connectrouter

[connectrouter]

Learn How to Update Netgear Router Firmware

One of the most popular networking devices, Netgear Routers are known for their cost-effectiveness and multiple useful features. Once the setup is complete, you can connect devices like desktop computers, laptops, smartphones, iPads, tablets, etc. to the internet.

However, to ensure smooth functioning of the router, you must update the firmware in scheduled intervals. If you do the Netgear update router, it will keep the device up-to-date with the latest features. Besides, you can ensure a smooth functioning of the router in the long run. Here, we will discuss how you can update the firmware of a Netgear Router and how you can ensure its smooth functioning. Read on!

Importance of Netgear Router Firmware

One of the most important reasons why you should update the firmware of your Netgear Router is because the updates improve the router’s performance. Besides, it adds features and enhances the security of your wireless network. Ensuring that the new features are available on the device requires you to ensure that the device is running the latest firmware.

Although the process of updating the Netgear Router firmware is simple and straightforward, you must carefully follow the recommended instructions to avoid any error. You might sometimes need to locate the Netgear WPS button in order to connect the router to your wireless printer. Once you enable WPS, you can set up your printer to print documents wirelessly.

 Stepwise Process to Update Netgear Router Firmware

Now that you are aware of the importance of updating the firmware of Netgear Router, read on to explore how to update the firmware. Here’s how you can do it:

  Visit     Netgear’s official website and download the recent firmware update for     your router.

Save     the downloaded firmware file on your computer’s local disk.

Connect     the router to your computer either wirelessly or using an Ethernet cable.

Once     the connection is established, visit the router login page by browsing the     IP address of the router and then log into the admin console of the     router.

Once     you are logged into the router, click on the “Firmware” tab and then on     “Browse”.

Upload     the firmware file you downloaded and click on OK to start the process of     firmware update.

 Once you complete the process of Netgear firmware update, log out of the router admin console and close the opened tab. After this, if you see that the Netgear password recovery not working, you can reset the router by pressing and holding the reset button of the device for 10 seconds. Later, you can use the default login credentials of the router to log into the router and make necessary changes to the router settings.

[connectrouter]

How to Configure Belkin n300 Router: Amazing Steps?

The Belkin n300 router setup is designed for enhancing the performance and increases the surfing, downloading and other online activities speed. The router comes with a User Manual and Installation setup. The Setup process is easy enough to make your Internet connection ready within minutes and there are several troubleshooting steps to fix the issue within a time.

Credible Reasons Behind Belkin WiFi Extender n300 setup  

Unable to configure Belkin router wirelessly and wired.

Can’t execute Belkin wifi extender n300 setup and configuration.

Can’t attach multiple devices.

Unable to reset Belkin Router if forgot Belkin Router Password.

Belkin range extender n300 setup done properly, and unable to access the internet.    

Not able to setup Firewall connection properly.

Not able to update the firmware of Belkin router.

Unstable Internet Connection

Amazing Steps for Belkin n300 router Setup

Step 1: Detach the modem from power source and connect the router to the modem.

Step 2: Look for the wireless network name (SSID) and connect a PC using the password provided.

Step 3: Launch a web browser and continue the setup by entering the IP address https://192.168.2.1.

Step 4: Once you are on the setup page, tap on the Detect my connection button.

Step 5: The setup detects whether the router’s firmware needs updating or not.

Step 6: Once the connection has been recognized, you will be encouraged to modify your Network Name and Password. 

Step 7: Enter the desired wireless settings in the fields provided and tap on Save and Continue button.

Step 8: Once the new wireless settings have been done, you need to reconnect to the new SSID.

Step 9: After reconnection, tap on the option­–What’s next?

Step 10: Now, register your product right away or hit on Register Later.

Step 10: Hit on the button to go the dashboard.

If you get any issues while figuring out Belkin Router Problems, you must get connected with our certified experts and ask about any issues you have been encountered out with.

[connectrouter]

What to Do When Your Router’s Wi-Fi Password Stops Working?

A loss of connection is disruptive to a daily routine; it prevents us from steaming our favorite shows and listening to music. However, these connection issues are easy to fix so that you can get reconnected relatively quickly. When your Wi-Fi goes down, or you are getting the issue of the WiFi router not working while proceeding through password-entering, you can restore access on your own by troubleshooting some of these common problems.

Guidelines to Fix Your Router’s Wi-Fi Password Not Working

·         The foremost thing you must do is recover the Wi-Fi password if it’s not working even though entered correctly.

·         To do it, from your PC connected to the router, open any of your favorite internet browsers.

·         Enter the IP address of your router in the address bar. The IP address must have provided to you during the fist-time installation of the router.

·         On the login page, enter the default username and password as provided by the technician. The user-credentials must have been written in your manual directory.

Note: If you have changed these default user-credentials, you must then press the reset button must have located on the back of your router.

·         Once you logged into the router’s web interface, You would need to go to the Setup tab at the top and click on the wireless settings on the left side.

·         Select on the Add device with WPS.

·         Choose the Manual option. Your wireless network information should now be visible, including your wireless password.

What Should You Do When You Fail to Reset Your Router – Instant Help

If you are unsure the fact of the router password recovery process when you don’t remember the password you have given for logging into the router’s web interface, there is a need of resetting your router to a factory default settings. If you cannot locate the reset button or need manual guidance to do that, it is advisable to get the assistance from our executive tech member.

[connectrouter]

How to Setup Your TP-Link Wireless Router on Your PC?

Your TP Link AC1900 Dual Band wireless router is known for its best-in-class configuration setup. The dual 2.4GHz and 5GHz bands allow you to connect more devices while at home or office at once. Although configuring the router and setting it up is really easy, along with you, many users are too having difficulties, in some instances, in doing so. Therefore, here are the steps you can follow if you are not sure how to proceed over your TP-Link AC1900 setup process.

Steps to Get Started Setting up Your TP-Link Router Setup

· Power on your new TP-Link router and connect your PC to the router using an Ethernet cable.

· Once connected, open a web browser and navigate to the router login page.

· Set the login password for your TP-Link router by entering it twice. If you are a new user, the preferred one is admin.

· Select on Let’s get started or Login button.

· Follow the instructions that will show on your screen and configure your internet and wireless network.

· Enter the name (SSID) for your wireless network in the given field and also, set up a password to secure your Wi-Fi network.

· Now, join your wireless connection with the SSID using your new password.

This is how you can setup your brand new TP-Link router. No doubt, you might get some sorts of difficulties while doing so.

What If You Find Difficulties While Setting UP Your TP-Link Router?

If you are facing the hardship while manually proceeding over the TP link router setup process, you must get connected with our tech professional for better finding the quickest way to finish off what you wanted.

[connectrouter]

How to Get Rid of NETGEAR Router Login Password Not Working?

Unlike a vast majority of wireless mesh routers on the market, the NETGEAR router is the most popular for design, and configuration setup. The NETGEAR lets advanced users access the same old kind of network gateway but to deal with a lot of network interference, it is one of the best. Highlighting the fact of the downside of every router, NETGEAR users are too having various issues while using the router. For example, some users have been facing some sort of technical failure while trying to login into NETGEAR router. However, this kind of small technical snag can be fixed out with a few troubleshooting techniques.

So, for you we have come up with a troubleshooting guide that helps you fix your router login issue instantly. However, before that, you need to know possible causes that generate the issue.

Possible Causes for NETGEAR Router Login Page Problems

·         Incorrect IP address you have gone through.

·         Entering incorrect username and password.

·         Using an un-supportive web browser.

·         Outdated or older version of the browser on which you are trying to access your NETGEAR router’s login page.

Troubleshooting Steps to Fix NETGEAR Router Password Not Working

ü  Make sure that you are using the correct web address, username, and default password.

·         Username: admin

·         Default Password: password. Note: If you have previously changed the admin password for your router, the default password will not work.

ü  You must ensure that you are using the supported web browser.

ü  Make sure that, the browser is up-to-date.

ü  Get your web browser is free from cache and cookies as the data stored might have been corrupted.

ü  Disable the third-party firewall, any security programs running in the background. Sometimes the web pages you visit, due to the interference of such programs, you might get the issue.

ü  If your remembered password has not been working, then you must try resetting the NETGEAR account password.

How to Recover Your NETGEAR Router Password?

Here are the steps you need to follow to reset NETGEAR router password.

ü  On the login page of your router, click the CANCEL option. Once you did that, a router password recovery window would display out.

ü  Enter your router’s serial number, which you could find on your router’s backside.

ü  Click the CONTINUE button to proceed.

ü  Answer your security questions If you cannot answer your security questions, you need to perform a factory reset on your NETGEAR router.

ü  Click the CONTINUE button to find your administrative password.

Get-Connect with Our Technical Team for Immediate Assistance

If you are having any issues regarding your Router not working or anything else, feel free to get in touch with our technical team for immediate assistance. Our team members are working round the clock to help you fix any sorts of issues you are encountering with.

[connectrouter]

Reset TP-Link Router Extender. Perform TP-Link Extender Factory Reset to its default settings and learn how to configure or set-up router.

[connectrouter]

Learn the steps for Airport Router Configuration or set up and know how to reset Airport Express Router. Also, get to know the process to connect it to another router.

[connectrouter]

If you want to know the steps to access, reset, and login Belkin Router, read this blog. Also, learn about the process for Belkin Router password reset and change.

[connectrouter]

you to enter the default Wi-Fi password. And, the Linksys default Wi-Fi password is “admin.” It is important for you to change the default password

[connectrouter]

When it comes to reset TP Link router or proceed over TP Link Wi-Fi extender setup, many users have been complaining over the difficulties while fixing the issue.

[connectrouter]

Want to reset airport extreme? Follow the correct Apple Airport Extreme Setup. The Airport extreme user needs to follow the correct Apple Router setup to avoid any glitch

[connectrouter]

NETGEAR router is a well-built, nicely designed router that tries its best to keep your network running better than you would ever see with one of those basic routers. It has a cooling vent on almost  the entire surface, thanks to the dual-core processor, and all the exceptional hardware is packed in. Contrasting to all the excellent facts that anyone could lure upon, technical bugs associated with it can sometimes be annoying.