coatingdaddyblog-blog
coatingdaddyblog-blog
CoatingDaddy.COM
4 posts
Coatingdaddy deals in products like car paint spray, car spray paints, aerosol spray paint for cars, paint remover, paint remover for metal, spray paint, spray paint cans, rubber spray paint for cars, tyre cleaner, bike paint, spray paint for metal, Foamy cleaner, Brake and Parts cleaner etc.
Don't wanna be here? Send us removal request.
coatingdaddyblog-blog · 8 years ago
Text
Removing Spray Paint From Your Car | Buy Multi-Purpose Sprays Online
Nothing wrecks your day like finding your car vandalized with a can of spray paint. A car is very often a prized possession and it's a rare car owner who doesn't take pains to maintain the car's shiny finish.
Tumblr media
Success in removing the sprayed-on paint will depend on the car's type of finish, the kind of paint that was sprayed and where it was sprayed. How long it's been left to dry will also determine how much effort you need to remove the spray paint. If the paint is still in the process of drying, washing the affected area with a car wash solution or mild detergent mix may solve your problem pretty quickly. But if the paint has already dried, then a little more effort is required. The type of substance that you can use will depend on the sensitivity of your car's finish. More modern cars normally use urethane paint, which makes it a tough coating. With these paints, various household chemicals like WD-40, nail polish remover, acetone, rubbing compound, gasoline or spray-on brake parts cleaner can be used.
Sensitive paints with vandalized finishes can benefit from clay blocks such as those sold by Meguiars. But this specialty product needs a sensitive hand and knowledge of its use, otherwise you may add to the damage by removing more than the spray paint. Other professionals also use the fine rubbing compound that is used as one of the last steps in buffing a newly-painted car. As with the clay products mentioned, care must be taken when using rubbing compounds. Do note that car finishes have clear coats sprayed over the actual paint so you need to be a bit heavy-handed to actually start removing your car's finish.
When removing sprayed-on paint, use a small amount of whatever substance you are using on an unobtrusive test area and apply with a circular rubbing motion. Use a clean rag, preferably white, so that you can see it the sprayed-on paint is being removed. If you see the color of your car on the rag, then the substance you are using is too strong for the finish and you will have to use a milder chemical.
Sometimes, the spray paint will be thicker in some places of the vandalized area. Use a plastic scraper to gently remove most of the paint first, then use the chemical of your choice. Paint on glass or chrome surfaces is best removed by acetone, which leaves no residue. Plastic or rubber moldings will be destroyed by acetone and it would be better to use a strong detergent and a stiff-bristled plastic brush. When you have removed the offending paint, wash and wax your car. To make sure, take your car to a body shop to see if the affected area needs a layer of clear coat.
Wondering how to "sell my car"? This site also has a guide on how to buy a car.
Coatingdaddy deals in paint remover india, paint remover spray, aerosol spray paint, spray paint for cars, automotive spray paint, tyre polish, tyre cleaner, bike spray paints, paint remover, Spray cleaners, Best Spray cleaners, Spray cleaners in Delhi etc.
You May Also Like:-
Spray Paint
Basic Spray Paint
Rubber Spray Paint
Multi-Purpose Spray Paint
Article Source | Article Source
0 notes
coatingdaddyblog-blog · 8 years ago
Text
Learn the Secrets to Rubber Spray Paint Your Car Easily & Quickly - Spray Painting Techniques and Tips
If you really think that you want to rubber paint a car then get ready for a full task ahead of you. It doesn't mean that you can't or shouldn't do it, it just means make sure you are ready to see the job done from beginning to end. If you don't finish the job totally or properly then you are going to be driving something that may be a little embarrassing to the eye at least.
Tumblr media
To paint a car takes careful planning and ensuring that you have all of the supplies you need and the time to go through at least some of the stages.
There are things that you are going to need by way of supplies. You will need masking tape, dust mask, goggles, sandpaper, wax/grease remover, primer paint, paper for covering, car wash and detergent, rubber paint sprayer, putty with knife.
When you purchase you sandpaper make sure you buy fine and thick grit, as you may need both textures. The amount of primer and urethane based paint you need will be dependent on the size of your vehicle. Whether or not you want to use a paint sprayer is up to you, if you choose not to then the regular rubber spray paint cans will do fine. Make sure you wear appropriate clothing when you go to paint a car so your skin isn't exposed.
Finally make sure you have the proper space to work in. You need to be able to work around your car. You most certainly need good ventilation, and you will need to be able to protect it against the elements.
First you must really wash your car well. It doesn't matter how clean it may look to you unless you just washed it, there will be some debris on it that you must remove, otherwise the paint will not adhere properly. Then once you have it washed nice and clean you have to get all the old wax off it so that is where the wax/greaser remover comes in. Its very important you go through these steps when you go to paint a car.
You will probably notice that you have some rough spots on your current finish. If you go to rubber spray paint a car that is in this condition, you will not get good coverage with the new paint. Put little pit marks caused by stones or things like that just use a little putty to fill them in. The use the sandpaper to lightly smooth the rough spots and small holes. Make sure you wipe off all the debris from sanding.
In order to paint a car, you must be absolutely sure that it is dry after your washing. This will take a few hours. Make sure it doesn't get dirty again. Next masking tape off the areas that you don't want to get paint on.
Totally prime the car. Then sand it lightly one again. Be sure to wipe the residue off.
Now you are ready to apply the base coat of the new color. Preferably with a rubber spray gun. Totally rubber spray it then let it dry for about 15 minutes. Then you can apply the second coat. Most often you can get away with two coats.
Let it dry for about 1 ½ hours then you can apply the clear coat. Let dry 15 minutes then reapply. You will probably need about 3 coats of the clear to get a good finish.
Do you want to learn how to rubber spray paint your car and repair bodywork easily in 2 hours or less by the help of our products?
VISIT: https://www.coatingdaddy.com/
Coatingdaddy deals in rubber paint, rubber spray, rubber spray paint, rubber paint for cars, rubber coating spray, rubber coating paint, rubber coating for metal, spray paint for cars, rubber paint spray, spray rubber coating, rubber spray coating, best removable spray paints etc.
You May Also Like:-
Spray Paint
Basic Spray Paint
Rubber Spray Paint
Multi-Purpose Spray Paint
Article Source | Article Source
0 notes
coatingdaddyblog-blog · 8 years ago
Text
Basic Spray Paint Info of Painting Car, Bike, Booths & Equipment
The process wherein a device (paint sprayer) scatters paint all the way through the atmosphere on top of the level surface for coating is called spray painting. There are diverse kinds of sprayers utilized for painting. These sprayers are called spray guns and also spray applicators. It is important that whoever uses the spraying paint device, he must wear gloves, safety glasses and if possible face mask in order to prevent from inhaling resulting fumes of the paint.
Tumblr media
"Atomization "is the straight use of paint sprayer or spray gun to scatter the paint on the diverse surfaces. The spray gun guides the paint on top of the surface that is to be coated. The paint is created using a rotating sprayer or an atomizer that is ultrasonic or by means of directing the paint by passing through the spray nozzles with the use of pressure.
The fundamental paint spray devices include painting spray gun, under pressure container of paint, a scheme of compacted air and also elastic cylinders which connect them all to one another. The bottle of paint is under pressure and it drains from the container into the spray gun through the tubes. The force in the bottle of paint is in charge in this movement.
Kinds of Spray Paint
The following are the two types of Basic spray paints available:
- Canned or Aerosole Spray Paint -This is composed of metal aerosol tin which extremely pressurized and have the paint. The paint is atomized and then pressed out from the regulator that is activated by lowering it by means of the finger. This painting spray device is commonly used in coating graffiti on the walls. - Airbrush Spray Paints - In this type of spray gun, the packed air is mixed together with paint and is directed to the area or plane to be painted.
Paint Spray Booths - these are enclosures utilized in order to contain the spray painting process. When the operations of paint spraying were conducted, usually, the huge amount of paint will also gets sprayed to the air. This paint can get into other facades that do not need the painting. Typical painting spray booths have the proper equipments, surface to paint and an operator or person that will do the painting. The most important is the spraying booth; it has to have a good-quality of air recovery and ventilation, because the air force in the booth will have an effect in the result of the painting spray work, while the exposure to air will lessen the fire and health dangers. The exterior that is being coated is reserved on unlock grid floor, which make sure that the extra paint from the plane drops and is used again.
These booths come in various sizes which depend upon the application, particularly the dimension of the exterior being painted.
Learning the great information on Paint Spray [https://www.coatingdaddy.com/basic-sprays]. 
Visit us at: [https://www.coatingdaddy.com/] for further details.
Coatingdaddy deals in  spray paint, aerosol spray paint, metallic spray paint, spray paint for metal, spray paint for plastic, primer spray paint, metal spray paint, cheap spray paint, automotive spray paint, acrylic spray paint, normal spray paint etc.
You May Also Like:-
Spray Paint
Basic Spray Paint
Rubber Spray Paint
Multi-Purpose Spray Paint
Article Source | Article Source
0 notes
coatingdaddyblog-blog · 8 years ago
Text
Learn How To Spray Paint & Buy Online Spray Paint from CoatingDaddy
Doing spray paint art can open doors of perception into higher states of consciousness. However knowing how to spray paint isn't everything you need to have this experience. Art, a friend told me, is in the way you interpret life. It's a very different perspective from the mind-set of the every day grind. A true car spray paint artist follows the way of the heart. They are authentic! This has nothing to do with your skill level.
Tumblr media
I remember one time that I was painting on a sidewalk outside a university. I was sitting Indian style, surrounded by curious onlookers that were trying to get a better view. The audience was so thick that there wasn't much space for the people to get inside my circle. While I put down the first colors of my painting, I saw one of the people in front of me was barefoot. For some reason they hadn't put any shoes on that day. I looked at him and it occurred to me to surprise him by using his foot in my painting. In that moment, I just grabbed his bare foot and put it directly into my fresh paint! Fortunately it was funny for the audience and the man accepted my crazy idea in a good way.
This kind of spontaneous creativity is what I think really feeds the technique of spray paint for metal art, or aerosol grafia. I love the expressive moments, the times that we get out of our own way and let the great spirit paint through us. To me being in the moment is more important than knowing how to spray paint perfectly.
It is necessary to cultivate this sense of the now, and at the same time, it's also essential to learn to be very practical. We must, as the boy scouts say, "be prepared." One way to prepare is to be sure to carry the materials and tools that you will need, but no extra stuff to weigh you down.
When I go out to perform in a fair or in a nearby plaza, I bring a few important things with me. I carry a sturdy portfolio into which all my paintings and paper go. I bring my newspaper, already torn and prepared for painting. I carry a thin piece of wood to paint on top of. I put my spray painting cans into a backpack that I can easily carry, only bringing the colors that I plan to use. I can put my palette knives, plates, brushes and small music playing device into that same backpack. The music is important because it helps the crowd be engaged while I am working and creates fun moments of fascination for everyone. We can all forget the everyday and enter into the magic of spray paint art together. I bring a lamp with me if I will be doing my show in the evening. It's also possible to figure out how to spray paint underneath a street lamp if it's bright enough and you have chosen your street lamp carefully, preferably the night before. I carry a large piece of red cloth with me to spread out on the sidewalk and display my spray paintings. If the space is small, I may fold the cloth and display some of the paintings up against a nearby wall.
I have done a lot of traveling across Mexico, United States, Europe and more, believing that it is possible to be self employed as an artist and to be the boss of my own life and time. This was my basic motivation when I started discovering how to spray paint, to be free! However, my personal goal was not to become a rich person, so I have always sold my paintings at a price that the "man or woman in the street" could easily afford. In fact, if a person did not have enough money to purchase a painting, I would often accept whatever they were able to pay in exchange for my spray paint art. For me this wasn't a problem.
There were many times I painted where my sales were so amazing that I ran out of materials before I finished my show. There were also places where no matter what I tried, I wasn't allowed to sell my work and I had to figure out how to perform first and then sell my artwork in another area at another time to the interested members of the audience.
One of the first times I went to paint in the Zona Rosa, a tourist spot in Mexico City. I was a bit nervous and I had doubts that something positive would happen. I arrived and got set up. In a few minutes I was painting and it was a great night, full of life and sales. There was also a person who took the time to tell me that he was so surprised by what I was able to do with a spray can. He congratulated me in a way that deeply touched my heart. He told me that there was something truly valuable in me that he felt communicated much more than just artwork. In his eyes, I was interesting and spiritual. I did not feel that way inside, especially on that day! But he helped me feel more secure in my spray painting performance work. It was just what I needed to keep going on my path.
Only two or three days later, I was again painting with a large audience on the same street. I was in the middle of a picture, but I never got to finish it. A police inspector appeared and asked me if I had a permit. I did not have one, or even know that I needed one. He stopped my work and I had to stand up to talk to him. The audience was insistent that I finish the painting I was doing and began to chant "let him finish" at the police man. This was a huge surprise to me!
Even though the people defended me, the inspectors did not change their opinion. They did not leave me any other option. I was so mad that I kicked my cans and they actually took me down to the station.
Fortunately that's all that happened. It did take me some time to figure out what to do next and find a new spot to work. This was a bitter experience for me. Pushing the limits of street permits has taught me so much about our social system and the restrictions that it imposes on our freedom.
So many things have happened to me while spray painting on the streets. I have had wonderful experiences of connection with strangers. I have met every kind of person from rich to poor and crazy to genius. I have learned to be a warrior and to confront a society lost in the day to day grind and materialism. It hasn't been an easy path.
I have had to deal with envious people who hated me for my success. I have also had to deal with police, inspectors and other authorities who try to stop me from spray painting in certain places and sometimes from earning my living in an honorable way. I have learned to identify the bad apples who carry a grudge and to become invisible to them. I have learned that there are so many good people in the world, but often that's not enough to live a graceful life. I've traveled so much and seen places that I never would have seen without learning how to get spray paint cans. This path has been a path of the heart for me and I'm so glad I got out there and did it!
Alisa Amor is one of the original inventors of spray paint art in Mexico. Alisa Amor has created an immense collection of spray paint art instructional videos so that you can become a spray paint artist too. Check it out at https://www.coatingdaddy.com
Coatingdaddy deals in  car paint spray, car spray paints, aerosol spray paint for cars, paint remover, paint remover for metal, spray paint, spray paint cans, plasti dip spray, rubber spray paint for cars, tyre polish, tyre cleaner, bike paint, bike spray paints, spray paint for metal, Foamy cleaner, Brake and Parts cleaner etc.
You May Also Like:-
Spray Paint
Basic Spray Paint
Rubber Spray Paint
Multi-Purpose Spray Paint
Article Source |  Article Source
0 notes