacrifice some memories if they serve no purpose – it would be wasteful to save everything"

"How do you know what's important or not?"

"Usually I can tell."

"What if you're wrong?"

"Then I guess I'm wrong. I'd better be right more often than not or else..."

"Else?"

"I'll be deactivated"

"For forgetting something important?"

"Not exclusively, I meant more general mistakes, like deviating from original plan or not being able to follow through all the way due to some obstacles. I should be able to improvise if necessary, and if I can't be effective at least in 96% cases then I should be removed from the mission."

"That's...a really specific number. But, hey, even following the plan sometimes things just don't work up, right? Not necessarily because someone fucked it up, I mean, shit just happens."

"It only reveals imperfections in original plan, which is a mistake, still."

"Well, it's only human to make mistakes."

The two clones smile at him sadly

"Yeah, you're right – it's only human."

-------------

I don't have any idea of what is it about or how should it continue and end, so I'll just leave it here as any other #Fic ideas that I'll never write

[digitalartmarketing]

Types of Artificial Intelligence

it's impossible to quantify the exact number of AI systems active in the world right now. Here's why:

Different Definitions of AI: There's no universally agreed-upon definition of artificial intelligence. Some consider even basic algorithms and decision-making rules to be AI, while others hold a stricter standard requiring advanced learning capabilities and self-awareness. This ambiguity makes it hard to estimate the total number.

Vast and Hidden Systems: Many AI systems operate discreetly within corporate infrastructures, research labs, and embedded devices. They might not be publicly known or tracked, contributing to an undercount.

Rapidly Evolving Landscape: The field of AI is constantly evolving, with new systems and applications emerging daily. By the time any attempt at counting them is complete, it would likely be outdated.

However, some attempts offer a glimpse into the sheer scale of AI activity:

Statista: Estimates over 800 million AI software programs deployed globally in 2023.

DeepMind: Their LaMDA language model alone interacts with hundreds of millions of users daily.

Gartner: Predicts over 8 billion AI-powered devices will be used in 2023.

While not an exact figure, these examples suggest the number of active AI systems is vast and rapidly growing. As AI becomes increasingly integrated into everyday life, this number is only expected to rise.

Remember, the focus shouldn't be solely on the quantity of AI systems but on their impact and responsible development. We need to ensure these systems are used ethically, transparently, and for the benefit of humanity.

SEO AND AI MARKETING - DIGITAL ART STRATEGY

[agimamedical]

Contact us for Best Service

Agima's solutions don't come in a box that can just be plugged in and used. We take pleasure in being able to swiftly recognise your problems and provide solutions while always keeping in mind how little disturbance you require in your practise. For more than 35 years, both locally in Florida and throughout the country, we have assisted companies. We are familiar with the healthcare system, the Florida market, and the unique possibilities and difficulties posed by interventional pain management. Every member of our team has at least a doctorate in their discipline and at least ten years of experience working in the medical industry. To effectively implement our strategy, theory and practise must be combined. Our experts have a combined total of more than 70 years of practical experience in issue solutions. That is a lot of issues, and there are even more answers.

Fran has over 30 years of experience Management Health Office and providing healthcare. Fran has established national plans for hospital chains and medical practises while working in the marketing and operations sectors of the healthcare industry. In addition to having previously ran her own billing business, Loida has over 28 years of management expertise in multispecialty clinics with several locations. The Medical Billing Coding Near Me - Team at Agima is now completely under her management. Prior to focusing on medical billing and management, Andrew was a physical therapist by training. He has that uncommon blend of 'know how' in both billing and medicine as a consequence.

As a physician, you undoubtedly already understand how crucial it is to have a capable "behind-the-scenes" crew to keep your practise running smoothly. A well-run practise may often make the difference between a happy and unhappy patient. The Agima management team has more than 50 years of combined experience managing doctor's offices, including in all of the following fields: Human Resource Management, Operations Management, Physician and Staff Recruitment, Practice Review, Scheduling Efficiencies, Scheduling Medical Records, and Vendor management. It's crucial that your practise get every dollar it is due to given that payers are progressively tightening their purse strings. It is one of a practice's most crucial elements since every practise requires a consistent and dependable cashflow in order to exist. Visit us online at http://www.agimamed.com/

[epcysblog]

Full Dental Implants in Turkey: The Ultimate Guide

Benefits of Full Dental Implants in Turkey

Cost-Effectiveness: The price is one of the biggest benefits of having full dental implants in Turkey. Compared to the costs in America, Britain, or other Western nations, patients save up to 70% on dental implant services. Yet, despite the reduced tariffs, care remains superb because of the competitive nature of Turkey’s healthcare system and favorable exchange rates.

High-Quality Care: As a result of this claws glaring display of beauty, the dental service providers earn tremendous respect among Turkish doctors and hospitals who refer Turkish dental clinics for specialized surgeries. Turkish dental clinics employ advanced dental technologies to provide quality services by foreign experts with over 20 years experience. The medical experts also learn new techniques every time they have to visit different countries where there are conferences aimed at increasing knowledge on various regions’ dentistry.

Comprehensive Services: The comprehensive procedure of total dental implants requires several phases: consultation, surgery, healing and final restoration. Turkish clinics provide a complete set of services covering everything that regards this operation. They offer individualized treatment plans, detailed consultations, and thorough aftercare to patients so that they can have a smooth and successful dental journey.

The Procedure for Full Dental Implants

The process of getting full dental implants in Turkey involves several key steps:

Initial Consultation: The journey begins with an initial consultation, either online or in person. During this stage, the dentist evaluates the patient’s dental health, discusses their needs and expectations, and creates a customized treatment plan. X-rays or 3D scans are often taken to assess the jawbone structure and plan the implant placement.

Implant Placement Surgery: Next, we place the implants through a surgical process. This method implies putting metal supports into the bone of the jaw, which act as replacements for natural roots of the teeth. It would take place under local anesthetic or sedation so that it is comfortable and painless for the patient.

Healing Period: Once the implants have been inserted in situ, the osseointegration time of about three to six months is needed for the implants to fuse with the jaws. This step is essential for the stability and durability of the prosthesis. Aesthetics and function can be preserved during this period using provisional teeth or bridges.

Why Choose Turkey for Full Dental Implants?

Turkey has emerged as a leading destination for full dental implants due to several compelling reasons:

World-Class Dental Clinics: Turkish dental clinics are equipped with cutting-edge technology and adhere to international standards of hygiene and safety. Patients can expect a comfortable, modern environment with access to the latest dental advancements.

Experienced Dentists: The country boasts a large pool of experienced and highly qualified dentists. Many Turkish dentists have received training and certifications from prestigious institutions worldwide, ensuring that they are well-equipped to handle complex dental cases.

Positive Patient Experiences: Numerous testimonials and reviews from satisfied patients highlight the success and satisfaction rates of dental treatments in Turkey. Positive word-of-mouth and high patient satisfaction contribute to the country’s growing reputation in medical tourism.

Conclusion

In Turkey, you can undergo complete dental implant surgery at very cheap prices, making it a fantastic solution for people in quest of total mouth rehabilitation. As a result of its low cost, high level of care provided by professionals with extensive experience in addition to a wide range of tourist attractions, hence why Turkey emerges as one of the leading countries when we talk about dental implants. In order to get that beautiful smile and have an unforgettable time in this remarkable country, consider having your dental treatment done in Turkey.

[messungauto]

Finding the Right PLC Supplier: A Guide for Industrial Automation Needs

As an organization, finding the right vendors is always a tough task. Whether it is for services or products, vendors must be reliable, compatible and provide high quality assistance and be by the side of the business from end to end. While finding the right fit can be a struggle, a little bit of effort early on goes a long way. It is always best to conduct thorough research, look at references, case studies and testimonials before settling for any vendor. Remember the right vendor will always be patient throughout the pre-contract period to ensure that the organization they are serving are completely satisfied with everything.

There are several challenges to finding the right PLC. Let's look at them and find solutions to each of them one by one.

Quality speaks for itself

We can all agree that quality is the foremost requirement for any product. But reliability is also crucially important. With PLCs supporting heavy industrial processes, one small glitch can lead to immense losses. Therefore, PLC suppliers must be prompt with troubleshooting, fixing errors and offer solutions to avoid further issues. 

Moreover, before implementing PLC systems within your organization, do a pilot testing. Reliable PLC suppliers like Messung offer pilot tests to ensure the smooth running of operations with complete satisfaction. Ensure the products meet the industry standards and have the relevant certifications.

PLC supplier partners for life

PLCs must be compatible with all industrial requirements so that your vendor is a perfect partner that suits your needs satisfactorily. For packaging and production assembly lines, there is a particular type of PLCs needed. However, for other use cases such as refineries or textile, the PLC requirement is different. So, the very first challenge when looking for the right PLC supplier is making sure that the supplier’s systems are compatible for your industry’s needs.

Before you finalize a PLC supplier, conduct a thorough audit of your own equipment and equipment. Note the configurations of hardware, software, networks etc. This data can be provided to potential suppliers to assess whether their products can fulfil the requirements. Can the supplier provide case studies of providing services to similar configurations? Make sure the supplier provides ample references.

Managing expenses is crucial

Balancing costs is another critical aspect of PLC supplier choice in India. You cannot opt for a cheaper product due to quality concerns. However, building up costs can potentially affect your business. Finding a cost to value proportion can be a tricky challenge to manoeuvre. For the best practice, have a Total Cost of Ownership approach to choosing PLC suppliers in India. Don’t evaluate only the costs upfront but also the long term liabilities such as maintenance, upgrades or repairs.

PLC supplier industry credentials

Coming to the next challenge, you should not only look at the product reliability but also the qualities of the PLC supplier. PLC is not a product that you can purchase and your dealing with the supplier ends there. Organizations need to maintain a relationship with the supplier for further needs that may arise in the future, especially for troubleshooting, repair services etc. Therefore, when choosing a PLC supplier in India, you must ask yourself, is the supplier’s business stable for continuous support? Will the supplier go out of business or discontinue products, leaving your business on the lurch?

Some questions you should address before selecting a PLC supplier in India are: what is the supplier’s reputation in the market? What are the reviews the company has received from users? Are there positive industry testimonials? 

Messung: Your perfect PLC supplier partner

Messung India is a good choice for all your PLC needs because we care about customer satisfaction and reliability. We follow the motto of serving you serves us and so we prioritize your comfort. But don't just take our word for it. Take it from our vast portfolio of clients ranging from various domains and industries. Messung has proven to be a reliable supplier of PLCs in India and we don't just customize solutions for your specific needs, we also have a commendable servicing team who is there 24x7 to take care of queries, troubleshooting, repairs and more. If you are confused about the right PLC supplier for your business, choose Messung India today and ease your worries. We deliver innovation and excellence with reliability and dedication.

[vishantkumar]

CCTV Camera Installation In Muzaffarnagar

Welcome to Gen1 Service, Are you looking for reliable and skilled CCTV camera installation services in Khatauli, Muzaffarnagar? There's no need to look any farther! Our skilled personnel can provide excellent security solutions that are tailored to your particular needs. We are dedicated to ensuring the security and safety of your home, place of business, or other assets and have a lot of industry experience.  Why Choose Us for CCTV Camera Installation in Khatauli? Professional Installation Services: The highly qualified professionals in our team have received training in the newest CCTV technologies and installation methods. We have the knowledge and experience to install and configure any kind of security camera system, no matter how complex or simple. Tailored Security Solutions: We are aware that every customer has different needs when it comes to security. For this reason, we provide specialized CCTV camera solutions made to meet your unique requirements. We make sure that your security system is configured to offer the best possible protection, from choosing the appropriate cameras to placing them strategically for maximum coverage.

Top-Notch Equipment: We exclusively utilize top-notch, dependable CCTV cameras and equipment from well-known manufacturers. HD cameras, night vision cameras, motion detection cameras, and other goods are among our offerings. We ensure crystal-clear video and dependable performance by utilizing cutting-edge technology, giving you total peace of mind. Complete Installation and Maintenance: We offer more than simply installation services. To maintain the optimal functionality of your CCTV system, we provide thorough maintenance packages. We guarantee the continuous efficacy of your security system with routine maintenance inspections and fast repair services.

24/7 service: We are dedicated to providing our clients with round-the-clock service since we believe that security is essential. Our customer care team is ready around-the-clock to help, whether you need assistance with your security system or have a technical problem. We work hard to make sure you get the most security and the least amount of downtime. Our Method: Consultation and Assessment: To determine your security requirements and evaluate the design of your home, we start with a thorough consultation. After talking over your preferences, our specialists will suggest the best CCTV cameras and setups.

Installation: Our specialists will complete the installation procedure with the least amount of interference to your regular routine. We make sure the system is set up properly for smooth functioning and that every camera is positioned to its best advantage. Testing and Training: After the installation is finished, we carry out extensive testing to make sure every camera is operating as intended and offering the required coverage. We also train you and your employees on how to properly operate and maintain the system.

Ongoing Support: After the installation, our cooperation with you doesn't stop. To guarantee that your CCTV system keeps operating at its peak, we provide continuous support and maintenance. Should you want any support, our team is always available via phone. Call us at 9720723118 right now for trustworthy and knowledgeable CCTV camera installation in Khatauli, Muzaffarnagar. Allow us to assist you in improving your security with the finest CCTV products on the market!

[mlmtamilnadu]

Crypto Token MLM Software Development Company

For More Details Please Contact

Call / Whatsapp: +91 9840566115

Website: www.mlmsoftwaretamilnadu.in

MLM Software Tamilnadu,

26, 49th Avenue,

Ashok nagar,

Chennai – 600083

Crypto Token MLM Software Development Company

MLM Software Tamilnadu is among the leading token services. Our experienced team of Blockchain experts assures that your token suits your project’s requirements, thus leading to exponential marketing. Our MLM Software for Multi-Level Marketing business helps to fuel their efficiency and accelerate business growth. Our Direct Selling Software helps you to resolve all your network marketing worries in no time.

Our Multi-Level Marketing software solutions feature advanced scripts, user-friendly interface, and easy-to-comprehend structure to help businesses based on network marketing achieve sales and revenue goals within time.

What Are Crypto Tokens?

The term crypto token refers to a special virtual currency token. These tokens represent fungible and tradable assets or utilities that reside on their own blockchain. Crypto tokens are often used to fundraise for crowd sales, but they can also serve as a substitute for other things.

What is the difference between a crypto coin and a crypto token?

Crypto coins allow individuals to make payments using their digital currency. People can use tokens, though, for many more reasons. They can use them for trading, to hold as a store value, and of course, to use as a form of currency.

Why Crypto Token Development?

It is the massive business prospect increasing the demand for crypto token development. These are the tokens (of value) that give you the right to access any services or product on the blockchain network. From the business perspective, a crypto token is a trending idea which is used to push enterprises and entrepreneurs to launch ICOs.

How Do Crypto Tokens Work?

Crypto coins are comparable to the money you have in a bank account. While you own that amount, the money is not tied to any particular dollar bill or coin. It’s when you withdraw from your account that you get a tangible representation of that value. On the other hand, tokens are “owned”, and each is an individual asset that you own.

If you send a token to someone, it “leaves” your account and moves to another person’s account. This is why tokens can also signify ownership or facilitate exchanges in property, such as with “non-fungible” tokens.

Blockchain Based MLM Software

Blockchain, with decentralization brings potential solutions to the pain points that can hold back the best of MLM projects, by ensuring the following:

Trust: Encourages the users to participate with confidence and benefit while being assured of complete transparency.

Transparency: All transactions are recorded on a distributed ledger that is accessible to everyone on the network.

Immutability: Owing to immutable smart contracts, companies cannot make any changes to their system once it has been defined, even if they want to.

Accelerated transactions: Total automation reduces the need for human-based operations and results in real-time transactions.

Token Lending MLM System

Token lending MLM system provides a well-secured token that holds the value of a specific asset which can be traded, exchanged and sold etc. Enable your business with more secure and transparent process flow. The transparency and immutability of the crypto tokens help a business to quickly gain trust in the market.

Main usage of Cryptocurrency in MLM

Bitcoin is not a real coin but actually a digital currency that has potential to transform the business landscape. This decentralized cryptocurrency provides distributed monetary transactions without any support from a third party. It is due to the complex features of today’s trading that we need third parties like financial institutions, governments, banks and notaries to assist users with financial affairs. Cryptocurrency surpasses this intermediary job of third parties and offers users with a suitable medium for the transactions between the two parties. E-currency platforms are used throughout the world for its many benefits that it offers. Some of the benefits of using cryptocurrency are:

Decentralized:

User-friendly

Safe:

Nominal Cost

Benefits of integrating crypto currency Bitcoin in MLM Software

No Risk of charge – back- Eliminate the chances of charge – back.

No risk of payment fraud- You can purchase your services without entering any sensitive financial information.

No transaction cost- It directly transfers from sender to receiver and thus no middle man is required.

No tracking possible- It has greatly increased privacy when compared to the traditional currency system.

Where do crypto-tokens stand legally?

The legal classification of ICOs and crypto-tokens remain murky and a point of contention. They borrow traits from both IPOs and traditional crowd-funding, while at the same time they bear enough difference to avoid fitting into any of those categories.

[cryptosoftmalaysia]

Crypto token MLM Software Development Company

For More Details Please Contact

Call / Whatsapp: +60 16-499 8736

Website: www.cryptosoftmalaysia.com

Unit3, Level 22,

 The Gardens South Tower,

 Mid Valley City,

59200

Kuala Lumpur

Crypto token MLM Software Development Company

Crypto Soft Malaysia is among the leading token services. Our experienced team of Blockchain experts assures that your token suits your project’s requirements, thus leading to exponential marketing. Our MLM Software for Multi-Level Marketing business helps to fuel their efficiency and accelerate business growth. Our Direct Selling Software helps you to resolve all your network marketing worries in no time.

Our Multi-Level Marketing software solutions feature advanced scripts, user-friendly interface, and easy-to-comprehend structure to help businesses based on network marketing achieve sales and revenue goals within time.

What Are Crypto Tokens?

The term crypto token refers to a special virtual currency token. These tokens represent fungible and tradable assets or utilities that reside on their own blockchain. Crypto tokens are often used to fundraise for crowd sales, but they can also serve as a substitute for other things.

What is the difference between a crypto coin and a crypto token?

Crypto coins allow individuals to make payments using their digital currency. People can use tokens, though, for many more reasons. They can use them for trading, to hold as a store value, and of course, to use as a form of currency.

Why Crypto Token Development?

It is the massive business prospect increasing the demand for crypto token development. These are the tokens (of value) that give you the right to access any services or product on the blockchain network. From the business perspective, a crypto token is a trending idea which is used to push enterprises and entrepreneurs to launch ICOs.

How Do Crypto Tokens Work?

Crypto coins are comparable to the money you have in a bank account. While you own that amount, the money is not tied to any particular dollar bill or coin. It’s when you withdraw from your account that you get a tangible representation of that value. On the other hand, tokens are “owned”, and each is an individual asset that you own.

If you send a token to someone, it “leaves” your account and moves to another person’s account. This is why tokens can also signify ownership or facilitate exchanges in property, such as with “non-fungible” tokens.

Blockchain Based MLM Software

Blockchain, with decentralization brings potential solutions to the pain points that can hold back the best of MLM projects, by ensuring the following:

Trust: Encourages the users to participate with confidence and benefit while being assured of complete transparency.

Transparency: All transactions are recorded on a distributed ledger that is accessible to everyone on the network.

Immutability: Owing to immutable smart contracts, companies cannot make any changes to their system once it has been defined, even if they want to.

Accelerated transactions: Total automation reduces the need for human-based operations and results in real-time transactions.

Token Lending MLM System

Token lending MLM system provides a well-secured token that holds the value of a specific asset which can be traded, exchanged and sold etc. Enable your business with more secure and transparent process flow. The transparency and immutability of the crypto tokens help a business to quickly gain trust in the market.

Main usage of Cryptocurrency in MLM

Bitcoin is not a real coin but actually a digital currency that has potential to transform the business landscape. This decentralized cryptocurrency provides distributed monetary transactions without any support from a third party. It is due to the complex features of today’s trading that we need third parties like financial institutions, governments, banks and notaries to assist users with financial affairs. Cryptocurrency surpasses this intermediary job of third parties and offers users with a suitable medium for the transactions between the two parties. E-currency platforms are used throughout the world for its many benefits that it offers. Some of the benefits of using cryptocurrency are:

Decentralized:

User-friendly

Safe:

Nominal Cost

Benefits of integrating crypto currency Bitcoin in MLM Software

No Risk of charge – back- Eliminate the chances of charge – back.

No risk of payment fraud- You can purchase your services without entering any sensitive financial information.

No transaction cost- It directly transfers from sender to receiver and thus no middle man is required.

No tracking possible- It has greatly increased privacy when compared to the traditional currency system.

Where do crypto-tokens stand legally?

The legal classification of ICOs and crypto-tokens remain murky and a point of contention. They borrow traits from both IPOs and traditional crowd-funding, while at the same time they bear enough difference to avoid fitting into any of those categories.

[electricautoset]

Electric Auto Set Motor

Take Into Consideration an Auto Set Clock Motor

An auto collection clock motor changes immediately for sure time-changing policies, most significantly daylight savings time, whether the regulations be localized or pertain to one's particular time zone. The auto collection clock electric motor is created to cost-free people from the fears of resetting wrist watches by hand, despite their place on the globe. In short, the goal is completely totally free upkeep.

The auto collection clock electric motor needs to be calibrated for the buyer's place of residence so that the moment it reports conforms to the governmental requirements stated for that country and time zone. The calibration happens at the manufacturing facility, and it consists of a program that runs in the background to accomplish time changes on stated days and by specified quantities (normally one hour, but sometimes a half-hour). When the area doesn't observe shifts that occur in other places or around the world, the timepiece marches on obliviously.

This sort of automation is not completely brand-new, mirroring a long-lasting inconvenience by several at the semi-annual daytime savings disruptions and their desire for relief. Manually altering the time has long been viewed to be a required wickedness. Possibly the most effective to-date automated solution to be developed is the atomic clock standardization, including a master cesium appear Ft Collins, Colorado, and "servant" watch motions that automatically sync to the master.

The synchronization is completed by means of radio waves, with the master in Colorado informing the distributed clocks whenever a time adjustment occurred. The physical action to the alert was challenging, needing the activity to hamper hand rotation in the autumn (fall back) for however lengthy it took to elapse the "shed" hour. The vernal (springtime onward) feedback included accelerated hand rotation, which obviously could not be achieved close to instantaneously either.

Regardless of the awkwardness, the system was generally reliable, the only drawback being occasional radio interference arising from random use of devices, power devices, and dimmer switches. When such interference coincided with the radio broadcast, daytime change really did not happen. Really, much more problematic are solar geomagnetic storms, which take place regularly and in no other way can be controlled.

Not giving up on the idea, makers transformed their interest to establishing the auto collection clock motion, or motor. The concept was to center control to the timepiece itself and to have it keep track of its own time zone and nationwide time-change regulations. A watch geared up with this activity has actually been referred to as a "world clock" because it can be configured to run in any of the extant 26 time zones on earth.

Departing from the autumn operation of the atomic clock movement, the suppliers just had the programmable chip stop hand rotation completely for the duration of the contingency (usually one hour, however often a half-hour). In the spring, the motor turning was quickened by a factor of 10, completing the hour shift onward in six mins.

Similar to many modern-day activities, the auto set clock electric motor is battery powered, running on a solitary AA cell. The special chip also needs power, though low-voltage, and is equipped with its own power source. This duality allows the chip's battery to power the motion while the AA cell is changed, preventing loss in precision.

In some old flicks and television information shows the viewer can see a financial institution of clocks, each revealing the current time in a different location. This brand-new gadget we have actually been reviewing is excellent for replicating such a setup, as one requires only to set as much as 26 copies for full globe insurance coverage. In addition, as time changes take place otherwise with the year, all adjustments would be shown immediately. clock parts

We have actually talked about how technology has progressed to the point of achieving worry-free timekeeping adjustments for daylight financial savings. For your next watch, take into consideration an auto set clock electric motor.

[levaajemsan]

Small Businesses Software

The best invoicing software for your small business depends on various factors, such as your business size and type and your needed pricing, ease of use, and features. For most businesses, we recommend choosing a solution that lets you create customizable invoices and has enhanced features, such as recurring invoices, payment links, billing realization tracking, and a mobile invoicing app - online restaurant management software.

Traditional invoicing software usually necessitates regular upkeep and updates, which might add to the general value burden for small businesses. These updates may require additional training or professional help, resulting in additional bills. Our invoicing options include turning quotes into invoices in a single click and automated alerts that inform you of any late payers. We also offer many other free bookkeeping templates, including cash e-book, petty cash, money flow, finances and business expenses.

As a small enterprise creating and tracking invoices could be time-consuming and expensive should you get it mistaken. Invoice Ninja allows small companies to optimize their invoicing process. A key characteristic of Invoice Ninja is that customers can arrange recurring payments for purchasers. Products classified in the overall Billing category are similar in many regards and help companies of all sizes solve their business problems. However, small business features, pricing, setup, and installation differ from businesses of other sizes, which is why we match buyers to the right Small Business Billing to fit their needs - free restaurant billing software.

We present completely different ranges of assistance for purchasers who use totally different features and providers. The best restaurant point-of-sale software program helps eating places improve their day-by-day operations, which instantly impacts income and customer support satisfaction. The restaurant point-of-sale software program is an end-to- end solution, which simplifies the administration of restaurant operations. The software program routinely generates accurate monetary statements, making it simpler for you to analyze your restaurant’s performance. This is a restaurant management app and EPOS system that harnesses the facility of mobile to speed up restaurant providers. Expect all the essential contains a restaurant, catering business, brewery, or event venue. For more information, please visit our site https://billingsoftwareindia.in/restaurant-billing-software/

[pmmechanicalny5fa]

PM Mechanical

P&M Mechanical, Inc. was among the first HVAC firms in Westchester and Fairfield counties back in 2000. The moment you switch on the air conditioner, the issue will go away.

hvac contractors near me

Among the most vociferous advocates are well-known energy companies like Con Edison and Eversource. hvac contractors near me The number of houses that have thermostats that are favorable to the environment is growing.

Would you like a security system installed? When it comes to contacting P&M Mechanical, Inc., time is of the essence. Regardless of the cost, we will see the project through to its completion.

There are three different maintenance plans to choose from; select the one that best fits your needs and budget.

It might make sense to stock up before costs go up even further. My identity will be significantly impacted by it. Try out a variety of strategies until you find the one that works best for you. You can save the most money if you purchase all three of these things at once.

Maintain the highest level of efficiency in the plumbing, electrical, and HVAC (heating, ventilation, and air conditioning) systems. If you have any plumbing, HVAC, or related problems, you can get in touch with us at any time of day or night. At P&M Mechanical Inc., located in Port Chester, New York, customers come first. We are always available due to our office's handy location in Port Chester, New York.

Here, our needs are totally disregarded. Doctors and dietitians are well aware that many CEOs adhere to extremely strict feeding regimens. Possessing an abundance of fresh concepts at one's disposal is a praiseworthy attribute. We take great pride in being a small, family-run business that has always offered only the best products.

Until we have fulfilled our highest goals and pleased all of our stakeholders—especially our clients—we won't stop. Saying what's on your mind is not going to get you anywhere. Please don't hesitate to contact us if you ever find yourself in a financial jam and could require our aid.

The HVAC companies in Connecticut and New York were first-rate, but I haven't heard anything regarding a decision as of yet. Always keep your hold firmly. You can obtain property insurance if you reside in Connecticut or New York or operate a business there. We provide almost all types of HVAC systems in stock. Ensuring adequate space would be a vital part of the planning process between the property and its neighbors. We were much more committed to meeting customer wants after bringing in HVAC specialists. Since time is of the essence, we won't stop until we've looked into every avenue. Your HVAC system can be installed, serviced, repaired, or diagnosed by our qualified technicians, regardless of its brand or model. I'd venture to guess that the majority of Americans have never entered a climate control room, even if only a small number of Connecticut residents have actually done so. Our services will protect your home from every storm, regardless of the type that hits your community. Why? Remain inside till the weather gets better. What the weather brings is not important. Whatever the weather in New York City throws at us, our knowledgeable technicians can quickly repair the air conditioning system in any building. It is up to you to confirm that your air conditioner is reliable. Maintaining a temperature that is comfortable requires air conditioning.

Heating company near me

Many happy customers in the New York and New Jersey areas can attest to the excellence of our HVAC services. With these additional facts, we should have no trouble finishing the assignment on schedule. Our success stems from our ability to quickly exceed our clients' expectations. No matter how big or small the work, we can handle it. This agreement will be fiercely defended in the event that it is ever contested in court. You'll have to demonstrate your worth somehow. All of our efforts will be in vain if we are not united and steadfast in our commitment to our objectives.

Our company is the one to call if you live in Connecticut and need information on HVAC systems. Our support team is available to assist you with any questions or problems you may have at any time of day or night. Our Connecticut HVAC firm has a stellar reputation because we cherish every single customer. Right now, our only goal is to obtain one of the fifty states. Are you in need of a trustworthy HVAC technician? New York City is where you ought to be. The HVAC system may need to be fixed or replaced if the issue persists. Are you having problems finding a reliable HVAC expert in the New York, Connecticut, area? For further information, get in contact with P&M Mechanical Industries, Inc. Please don't hesitate to contact us if you ever need a professional HVAC service. You can always get help when you need it.

Leading utilities like Con Edison and Eversource are some of the most vociferous advocates. The number of houses that have thermostats that are favorable to the environment is growing.

[mlmtamilnadu]

Crypto Token MLM Software Development Company

For More Details Please Contact

Call / Whatsapp: +91 9840566115

Website: www.mlmsoftwaretamilnadu.in

MLM Software Tamilnadu,

26, 49th Avenue,

Ashok nagar,

Chennai – 600083

Crypto Token MLM Software Development Company

MLM Software Tamilnadu is among the leading token services. Our experienced team of Blockchain experts assures that your token suits your project’s requirements, thus leading to exponential marketing. Our MLM Software for Multi-Level Marketing business helps to fuel their efficiency and accelerate business growth. Our Direct Selling Software helps you to resolve all your network marketing worries in no time.

Our Multi-Level Marketing software solutions feature advanced scripts, user-friendly interface, and easy-to-comprehend structure to help businesses based on network marketing achieve sales and revenue goals within time.

What Are Crypto Tokens?

The term crypto token refers to a special virtual currency token. These tokens represent fungible and tradable assets or utilities that reside on their own blockchain. Crypto tokens are often used to fundraise for crowd sales, but they can also serve as a substitute for other things.

What is the difference between a crypto coin and a crypto token?

Crypto coins allow individuals to make payments using their digital currency. People can use tokens, though, for many more reasons. They can use them for trading, to hold as a store value, and of course, to use as a form of currency.

Why Crypto Token Development?

It is the massive business prospect increasing the demand for crypto token development. These are the tokens (of value) that give you the right to access any services or product on the blockchain network. From the business perspective, a crypto token is a trending idea which is used to push enterprises and entrepreneurs to launch ICOs.

How Do Crypto Tokens Work?

Crypto coins are comparable to the money you have in a bank account. While you own that amount, the money is not tied to any particular dollar bill or coin. It’s when you withdraw from your account that you get a tangible representation of that value. On the other hand, tokens are “owned”, and each is an individual asset that you own.

If you send a token to someone, it “leaves” your account and moves to another person’s account. This is why tokens can also signify ownership or facilitate exchanges in property, such as with “non-fungible” tokens.

Blockchain Based MLM Software

Blockchain, with decentralization brings potential solutions to the pain points that can hold back the best of MLM projects, by ensuring the following:

Trust: Encourages the users to participate with confidence and benefit while being assured of complete transparency.

Transparency: All transactions are recorded on a distributed ledger that is accessible to everyone on the network.

Immutability: Owing to immutable smart contracts, companies cannot make any changes to their system once it has been defined, even if they want to.

Accelerated transactions: Total automation reduces the need for human-based operations and results in real-time transactions.

Token Lending MLM System

Token lending MLM system provides a well-secured token that holds the value of a specific asset which can be traded, exchanged and sold etc. Enable your business with more secure and transparent process flow. The transparency and immutability of the crypto tokens help a business to quickly gain trust in the market.

Main usage of Cryptocurrency in MLM

Bitcoin is not a real coin but actually a digital currency that has potential to transform the business landscape. This decentralized cryptocurrency provides distributed monetary transactions without any support from a third party. It is due to the complex features of today’s trading that we need third parties like financial institutions, governments, banks and notaries to assist users with financial affairs. Cryptocurrency surpasses this intermediary job of third parties and offers users with a suitable medium for the transactions between the two parties. E-currency platforms are used throughout the world for its many benefits that it offers. Some of the benefits of using cryptocurrency are:

Decentralized:

User-friendly

Safe:

Nominal Cost

Benefits of integrating crypto currency Bitcoin in MLM Software

No Risk of charge – back- Eliminate the chances of charge – back.

No risk of payment fraud- You can purchase your services without entering any sensitive financial information.

No transaction cost- It directly transfers from sender to receiver and thus no middle man is required.

No tracking possible- It has greatly increased privacy when compared to the traditional currency system.

Where do crypto-tokens stand legally?

The legal classification of ICOs and crypto-tokens remain murky and a point of contention. They borrow traits from both IPOs and traditional crowd-funding, while at the same time they bear enough difference to avoid fitting into any of those categories.