crunchiebutttacos-blog

[crunchiebutttacos-blog]

Hey there! I’m Camron I’m the newest member of this cosplay group. Honestly I was kidnapped and told I was part of this group now so I guess I am, so yeah thats fun! probably wont be on very much but you can find me on my personal Tumblr. The name of itl is Tulababy so yeah

[crunchiebutttacos-blog]

I put the makeup on, made a couple of gifs, and didn’t want to take it off, so I did a lipsynch of The Bard’s Song by Blind Gaurdian.

-Lonely

[crunchiebutttacos-blog]

Decided to do a Faun!Gamzee for an ask blog that I’m part of. My first time doing Faun makeup as well as open chest binding. My chest was angry at me after a while. Perhaps I might do this at a con?

-Lonely

[crunchiebutttacos-blog]

So I’ve had a handful of people ask about the steps I took towards making my CLAMP ruffles so I decided to take some progress pictures. I basically cut the fuzz off of some 6 foot long pipecleaners (Hobby Lobby sells them), wrapped them together to make a super long pipecleaner, and then strung it through the end of my dress through the hem’s hole. One other thing I should mention is that I did have some 1inch horsehair braid already sewn into the end of the dress from 2014 but the weight of my skirt wasn’t enough to support the ruffle shape I wanted. Adding horse hair braid miiiiight help with structure but I’m almost certain you could copy this technique with just pipecleaners alone and it would look almost identical. I hope this helps everyone and if you have any other questions feel free to message me!

[crunchiebutttacos-blog]

KURLOZ: Hello Miss Lalonde, how are you this fine evening? Hopefully you slept the correct amount of hours given our time spent together, you were awfully tired when I took you home last night.

[crunchiebutttacos-blog]

This is what we did. Zombie!Cronus Hunter!Meenah

[crunchiebutttacos-blog]

Foam to Leather (Tutorial)

Things you’ll need:

Brown craft foam

Aluminum foil

Clothes iron

Ironing board

Black paint

Brown paint (lighter than your foam)

Paint brush

Paper towel

Grab some aluminum foil and crumble it into a ball. Not too tight of a ball though! The next step is almost impossible if you do. 

Next, un-crumple the ball. Flatten it out into one layer. It’s fine if there are a few holes.

Place it on top of your foam.

Take your iron and firmly press it on the foam and aluminum. My iron was set to 3 (polyester) but the correct temperature may be different for other irons. Just remember not to use steam! Before doing this on a large piece, be sure to experiment and figure out what the best temperature and what the best pressure is. On larger pieces, you’ll have to move the aluminum around a lot. It’s not a quick process.

Now you’ve got this crinkly affect on the foam. Next is painting!

Grab you’re brush, black paint, and a dish with some water. The idea is to dilute the black paint enough so that when you apply it the paint will seep into the divets the aluminum created. 

Once the watery paint is applied, wipe it off with a paper towel. Continue to do this for your whole piece of foam.

Now here’s an optional step (of which I haven’t done myself but I’ve known others who have):

Grab the light brown paint and, without diluting it, paint it on. It’s best to use a coarse brush in this case and to try to keep it out of the divets. Wipe some of the paint off. 

Remember, imperfections are always good! Uneven paint isn’t necessarily bad so just experiment with it. 

Here’s an example of a bracer I did with this method. The first two pictures are an example of the foam I began with and the rest show the end result. I hope this helps you guys out!

[crunchiebutttacos-blog]

I feel like I’m kind of akward in front of a camera so I’m trying to learn some posing techniques. Elite Cosplay’s video is super helpful if you are someone like me who feels like they one have 1 or 2 “looks” for photos. 

[crunchiebutttacos-blog]

Part 1 • Part 2

Finally this is finished. I didn’t expect it to end up as long as it did, so it was a lot more work than anticipated. Sorry for any inconvenience! 

Feel free to message me if anything is confusing or unclear!

[crunchiebutttacos-blog]

So I was on this website looking at green lipstick (just don’t ask) anD I SEE THIS. IS THAT A FUCKING KANAYA COSPLAY????? Source.

[crunchiebutttacos-blog]

Hello! This is crunchiebutttacos! My group was visiting dolorosa and mindfang that day.

Day 3 1/5

Rose - Me

GodtierDave - insta: lameo.cosplay

Dolorosa (with the caliborn) - @kalawoof

Caliborn (in the black suit) - @endlessended

Bill Cipher - @gravityfactor

Jade - @justanotherfangirl9

DualScar - @acuriousflockofbirds

if you see anybody you know that I missed feel free to tag them

[crunchiebutttacos-blog]

The most amazing thing I’ve seen for nails

[crunchiebutttacos-blog]

We had do much fun at sl comic con 2015. If you saw us in our ancestor cosplay I hope you stopped by. -erisol982

[crunchiebutttacos-blog]

Ready for day 2.

[crunchiebutttacos-blog]

Wonderful.

I just found out that my grey face paint went bad. AFTER I put it on yesterday. No wonder my skin is blistered. NOT a happy Assassin.

[crunchiebutttacos-blog]

Staph being pretty!

Day 1, here I come.