#BaseApp

[prayfornobu]

I’ve been seeing magic mirrors around the internet for a bit now and have been thinking of making one for months.  With the pi 4 dual monitor support it seemed like a perfect time for a  project

Materials * 24″x36″ acrylic mirror * 2 monitors - I’m very happy with these monitors.  They’re very thin and light, I didn’t even need to remove them from the casing * raspberry pi 4, heatsink * wood frame kit - This is actually for an art canvas, so it definitely isn’t going to provide the necessary support we need, so we’ll have to build it in the back * 1″x3″ piece of wood to cut to build the support structure for the back.�� You’ll need a total of 96″ to build out 4 24 support pieces.  I also cut the corners into smaller blocks that angle perpendicular to the top bar * black board - I got this at an arts and craft store, a sturdy light board painted black or painted cardboard would work, the lighter the better and easy to cut * black felt * clamps * handsaw - I hope you got a circular saw * Sandpaper - Most of my day was spent sanding and dreaming of power tools * Glue - wood + superglue or gorilla glue * Paint if you want * Right angle ruler * Power drill and screws

A picture of all the materials App * BaseApp * Spotify * Googlephotos * Systemstats * Webview - this runs all the tumblr tv which powers the gifs.  Webviews out to tumblr.com/tv/simpsons for example

The cutting of the wood and painting were done prior to the build.  The assembly and  installation of modules and the app were a 1 day build

Building!

Squaring things off to cut

Nothing like handsawing barefoot

Lots of sanding ahead...

Watching paint dry...

More drying paint... The white is the outer frame the black is the back structure pieces

I actually bought 2 of the 24″ frame kits to glue 2 sides together to act as one of the support beams.   The frame portion became a nice holder for the top monitor

Build the frame and place the mirror in.  Use wood glue on the  corners, mallet the plastic corners in that it comes with.  Dont skimp on glue

Theres a small gap around the sides of the mirror and the frame that I padded with felt

Start lining things up and marking off exact mount points, also removed the protective stickers

Add the bottom monitor reversed and cut out the black board, we will need to cover the entire area that isn’t covered by monitor with board

Add the two support beams,  Stabilize with wood glue and screws.  This should be packed such that the monitors won’t move. Where monitor meats board, cover with the black felt held to the blackboard with wood glue.  I left a gap near the edges of each monitor with felt flaps that I can lift up later to place a motion detection camera for future use Glue in the corner squares and clamp them in place

Add the middle supports

Use the pi as a template to cut out a board and drill holes where the pi mount screws go.  The board is about an inch or so bigger than the pi.  Its from some packaging material I had at my apt, any small board will due, this gets glued to the backboard

After all the glue has dried.  Added some metal hooks to help support some wiring

Final product Backside

Overall I’m pretty happy with how reflective it is and I’m very happy with how sturdy it is.  From certain angles you can kind of see the outline of the monitor but its not much.  One thing is I totally didn’t cover up the monitor lights lol, so theres 2 dots - so cover those, I just say it adds to the aesthetic :)

Future things

I need to push some code changes to the magicmirror because it doesn’t support dual monitors.  I’m actually running two apps on different ports for each monitor and some hacking of the js/electron.js to change the x position.  But the app itself should be able to support extended displays, doesn’t seem like much code change i’ll make a pr when I get around to it.  This was for hackday and I was running out of time, gimme a break

Add motion camera, not really sure what it’ll do but i imagine it’ll turn on different modules

Hookup to bluetooth.  I plan on automating turning on and off the monitors and apps when it detects my phone connects to its bluetooth or is in range of it or something along those lines

Cheers!

Cheers!

[tittaagent]

Gpsbabel francais

#Gpsbabel francais install

#Gpsbabel francais serial

#Gpsbabel francais full

#Gpsbabel francais free

Plus, everything INDEX-11 shows with a dependency on lang/gcc9 now. using Mk/ which in turn features USES=fortran, and To GCC 9.1 under most circumstances now after revision 507371. Also drop nop GUI_QMAKE_SOURCE_PATH īump PORTREVISION for ports depending on the canonical version of GCCĪs defined in Mk/ which has moved from GCC 8.3 Submitted by: Oliver Heesakkers (maintainer)Īstro/gpsbabel: fix build on GCC architecturesĬonfigure: error: *** A compiler with support for C++14 language features isĪstro/gpsbabel: Add missing dependencies to GUI option Reviewed by: portmgr, adridg, ehaupt, lme, madpilot, pizzamig, se, sunpoet, yuri Remove konquerer from the x11/kde-baseapps metaport and bump Mark ports recursively depending on Python 2.7 for expiration on June 23.įor ports optionally dependending on Python 2.7, just mark those optionsĪs expired. Many CONFLICTS definitions used patterns like "bash-*" to filterįor the bash package in any version. Version (as reported by "pkg query "%n-%v").

#Gpsbabel francais full

There was no match - agsinst the full package names including the Names without version (as reported by "pkg query "%n"), then - if The conflict checks compare the patterns first against the package */*: Remove redundant '-*' from CONFLICTS * Chris Piazza (Only the first 15 lines of the commit message are shown above )Ĭleanup: remove transitive py27 deprecation (www/qt5-webengine) Number of commits found: 50 Commit History - (may be incomplete: see SVNWeb link above for full details)Ī big Thank You to the original contributors of these ports: USES: compiler:c++11-lang gmake localbase qt:5įreshPorts was unable to extract/find any pkg message Master Sites: Expand this list (1 items) Collapse this list. => Use 'make config' to modify these settings Options name: astro_gpsbabel GUI=off: GUI (Graphical User Interface) support Perhaps later.Ĭonfiguration Options: => The following configuration options are available for gpsbabel-1.7.0: It was harder to do for the Required section. * - deleted ports are only shown under the This port is required by section. Build dependencies:ĭeleted ports which required this port: Expand this list of 1 deleted port SIZE (gpsbabel-gpsbabel-gpsbabel_1_7_0_) = 16718984 Packages (timestamps in pop-ups are UTC):ĭependencies NOTE: FreshPorts displays only information on required and default dependencies. PKGNAME: gpsbabel Flavors: there is no flavor information for this port. NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.

#Gpsbabel francais install

To install the port: cd /usr/ports/astro/gpsbabel/ & make install clean To add the package, run one of these commands: There are no Conflicts Matches for this port. share/gpsbabel/translations/gpsbabelfe_ru.qm.share/gpsbabel/translations/gpsbabelfe_it.qm.share/gpsbabel/translations/gpsbabelfe_hu.qm.share/gpsbabel/translations/gpsbabelfe_fr.qm.share/gpsbabel/translations/gpsbabelfe_es.qm.share/gpsbabel/translations/gpsbabelfe_de.qm./usr/local/share/licenses/gpsbabel-1.7.0/GPLv2+./usr/local/share/licenses/gpsbabel-1.7.0/LICENSE./usr/local/share/licenses/gpsbabel-1.7.0/catalog.mk.WWW: SVNWeb : git : Homepage pkg-plist: as obtained via: make generate-plist Expand this list (16 items) Collapse this list. Server-side processing or as the backend for other tools. It contains extensive data manipulation abilities making it a convenient for To freely move our own waypoint data between the programs and hardware we By flattening the Tower of Babel that the authors of various programsįor manipulating GPS data have imposed upon us, it returns to us the ability

#Gpsbabel francais serial

Or even a serial upload or download to a GPS unit such as those from Garmin and Whether that format is a common mapping format like Delorme, Streets and Trips, Maintainer: Port Added: 15:27:25 Last Update: 14:20:50 Commit Hash: b152544 People watching this port, also watch:: vobcopy, dvd+rw-tools, mplayer-skins, smartmontools, bash Also Listed In: geography License: GPLv2+ Description: GPSBabel converts waypoints, tracks, and routes from one format to another, This is not a primary server, but it used for development.ġ.7.0 astro =5 Version of this port present on the latest quarterly branch.

#Gpsbabel francais free

Want a good read? Try FreeBSD Mastery: Jails (IT Mastery Book 15)įreshPorts needs to find a new hosting provide willing to take a 2U chassis and host it free of charge. FreshPorts - astro/gpsbabel: GPS file translating toolĪs an Amazon Associate I earn from qualifying purchases.

[base-stockholm]

日々大変重宝しております。こちらでのお問い合わせが適切かわかりませんが、BASEサイト内でのｃｏｎｔａｃｔ内の編集機能はないのでしょうか？　もしくはBASEApp「メッセージApp」との連携は実装されるご予定はございますでしょうか？

この度は当テーマをご利用いただき、誠にありがとうございます。

>>BASEサイト内でのｃｏｎｔａｃｔ内の編集機能はないのでしょうか？　もしくはBASEApp「メッセージApp」との連携は実装されるご予定はございますでしょうか？

大変恐れ入りますが、現時点では問い合わせページ内の文言を追加する機能のみとなっております。

また、問い合わせやメッセージAppの管理・開発はBASE側で行っているため、見栄え以外に関する機能追加や編集はデザインテーマ側で手を加えることが難しい状況です。

お手数ではございますが、BASE社まで改めてお問い合わせいただけますと幸いです。

またご不明な点がございましたら、お気軽にご連絡ください。

宜しくお願い致します。

[softsgeek]

com baseapp eyeem-400482-v7.3.apk

com baseapp eyeem apk download available, enjoy and browse unlimited features of app.

People mostly search, download and use social media apps on the web and mobile phones throughout the world. People are spending most of their time on their cell phones than ever before to surf such apps. Mobile applications can allow users set up their interest, goals and make them more productive by tweaking…

[issuewire]

Baseapp Systems releases its new cloud-based saas, CuteHR for SME's

[menubar-blog]

Dropbox — Probably the most brilliant gem. I use the 50GB Pro plan. ClipMenu — My choice for clipboard manager. Pretty simple app with a lot of custom options. Caffeine — Click it to prevent your Mac from automatically going to sleep, dimming the screen or starting screen savers. CloudApp — A well-known one. Allows you to share images, links, music, videos and files. Also, automatically uploads your recent screenshot and copies the link ready to share. BaseApp — Helps you stay on top of everything that happens in your Basecamp accounts. I use Basecamp in my work and I'm tired of the inbox overflowed with Basecamp notifications. Let BaseApp do it. From creators of CloudApp. Growl — The one and only notification system for Mac. Should be built-in. DisplayPad — Allows you to use your iPad as a second display for your Mac. There's a variety of such apps, but this one seems to be the best. Twitter — Official Twitter app. LittleSnapper — Allows you to capture screenshots, organize them or annotate and share. This tool has a very nice and native interface and, as a UI designer, I use it a lot for capturing some inspiring elements. The rest are built-in ones: Keyboard, Clock and Spotlight. (From Gadzhi Kharkharov)