vinaykumar-g-blog

[vinaykumar-g-blog]

What is a Fire Alarm? How Fire, Smoke, Heat detection Systems Works?

A fire alarm system is used to detect and identify fire or fire in the building, fire alarms warn the peoples of the building about fire via a sound alarm. The main components of fire alarms are smoke detectors, heat detectors, gas detectors, manual call points also called ‘break glass’ a when a person detects a fire he can manually raise an alarm, bell or alarm sounders. The main advantage of fire alarms is an early warning, it has a capacity to save life and property, it has low cost and fire alarms can be placed in a preferred location.

Now a day’s fire alarm systems are of smart sensors, intelligent control panel, and integration with other building services.

Fire alarm is to detect fire and convert into electrical signal can operate the alarm.

When a fire occurs then the alarm system sends pulses through electrical circuits to the control panel to run optical and sound signals. The optical signal indicates.

 Types of Fire Alarms Systems

There are two types of fire alarm systems are there they are

1.      Manual fire alarm systems

2.      Automatic fire alarm systems

 Manual fire alarm systems:

This system works manually by a person pressing an alarm button. Manually call points are shared in all building sections. The alarm is processed by breaking the glass cover so that the signal is sent to the control panel.  Fire alarms combine with the second electrical sources with the main source so the devices work in case of main source breaks.

Map of alarm devices share inside the building next to the main entrance because easy to identify the place of fire.

 Automatic fire alarm systems:

Fire alarms can be used in places and halls where the occurrences of fire incidents are more. These systems operate by detecting the flames or heat. This system is automatic no need to depend on the human regarding operations. This system can detect fire in no time and reducing the size of damages.

 Components of Fire Alarms System:

There are four components are there they are

1.      Sensors

2.      Controllers

3.      Alarms

 Sensors:

Sensors are of different types and they are

 Smoke Detector:

Smoke the detector works based on the optical rays. If there is a fire incident occurs, Smoke rises and crosses the optical ray then the alarm works. The distance between each detector should not be more than 7.5 meters.

 Heat Detector:

Heat the detector works based on a heat sensor. When the temperature rises due to fire then the alarm works. The distance between each detector should not be more than 5.5 meters. There are two types of heat detectors they are which work at 60 C degree which is used in most of the applications and another one works at 90 C degree which is used in generator rooms.

Smoke detectors are better than heat detectors. Heat detectors are mostly used where smoke is normally such as Kitchens and parking garages.

 Multi-Sensor:

Combination of smoke detector and heat, the detector is called Multi-sensor detector and this type of detector is more expensive in price, but it gives better results. Multi sensors work as an alternative to smoke detectors.

 Beam Detectors:

Beam detectors are placed 5 meters high, it is the most expensive type which consists of transmitter and receiver. The receiver simply reflects the signal from the transmitter and receiver, then the alarm works. There are two types of beam detector they are 1) the distance between transmitter and receiver should not exceed 50 meters. 2) The distance between the transmitter and receiver should not exceed 100 meters.

Beam the detector should be installed on the highs from 6 meters to 10 meters and if the beam detector height is more than 10 meters then it won’t work when there is a fire.

 Controllers:

Controllers are mediators between sensors and alarms. Every controller has Fire Alarm Control Panel (FACP). FACP consists of Monitor, PCB, and Battery. The monitor is to view the options and information. PCB is Printed circuit boards is an Input/output Electronic board. The battery is used to extend when the main power cut. The fire alarm system will work even when the power cuts.

There are two types of controllers are there they are conventional and addressable type.

 Conventional Type:

Conventional type is the open-loop system it cannot detect fire in a room instead it will detect zone wise which consists of more than a room. For example, a building is divided into zones each zone consists of some rooms. If there is a fire in a room the controller cannot detect the room but it detects the only zone which contains the room. This type is less expensive.

 Addressable Type:

Addressable type is a closed-loop system where it can detect fire in a room in any zone in the building. For example, a building is divided into some zones, every zone consists of a room and every room contains address. If any fire incident occurs in a room controller can detect the room because the address of the room appears on the controller monitor with the help of a microprocessor. This type is more expensive.

 Alarms:

There are two types of alarms are there they are sound alarm and sound and light alarm. The sound alarm sounds like a bell, horn and like sirens. The light alarm is a strobe the light which lights like flash of the camera.

 Conclusion

A fire alarms system is used to detect the fire and smoke. The fire alarm operates to alert people to leave the location where fire or smoke incident occurs and fire alarm will sound to notify the people to alert from the fire incident. Fire alarms can be used in homes, schools, churches and businesses and functions as a catalyst to saving lives. Many alarms sound like beep, horn, bell, and siren.

Brihaspathi provides fire alarm systems in Hyderabad to help People by saving their lives and properties. Brihaspathi trade-in sales and supply of latest and innovative fire alarm system Hyderabad. Each fire alarm system provides complete protection against fire incidents. Each fire alarm is designed to meet the specifications and fit small to large organizations. Brihaspathi Fire Alarm System Suppliers in Hyderabad offer advanced, intelligent and addressable fire control features.

Our experience with different clients tells us that, choosing the right fire protection solution means to guarantee complete protection for the facility. We are the best in providing fire alarm system in Andhra Pradesh and we provide fire control systems, and we supply supporting equipment that helps in emergency power shutdown management, and intrusion detection system.

[vinaykumar-g-blog]

What is IP PBX? Complete guide to VOIP Servers and IP PBX Systems

IP acronym is Internet Protocol and PBX acronym is Private Branch Exchange. IP PBX system acts as a central switching system. An IP PBX is a system that can route and switch calls between the telephone network and VOIP users. This system can route many calls at the same time. Its planning allows the user to share limited resources.

A traditional PBX consists of two main elements they are lines and stations. The main aim of PBX is to provide shared access to limited resources. Instead of having a separate phone line for each phone an organization can share a small pool of lines across a much larger pool of stations. If a call comes first it connects to the operator then the operator connects it with a related person or department. This early system was simply called switchboards.

Operators were replaced with electromechanical and later electronic systems for manage access to lines. Some of the features added that can route calls between stations and to connect or disconnect the calls based on rules.

Now a day, a business phone system has more features upon the simple switch. Adjunct technologies like automated attendance, voice messaging, call queuing, multi-part conferences are the standard features. Analog and digital phones are giving way to standards-based IP phones.

When PBXs were developed wireline calls are the way of electronic communications available. Today communication can be done in different types including email, instant messaging, video conferencing, desktop sharing, SMS and mobile telephony. Unified communication is a process of merging all of these technologies and applying them with the business process. Hence unified communications are to increase efficiency while simplifying management.

 Traditional IPPBX System

In the earlier days, PBX is of a switchboard operator. A lady sitting in front of a big circuit board transfers the calls by plugging wires into different sockets.

The first switchboard was invented in the late 1800s after the telephone itself was invented. In the earlier days, each person in an office had a phone line. The operator lifts the call and forwards the call to your line.

In the 1970’s call switching was automated. No need a lady to connect the calls it’s totally automated. Hence business became more efficient. More organizations showed interest to buy business telephone systems. Technology got better. In the 1990’s automated phone, systems are used by the maximum companies. At this time industries started using the word “PBX”.

Today PBX systems have been used most of the business. When we call to any business always had to press 1 to speak to a representative or press 2 for our address? Yes. That’s a PBX. Now a day there are many IP PBX system suppliers, IP PBX service provider, and IP PBX System Distributors are there.

 Standard IPPBX Features

Internal connecting calls

External connecting calls

Switching calls between users

Calls stay connected without hang-up

Ending calls when the user's hang-up

Call Recording

Keeping track of data related to calls

Automatic call distribution

Call answering in an automated process

Call queue

Customize Call hold music or include messages

Voice messaging

Transfer calls

 Traditional PBX vs. IP PBX

An IP PBX improved by PBX that helps the VOIP system.

Traditional IPPBX systems are of hardware. IP PBX systems are of software. IP PBX system works with packet-switched networks. IP PBX system can handle voice calls, data, video calls, and can link up with applications like outlook

IP PBX has two benefits:

We can arrange a backup IP PBX server; if any problem exists it will switch to another service to maintain the flow of business.

Virtual PBX can be run on the same servers as other business in virtualized data centers for better ROI.

VOIP is a technology that users can make a call using internet protocol instead of the traditional phone line.

 Unified Communications

The IP PBX makes unified communications. Unified communications are used to communicate with in the organizations. This includes voice calls, video calls, SMS and chat, data sharing, extension mobility.

Unified communications allow users to communicate on different mediums within the same network.

 IP PBX Working Process

For each user VOIP assigned a unique identifier. This identifier is an email address that is the user's SIP address. IP PBX keeps a list of all users and SIP addresses.

When you make a call on the VOIP phone, the IP PBX decides it’s internal or external call.

If it is an internal call, the PBX sends your call to the SIP address of the person you dialed. Both of you are using VOIP, your call stays on the network and cannot access outside phone line.

If it is an external call, PBX sends your call to the VOIP service provider and then sent on an external phone line. It’s allowing users to get together on conference calls and it allows sending voice mails to emails. There are some important points of IP PBX they are Maintenance is simple just plug a VOIP phone and can use it. By using a VOIP PBX scale your business fast and reliable. Using IP PBX we can save money.

 Types of IP PBX

There are two types of IP PBX are there they are On-Premise PBX and Hosted/Cloud PBX.

 On-Premise PBX

High Setup cost

Minimal recurring cost

Maintenance is done at your site by IT Professionals

Day today involvement with your IT team

When there is no power can cause complete loss of phone service

Only one location no remote workers

Requires in advance capital to get started

Business requires space for equipment

 Hosted/Cloud PBX

Low Setup cost

Low recurring subscription costs

Maintained by the service provider at their data center

No involvement with your IT team

When there is no power calls can be re-routed by the service provider

Multiple location or remote workers

Requires little to no capital to get started

Equipment is not stored on-site

 Conclusion

Hosted PBX is a great option for smaller companies that do not have the infrastructure but want to manage their communication. You can host your 3CX PBX in your own cloud an account such as Google, Amazon, and Azure.

On-Premise PBXs are mostly suited for large organizations that should have a nice infrastructure and resources to run and manage the phone system and in different zones that require security and confidentiality.

The on-premise system gives more benefits to the organizations rather than cloud solutions.

Brihaspathi is IP PBX service provider in Hyderabad wants to help users for the best choice. We explain different types of option that are suited to grow your business and we are the Best IP PBX system dealers in Hyderabad and make a solution which is right for you.

Brihaspathi IPPBX provider in Hyderabad solves the problem which you have and provides a solution to grow your business. We make your business to the next level.

We are IP PBX system dealers in Hyderabad want to help you regarding options available in IP PBX systems. We can meet the needs of any business, from small businesses to large organizations.

Brihaspathi IP PBX Phone systems provider in Hyderabad provides amazing services and our clients tell us that we are doing a great job. Positive reviews make us work harder. We make your business to increase efficiency and profit.

[vinaykumar-g-blog]

Brihaspathi provides the End-End ERP Software solutions in Hyderabad, it Handle's the all your business needs with one powerful ERP solution. Ph: 9581234499

[vinaykumar-g-blog]

Human Resources Management System is the simple & effective online system that provides employer everything accurately & also provide the Payroll Management system.

[vinaykumar-g-blog]

Brihaspathi Technologies deals in the sales and supply of the latest and innovative fire alarm systems in Hyderabad.ph no: 9581234499

[vinaykumar-g-blog]

Looking for IP PBX dealers in Hyderabad then you are at the right place. Brihaspathi the best VoIP service providers in India, Hyderabad offers wide range of IP PBX (Private Branch Exchange) Systems that switches calls between VoIP (voice over Internet Protocol) and allowing users to share a certain number of external phone lines.