#RubberAirSpring

[dynemechsystemspvtltd]

Dynemech Anti-Vibration Technology: Advanced Isolation Solutions for Precision, Productivity, and Performance”

The business we operate, Dynemech Anti-Vibration Technology., has responsibility for the development, engineering, and construction of the most comprehensive selection of Dynemech  Anti-Vibration Pads, silent blocks, shock and noise control products. In addition, we are highly skilled in the production of Anti-Vibration regulating pads, equipment mounts, Spring Mounts, and a variety of Anti-Vibration Pads. One of the most well-known manufacturers of Anti-Vibration cushions is Dynemech Systems Pvt.  Ltd.

 The Anti-Vibration Pad offered by Dynemech Systems Pvt.  Ltd. is the ideal option given your situation.

Manufactured from a combination of high-quality rubber polymers and cork, the ideal mixture finally results in the formation of a product that possesses exceptional resistance to water and oil, as well as excellent aging and compression set. Dynemech Anti-Vibration Pads manufactured by Dynemech Systems Pvt.  Ltd.  have a wide range of applications, including but not limited to the following: refrigeration plants, compressors, conveyors, air conditioning plants, diesel generators, business machines, fans, motors, power and impact presses, pumps, CNC machines, and many more. The silent block series that we offer is ideal for controlling the vibrations of machines. When it comes to managing active and passive vibrations from a variety of industrial devices, our products that are based on rubber are ideal.

A crochet knitting machine that is equipped with Dynemech Systems Pvt.  Ltd. spring has been installed. Dynemech Systems Pvt. Ltd. Spring Isolator gives desired natural frequency to obtain phase difference in the frequencies for a rotating machine and impact generating machine. Viscous damping is an important feature of an isolation system. In most cases viscous damping is required to limit excessive movement which could occur as a machine operates at a speed near to, or coinciding with the resonant frequencies of the system.

Generally this problem arises during slow run up and run down of rotating machines and during impact at each stroke in presses and hammers.

The microscope is mounted atop a Dynemech Anti-Vibration Table, which is part of the DIT-AM series. Dynemech Anti Vibration Table DIT AM-HC has natural frequency in the range of 1-1.5 Hz along with self-levelling feature. Available self-levelling accuracy is +-0.10 mm with minimum setting time, depending upon the application requirement.

 Dynemech Membrance Air Springs are used which damps most of the incoming vibrations above 4 Hz. Level difference on top of the honey comb table top surface due to any load change and the equipment if compensated within milliseconds. Used in optical industries, for mounting optical assemblies.

A Housing Closing Machine that is mounted on a Dynemech Spring Isolator Housing closure machines exert a significant amount of force in a manner that is repeated and cyclical.

This typically results in powerful vibrations that are transmitted to the floor and may cause misalignment during the process of product assembly. These machines, when installed on Dynemech Spring Isolators, are able to realize better vibration decoupling technology.

This technology separates the machine operating forces from the structure and the ground, thereby reducing the amount of impact transfer while maintaining the structural health of the plant and the foundation. The isolators are constantly adjusted to the dynamic nature of the plant, which guarantees the highest possible energy absorption, enhanced precision during closure operations, and a significant reduction in the amount of operator wear and maintenance.

Installation of a Vertical Machining Center (VMC) on a Dynemech Wedge Mount derived from the Series DBO

Dynemech Wedge Mounts, Series  are designed for industrial machine tools that require Precision Levelling assembled with respective Dynemech Insulation Plates.

Dynemech Wedge Mounts, Series  have a height of 100/150mm at mean position to help proper cleaning and repairing under the machines, with specs similar to series. Coordinate Measuring Machines (CMMs) that are mounted on Dynemech Membrane Air Springs and have an Inertia Mass

Dynemech Systems Pvt. Ltd.  DMAS system consists of three master pneumatic isolators for 3-point Precision Levelling. Each pneumatic damping isolator consists of a self-levelling plunger mechanism, which is the load sensing, and height-controlling element. The system is supplied with pressure regulator, distributor, non-return valve and other pneumatic accessories necessary for complete systems installation. Clean dry air is required to be supplied to the system.

The installation of CMMs on Dynemech Membrane Air Springs with Inertia Mass results in the creation of an extremely stable floating platform that has natural frequencies ranging from 0.5 to 2 Hz. While the Air Springs Isolate external vibrations and give sub-micron level accuracy, the inertia mass serves as a stable platform for the device.

 The standards of the metrology lab are addressed by this setup, which also achieves an improvement in the repeatability of measurements in actual operational conditions. In the series VHS-LA, the horizontal boring and milling machine is mounted on the Dynemech Systems Pvt. Ltd.  fixators. Horizontal boring and milling machines are among the most vibration-prone and heaviest pieces of industrial machinery. This is due to the fact that they have enormous worktables, high-speed spindles, and powerful cutting forces.

The Dynemech Systems Pvt. Ltd. Fixators Series VHS-LA mounts are Vibration Isolation and Levelling Mounts designed for situations that need a high level of intensity. A sturdy and vibration-free platform is provided by the fixators, which are constructed with a reinforced steel frame and dampening elastomers integrated into their design features.

 In addition to protecting the machine and the shop floor, the fixators reduce the amount of micromovements that occur on the machine, ensure that the machine will remain stable over the long term, and improve alignment as well as the accuracy of boring and milling. Series DIT-AM Equator Gauging System on Anti-Vibration Table is the seventh item on the list. In order to ensure its repeatability and performance, the Equator Gauging System, which is used for comparative gauging in production applications, requires a surface that is both vibration-free and controlled. Because it is mounted on the Dynemech Anti-Vibration Table Series DIT-AM, the gauging system is shielded from vibrations that are transmitted through the floor, changes in temperature, and operating disturbances that are caused by machines that are located nearby.

The use of anti-resonance materials, in addition to the vibration-damping construction of the table, serves to shield measurement cycles from disruptions that are caused by the surrounding environment.

For the purpose of satisfying the precision needs of industries like as aerospace and automotive manufacture, this arrangement offers quality control feedback that is both quick and exact in scenarios involving volume manufacturing.

 The Dynemech Air Damping System with Viscous Damping – Series DRAS-VD has been outfitted with a high-speed press. Dynemech Rubber Air Springs provide highly effective insulation of machines against low frequency vibration/ impact. The element offers a vertical natural frequencies between 2.5 to 6.0 Hz*. The component has vertical to horizontal stiffness ratio of approximately one. Suited for both active and passive vibration control.

Active isolation of high speed power presses, textile machines, vibration test rings, engine test beds, blowers etc. and passive insulation of measuring & testing machines/equipments, high precision grinding/polishing.

To learn more about our products: https://www.vibrationmountsindia.com/products/ #CrochetMachine #TextileIndustry #SpringIsolators #MachineVibrationControl #DynemechTechnology #PrecisionKnitting, #AntiVibrationTechnology, #VibrationControl, #Dynemech, #VibrationIsolators, #EquatorGaugingSystem, #DITAMSeries, #AntiVibrationSolutions, #DynemechMetrology, #GaugingAccuracy, #IndustrialInspection, #WedgeMounts, #SpringIsolators, #RubberAirSpring,

Contact: +91-9810760131

Email: Sales@dynemech.com

Website: www.vibrationmountsindia.com

[dynemechsystemspvtltd]

Dynemech DRAS Series – High-Performance Rubber Air Springs for Precision Vibration Isolation

High-performance industrial applications are supported by the Dynemech Anti-Vibration Technology DRAS Series, which is comprised of Rubber Air Springs High-Precision Vibration Isolation Technology solutions.

The purpose of the Dynemech Anti-Vibration Technology DRAS Series Rubber Air Springs is to provide an exceptional capacity for Vibration Isolation in both dynamic (active) and static (passive) industrial applications. For the purpose of providing improved durability, increased service life, and superior damping, the Vibration Control components are manufactured using elastomeric materials of the highest quality. The DRAS Series is designed to remove low-frequency shock and vibration, which can hinder the accuracy of machines, lower the quality of products, and shorten the lifespan of precision equipment. DRAS Rubber Air Springs are able to provide precise isolation in high-stress applications where traditional mounts are insufficient. These springs have vertical natural frequencies that range from 2.5 Hz to 6.0 Hz*. The Absolute Pinnacle of Technical Accomplishment The natural frequency range is from 2.5 Hz to 6.0 Hz*, and it effectively isolates low-frequency disturbances that are not reduced by typical rubber or metal mounts.

The vertical-to-horizontal stiffness ratio is about equal to one. Maintains a consistent level of performance in all directions, which is an essential quality for dynamically loaded equipment that is loaded in many directions.

• Elastomeric Design for air chambers that are compressed The effectiveness of Vibration Isolation and shock absorption is significantly improved as a result of the synergistic interplay between rubber resilience and air damping.

The High Load Carrying Capacity A is a feature. In particular, it is ideal for a wide range of equipment, ranging from light laboratory equipment to heavy industrial presses.

• Operations That Require No Maintenance DRAS air springs, in contrast to metal springs or hydraulic dampers, do not need to be adjusted or serviced on a regular basis, which considerably reduces the amount of time that the system is offline.

In addition to being easy to install, space-saving, and modular, plug-and-play adaptability enables retrofitting into existing equipment as well as integration into new equipment designs. These applications are designed to accommodate a wider variety of industrial use cases. In situations when the equipment in question generates vibrations that need to be separated from the ground, active Vibration Isolation is utilized. • High-Speed Mechanical Power Presses

 • Vibration Testing Equipment

 • Rotating or Reciprocating Compressors

• Engine and Gearbox Test Beds

 • High RPM Textile Machinery

 • Industrial Blowers and Pumps

• Industrial Blowers and Pumps

Passive Vibration Isolation In situations when vibration-sensitive equipment needs to be protected from vibrations in the surrounding environment: Surface Plates and Metrology Instruments, Coordinate Measuring Machines (CMMs), Laser Interferometers and Optical Systems, Superfinishing and Precision Grinding Machines, Sensitive Laboratory Equipment, Spectrometers, and Microscopes, and 3D Scanning, Polishing, and Calibration Platforms are some of the products that we provide. There are benefits that you can rely on, including improved machine accuracy. Reduces the inconsistencies and inaccuracies that are caused by vibrations in the product.

• Improved Equipment Life Reduces the amount of wear and tear caused by friction, which results in a smoother operation of the machine and can extend its lifespan.

• The Comfort and Safety of the Operator The presence of low vibration levels in the workplace is associated with decreased levels of fatigue and noise.

• Reduced amount of downtime and maintenance Strong structure and passive damping both help to reduce the amount of intervention that is required.

 • Enhanced Performance Across All Sectors of the Economy Established in a variety of industries, including automotive, aerospace, textile, testing and calibration, research and development labs, and more.

To learn more about our products https://www.vibrationmountsindia.com/products/

#DynemechDRAS,  #RubberAirSprings, #VibrationIsolation, #MachineDamping, #PrecisionEngineering, #AntiVibrationMounts, #IndustrialVibrationControl, #LowFrequencyIsolation, #PassiveIsolation, #ActiveVibrationControl, #ShockAbsorption, #PrecisionMachineSupport, #MetrologyMounts, #IndustrialStability, #MadeInIndia, #DynemechSystems, #VibrationFreeOperations

Phone: +91-9810760131

Email: sales@dynemech.com

Website: www.vibrationmountsindia.com

[dynemechsystemspvtltd]

Dynemech Anti Vibration Mount Rubber Air Springs DLPM Series

Self Levelling Pneumatic Isolation for Ultra Precision Machines

Dynemech's Rubber Air Springs Series DLPM are ideal for machines that require superior Vibration Isolations and unmatched quality. It is designed for sensitive, high performing industrial installations and each DLPM series use three master air isolators to create a 3 points quality levelling system, it ensures that the machine always operates at the most favourable height.

Each isolators included load of sensing a self levelling controllers that automatically adjusts to maintain accurate height and control the machine. The system includes all the necessary components, like automatic height controllers, pressurized air tubing and fittings, its process of installation is very easy and quick.

With a incredibly low frequency of 4 to 6 Hz, DLPM mounts absorb even the most low to high vibrations and makes machines ideal for working where stability is accuracy.

Main Features and Benefits of DLPM series.

Automatically adjusts height and balances loads using self levelling system.

Its fast response setting makes machines ideal for a very good setups.

High insulation efficiency supports vertical (adjustable from 6% to 20%) and horizontal (5% to 6%) damping.

Extreme levelling accuracy up to +0.015 mm/m, ideal for very high end accuracy instruments.

The complete installation kit includes all the necessary pneumatic fittings for plug and play installations.

Its Ideal Applications are

Precision Machining Centres

Coordinate Measuring Machines (CMM)

Optical and Laser Equipment

High Speed ​​Presses

Metrology Equipment

Laboratory Test Equipment

Whether you are looking for sharply defined measurements or want to dampen the very smallest vibrations to protects sensitive machineries, Dynemech’s DLPM Rubber Air Springs provide the exceptional controls, damping and gives the right performance out of the box.

To learn more about our products:  https://www.vibrationmountsindia.com/products/

#DLPMSeries, #RubberAirSprings, #SelfLevellingMounts, #Dynemech, #AntiVibrationSolutions, #PrecisionLevelling, #PneumaticIsolators, #VibrationControlTech, #MadeInIndia, #CMMStability, #MetrologyMounts, #PrecisionMachinerySupport

Contact Dynemech Systems Pvt. Ltd.

Phone: +91-9810760131 Email: sales@dynemech.com Website: www.vibrationmountsindia.com

[dynemechsystemspvtltd]

Dynemech – Complete Vibration Control & Precision Levelling Solutions for Every Industry

At Dynemech Systems Pvt. Ltd., we are dedicated to engineering precision vibration control solutions that ensure machine stability, enhanced performance, and equipment longevity. Since our inception, we have been delivering high-performance anti-vibration mounts, levelling systems, and foundation isolation technologies trusted across a wide spectrum of industries—from manufacturing and metrology to HVAC, packaging, plastics, die casting, and beyond.

With decades of expertise, Dynemech has grown to become a one-stop solution provider for machine installation and vibration-damping needs, offering not only a wide product portfolio but also custom-engineered solutions tailored to individual machine specifications and operating environments.

Our Product Range Includes:

🔹Anti-Vibration Mounts

•Wedge Mounts (DL/DLS Series) – They provide precision levelling and secure installation for CNC machines and heavy-duty equipment.

•Screw Support Mounts (DL Series) – They provide stability of dynamic machinery and precision equipment.

•Mac Level Mounts (DML Series) – They provide mounting solutions for various industrial machines.

•Stud and Compact Machinery Mounts – Designed for lightweight and compact machines.

•Jackup Mounts – Use where height adjustment and load distribution is required.

•Level Grip Mounts (DRM) – Designed for easy installation, anchoring, and levelling on uneven surfaces.

🔹Air Spring Systems

•Rubber Air Springs (DRAS, DLPM - Self Levelling) – Rubber air springs allow for load isolation of dynamic loads for sensitive applications.

•Membrane Air Springs (DMAS Series) includes the following high-performance pneumatic isolation systems and are available in series DMAS-SH, DMAS-SL, DMAS-BH, DMAS-BL.

🔹Spring Isolators

•Open Type, Closed Type, and Hammer Mount Series – Isolate vibration from HVAC, industrial fans, pumps, and heavy equipment.

•MAI-P%-TR1 Series – For dynamic machinery and shock-prone machinery.

🔹Shock and Vibration Dampers

•Spring Viscous Dampers – Hybrid design for low frequency vibration isolation and shock damping for die casting, forging and cutting machines.

•DXO Series Shock Mounts – Use for mounting compressors, pumps and any heavy industrial machinery.

🔹 Precision Leveling and Isolation Platforms

• VHS & VHS-LA Mounts – For metrology equipment and CMMs.

• DFL Series – High Precision Leveling Mounts

• VIP Anti-Vibration Platforms (AIS, VIP-E Series) – Made to support sensitive equipment and sensitive labs.

• Anti-Vibration Table (DIT-E, DIT-AHL, DIT-AM) – For microscopes, balances, or any sensitive measuring equipment.

🔹 Isolation and Support Systems

• Sandwich Mounts – Heavy-duty isolation solution for stationary and mobile machinery.

• Cradle Platforms and Machinery Raiser Damping Blocks – Load mounts that offer great damping.

• Rubber Bushes – For shock absorption in linkages and joints.

• Flexi Foot Mounts (DGF Series) – Simple installations for lightweight machinery.

Why Choose Dynemech?

Complete In-House Manufacturing – We oversee all processes from design to deliveries,

Custom Solutions – Custom Vibration Isolation and levelling solutions to suite your machinery,

Global Presence – Supporting industries across India and exporting to over 30 countries,

Proven Technical Support – Our Engineers work with customers to assess vibration issues and provide optimum outcome,

Proven Outcomes – Our products prolong the life of your machine, improve your product quality and protect your foundations.

Industries We Serve:

🏭 Automotive | 🛠️ Machine Tools | 🧪 Metrology | ❄️ HVAC | 📦 Packaging | 🧫 Pharma & Labs | 🏗️ Infrastructure | 🖨️ Printing | 🔩 Plastics & Injection Moulding

🔗 To learn more about our products: https://www.vibrationmountsindia.com/products/ 📞 Contact Us: +91-9810760131 📧 Email: Sales@dynemech.com 🌐 Explore Our Solutions: vibrationmountsindia.com