dlinkdevice3713-blog
dlinkdevice3713-blog
Untitled
39 posts
Don't wanna be here? Send us removal request.
dlinkdevice3713-blog · 7 years ago
Text
configure tp link modem bsnl broadband
Hey guys what’s up! From our couple of days research, I have found that many of you are looking for How to configure tp link modem bsnl broadband. And still now if you are looking for the same thing then you are at the right post. Because in this article we are going to discuss each and everything about how to configure tp link modem bsnl broadband.
How to configure Static Routing on TP-Link ADSL2+ modem router
•    At first open any of the web browsers on to your computer or laptop, then on the address bar of the web browser enter your router default IP address. Then press enter.
•    Now a new login page of your router will open where you have to type the username and password in the login page, the default username and password both are admin and then click OK to log in the web page.
•    Once you enter correct password and username you will be login into your Router.
Tumblr media
•    Then click on advanced option than under advanced option go to routing there you will see the routing information in the next screen.
•    Now if you want to add router then click on ADD ROUTE button to add a new route and then Save.
In this above way, you will be able to configure Static Routing on TP-Link ADSL2+ modem router login to tp link modem.
Conclusion
We hope that our service has pleased you. Still now if you have some query relating to this topic. Then comment down below in the comment section. We will try to reach your problem as soon as possible. If you have been benefited after reading this article. Then share this article help others also to know about this article.
0 notes
dlinkdevice3713-blog · 7 years ago
Text
TP-Link RE 200 Wi-Fi extender device
TP-Link is the well-known name in the network solution field. The major reason for the popularity of TP-Link is the products offered by them. The major business of TP-Link is to manufacture and market Wireless routers and Wi-Fi extender device.
TP-Link RE 200 Wi-Fi extender device Introduction
Tumblr media
 Wi-Fi extender is the device that used to extend the Wi-Fi signals. This device is great for you if your room has low Wi-Fi zone. One can install such device in the home to extend the signals and fix the dead W-Fi zone. You can avail TP-Lin RE 200 Wi-Fi extender device to boost the network strength. If you are seeking for a Wi-Fi extender device then, you can try the TP-Link RE 200 Wi-Fi extender device that is powered by lots of features.
TP-Link RE 200 is an amazing device that has lots of features in which you can easily boost the wireless signals. Getting engaging with this TP-Link RE 200 Wi-Fi, you can connect this device with ay Wi-Fi signals. Apart from boosting the wireless network signals, you can easily setup and configure the router device. This wireless signal device support two bands including 5 GHz and 2.4 GHz. If you are gamer then, you will definitely love this extender device.
Tumblr media
It will give you powerful performance without any lag. One will find a wide range of other features that make it easier for the gamer to get powerful gaming experince4 like never before. When it comes to setup and configuration, you can easily configure the Wi-Fi extender device from tplinkextender.net access.
So, if you are frustrated with low Wi-Fi signals then, you can try TP-Link Wi-Fi extender device. This device will allow you to easily boost the signals and range of your Wi-Fi network. Apart from this, you can go to the tpextender net to configure the Wi-Fi extender device.
0 notes
dlinkdevice3713-blog · 7 years ago
Text
Get more space on your Dropbox
Drop box desktop is also known as desktop client it work in Mac, windows and the Linux operating system and help you to access drop box through hard drive, using of drop box on PC is like using any drop box folder automatically sync or data on your linked account this app will runs in background and keep files sync and backup online Dropbox sign in. It is same folder on of your computer. Access personal and work drop box from same PC on your PC work drop box and the personal drop box you can use these folder separately because these folder is make separate on your PC.
How to earn free space:
1. Complete Dropbox getting started guide.
2. Here refer your family, friends and co-workers to drop box.
3. Then contribute the Dropbox community forum.
Users access folders and files any time anywhere form mobile web or PC from drop box application, all these clients connected with secure servers and Dropbox sign in provide to access files and also allow file sharing with other also update linked accounts when files changed, deleted or added, If you are user of drop box and feel like your account has hacked please don’t use account and instead contact to drop box helpline, if your account is hacked then please give some to drop box Support Company, don’t access any files and other thing to account.
1. Drop box files rest with 256 bit (AES) advanced encryption standard.
2. (SSL) secure sockets layer and (TLS) transport layer security is protect data between drop box append the servers.
3. Secure sockets layer and transport layer security creates secure tunnel protected with 128bit.
4. Here two- step verification is available for extra security to login, use of two step verification here you choose to receive security code by message.
0 notes
dlinkdevice3713-blog · 7 years ago
Text
ADSL Settings for Netgear Nighthawk
This article will provide you the complete information about the step-by-step process to configure the settings of your Netgear DSL router.
Make sure that you have the following information before configuring the Netgear modem settings.
•             The first information you requires is the type of the internet Connection.
•             Then you require the login details provided to you by your Internet Service Provider.
•             The correct values of VPI and the VCI.
•             The LCC or VC based Multiplexing method.
 You can connect your computer to the any of the LAN port of the router by using the Ethernet cable once you have all the above information.
 The Smart Wizard interface uses the following steps to configure the settings.
•             Open the browser that you are using and type the web address http routerlogin.com  or http ww.routerlogin.net in the search bar menu and then press the enter button.
•             Then in the next page, enter the username as admin and password as “password”.  The username and password is default and you can change them after you logged in.
•             Select the Basic Settings under Setup from the left menu once the Netgear router GUI is open.
•             Select No option for the question “Does your internet connection requires a login”.  
•             Then you have to select the type of internet connection as PPPoE or PPPoA.
•             After that enter the login and the password details provided to you by your Internet Service Provider.
•             Under the Intenet, IP address select the Get Dynamically from ISP.  If your ISP provided you a static IP address, then select the Use Static IP and enter the information details.  Generally, the option Get Dynamically From ISP is to be selected for better performance.
•             Then select the Domain Name Server (DNS) Address.
•             Click on the Apply to save the changes that you made.
0 notes
dlinkdevice3713-blog · 7 years ago
Text
NAT of Netgear EX6100 Wifi extender
NAT means network address translation NAT using with netgear device accessing the internet, Address your Lan are substituted  for single WAN IP address , our PC  share one IP address from ISP your  network   is more secure since traffic to from internet now go with router address substitution process.
Instructions on how to do NAT is implemented in netgear hardware there are almost no degradation since NAT alters the  in coming Netgear to describe http www. mywifiext net/ creating more than one public address, the double NAT means connecting one router  to directly behind  another purpose of lite LANs, NAT was designed to conserve public internet address space as the number of PC internet providers quickly depleted address supply NAT became the primary method for IPv4 address conservation the basic NAT performs one to other mapping between two sets of the ip address the most common configuration NAT is also function one to many mapping the NAT home address maps the private  IP address of all device to the only single public NAT is also work inspected the contact of both incoming and outgoing IP message the modifies source address in the IP protocol header the configured address mapping.
This is useful to connecting to public network and also separate private network.
Steps to enable NAT:
First of all make sure that wireless PC or tablets is connected to the EX6100 wireless network.
Then you want to do open your internet browser  and type http //www.mywifiext.net/ in the address bar and click enter button.
When the page is open here you type user name and password, your username is admin and password  is password after click login in.
1.Here you Tap to setup then LAN setup.
2.Select enable NAT.
3.Than type your IP address and IP subnet mask.
4.Then Tap to Apply.
0 notes
dlinkdevice3713-blog · 7 years ago
Text
Actually important
Article 13 #CensorshipMachine, and Net Neutrality being under attack again.
Article 13 is BAD, folks. It seeks to tear apart the internet as we know it, just as those in the United States fear will happen with the retraction of Net Neutrality.
Do you like YouTube, AO3, Tumblr, Twitter, or art, writing and memes that are related to your personal interests in show, internet content, movies, bands etc? WELL, WAKE UP BECAUSE SOON THAT’S ALL GOING TO GO AWAY IF THOSE IN AND OUT OF EUROPE DO NOT TAKE A STAND. Creativity through the internet is in jeopardy, and we cannot sit around.
Contact your MEPs, speak up for what is right and what you believe in. The internet and how we use it is vital in this day and age. Do not let that right be taken away from you. Do not let them sector creativity and freedom.
To partake in the fight to save Net Neutrality, call your local congressperson(s) and let them know why it is so important.
To recap:
Net Neutrality: VERY GOOD AFFECTS THE UNITED STATES FOR NOW, BUT WHO KNOWS WHAT ELSE THEY WILL GET MONEY HUNGRY FOR IF THIS DIES
Article 13 #CensorshipMachine: QUITE BAD AFFECTS DIRECTLY EUROPE FOR NOW, BUT THIS WILL LEAK INTO OTHER AREAS OBVIOUSLY
Without Net Neutrality, you will be legally charged to pay for your internet in an elimination way (i.e. “I need Google, but I want Tumblr this month too, so I guess no Twitter, Instagram or Reddit for me for the next while…”)
With Article 13 passing, it will be illegal for fanart, fanfiction, memes to be posted on the internet due to “copyright infringement laws.” ALL OF THIS WILL BE BANNED FOLKS. NO MORE FOR ANYONE.
In conclusion: I hope we all stand up to fight for freedom on the internet, and do not ignore the glaring issues as those higher up wish we would. Freedom for all on the internet is a right, not a privilege.
Have a great rest of your day. 🖤
4K notes · View notes
dlinkdevice3713-blog · 7 years ago
Text
Belkin NetCam application
Hey guys what’s up! From my couple of days research, I have found that many of you are looking for Belkin NetCam application. And still now if you are looking for the same thing then you are at the right post. Because in this article we are going to discuss each and everything about Belkin NetCam application.
Tumblr media
Specification of Belkin NetCam application
•    The Price of this camera is near about $79.99
•    This netcam.belkin.com Belkin NetCam application comes with night vision.
•    You can keep a great look WHAT IS GOING ON IN YOUR HOME FROM YOUR SMART DEVICE, WHICH MEANS EVEN IF YOU ARE NOT AT HOME YOU CAN SEE WHAT YOUR KIDS are GOING ON IN YOUR HOME FROM YOUR SMARTPHONE.
•    Setting up of this Netcam is not too much difficulty even you don’t need CDs and complicated user manuals. You just simply have to do download the free NetCam app to your Smart Phone and plug in the camera at home. Now you have to install the app on to your smartphone or tablet.
•    ON THE FREE VERSION OF THIS CAMERA YOU WILL GET MANY FEATURES. BUT IF YOU subscribe to Cloud+ Premium Services then you will be able to record and store your favorite videos in the cloud, which means you can enjoy them later.
•    Wemo use your Router network and mobile internet network to control your home electronics right from your smartphone.
This is the main specifications about Belkin NetCam application. If you have some query relating to Belkin NetCam application. Then comment below. We will try to clarify your Query. Follow us for the more relaxed type of article.
0 notes
dlinkdevice3713-blog · 7 years ago
Text
What to Do If Can’t Connect with Netgear WiFi Extender Device?
Millions of wifi extender udders face problems of slow internet connections and in that case they will need high speed internet connection solutions. Most of users install wifi extender devices and there are many wifi extender models available for Netgear Netgear_EXT Setup users. You can choose any wifi extender device by Netgear and then you can manually configure your device easily. In this article we are going to explain the situations when users face issues like they can’t get connected to their devices easily.
Here are the Solutions  
·         First you can connect your devices that are a computer device and a Netgear wifi extender device using Ethernet cable. These wired connections are much more secure than wireless connections that can get disturbed just because of other wireless activities that are going on at your location.
·         Access Netgear wifi extender login page and then you can find the “Settings” option from there. These options are used when you need to change the configurations for your extender device.
·         Under the “Setup” click on “Wireless Settings” option.
·         Your access point device and your wifi extender devices must use same login passwords. If the passwords are not correct then you have to change the password and choose same password for your devices.
When you choose same password for both wifi extender device and your router device, you can make sure that you can easily get connected to your devices. When you click on “save” button, you can save the configurations for your device. You can now easily access the configurations for your device and then you are free to elaborate other configurations for your devices.
Updating the access password time to time will help your routers to get a secure plan and you can have internet connections for a long range.  
0 notes
dlinkdevice3713-blog · 7 years ago
Text
Sound detection settings for Dlink DCS-8100LH HD
So, if you are a lover of the technology and you love reading the blogs or articles from the internet. If you have ever read out the blog whose main topic is to bring its users the information which is related to the security cameras you must have checked for the function of the sound detection which is available in the cameras.
In this blog, we will help you in clearing your doubts which is related to the sound detection and provide you the necessary steps that are helpful in performing such feature.
What is sound detection?
Sound detection is the feature which is enabled in those cameras where they have to record the videos in the areas which are having high sound or on the areas where the volume threshold between the 70 Db to the 90 DB.
Here are the steps for enabling the feature of the sound detection for www mydlink com sign in
Step 1: Click on the option of the wifi cameras and after that click on the main feature icon which is displaying on the top of the right corner. Step 2: Click on the option of the settings which is displaying on the main feature menu.
Step 3:  Click on the feature of the sound detection and then check on the box of enable sound detection to make it turn on the option of the www mydlink com sign in.
Step 4:  Make the selection with the help of the slider bar to the sound level that you want to adjust. A sound which is having the noise less than the selected then you will receive the notification.
Step 5: After this go to the option for the device list and click on the icon which is the top right corner.
0 notes
dlinkdevice3713-blog · 7 years ago
Link
When a machine on the internet needs to accept an amount of data from a device which is behind a firewall or NAT (Network Address Translation) router, port forwarding is necessary. When any system which is behind the firewall or NAT router send data to a device over the internet, the default reaction of the device is to reject the data and prevent it from entering the device until or unless forwarding is being configured on the port.
0 notes
dlinkdevice3713-blog · 7 years ago
Link
If you do not want to use status LED fir your device performance then we will recommend that you must use the smart setup wizard for your device and from there you can find performance report for your tplink repeater net device. Connect your tplink wifi extender device with your computer device and then you can access tplinkextender.net web address easily.
0 notes
dlinkdevice3713-blog · 7 years ago
Link
when you need to reset your Belkin NetCam for default settings. You will need to reset your camera device to all default settings when your device finds some problems for your devices. There are also some other wireless settings that you will need to find for your Belkin camera devices.
0 notes
dlinkdevice3713-blog · 7 years ago
Link
Lack of Communication: So, the most common disadvantage of playing games online is that playing games online results into the lack in communication. Unlike traditional games, where children need to go outside for playing games and this does not happen in case of online games.
0 notes
dlinkdevice3713-blog · 7 years ago
Link
For removing old dlink account any user will need to access mydlink login account and when they access mydlink account there they will need to access and choose dlink device. From the list of the devices, you can choose the device for which any user need to dlink device.
0 notes
dlinkdevice3713-blog · 7 years ago
Link
when I receive new Linksys RE6300 wifi extender last week, I was so worried because I had no idea how to use and how to install this useful wifi extender device. In read a number of blogs and watch some videos on you tube also. After reading all these article I come to know that we must install Linksys wifi extender device using manual configurations and such advance settings are very easy to use.
0 notes
dlinkdevice3713-blog · 7 years ago
Link
Just open the website which is tplinkrepeater net and move to the option of the system tools à factory defaults and after that click on the button for restore for getting the restoration done successfully.
0 notes
dlinkdevice3713-blog · 7 years ago
Text
Roblox log in steps from your computer device
Roblox is a creator sandbox game that allows you to share the content of the games that you have to make other players play.  This is the step-by-step guided instructions for beginners after sign in, players need to login to Roblox website first, and then adjust the profile settings in the menu to set characters like inventory items, clothing, wardrobe.  But if you want more unique collection then you must have to buy these rare items in Roblox.
The following are the steps need to login into Roblox.
•             The first step is to open the browser that you are using Chrome, Mozilla, and other browsers and type the https //www.roblox.com/ in the address bar menu. Connect with the players around the world before playing the game online.  For doing this you need to download Roblox first and get to the Roblox Studio.  
•             The next step is to enter your username and password and then click on the login button.  If you don’t have an account then you need to sign up first.
•             There are many games that you can play in Roblox games among the fourteen genres currently played for you, this includes Fighting, RPG, Action, FPS and so on.  You can also play Roblox on your Android, iPhone, iPod, etc.  
 Roblox itself is not a game for the game lovers around the world especially in America and Europe.  Unlike the other sandbox game like Minecraft creator, it is much easier and easy to play with.  Roblox allows the user to use the coding to provide a unique variety of unique gameplay.
The builders can create complex online environments just similar to the real world and then play it and use it with the other players around the world. Roblox mission is to be a leader in the world in the user-generated gaming of all age group.
0 notes