akikobrook-blog

[akikobrook-blog]

Great features of Hobart Airforce 12ci

A plasma cutter is a very important tool for a lot of professions, especially welding and other jobs that require the cutting of steel. There are a quite lot of plasma cutters in the market and it is quite hard to find a suitable plasma cutter that can do a good job. Enter the Hobart Airforce 12ci. It is a unique plasma cutter in the market that cuts through several conductive metals such as steel, aluminum, etc. the Hobart Airforce 12ci is a good option when considering buying a plasma cutter. In the next few paragraphs, features that make the Hobart Airforce 12ci such a good buy will be highlighted.

Great Features -

In built Air Compressor: The Hobart Airforce 12ci is built with an internal air compressor. This is a wonderful feature since it is really stressful to have to carry air compressors whenever you want to make use of plasma cutters. This feature makes the Hobart really portable and easy to make use of.

INVERTER

It also has an inverter that supplies power. This means that you do not have to worry about external power sources. You can make use of your plasma cutter without worrying about connecting to a power source or something.

LOW POWER CONSUMPTION

Still on power, an amacing feature of the 12ci is that it uses very minimal amount of power to operate smoothly. On only 120V, the plasma cutter can run efficiently meaning that household electricity can easily power your plasma cutter. You do not have to hook up special equipment to run your plasma cutter. All you have to do is plug your 12ci and start working.

LED LIGHTS

the Airforce 12ci plasma cutter are built with diagnostic LED lights that are meant to help in detecting and indicating power, temperature and the readiness of the torch. The LED lights make it possible to know the condition of the plasma cutter easily and quickly and it contributes to the long life of the machine.

THERMAL OVERLOAD PROTECTION SYSTEM

The Airforce 12ci plasma cutter comes with a thermal overload protection system that enables the cutter to work in very demanding work environments. When there is too much work and the pressure of the machine goes overboard, the overload protection shuts the machine immediately. This prevents damage and makes sure that the plasma longer lasts for a long time.

These are the major features of the Hobart Airforce 12ci. The major inspiration behind the design of this machine is to give users better work experience. Therefore, due to the already listed features that the Airforce 12ci possess that makes it better than most plasma cutters, lets look at the benefits that you are likely to get from making use of the Airforce 12ci.

Very Versatile

The Airforce is no doubt a much more preferable to cutting metals using oxy fuel. For one, the Airforce 12ci cuts much faster than oxy fuel. The plasma cutter also cuts through steel, brass aluminum and stainless steel etc more precisely. The Airforce is also capable of cutting thinner kerfs. After cutting, there is also less slag and dirt to clean later on. You do not need extra skills to be able to operate the plasma cutter. The Airforce 12ci is suitable for use on farms or ranches, auto body, plumbing and so on and so forth.

[akikobrook-blog]

GARDEN DECORATIONS WITH A PLASMA CUTTER

A plasma cutter is one of the machines which come in handy in most situations since it can be used for many uses. Other than that, plasma cutters can be used by anyone, no professional training is needed. As long as you know how to hold it and how to set it on the ground firmly, you are ready to go. If you are a DIY lover or an artist then you will find a plasma cutter very essential for your projects which involve metals.

Things to consider before using starting decoration.

·       First prepare your working area before starting

·       Make an outline

·       Safety measures

·       Put the materials in use together

1.     Hand saw tree

With a plasma cutter and an old hand saw or the one you don’t use, you can create an amazing hand saw tree from it.use your creativity to cut out any type of tree from the hand saw. After completion you can hand on the wall next to your garden to add a decoration and make it livelier.

2.     Water fountain

Make a homage water fountain at your garden to add more life by using metallic rods that you have or get some from the hard ware store. The first thing to do is measure the size of the tubes that you want to make fountains. Then get a suitable pump that will be able to pump water unto to the top metallic tube on the fountain. The materials needed for this project are: plasma cutter, a plastic container to hold the water, metallic tubes, fountain pump, PVC pipe, shovel, ball valve and metal screen. You can come up with a suitable designs for the water fountain depending on the space of your garden and the materials you have in hand.

3.     Homemade barbeque barrel

Using the plasma cutter, cut out four metal rods for the stand, to make the BBQ portable, add a wood base at the bottom. Place the barrel on top of the rods vertically and cut out an opening from the barrel halfway to make it look like a lid and attach it with brackets to avoid it from falling apart. Add grills and air vents.

4.     Metallic tables

You can choose to add a metallic table at the center of your garden for lunch time meals or a place for DIY projects. All you need is a plasma cutter, brackets, bolts, metallic sheets and metallic rods.

5.     Animal sculptures

Plasma cutters can be used to make animal sculptures which can be placed on your garden for decoration. The outcome is amazing and glams up the look of your garden.

Finally, plasma cutter can called ‘life savers’ since they can cut through any metal and create a nice decorations from something that was initially old or not of use. Making the decorations at home can save you money since you don’t have to buy readymade decorations for your garden.

[akikobrook-blog]

Top 3 Hypertherm Plasma Cutter review Guide

In any condition when you need to search for a dense plasma cutter in the market that will work uniquely and better than all other cutters and give you an excellent experience, the Hypertherm is surely a right choice and an advanced item that you can purchase without any worry.

With this fantastic cutter, it is guaranteed that you have no need to invest more energy in cutting and this plasma cutter will always give you better outcomes in all conditions. It's users has shared their view that it has a huge scope of required important capacities for any personal or commercial task. This Hypertherm Plasma Cutter is first decision of expert welders and they also advise others to use it.

Hypertherm has an exceptional flexibility and convey ability in the business fields. It is the right mechanical encapsulation of the demanded number of elements. It is speedier and can be setup at a minimum place without any major power consumption. This model can be prescribed to all cutting lovers including any administrator using this first time and experienced laborers. It is possible because its use is very simple and straightforward. It has many features and options for the welders from different backgrounds having different needs. With an extraordinary 1/2 cutting power which cannot be utilized by all cutters, it is the most selling plasma cutters all across the world.

It is generally advertised and use for its small valuable size and convenient body, and highly powerful machine. For all individuals who need to do cut jobs, it is really a magical cutter in affordable price. Its price is bearable and can be purchased by everyone. One thing should also state here that this type of plasma cutter is significantly more proficient than any else cutter and no one can compete Hypertherm Plasma Cutter due to its functionality and rewards. In below, there are various important Hypertherm products are given with their significance.

Hypertherm 088079 Powermax30 XP

It is the best-modified cutting tool which can save your precious time and investments. Now it comes with an increase in cutting speed which is 50% more than ever before. Its design is well tested and very easy to use. It is lightweight which can be taken at any place without much effort. You can use it by just plug in its switch for 120 or 240 Volt.  It can cut up to 3/8 inches per minute at 10IPM. So, Hypertherm 088079 Powermax30 XP is the best choice because of its comfortable grip and extra power and cutting capacity.

Hypertherm 088016 Hypertherm 088016 Powermax45

It is used for fantastic execution so you can get full control, and productivity with the savings of extra dollars. It is 230 volt framework which is used by hundreds of professional welders to cut thicker plates easily. It comes with 20-foot work cable with clamp, 20-foot torch assembly and T45v hand torch. It is preferable, less weight, speedier and a wonderful cutter which have been used since a long time. It’s advantage also includes that you can take it anyplace and utilize it for anything when needed.

 Hypertherm Powermax 65

It is a fantastic tool for any welder because of its varied settings and a wide range of capabilities. It is the best product among plasma cutters. It's recommended cut thickness is ¾ inches which is a great deal for most welders. It is highly recommended for fast cuts and precise cutting. It has improved cut quality which can give you real pleasure of fine cuts. It can be used for many hours consistently because of its extra long consumable life.

At last, it can be said that Hypertherm Plasma Cutters are valuable and handy tools for welders. All of such products have great importance and playing their major role in daily material progress. You just have to know the capabilities of all products and choose anyone according to your specific needs.