#LCD screen

[spockvarietyhour]

Glitchy

[realgamerslife]

Thermaltake TH V2 Ultra EX ARGB Sync Snow edition AIO vízhűtő

A Thermaltake TH V2 Ultra EX ARGB Sync Snow Edition egy kifinomult hűtőmegoldást kínál, amely egyensúlyt teremt a teljesítmény, a csendesség és az esztétika között

[byruit]

This is…

😳

[illdothehotvoice]

Screaming and crying at how much of a shit show Miku Expo has been the only reason I'm not pissed is because my tickets were only $60 while other's were up to like 300% of that.

[zylcd]

Best Practices for LCD Screen Maintenance: Keeping Your Display Clear and Reliable

LCD screens (Liquid Crystal Displays) are widely used in consumer electronics, industrial equipment, medical devices, and control panels due to their clarity, energy efficiency, and versatility. However, like all electronic components, they require proper care and maintenance to extend their lifespan and maintain optimal performance. Whether you're using an LCD monitor, LCD panel, or touch screen LCD, consistent upkeep is key to avoiding performance issues and unnecessary replacements.

1. Regular Cleaning with the Right Materials

Dust, fingerprints, and smudges can reduce visibility and affect touch sensitivity on LCD screens. Always clean your screen using a soft, lint-free microfiber cloth. Avoid using paper towels, tissues, or abrasive materials, which can scratch the surface.

Use a 50/50 mixture of distilled water and isopropyl alcohol or a screen-specific cleaning solution. Never spray the liquid directly on the screen — instead, apply it to the cloth first to prevent moisture from seeping into the edges or internal components.

2. Avoid Excessive Pressure on the Screen

LCD panels and touch panels are sensitive to pressure. Pressing too hard on the screen can damage the underlying layers, cause pixel distortion, or lead to long-term failure. When cleaning or using a touch screen LCD, apply gentle pressure and avoid tapping aggressively.

In industrial environments, it's recommended to use styluses or gloves designed for capacitive or resistive screens to reduce wear and tear during regular operation.

3. Protect Against Heat and Humidity

Exposure to extreme temperatures or high humidity can degrade the internal structure of LCD modules. Install screens in well-ventilated areas and avoid placing them near heat sources like radiators, sunlight, or machinery that emits heat.

For industrial LCD screen installations, ensure proper enclosure protection (IP-rated housings) to shield the screen from environmental hazards like water, oil, or corrosive chemicals.

4. Use Screen Savers and Automatic Power Off

Static images displayed for extended periods can cause "image burn-in" or ghosting on some LCD models. While less common in modern LCD displays, it’s still a good practice to use screen savers or enable automatic sleep modes during inactivity. This reduces screen wear and conserves power.

5. Regular Function Testing and Firmware Updates

For LCD touch panels or LCD modules integrated into industrial or medical equipment, regular functionality testing is essential. Ensure the touch function, brightness, and interface performance are within the desired range.

If your display uses a controller board, check with your supplier for any firmware updates that may improve compatibility, responsiveness, or fix known bugs.

At Shenzhen Zhiyan Optronics Co., Ltd., (zylcdshop.com) we not only supply premium LCD screens and modules but also provide guidance on maintenance and support to keep your display solutions performing at their best.

[parts4cells]

📦 Why Top Repair Shops Bulk Order Phone Parts (And How It Pays Off)

Smart repair shops know the secret to faster repairs and higher profits: ordering essential parts in bulk. From iPhone screens to battery kits and flex cables, having the right components on hand doesn’t just save money — it keeps customers happy and workflow steady.

Let’s look at what successful shops are stocking up on and why bulk ordering just makes business sense.

🔧 What Should You Stock in Volume?

Screens & Assemblies LCDs and OLEDs are your most common repairs — especially for iPhones and Galaxies. Bulk buying = faster service and lower unit cost.

Batteries High-turnover item. Models like iPhone 11–15 and Galaxy S-series are in constant demand. Stocking up avoids mid-week order delays.

Flex Cables & Connectors Charging ports, volume buttons, Face ID flexes — these fail often during teardown. Extras mean fewer job delays.

Camera Modules Premium repair item. Rear and selfie camera replacements are urgent fixes. Bulk stock = more upsell opportunities.

🚀 How Bulk Ordering Streamlines Your Shop

Faster Repairs – No waiting on parts = more walk-ins completed same-day.

Fewer Orders – Less admin, fewer missed shipments, more focus on service.

Part Consistency – Fewer mismatches when parts come from the same batch.

Backup Inventory – Be ready for trends (like sudden spikes in iPhone 13 screens).

💰 The Profit Perks of Bulk Buying

Lower Cost per Unit – Bulk rates = higher margins on every repair.

Reduced Shipping Fees – One big order beats five smaller ones.

Volume Deals – Access to restock alerts, discounts, and faster fulfillment.

📊 Smart Ways to Plan Your Orders

Track your top 30–90 day repairs

Set par levels and reorder when stock drops

Schedule restock days (weekly or bi-weekly)

Use simple inventory tools to stay on top

Also consider bulking up on:

Pre-cut adhesives and gaskets

Screen protectors and screw sets

Technician tools and consumables

📖 Want to see which parts top shops are bulk ordering — and how it helps them scale? We cover ordering tips, repair trends, and smart stock strategies in the full blog.

👉 Read the full blog here

[linsn-led]

📺 LED or LCD? Here's What You Should Know Before Choosing a Display

Not all screens are created equal — and when it comes to choosing between LED and LCD, the differences go far beyond just brightness.

💡 LED screens offer: ✔️ Better contrast and color depth ✔️ Higher energy efficiency ✔️ Seamless modular design (especially for large displays) ✔️ Longer lifespan

📉 LCD screens? They’re more common in small-format devices, but suffer from backlight limitations and lower performance in outdoor or high-brightness settings.

[seohyun93]

The 47-inch Wall-Mounted LCD Display (Model: RT-C8) offers a sleek and durable design with an aluminum casing and tempered glass. Featuring stunning 4K resolution (3840 x 2160) and a 16:9 aspect ratio, it delivers sharp, vibrant visuals ideal for commercial or public settings. With 500cd/m² brightness and optional capacitive or infrared touch, it ensures smooth interactivity. Powered by an Android 6.0 OS and RK3288 CPU, it supports multi-language OSD and various network options including Wi-Fi, LAN, 3G, and 4G. Available in white, black, or silver, the display supports standard VESA wall mounting for easy installation.

[thinkingcomputerrebooted]

when you disassemble LCD screens, you get a glass layer, a display, a polarizer, the liquid crystals, and a backlight. the polarizer can warp stuff, and here are some samples including my cat.

[realgoatreviews]

Glowing LCD Background Mod for Digimon X 🌟

Glow tape makes a great replacement backing for the LCD to allow glowing in the dark! 👌

Grab a Digimon X at 👉 https://geni.us/DIGIMONX

📊 As an Amazon Associate, I earn from qualifying purchases.

[bentbox-co]

[bentboxxx]

[zylcd]

Common faults of industrial display screens and their solutions

When an industrial display fails, how should we troubleshoot and solve the problem? Industrial display maintenance requires certain professional knowledge.

1. The display displays normally, but there is no response when touched

Solution: First check whether there are cracks on the surface of the touch screen. If there are cracks, it should be replaced in time; then check whether there is dust on the surface of the touch screen, which will cause short circuit; then check whether the wiring interfaces are loose; and check whether there are conflicts between the serial port and the interrupt number. If there are conflicts, the resources should be adjusted. Then observe and check whether the indicator light on the control box is working properly. It is normal for the indicator light to be green and flashing.

2. After the power is turned on, the screen of the industrial display is not bright, and the current is about 100mA

Solution: Touch the screen of the industrial display with your hand, and the buzzer does not respond, which means that the program is not running properly. Use a multimeter to measure several groups of voltages. If they are all normal, the fault occurs in the chip circuit, causing a bus error, so that the program cannot run normally. Check whether there is a cold solder joint on the chip pin. You can heat the solder pin with a hot air gun and press it with tweezers to re-melt the solder pin and tin. After processing, restart the machine, and the weak current rises to 470mA and returns to normal.

3. After the industrial display is powered on, the screen is dark and the current is about 230mA

Solution: Touch the screen with your hand, and the buzzer responds, which means that the program can run normally. When the high-voltage bar voltage and control voltage are measured to be normal, it means that the fault occurs in the high-voltage circuit or the lamp is damaged. Disassemble the lamp, if one of the heads is black, replace it; if there is still no light after replacing the lamp, check the high-voltage transformer, and replace it with the high-voltage bar with two tubes of the LCD.

We’re Shenzhen Zhiyan Optronics Co., Ltd. (zylcdshop.com), a dependable supplier of quality LCD screens. Contact me anytime for your LCD display needs.

[parts4cells]

What Is the LCD BuyBack Program by Parts4Cells — And How Does It Work?

Got broken phone screens piling up? Don’t toss them you might be able to turn them into cash while also reducing e-waste. Here’s how the LCD BuyBack Program by Parts4Cells works, and why it’s worth considering for repair shops, tech resellers, and even individuals with old devices.

🔍 Why Recycle Your Broken LCDs?

Cracked or non-working screens are one of the most common repair leftovers. Rather than letting them gather dust (or worse — hit the landfill), the BuyBack Program gives you a way to:

Recover value from damaged parts

Free up storage or workspace

Contribute to responsible e-waste recycling

Reinvest in tools, parts, or upgrades

📦 How the Program Works (In Brief)

Create a Free Account Sign up on parts4cells.com — no fees or commitments.

Check the BuyBack Price List See how much your LCDs are worth based on model and condition.

Request a Free Shipping Label Fill out a quick form and print your prepaid label.

Package & Send Safely Use proper packaging (like anti-static wrap) and label items clearly.

Inspection & Grading Your items are reviewed within 48–72 hours. You'll get a report showing the screen grades and payment details.

Get Paid Payments typically go out within 1–3 business days via your preferred method (PayPal, Zelle, etc.).

📊 Quick Look at Grading

Grade A: Fully functional, no flaws

Grade B: Minor backlight or cosmetic issues

Grade C: Functional but with visible damage

Bad Screen: No touch/display or serious damage — still accepted for recycling

📱 Devices Commonly Accepted

iPhones (6 through 14 Pro Max)

Samsung Galaxy models (S8 and newer)

Some iPads and tablets

The process is designed to be straightforward and efficient — no jargon, no hidden steps. If you’re part of the repair or refurbishing space, this can be a practical way to reduce waste and recover value.

📖 Want all the details? We cover screen sorting tips, common packaging mistakes, payout timelines, and more in the full blog.

👉 Read the full blog here

[karria01]

Unveiling the Magic of Dynamic LCD Video Walls! 🎬

The LCD video wall isn't just a screen; it's a powerhouse of communication, bridging the gap between internal and external worlds. It serves up the freshest dynamic info in a way that's as visually stunning as it is engaging.

On Campus: A Hub of Information On our beloved campuses, these dynamic video walls are like digital storytellers. With different modules, they dish out all sorts of shared knowledge. Need to know the class schedule? Check. Wondering about the weather? It's there. And in case of an emergency, the announcements are up in a flash. But it's not just for the students and faculty. Campus visitors are in for a treat too! Through captivating school promotional videos, they get a peek into the school's soul. They can easily find their way around with campus maps, and stay in the loop about special events. It's like having a personal tour guide, all in one digital display.

HDFocus is a professional LCD video wall supplier that can provide customized solutions according to your needs. For more information, please contact us directly.

[thephoblographer]

The Fujifilm Instax Wide Evo is One of the Best Cameras They've Ever Made

Typically before we receive cameras like the Fujifilm Instax Wide Evo in for review, we’d take a look at the tech specs and stuff to see what’s new. But truly, I didn’t care this time around. And I also don’t think that anyone buying this camera will care either. The point is to ultimately make shooting Instax photos even more of a pleasurable experience and with no surprise, that’s what they’ve…