ym558ym - Tumblr blog

[ym558ym]

wxrisen.com

An air fryer is a small countertop convection oven designed to simulate deep frying without submerging the food in oil. A fan circulates hot air at high speed, producing a crisp layer via browning reactions such as the Maillard reaction. Some product reviewers find that regular convection ovens or convection toaster ovens produce better results, or say that air frying is essentially convection baking under a trendy new name.

The air oven also comes with a glass "door" that allows me to look in and check on the progress of dishes. This is different from most air-fryers, which are usually enclosed.

An electric oven is a kitchen appliance that runs on electricity rather than gas. For years, many electric ranges featured cooktops with electric coils. Newer models favor smoothtop and induction cooktops. Like gas ovens, eclectic ovens have interior heat elements that warm food via radiation.

A rice cooker or rice steamer is an automated kitchen appliance designed to boil or steam rice. It consists of a heat source, a cooking bowl, and a thermostat. The thermostat measures the temperature of the cooking bowl and controls the heat. Complex, high-tech rice cookers may have more sensors and other components, and may be multipurpose.

An electric kettle is an electrical appliance, that has a self-contained heating unit, for heating water, and automatically switches off when the water reaches boiling point or at a preset temperature below 100 °C.

Induction Cookers are performed using direct induction heating of cooking vessels, rather than relying on indirect radiation, convection, or thermal conduction. Induction cooker allows high power and very rapid increases in temperature to be achieved, and changes in heat settings are instantaneous.

Unlike gas stoves, Gas Hobs sit on the level of your kitchen's countertop and do not protrude. This built-in design makes it easy for you to load/unload heavy cooking utensils on the cooktop. Modern hobs' built-in design eases cleaning it too.

The Single Induction Cooker and the Double Induction Cooker can be great second cooking station for entertaining, and easy for travel use like camping, or for permanent use in a small kitchen.

[ym558ym]

trailerpartsfactory.com

With a capacity between 200kg and 5000kg, hand winches or called manual winches are operated by turning the ratcheting crank/lever to lift or pull a load. If you wind the cable onto the cable spool, the winch will pull in a load. If you wind out, the device will let the load move away.

Trailer winches have cables that are designed to make the loading and unloading of commodities smoother and easier. In terms of boats, loading and unloading boats from trailers would become almost impossible, because of the bulk of the boat, in the absence of a boat trailer winch.

Brake Winches are compact, lightweight and a cost-effective solution for a variety of applications. They can be used for both pulling and lifting purposes and comply to the Australian Standards AS1418.2 when correctly fitted with the approved wire rope and fittings. They can be supplied with a powder-coated, a marine-coated corrosion resistant finish or in stainless steel, depending on your application.

Trailer Jacks are used to raise and stabilize a trailer so it can be attached to the towing vehicle. It's one of many hitch accessories used to make the process of towing a little easier.

A jockey wheel for vehicular use is a retractable adjustable-height wheel used on the front of trailers (or caravans) with either a single axle (two running wheels) or more close-coupled axles at or near the centre of gravity whereby without additional support, the trailer would not remain level. The jockey wheel is situated close to the towing hitch and has a built-in screw jack to enable the trailer nose to be lifted over the tow ball of a car or other powered vehicle. The screw jack can then be used to lower the trailer nose onto the tow ball. Once securely attached to the towing vehicle, the jockey wheel's jacking action is fully retracted for stowage. The jockey wheel can also be unclamped and lifted as far as possible to give the greatest ground clearance before reclamping prior to a journey being made.

A ball mount is a receiver hitch accessory comprised of a shank and a trailer ball platform.

A tie down strap (also known as a ratchet strap, a lashing strap or a tie down) is a fastener used to hold down cargo or equipment during transport.

A full range of trailer parts and spares to suit most trailers. including wheels, suspension units, couplings LED lights and brake parts.

Coupler is a thing that connects two things, especially mechanical components or systems.

A hitch ball (or trailer ball or tow ball) is the ball-shaped attachment that connects the trailer to a hitch. The ball allows the trailer to pivot, providing smooth turning while towing. While the diameter of the hitch ball is fairly standard, hitch ball weight ratings may differ.

[ym558ym]

tkpipebender.com

A Pipe Bending Machine is a type of Machine that is constructed to roll and bent the hallow pipes and even the sections (the sections are the thick and long metals that have square or rectangular shapes) too. The Pipe Bending Machine is also called Manual Pipe Bending Machine or Section Bending Machine whereas; the sections also can be used to bent.

CNC Pipe Bending Machine allows manufacturers to quickly and efficiently set tooling, perform calculations, and meet customers demands for custom orders.

Semi-automatic Tube Bender is designed by Dural as alternatives to CNC pipe bending machines with lower cost than CNC models. It allows you to achieve bending rotation on your 3D bends and will help you to have perfect geometry on your 3D bends.

A Pipe Cutting Machine is a type of tool used by plumbers to cut pipe. Besides producing a clean cut, the tool is often a faster, cleaner, and more convenient way of cutting pipe than using a hacksaw, although this depends on the metal of the pipe.

We are specialized in offering Semi-auto Pipe Cutting Machine to our customers. Our presented product is extremely used in the market owing to their top features.

The pipe shrinking machine is widely used in the processing and forming of pipe joints, automobile oil pipes, air pipes, water pipes, air-conditioning pipes, etc.

An automatic pipe cutting machine that use blades (compatible with blade sizes of 250mm to 450mm). Cutting speed for these machines goes up to 8,000mm/s.

The Pipe Chamfering Machine is a heavy duty machine that creates the perfect welding preps quickly and with great precision.

The Pipe Rolling Bending Machine refers to the machine used for bending the pipe and can also be used as a jack. It is roughly divided into a numerical control pipe rolling bending machine and a hydraulic pipe bending machine. It is used in the construction of electric power, public railway, bridges, ships and other aspects.

The Gear Grinding Machine is a finishing machine that uses a grinding wheel rotating at high speed to grind the surface of the gear (workpiece) teeth. Gear grinders can be broadly divided into continuously generation grinders and profile grinders.

[ym558ym]

takeoff-machinery.com

A4 paper cutting machine (A4 paper sheeter) is suitable for cutting big rolling packaging materials such as paper, paper-plastic, multicolor laminated material,etc. 1.It adopts PLC touch screen control, servo motor for controlling constant-length cutting.

Puppy Training Pads Making Machine is controlled by triaxial frequency conversion drive +PLC, the product specification can be adjusted arbitrarily, the rectifying device is configured, and the touch screen is used as HMI.

Different size wholesale disposable underpad making machine are required for different business needs. Modern paper-making machinery uses a woven mesh to create a web by filtering out the fiber being held and producing a moving wet mat. Once this is dried in the machines, it is issued to create a strong paper web. Based on your type of industry and budget for paper production you can select various types of machinery for your specific needs. Buy from a competitive price a cutting machine, paper-making equipment for making cartons, or disposable cup-making machine. Choose from various types of paper making machines with wholesalers offering a price that depends on your usage. Weight starts from 20-30g/m2 with a Net Paper Width of 787-900mm with working of 20-80m/min. The range of paper production machines has a variety of designs to choose, with safety and environmentally friendly designs.

Surgical Drapes Folding Machine equipped with one set of steel die-cutting knife mold, and drive by servo motor,the perforating position adjustable.

The Paper Straw Machine allows you to produce high-quality, biodegradable straws that combine the best of both worlds: these paper straws have a look and feel that is reminiscent of plastic, are food-safe and contain only minimal amounts of adhesive. They are made using special, material-efficient two-layer technology.

Hamburger Box Erecting Machine is an automatic machine, specialize in making food carton, box, container which are made from cardboard, paper, paperboard, corrugated paper etc.

The Sanitary Napkin Machine is able to dispense both sanitary napkin and tampon. It is an ideal menstrual support for female staff and can be modified to dispense the products free.

The Sheet Cutting Machine is the heart of small scale sheet metal industries. Basically the sheet cutting machine is hand operated one for medium and small scale industries.

Baby diaper machines are growing in popularity due to widespread use of baby diapers across the globe. These machines has a tendency of faster production speed and higher automation degree. Apart from baby diapers, these machines are also capable of manufacturing adult diapers, feminine napkins, and underpads etc. The baby diaper machine market is technologically advanced and largely depends on new technologies to enhance productivity and efficiency.

The paper cup machine uses an open cam, which is more stable and reliable than a gear box.

[ym558ym]

seawalkermarine.com

An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom. They are the most common motorised method of propelling small watercraft. As well as providing propulsion, outboards provide steering control, as they are designed to pivot over their mountings and thus control the direction of thrust. The skeg also acts as a rudder when the engine is not running. Unlike inboard motors, outboard motors can be easily removed for storage or repairs.

An inflatable boat is a lightweight boat constructed with its sides and bow made of flexible tubes containing pressurised gas. For smaller boats, the floor and hull are often flexible, while for boats longer than 3 metres (9.8 ft), the floor typically consists of three to five rigid plywood or aluminium sheets fixed between the tubes, but not joined rigidly together. Often the transom is rigid, providing a location and structure for mounting an outboard motor. Some inflatable boats can be disassembled and packed into a small volume so that they can be easily stored and transported. The boat, when inflated, is kept rigid crossways by a foldable removable thwart. This feature makes these boats suitable for liferafts for larger boats or aircraft, and for travel or recreational purposes.

2 stroke outboard engine produces the suction and compression strokes of the piston in a single action. In the same way, the expansion and exhaust strokes also occur. The expansion stroke is the stage that produces the power that drives the engine. The suction, compression, expansion, and exhaust occur in two ‘strokes’ of the piston; thus, the engine gets dubbed as ‘two-stroke.’2 Stroke Outboard Motor has been known for its fast acceleration, portability, smaller size and lighter weight. In 2-stroke motors, oil is blended with gasoline. As the fuel goes through the engine, it consumes small amounts of oil for lubrication. Therefore, oil changes are not required to power the engine because the oil is continuously injected. The customer simply maintains an oil reservoir either located in the boat or on the engine.

4 stroke board engine creates the four stages, suction, compression, expansion and exhaust. However, in a four-stroke outboard, these four stages are distributed in four strokes of the piston, thus making it a four-stroke engine. 4 stroke motor has been known for its power, low emissions, fuel mileage, lower sound level and how smooth it runs. In 4-stroke motors, there is an oil filter and self-contained oil cavity within the engine, similar to the way it works in a car. An oil change is typically required after 100 hours or one year of use.

An inflatable fishing boat is a lightweight boat whose sides are built of a flexible swollen tube and its bows (forward parts). The tubes consist of rubberized synthetic materials such as polyurethane and PVC. These tubes are buoyant and cheaper than conventional vessels. The transom of a swimming boat (the back of the boat) can be rigid and can be installed as an outboard motor. Based on the size and function of the boat, the flooring of inflatable boats can vary. Roll-up floors, hard floors, and air floors are the three types.

A rigid inflatable boat (RIB Boat), also rigid-hull inflatable boat or rigid-hulled inflatable boat (RHIB), is a lightweight but high-performance and high-capacity unsinkable boat constructed with a rigid hull bottom joined to side-forming air tubes that are inflated with air to high pressure so as to give the sides resilient rigidity along the boat's topsides. The design is stable, light, fast and seaworthy. The inflated collar acts as a life jacket, ensuring that the vessel retains its buoyancy, even if the boat is taking on water. The RIB is an evolutionary development of the inflatable boat with a rubberized fabric bottom that is stiffened with flat boards within the collar to form the deck or floor of the boat.

An inflatable raft is a type of boat that floats when filled with air. There are many different types of inflatable rafts, which are designed for different uses. They are usually made of plastic or plastic-coated fabric. They have multiple chambers that are filled with air. Depending on the type of raft, this can be done by blowing into a valve, using a manually operated or electric pump, or an air compressor. Inflatable rafts are lighter, cheaper and easier to store and transport than conventional boats, which makes them a popular choice for recreation, rescue and other purposes.

Fiberglass boats are boats made of a material known as glass-reinforced plastic. This material is today commonly known as fiberglass. It is material made from extremely fine fibers of glass, being interwoven into another material. In the case of watercraft, this is more often than not some type of plastic. Fiberglass as a boat material usually resembles a form of cloth until it dries. The main reason for the popularity of fiberglass boats is due to the durability of fiberglass. Unlike wooden boats or metal boats, fiberglass boats will not rot or rust. Therefore, their life expectancies far exceed these traditional materials used in boat construction. Further, fiberglass boats are usually lighter weight and stiffer than boats made from other types of materials.

There are also various kinds of spare parts for outboard motors including gaskets, seals, bearings, CDI units, pistons, carburetor, reeds, rods, ignition parts, stators, carburetor kits, cooling parts, lower unit gears, water pumps and so on.

[ym558ym]

kingdesks.com

Standing desk frame helps to bring the desktop to sit on top of it. A personal desktop is unique, but this frame will still fit it perfectly. The telescoping crossbars on the standard 2-leg frame fit desktops anywhere, which means the user can change their desktop later on and still use the same base. There are also 3-leg and 4-leg frames available. They offer more carrying capacity and the ability to support much larger setups and desk configurations.

Electric standing desk frame can be used as active workstation legs for home and office settings. All steel construction and a thick leg support system hold things of great weight. Adjustable feet level out and adapt to nearly any floor surface. Telescopic height adjustment allows you to go from sitting to standing at the push of a button without breaking concentration or productivity. The powerful dual motor features slow lift speed, creating smooth and quiet height transitions for your workstation. The easy-to-use push-button controller features several presets so you can easily find your ideal height.

Crank standing desk frame helps keep the user focus on tasks by allowing them to move from sitting to standing positions throughout the day. This durable desk frame caters to the users' needs by easily adjusting the height with the aid of a crank handle. The leveling feet and strong steel base will keep the desk from wobbling back and forth as the user works or studies, assuring that the desk stands steady all day.

A standing desk or stand-up desk is a desk conceived for writing, reading or drawing while standing up or while sitting on a high stool. Standing desks have been made in many styles and variations. Standing desks may be specialized to suit particular tasks, such as certain variations of the telephone desk and desks for architectural drafting. Some standing desks may only be used while standing while others allow users to sit or stand by adjusting the desk height with an electric motor, hand crank, or counterbalance system.[4] Some desks are also constructed like teacher's lecterns, allowing them to be set on top of an existing desk for standing, or removed for sitting.

Electric standing desk adopts a motor design for smoother and quieter movement. The base support features a solid steel lift system with a large capacity. The desktop is stable and does not shake. The desk features a height adjustment function. The standing desk has preset buttons with a wide lifting range. It is easy to adjust the most comfortable height of the sit-stand desk with one button.

Kids study table is the table designed for children's study. The construction of kids study table is safe and durable. The study table features a desktop made of high-quality materials, and legs constructed with a high-quality steel frame to ensure long-term use. The desk and chair have an excellent load-bearing capacity. Durable rubber pads can prevent table and chair sets from rubbing against the ground to cause damage. The user can easily adjust the height of the table and chair according to the height of the child, accompanying children's growth for long-term use.

Standing desk accessories include under-desk keyboard and mouse platform, active seating and anti-fatigue mat, comfortable supportive shoes, balance board, foam roller, mini elliptical trainer, under-desk CPU holder, monitor riser and laptop stand. All these things can help the user improve the posture, which can reduce fatigue, stiffness, and soreness.

Corner standing desk is the desk designed to be placed in the corner of the room, saving lots of space for the user. The height of the desk can be adjusted easily and the corner standing desk can make the work healthier. Corner desk is designed to encourage more movement, helping to improve productivity and energy, as well as eliminating or reducing neck, back and shoulder pain. It's also a perfect solution for the corner, cubicle or L-shaped desk. The triangle shape allows the user to maximize the corner space.

2 person standing desk is available for two person. The layer shelf in the middle of the 2 person desk can hold all of the important computer components, paper documents and accessories. The user can share the happy working time with your family, roommates and friends. The desk for two person could also work as computer desk, home office desk, craft table, writing desk, office desk, training table, exhibition table, home double desks for twins.

Standing desk drawer is the drawer under the desk to store various of items, such as phone, pens, pencils, glue, erasers, adapters, headphones, cutlery and other small, regularly used items. These items are equipped with self-adhesive and environmentally friendly rubber surface. The user can choose a suitable location, a flat surface, to paste the drawers. The user can hidde it under the table which do not take up space so that the desktop won't be messy.

[ym558ym]

flymodem.net

Compared to a WiFi-only router, which only supports wireless standards, a 4G router supports mobile technology via a 4G wireless module. Once you plug in a micro SIM card with a data plan, the router can communicate with the carrier’s surrounding cell towers to access the internet and generate a reliable WiFi signal. You can easily share this internet access with family and friends. 4G routers can easily share a 3G/4G connection with multiple wireless devices, such as phones, tablets, and laptops, at the same time, and provide internet for wired devices like desktop computers.

4G pocket devices are about the size of a small mobile battery. Small and light enough to fit easily in your pocket; these devices make it simple to stay connected anywhere without having to worry about lugging around a bulky gadget. Just make sure to bring the freely provided mobile battery so that you and your family or peers can stay connected 24/7. The Pocket WiFi device itself might be small but its connectivity power is anything but tiny. Within a radius of 30 to 50 feet, up to 10 devices (or even more) can be connected at one time. You'll be blown away at the sheer convenience of this connectivity. Everyone in the family or the group you're traveling with will be able to use the internet for his or her specific needs. Also, because your Pocket WiFi device can only be accessed with a password, you can ensure that only those within your group are provided with a secure and fast internet connection.

Customer-premises equipment or customer-provided equipment (CPE) is any terminal and associated equipment located at a subscriber's premises and connected with a carrier's telecommunication circuit at the demarcation point ("demarc"). The demarc is a point established in a building or complex to separate customer equipment from the equipment located in either the distribution infrastructure or central office of the communications service provider. 4G CPE generally refers to devices such as telephones, routers, network switches, residential gateways (RG), set-top boxes, fixed mobile convergence products, home networking adapters and Internet access gateways that enable consumers to access providers' communication services and distribute them in a residence or enterprise with a local area network (LAN).

CableFree indoor 4G CPE devices are ideal for residential and business applications with integrated WiFi Access point, Router, optional VOIP/POTS ports. The indoor CPE is typically mounted in an indoor location, ideally in a window or location with favourable signal coverage for best performance.

Outdoor CPE (Customer Premises Equipment) is hardware in the telecommunications industry placed near an office or a home to provide wireless access to the internet. It is always placed outdoors to receive internet signals, boost them, and send them to different areas. A CPE is a specialized gadget meant to repeat the Wi-Fi signal and extend it to another area. They are basically like a secondary router that receives signal strength from a primary router and extends it to users in different parts of the building. It is a specialized gadget meant to strengthen network signals.

5G mesh router joins two or more Wi-Fi access points together, creating and sharing a single, seamless Wi-Fi network that can be expanded and set up to cover even the largest of homes or buildings. One main feature that distinguishes 5G mesh routers from traditional routers is the easy network access they provide. A 5G mesh router, on the other hand, doesn't require constant reconnection, even as you move from room to room. Along with easy management, residential mesh-router kits come with good security support.

While the term USB modem refers to any type of data/fax/voice modem device which can be connected to a computer using USB, the term more commonly describes a specific portable USB device that looks similar to a USB flash drive and can be as small as 100 x 35 x 23mm in physical size and weigh only around 25grams. These small portable USB fax modems do not require a power source and can be plugged into any USB port on your PC, notebook, or Macintosh computer and can also be disconnected from the computer without turning off the system. One end of the portable USB modem will have a USB interface, while the other end will have an RJ-11port for connecting your phone line.

4G power bank router is a router equipped with a power bank, keeping the router running, at least till the battery lasts. You can enjoy an uninterrupted internet connection with these power backup devices. And you can continue with your work or streaming multimedia till the power restores.

A portable 4G LTE router or a MiFi router is a device that uses a satellite connection to plug into the Internet, and not cable. These routers may lack the speed of a wired connection, more in line with a mobile hotspot, but speeds have been increasing since 5G has been gaining in popularity. A mobile router is great for portability, simple Internet access, and is generally easy to use, requiring only a SIM card to get started.

5G MiFi is a small portable router that acts as a mobile hotspot for any of your devices (cellphone, computer, tablet, etc.). Mobile Wi-Fi devices have a small rechargeable battery and typically have a 4-8 hour battery life. This means, unlike a normal broadband router, they don’t need to be plugged in all the time. The benefit of this device is that no matter where you are, you will always be able to connect to Wi-Fi instead of relying on cellular data. 5G MiFi is the best choice for travelers, multiple device owners, heavy internet users and phone users with poor battery life.

[ym558ym]

bathtub-factory.com

A bathtub, also known simply as a bath or tub, is a container for holding water in which a person or animal may bathe. Most modern bathtubs are made of thermoformed acrylic, porcelain-enameled steel, fiberglass-reinforced polyester, or porcelain-enameled cast iron. A bathtub is usually placed in a bathroom either as a stand-alone fixture or in conjunction with a shower. Modern bathtubs have overflow and waste drains and may have taps mounted on them. They are usually built-in but may be free-standing or sometimes sunken. Until recently, most bathtubs were roughly rectangular in shape, but with the advent of acrylic thermoformed baths, more shapes are becoming available. Bathtubs are commonly white in color, although many other colors can be found.

A drop-in bathtub is a bathtub that has been finished on all sides with a lip or rim, allowing it to be fastened or secured to a finished alcove or structure commonly referred to as a surround. This design allows you to simply ‘drop in’ your bathtub, obscuring the outside of the bathtub completely by the surround so only the interior of the bathtub is visible. The surround can be constructed from anything ranging from natural stone to wood and can be raised high or constructed at feet level. This install method is what separates this bathtub design from a freestanding bathtub which can be placed and installed anywhere there is room in your bathroom.

Freestanding bathtubs sit on the floor of your bathroom. They don't attach to a tub surround or deck structure. You can place a freestanding tub anywhere you like in the room. They are available in a wide array of shapes including oval, rectangular and circular, as well as in a wide array of bathtub materials, including wood, cast iron, acrylic, and copper. On average, freestanding tubs cost less to install than built-in tubs.

Massage bathtubs integrate massage with bath. The massage bathtub bottom and four walls all have a small hole, that is used for the jet water. Through the four walls of high-pressure water to stimulate the human body acupoints to relax, the bottom of the nozzle can play the role of massage back, the combination of the two can more perfect relieve pressure.

An acrylic bathtub is a bathtub formed by vacuum sheets of acrylic, which is then reinforced with fiberglass. The surface of an acrylic bathtub is relatively soft and not very rigid. Acrylic tubs can be reinforced with fiberglass, which will increase durability and rigidity. The acrylic bathtubs offer good heat retention, keeping bath water warm for longer than many other materials. And also, they are easy to maintain and repair.

A plastic bathtub is made of a heated polymer composition and then dried into plastic sheets. Glass sheets reinforce the plastic that compresses together for increased strength. A giant suction machine molds the plastic into the shape of a bathtub. Plastic bathtubs actually consist of either molded fiberglass or acrylic, which are similar in appearance. Known for their nonporous surface, durable finish and longevity, plastic bathtubs are prevalent in home bathrooms.

Shower trays are two-toned and have a key function: to hold a basin under the tap (or shower) and to provide storage space underneath. Shower trays can be custom-made to suit a certain room and purpose. Shower trays are made from a variety of materials such as stone resin or acrylic. Acrylic shower trays are lightweight and are usually around 4.5mm thick and reinforced with wood. An acrylic shower tray allows for greater flexibility, but with more flexibility comes a higher chance of breakage.

As the world's first and largest manufacturer of whirlpool products, Jacuzzi is committed to state-of-the-art design, safety and technology. While the company is best known for its innovative whirlpool baths, the Jacuzzi company also designs and manufactures a wide range of non-jetted baths, shower systems, shower bases, faucetry, portable spas, above-ground swimming pools, swimming pool equipment and pumps, as well as agricultural, sump and sewage pumps.

[ym558ym]

aluminumdecoration.com

Aluminum panels are often more convenient to use than steel because of their lightweight and corrosion resistance. Aluminum panels can be used to replace steel for sales samples, color standards, mailing, and even for weathering tests. The panels are made of dense materials without defects and easy to polish, easy to color film with excellent oxidation effect and other excellent characteristics. They are highly polished with a beautiful and stylish metallic silver luster, flat and smooth, and will not scratch hands. Each aluminum plate stock is covered with protective films to prevent it from scratches.

An Aluminium ceiling can be the perfect complement to any office building or retail business.These ceilings are installed in homes, hotels, offices and malls for decoration purposes. An aluminum ceiling will never rust. It can be used for the proper sealing, ventilation, and regular maintenance of air conditioning systems and the building roof to prevent unnecessary exposure to moisture. Aluminum is much lighter than steel and is therefore much easier to transport to an installation site because of its lighter weight, and as a result, aluminum ceiling panels are much easier to install. Aluminum ceiling is fire resistant. Aluminum melts at approximately 1220°F, which is within the range of the average temperatures found in structure fires.

Honeycomb panels are natural or man-made structures that have the geometry of a honeycomb to allow the minimization of the amount of used material to reach minimal weight and minimal material cost. Honeycomb panels are widely used where flat or slightly curved surfaces are needed and their high specific strength is valuable. They are widely used in the aerospace industry for this reason. They can also be found in many other fields such as sporting goods like skis and snowboards.

An Aluminium louver is a window blind or shutter made of Aluminium with horizontal slats that are angled to admit light and air, but to keep out rain and direct sunshine. The angle of the slats may be adjustable, usually in blinds and windows, or fixed. The louver is especially designed to allow passage of air into home while stop water from entering, and built-in with a white mesh. The premium durable aluminum will never rust so that the louver is built to withstand hurricanes, tornados and tropical storm conditions. The sturdy and rigid design features noise free components that eliminate vibration and excess noise to the louver. And it can be installed in both sidewall and ceiling locations to improve air ventilation.

[ym558ym]

allday-textile.com

A bathrobe, also known as a housecoat or a dressing gown, is a loose-fitting outer garment (a robe) worn by people, often after washing the body or around a pool. A bathrobe is considered to be very informal clothing and is not worn with everyday clothes. It is a dressing gown made from toweling or other absorbent fabric and may be donned while the wearer's body is wet, serving both as a towel and a body covering when there is no immediate need to fully dress. Most bathrobes are designed as a wrapped-front garment with belt loops and a matching belt, intended to be tied around the waist to hold the garment closed.

Women's bathrobe is specially designed to be worn before and after bathing for the female. They are large and comfortable. The general texture includes cotton, coral fleece, terry, waffle, bamboo fiber, and other materials. The feel of different materials and craftsmanship, as well as the comfort level of wearing, may be worlds apart. Women's bathrobes always have a thick collar that locks in the warmth of the head and neck. In addition, each long bathrobe has two large pockets, which can hold small items such as mobile phones and keys and can be warm to your hands.

Men's Bathrobe is always designed with a hood, giving a stylish look to the robe and helping in keeping your head warm after taking a shower. And two front pockets for holding frequently used items like cell phones especially when the bathrobe is put on for long. The adjustable waist belt helps in securely closing the robe from the front so that it can be worn with convenience.

Children's Bathrobe is always made from super soft fleece that will feel amazing against your little one’s skin after bath time.100% polyester material is machine washable and easy to care for, so there’s no need to worry about cookie crumbs and spills. Lightweight material keeps the children warm without weighing them down. It can be tossed on after a shower or while watching movies and eating popcorn. Featuring a plush hood, the child can pull up over a wet head of hair instead of a towel after their evening bath. Two front pockets provide a place for tiny hands to heat up or a spot to keep their toothbrush.

A blanket is a swath of soft cloth large enough either to cover or to enfold most of the user's body and thick enough to keep the body warm by trapping radiant body heat that otherwise would be lost through convection. Blankets have been used by militaries for many centuries. Militaries are some of the biggest single consumers of woolen blankets. Military blankets tend to be coarse grey, with thick fibers of over 20 microns. Special blankets known as baby blankets are used to protect infants from the cold. Small children (and some adults) may also use a blanket as a comfort object. Blankets may be spread on the ground for a picnic or where people want to sit in a grassy or muddy area without soiling their clothing. Temporary blankets have been designed for this purpose. Many types of blanket material, such as wool, are used because they are thicker and have more substantial fabric to them, but cotton can also be used for light blankets. Wool blankets are warmer and also relatively slow to burn compared to cotton. The most common types of blankets are woven acrylic, knitted polyester, mink, cotton, fleece, and wool. Blankets also come with exotic crafting and exotic material such as crocheted afghan or a silk covering. The term blanket is often interchanged with comforter, quilt, and duvet, as they all have similar uses.

The thicker design of the adult blanket not only improves the softness of the blanket, but also reduces the possibility of lint, and there is no need to worry about the problem of pilling. Tightly stitching edges and strong seams make your warm blanket more durable than cheap sew blankets. The adult blanket has a great balance in utility and decoration. It can be used as throw blankets for couch, bed, office while watching TV, or presents of lap blankets for elderly. The warm blanket is also a great choice for mothers to use as blankets for baby boys and girls. Besides, a delicate adult blanket is a graceful decorative accent for the room.

Children's blanket of fancy and colorful design features their favorite animal cartoon. The blanket provides kids with a gentle feeling of being hugged. For the safety and comfort of children, children's blanket is always made of breathable cotton fabric, padded with fine glass beads that are non-toxic, lead-free, and antimagnetic. Children's blankets can facilitate kids' sleep with constant cuddle-like tight hugs, which will calm them down when they are excited. The blanket will make any child smile and will make watching tv, reading a book, or snuggling on the couch more comfortable.

Sleeves blanket keeps the user warm and cozy while watching TV, lounging on sofa/bed, gaming, or reading a book. It's an ideal present for family or friends for birthdays, Thanksgiving, Christmas secret Santa gifts, Valentine's Day, holidays. The blanket is always made with soft, cozy microfiber fabric and designed to be long enough to wrap around your feet for maximum comfort. The sleeves allow for full arm mobility and the front pouch can store your mobile devices, remote controls and essentials. Wearable Blanket will not slip down, allowing both hands free to use your laptop or cellphone.

Double Blankets are always made of the highest quality polyester, and uniquely added special fibers to protect the user from static electricity. With one double blanker, the user can start enjoying a comfortable winter. After the blanket has undergone multiple processes and tests, the fixability of the pile is improved. Even after washing for a long time, the blanket can maintain the original shape, and without hair removal or pilling. The blanket overcomes the static electricity problem of polyester fiber. Now it has become as soft and smooth as baby skin, comparable to cotton fiber products. The blanket can be washed by machine at 40°C and are also suitable for drum drying (at low temperatures). Compared with cotton fiber products, double blankets can quickly restore their dry and fluffy state after washing and drying and can be used for a long time without deformation.

Pajamas are several related types of clothing worn as nightwear or while lounging or performing remote work from home. There are many variations in style such as short sleeve pajamas, pajama bottoms of varying length, and pajamas incorporating various non-traditional materials. Often, people of both sexes opt to sleep or lounge in just pajama pants, usually with a t-shirt. For this reason, pajama pants are often sold as separates.