Don't wanna be here? Send us removal request.
Text
What problems have been solved by 3D assembled heavy + Light Steel Villas?
First: Quality problems
The structural parts used are all made of heavy Iron and Steel + hot-dip galvanized steel plate. The welding technology is used in heavy Iron and Steel Structure. The self-tapping screw is used in the installation and assembly of EPS wall. The welding technology is not used to effectively protect the integrity of zinc film, so the corrosion resistance is excellent. EPS wall will not corrode, mildew and moth, the service life of buildings can reach more than 70 years.
2. Heat preservation and insulation
Through the combination of heavy steel structure, light steel skeleton and EPS thermal insulation board, 3D assembled Chonggang + light steel villas have formed a composite wall system with good performance and composite roof system, which has good thermal insulation effect. If there is a special requirement for thermal insulation in the area, we can increase the thermal insulation materials, such as adding an extra layer of Extrusion board in the northern area, the thermal insulation effect is better.
The traditional brick-concrete has high heat transfer, general heat preservation performance and high energy consumption.
Third: Quality Assurance
The support and combination of the auxiliary parts play a reasonable bearing capacity. In addition, steel-structured buildings have been in existence for hundreds of years, and steel-structured houses appeared in the United States in 1900. The norm was established in 1976 and has been in use until today. So the development of 3D assembled Chonggang + light steel villas has been quite mature up to now, but the introduction of domestic time is relatively short, leading to insufficient understanding.
Compared with traditional buildings, the use area of 3D assembled Chonggang + Light Steel Villa is 18% higher than that of traditional buildings. It is fast to install, rich in style, recyclable waste, small error of prefabricated main components and low comprehensive cost.
IV: Waterproofing
Foundation: laying thick moisture-proof film;
Ground: Brush double-layer waterproof asphalt, place light steel structure with black waterproof membrane for waterproof;
Wall: Moisture-proof breathing paper (waterproof breathable) is installed to ensure excellent waterproof wall, and has the performance of adjusting indoor relative humidity. The eaves are picked out from 300 mm to 600 mm, and the water is directly drained. There are special water supply and drainage pipes.
Roof: Waterproof roll material is made on the whole surface, and the eaves are specially waterproof. Glass fibre cotton is placed inside the roof, which plays a role of heat preservation and insulation. Asphalt tile is a kind of tile with better waterproof in the world at present. Water drops directly along the asphalt tile. It can achieve 360 degree moisture-proof and waterproof treatment.
Traditional buildings have no overall moisture-proof measures and poor air permeability.
Fifth: Anti-rust, Anti-insect and Ant Problems
As far as rust prevention is concerned, Chongqing Steel and special galvanized light steel are used as the structural framework. The anti-rust treatment of Chongqing Iron and Steel Co. is carried out in accordance with the North American international standards. Double-sided hot-dip galvanizing is 275g/. Domestic zinc plating requirements up to 120 g/can not rust for decades, let alone our zinc plating standards are more than twice the domestic level. Many experiments in Japan have proved that galvanized steel exposed to the outside is stainless for more than 100 years.
As far as insect control is concerned, the 3-D assembled heavy steel + light steel structure adopts galvanized steel, and the maintenance plate is not eroded by termites and other insect pests.
VI: Sound insulation effect
Sound is a kind of wave, which needs medium to transmit. Transfer, reflection and absorption occur at the interface of the medium. Three-dimensional assembled heavy steel + light steel villa + EPS wall is a composite wall system, which passes through multiple media of different densities in the process of sound transmission, greatly reducing the frequency of sound wave transmission.
Seventh: Ground Warming and Water Leakage
Ground heating is the same as traditional brick mixing. Waterproofing treatment includes roof waterproofing: roof waterproofing material, asphalt tile itself has waterproofing performance, and an important node layer, equivalent to three layers of waterproofing; exterior wall waterproofing is moisture-proof breathing paper. Generally, there is little leakage. If it does, we will have after-sales service.
Eighth: gale problem
The special "plate rib structure" of 3D assembled heavy steel and light steel villas can effectively bear horizontal loads, and at the same time, a large number of pull-out parts are used to make the whole building and foundation connected reliably. Long tie rods and shear connectors are also used to connect the floor to the floor and between the floor and the roof to ensure the overall safety and stability of the building. Although the three-dimensional assembled heavy steel + light steel structure is light, but a house with at least a few tons of heavy steel + light steel, plus external panels and EPS walls, a house at least tens of tons of hundreds of tons, is not so easy to be blown away by the wind.
Nine: Stability
The main structure of 3D assembled heavy steel and light steel villas is heavy steel+high strength and high galvanized keel structure system, which is connected by high galvanized bolts to form a flexible structure. When natural disasters (such as earthquakes, tsunamis, typhoons, etc.), it can instantly unload external forces, release huge external forces, and shear or deformation of buildings. Stress, to ensure the overall safety of the building, even if larger earthquakes, typhoons lead to house collapse, deformation will form a flexible support space to protect the safety of life and property. EPS plate wall not only has good integrity, but also avoids secondary damage to human body caused by collapse of gas structure.
However, the realization of long-span in traditional buildings is enough to consume materials, and the form is single.
Ten: Natural Disasters
In the face of natural disasters such as thunder and lightning, mountain torrents and hurricanes, the design and construction of 3D assembled heavy steel and light steel villas conform to the requirements of architectural design and construction, and also meet the building requirements on such issues as earthquake resistance and typhoon resistance; under the influence of other force majeure factors (such as war, mountain torrents, debris flow, etc.), the same is true. No type of building can be guaranteed. Note: 9 magnitude earthquake, 70 m/s hurricane, the whole 3D assembled heavy steel + light steel villa building and foundation connection, the overall structure is a good lightning protection system. Traditional houses need to be covered with galvanized lightning rods, and 3D assembled heavy steel + light steel villas are closely connected with the ground to form a complete lightning protection system. There is no need to take special lightning protection measures for 3D assembled heavy steel + light steel villas. First, the metal shell can shield the internal electric field, which is a physical knowledge. Secondly, the whole material is not exposed to the outdoor, outdoor decorative materials are insulating materials, will not conduct electricity. Lightning rods can be installed if you are not at ease.
Traditional buildings belong to brittle structures, which are seriously damaged under the influence of earthquakes.
11: Self-decoration
Owners can do their own decoration. When the house is completed and delivered, we will hand over the "Instructions for Use" to the owner. This document covers the special requirements and precautions of the interior, so as to ensure that the subsequent decoration goes smoothly.
Villas can be decorated by themselves. For decoration, there are no special requirements, and the traditional decoration method is consistent. There is no special need for attention, because the interior wall EPS board, the quality of the board is hard and flat, can be directly decorated with wall cloth, ceiling and traditional home decoration can be the same material.
Decoration can save half or more construction time than traditional buildings.
However, the construction period of traditional buildings is long, and it can not be constructed in cold areas in winter, which is limited by the environment.
Technology and environmental protection of the 3D assembly type Chongqing Iron and Steel + light steel villas will be popular, in addition to a variety of natural environments throughout the country, but also fully in line with the national concept of green environmental protection, so in the suburbs and rural areas, more and more people choose low-cost and high-quality 3D assembly type Chongqing Iron and Steel + light steel villas.
In order to conform to the development trend of international construction industry and respond to the policy requirement of vigorously advocating green building, Xiamen Shinejoy have always taken the concept of "green, environmental protection and high efficiency" as their enterprise development concept, innovated the construction production mode in an all-round way by means of industrialized manufacturing, improved the quality and efficiency of construction, and practised resource saving and low carbon emission reduction for customers. Provide the overall solution of green building, devote to promoting the comprehensive innovation and sustainable development of China's construction industry, and realize the double harvest of economic and social benefits of enterprises.
As an idealistic enterprise full of humanistic color, Xiamen Shinejoy always grasp the spirit of the times of architecture, innovate products and services, and lead the development trend of human settlements, so as to meet people's pursuit of a better life.
Superior Architecture, Ingenuous Technology. Shinejoy will improve every process carefully and do every step well.
Xiamen Shinejoy Housing Industrial Architectural Technology Co., Ltd.
Office Add.: 16-17F, Bld. B04, R&D Area, Software Park Phase Ⅲ, Jimei District, Xiamen, China
Tel.: +86-592-5026001
Fax: +86-592-5026090
E-Mail: [email protected]
0 notes
Video
tumblr
Steel structure residence has the characteristics of light weight, high strength, good seismic performance, good quality, good insulation performance, etc. At the same time, it is also easy to install pipelines, good environmental protection performance, in response to the call of "green building" vigorously promoted by the state.
The model house of Xiamen Shinejoy combines European exquisite small foreign buildings with modern fashion elements to create a warm and pleasant, light and luxurious and elegant home atmosphere.
Xiamen Shinejoy provide integrated services from design, manufacturing, assembly, construction and decoration. In addition to the cost advantages, the construction speed is fast, from the beginning of the design to carry bags into the room, the fastest only 45 days!
0 notes
Video
tumblr
Unloading of frozen storage equipment of Bacolod project
Superior Architecture, Ingenuous Technology. Shinejoy will improve every process carefully and do every step well.
Xiamen Shinejoy Housing Industrial Architectural Technology Co., Ltd.
Office Add.: 16-17F, Bld. B04, R&D Area, Software Park Phase Ⅲ, Jimei District, Xiamen, China
Tel.: +86-592-5026001
Fax: +86-592-5026090
E-Mail:[email protected]
0 notes
Video
tumblr
Assembled steel structure building has been widely used in many fields. Whether it is building houses, holiday resorts, schools, libraries, car houses, etc., Xiamen Shinejoy have mature technology. The construction of large-scale warehousing and logistics park is even easier.
The whole structure of integrated attic rack belongs to splicing structure. Using medium-sized shelf or heavy shelf shelf as the support of main body and floor slab, it can be flexibly designed into two-storey, multi-storey and full use of space according to actual site and needs, using shelf as floor support, setting up stairs and cargo elevators, etc. Loft shelves are suitable for places with high warehouses, small cargo, manual access and large storage.
The whole structure of the attic rack belongs to the splicing structure. The overall appearance of the attic rack is more generous and beautiful. Compared with the rack composed of some concrete structures and steel structures, the supporting function of the attic rack is the upper floor of its bottom floor. The overall appearance is relatively close and the utilization of space is relatively high.
Reasonable storage space layout planning is also closely related to daily safety operations. It is conducive to the safety and integrity of warehouse storage and storage materials. It is helpful to reduce the workload of warehouse workers and reduce unnecessary duplication of work. The reasonable layout of the warehouse is also conducive to the smooth passage of various channels, ensuring the safe passage and operation of various personnel in the warehouse.
Xiamen Shinejoy Housing Industrial Architectural Technology Co., Ltd.
Office Add.: 16-17F, Bld. B04, R&D Area, Software Park Phase Ⅲ, Jimei District, Xiamen, China
Tel.: +86-592-5026001
Fax: +86-592-5026090
E-Mail:[email protected]
0 notes
Text
Knowledge Summary of 3D Assembly Villas
In recent years, with the vigorous promotion and policy support of the state and government, the planning and construction of new countryside and new towns has been put on the agenda, which has also led to a new round of housing reform in suburbs and villages across the country. Among them, 3D assembly heavy + light steel villas have become the first choice for building houses. So, what are the characteristics of 3D assembled Chonggang + Light Steel Villas?
01. Basic System
It can adopt strip foundation, crawling space, basement and other forms, mainly strip foundation. Double-storey buildings are excavated 400 mm-600 mm below the ground and 240 mm-300 mm high structural girders above the ground. The construction geological conditions and the design drawing of the building foundation shall be taken as the criteria. Three-dimensional assembled heavy steel + light steel villas have light weight, which is only about one fifth of brick-concrete structure and one eighth of reinforced concrete structure. Therefore, the cost of foundation construction can be greatly reduced. The three-dimensional assembled heavy steel + light steel villas generally use strip foundation.
02. Wall System
Calcium silicate board with inner base plate; OSB board with structure board (9.5mm) imported from Canada; external decoration layer can be cement fibre hanging board/local culture stone/American paint; external wall thickness is generally 120-200 mm; because of the thinner wall, the actual use area of 3D assembled heavy steel + light steel house is increased by about 10-15% compared with traditional house; Steel + light steel houses have more than 90% indoor use area. The indoor space can be separated flexibly. Pipelines can be used to construct reserved holes in walls, floors and roofs, which is better concealed and more beautiful.
Key Points: Thin wall, light weight, large use area, beautiful appearance.
03. Floor System
The floor system is mainly truss type with 305mm light steel beam height, which is assembled by standard small rods. The floor beams are paved with 18 mm thick OSB structural slabs and 40 mm thick lightweight concrete cushion (crack resistant and sound insulation layer) on the top. The floor decoration layer can choose wooden floor, tile or carpet. The floor is composed of high strength hot-dip aluminized, zinc-coated C-type and U-type light steel members. The floor beams are arranged in standard modulus with equal spacing and multi-ribbed ribs. The floor beams are covered with structural slabs treated with strict moisture-proof and anticorrosion, thus forming a strong anti-seismic floor system.
Points: Seismic, sound insulation, floor seam, anti-leakage.
04. Roofing System
The roof truss is composed of heavy steel and light steel members. It can easily and flexibly realize various complex roof models. Generally, the roof uses multi-color asphalt tile, which has excellent waterproof function and highlights the beauty and quality. Chongqing Iron and Steel + Light Steel Composite Roof Truss, EPS wallboard as the wall, waterproof paint on the top of the structural board. Asphalt tile is used for roof tile. The castle can be made of glazed tiles and Spanish earthenware tiles.
Points: The roof is beautiful and graceful, and has strong bearing capacity. It can bear snow load of 1.55KN/or more.
Because the weight of light steel residence is light and the weight per unit area is only 1/4 of the weight of brick-concrete structure of the same area, its foundation treatment is simple and suitable for most geological conditions.
Because the steel used in the structure is processed by factory, the structural accuracy of light steel residence is quite high. The structure system of a villa is composed of ten thousand components. The average error of each component is less than 2 mm, which ensures the quality of the house, which is beyond the reach of traditional building methods.
In order to conform to the development trend of international construction industry and respond to the policy requirement of vigorously advocating green building, Xiamen Shinejoy have always taken the concept of "green, environmental protection and high efficiency" as their enterprise development concept, innovated the construction production mode in an all-round way by means of industrialized manufacturing, improved the quality and efficiency of construction, and practised resource saving and low carbon emission reduction for customers. Provide the overall solution of green building, devote to promoting the comprehensive innovation and sustainable development of China's construction industry, and realize the double harvest of economic and social benefits of enterprises.
As an idealistic enterprise full of humanistic color, Xiamen Shinejoy always grasp the spirit of the times of architecture, innovate products and services, and lead the development trend of human settlements, so as to meet people's pursuit of a better life.
Superior Architecture, Ingenuous Technology. Shinejoy will improve every process carefully and do every step well.
Xiamen Shinejoy Housing Industrial Architectural Technology Co., Ltd.
Office Add.: 16-17F, Bld. B04, R&D Area, Software Park Phase Ⅲ, Jimei District, Xiamen, China
Tel.: +86-592-5026001
Fax: +86-592-5026090
E-Mail:[email protected]
0 notes
Video
tumblr
In site construction, pipeline operation, efficiency and quality are both correct!
0 notes
Video
tumblr
Assembled building is commonly referred to as "building a house with building blocks". It means that the prefabricated components produced in the factory will be transported to the construction site for assembly. Its construction method has the advantages of unified standards, green energy saving, and can solve the problems of dust, noise and pollution in traditional construction.
0 notes
Video
youtube
The model house of Xiamen Shinejoy
Tel.: +86-592-5026001
Fax: +86-592-5026090
E-Mail:[email protected]
0 notes
Video
tumblr
All constructors are professionals with many years of experience in steel structure construction management, familiar with multi-storey steel structure engineering construction technology requirements and construction management process.
Xiamen Shinejoy Housing Industrial Architectural Technology Co., Ltd.
Office Add.: 16-17F, Bld. B04, R&D Area, Software Park Phase Ⅲ, Jimei District, Xiamen, China
Tel.: +86-592-5026001
Fax: +86-592-5026090
0 notes
Video
youtube
Superior Architecture, Ingenuous Technology.
0 notes