aluminumequipment - Tumblr blog

[aluminumequipment]

Tilting rotary furnace, special new design TRF--tilting rotary furnace for aluminum scraps.

[aluminumequipment]

aluminum or alloy rod Continuous casting and Rolling Line---CCR line turnkey project

I. Function and process flow of the aluminum or alloy rod continuous casting and rolling line--CCR line

This CCR line（Continuous casting and rolling line）with 4T/h EC Al-Rod conductive round aluminum rod is applied to produce two types of aluminum rod, that is Ф12mm and Ф9.5mm. And the Ф12mm by 13 rolling stands and Ф9.5mm by 15 rolling stands. The process flow of the aluminum alloy rod continuous casting and rolling line

Aluminum melting furnace group(See the special pages) → New Four-wheel continuous casting machine→ Front pull → Rolling shear →Guiding carrier roller device→ Feeder → Continuous rolling mill → Dual-basket coiler → Aluminum Rod packing → (Weighing to storage).

Please contact Michael @cnmetech.com for detail

[aluminumequipment]

hot aluminum dross processing machine to Mexico

New order for aluminium dross recycling machine---MEXICO :ALTECH ALUMINUM SA DE CV HL1300 hot aluminum dross processing machine+ 1320-10m dross cooling,crushing and screening system. ALTECH ALUMINUM SA DE CV has one 12Ton tilting rotary furnace, which would generate 10MT hot aluminum dross.

[aluminumequipment]

aluminium profile shot blasting machine

[aluminumequipment]

Easy steps to recycle the aluminum from the hot dross that skimmed from the furnaces.---hot aluminum dross processing machine.

Foshan metech aluminum technology co.,ltd (http://www.cnmetech.com) can make the hot aluminum dross processing machine, aluminum dross recycling machine according to your requirement and need.

[aluminumequipment]

aluminum wire rod for EC grade or alloy line

aluminum rod continuous casting and rolling CCR line equipment manufacturer---http://www.cnmetech.com    michael@cnmetech.com

[aluminumequipment]

HL500 aluminum dross processing machine, smaller capacity aluminum dross recycling machine, to recycle the aluminum from the dross

[aluminumequipment]

aluminum rod production line equipment, aluminum alloy rod manufacturing equipment, aluminum rod continuous casting machine, aluminum rod continuous rolling machine, aluminum melting furnace

aluminum rod continuous casting and rolling line, aluminum or alloy rod CCR line.

FOSHAN METECH ALUMINUM TECHNOLOGY CO.,LTD (http://www.cnmetech.com) is the professional manufacturer and exporter of the aluminum or alloy rod continuous casting and rolling CCR line equipment.

For detail of the aluminum rod or aluminum alloy rod continuous casting and rolling line equipment ,please email to michael@cnmetech.com

[aluminumequipment]

Alumininum Dross Processing Machine (Aluminum Recovery System)

Hot Aluminium Dross Processing Machine (Aluminum Recovery System) 

Recover Aluminium, Reuse residual dross, Reduce waste material

inumThe worldwide aluminium industry produces nearly millions tonnes of furnace waste (hot aluminum dross) each year. 

Known as dross, the residual waste material is produced from any process in which aluminium is melted, and is left 

behind after conventional recycling has been carried out. 

However, dross is not a waste. Apart from oxides, dross is largely free aluminium (up to 80 percent by weight)

 making it a valuable commodity. This dross contains about 50% aluminium metal or more, but to collect the 

aluminium metal from the dross is a key challenge yet a necessity in saving resources, reducing costs and improving 

a firm’s profit ratio.

The traditional dross processing technique involves the use of large quantities of salt to separate the aluminium

 from the oxides, but the salt remains trapped in the residue. Disposal of this residue in a landfill can created 

problems because the salt leaches out into the surrounding soil. The salt can be removed from the residue, but 

the process involves significant expense.

FOSHAN METECH ALUMINUM TECHNOLOGY CO.,LTD recently developed and patented an advanced technique for 

retrieving the aluminium from the material. It even allows full recovery and easy valorization of the non-metallic 

part of the dross. The new Hot Aluminum Dross Processing Machine (Aluminum recovery system) with advanced 

treatment method makes it economically viable to treat residual waste left after conventional recycling, offering

 cost savings and environmental benefits.

The advantages of the Hot Aluminum Dross Processing Machine ( Aluminum Recovery System):

The Hot Aluminum Dross Processing Machine (Aluminium Recovery System) can reclaim more than 90% of the 

aluminium metal from the dross and significantly improve the aluminium collection ratio, when compared with 

conventional methods, The great advantage of this system is based all in its remarkable aluminium reclamation 

ratio, which in turn provides a quick Return on Investment soon after its installation.

Its unique design offers excellent operability and high durability. According to actual users, both domestic and 

abroad, the system has yet to malfunction, which attests its reputation for long-lasting, efficient operation.

The Aluminum Recovery System processes and recovers metal at high-speed and extracts the aluminium with only 

a few minutes needed for each processing cycle. Material costs are significantly decreased 

The Hot Aluminum Dross Processing Machine (Aluminium Recovery System) is equipped with dust collector unit, 

which collects the dross waste while it is in the thermal dross processing/aluminium recovery stage. This prevents

 any harmful impact from dross dust diffusion on the surrounding environment and health of nearby residents. 

The residual dross can be reused as heat insulation agents or as deoxidizers, which are needed in iron manufacturing,

 and such reuse of byproducts especially sets the Hot Aluminum Dross Processing Machine apart from conventional 

dross processing methods in contributing to environmental preservation and sustainable use of resources.

Users can select the range of equipment they wish to use, such as the entire system or the dross processing 

aluminium recovery machine alone, which has HL-900, 1100, 1300 types ( can be tailor made as per customer’s need )

developed principally for aluminium die-cast manufacturers; the Hot Aluminum Dross Processing Machine (Aluminum 

Recovery System ) has an excellent reputation due to its compact size yet high efficiency and superior operability.

Application of the Hot Aluminum Dross Processing Machine (Aluminum Recovery System)1. Aluminium and Aluminium 

alloy manufacturers ( Aluminum ingot plant, aluminum alloy rod mill ,aluminum billets factory etc)2. Those who use

 Aluminium and/or Aluminium alloy to manufacture products ( i.e. die cast factories)3. Factories that melt down 

Aluminium recycle materials to make Aluminium alloy4. Other Aluminium industry-concerned plants (i.e. who collect 

and/or recycle Aluminium dross)

http://www.youtube.com/watch?v=luxAFEc6eHo

[aluminumequipment]

Hot aluminum dross processing machine, aluminium dross recycling machine, aluminum dross separating machine, dross processing equipment, aluminum dross processor, aluminum dross recycling equipment.

Foshan METECH ALUMINUM TECHNOLOGY CO.,LTD ( michael@cnmetech.com) is the professional manufacturer and exporter of the aluminium dross processing machine, aluminum dross recycling machine. The aluminum dross recycling machine is an very high efficiency aluminum recycling machine. Aluminum dross processing machine is used to recycle the aluminum from the dross that generated from the melting furnaces, holding furnaces.

The recycling rate of METECH aluminum dross processing machine can up to 95%. It can process about 100-500kgs dross per time within 15 minutes.

The aluminum dross processing machine is equipped with the dust collector, environment friendly.

[aluminumequipment]

aluminum dross processing machine

aluminum dross recycling machine

aluminum recycling equipment

aluminum dross processor

dross processing equipment

aluminum dross recyclying equipment

michael@cnmetech.com

[aluminumequipment]

High Efficiency Aluminum Recycling machine----Aluminum Dross Recycling or Processing Machine

Aluminum Dross Recycling machine, Aluminium Dross Processing Machine, Aluminum Dross Separating machine

Aluminum Dross Processing Machine is a very high efficiency and energy-saving aluminum recycling machine. The aluminum dross processing or recycling machine is used to process the aluminum dross that slagged off from the aluminum melting furnace and holding furnace. The aluminum dross recycling machine can separate the aluminum from the dross, to get the pure aluminum . For there are about 30%-75% aluminum remain in the hot aluminum dross. Using FOSHAN METECH ALUMINUM TECHNOLOGY CO.,LTD ( http://www.cnmetech.com) advanced aluminum dross processing machine can recycle the aluminum in the dross. The recycling rate of FOSHAN METECH'S aluminum dross recycling machine can be up to 95%。

Now it is a trend for the aluminum smelters to recycle the aluminum from the dross. Our aluminum dross recycling machine can recycle about 95% aluminum from the dross with less labor ( full automatically, take 1-2 operators) , less energy consumption ( about 5 Kw), less time ( high efficiency , can process 100-500 kgs aluminum dross in 10 minutes). It is also equipped with the dust collector, which is very friendly to the environment. In a world, it can save your cost , to maximize your profit.

  Please refer to the below video links for detail of the aluminum dross processing machine:

http://www.youtube.com/watch?v=luxAFEc6eHo

  http://www.youtube.com/watch?v=6o513Zzb89I

  FOSHAN METECH ALUMINUM TECHNOLOGY CO.,LTD

michael@cnmetech.com

[aluminumequipment]

Metech-specializing in manufacturing and exporting full line aluminium industrial equipment. Such as aluminum melting furnaces, holding furnaces, aluminum dross processing machine, aluminum ingots,aluminum wire rod,aluminum billet,aluminum coil, ect