exchangeserver

[exchangeserver]

How to Repair damage EDB File and export the mailbox data into .pst file

When the Exchange 2003 Server becomes corrupt, in most of the situations, Microsoft Exchange Information Store service does not start. In some occasions it does start. Still one will have to address many issues related to the information store. An easiest way to address such issues is to export Exchange user mailboxes to PST format.

Exchange Information Store Corruption

By the corruption of Exchange Server 2003, data from its information store becomes completely or partially inaccessible. Information Store, which is constituted by Priv1.edb, Priv1.stm, Pub1.edb and Pub1.stm database files, is crucial to the healthy functioning of Exchange Server. The table below shoes information contained in each of these database files:

ExMerge Utility to Deal with Exchange Information Store Corruption

Microsoft Exchange Server Mailbox Merge Wizard (ExMerge) is a simple, free-to-download Microsoft utility to deal with Exchange Information Store corruption. It extracts EDB to PST files and then merges the same to mailboxes on another server. It is available for all Exchange versions form 5.5 to 2003, but was replaced by Export-Mailbox/Import-Mailbox facilities in Exchange 2007.

How to Download ExMerge for Exchange 2003

ExMerge utility (Exmrge.EXE) for Exchange 2003, can be downloaded from the Microsoft download page http://www.microsoft.com/en-us/download/details.aspx?id=2743 free. It supports Windows 2000 Service Pack 3, and Windows Server 2003 operating systems. Other instructions are available on the previously mentioned webpage.

ExMerge Operation Modes – One Step and Two Step

ExMerge has two modes of operation – One Step (for Extract and Import) and Two Step (for Extract or Import).

In One Step mode, the administrator extracts mailboxes from one Exchange and imports to another through an intermediate PST file. Here the source mailbox and the destination mailbox should have the same name and container path.

In Two Step mode, the Server mailboxes are extracted to PST file or PST files are imported to Server mailbox.

How to Perform Data Recovery Using ExMerge

Here we use the Two Step Procedure of ExMerge to extract files from Exchange Server to PST. After launching the software, the steps are continuous and so there is no chance of error.

Launch ExMerge utility.

Select the option Extract or Import (Two Step Procedure)

Select the option Step 1: Extract data from an Exchange Server Mailbox

Enter the name of the source server.

Choose the destination mailbox from the list under Available Databases.

Select the source mailbox/es.

Select a directory for exporting the files, and wait for the wizard to complete exporting.

Now, stop the Exchange Server 2003 Information Store service.

Go to ExchSrvr\Mdbdata folder, and rename the Pub1.edb and Priv1.edb files

Delete all the files in the folder, except the renamed ones.

Run MS Outlook from a client system and send emails to all users in the global address book.

Now run ExMerge utility again, this time selecting the option Step 2: Import data into an Exchange Server Mailbox of the Two Step Procedure.

By the end of the process, the user mailboxes will be available on the new Exchange Server. NOTE : - Before starting, make sure that users are not using the email client program or accessing emails. Limitations of ExMerge Utility ExMerge is not a perfect data recovery utility. It has many limitations.

It moves user mailboxes only. It cannot move specific Exchange configuration properties (like connector settings, MS Outlook settings, and client-side rules).

It cannot move public folders, distribution lists and distribution list memberships. You can try to do it manually.

It cannot move OST (offline) emails. But you can move them after converting OST file to PST.

Microsoft Exchange Server Mailbox Merge Wizard (ExMerge) is a simple utility to deal the corruption of Exchange Information Store. It extracts data from an Exchange mailbox to PST files and then imports it to another Exchange mailbox. Otherwise, you try some professional tool, visit here : http://www.edbtopstconvert.softwaredatarecovery.net/

[exchangeserver]

Get familiar with right option to recover a failed Exchange 2013 Server

However, talking about exchange server failure, you could easily overcome the situation by using the Setup /m:RecoverServer switch which rebuilds the Exchange server with the same name by making the full utilization of object information from Active directory. However, it is very important for you to initially cross examine the installation path of Exchange Server. In case you have installed it on different location then you got to make use of Targetdir switch to specify the location.

The steps that you got to follow are:

Open the ADSIT EDIT tool

Navigate to the following location: CN=ExServerName,CN=Servers,CN=First Administrative Group,CN=Administrative Groups,CN=ExOrg Name,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DomainName,CN=Com

Right-click the Exchange server object, and then click Properties.

Locate the msExchInstallPath attribute. This attribute stores the current installation path.

In our scenario, let us consider that the default location is

C:\Program Files\Microsoft\Exchange Server\V15

Now, here is the following task you got to conduct for recovery of failed exchange 2013 server.

Initially, it is important for you to reset the computer account from AD

Install the proper operating system and name the new server with the same name as the lost server.

Allocate the very same IP address

Make sure you join the server to the same domain as the lost server

Assign same drive letters on the server

Install the essential prerequisites and operating system components.

Navigate to the Exchange 2013 installation files, and finally run the following command.

Setup /m:RecoverServer /I Accept Exchange Server License Terms

Finally, once the Setup gets completed, reconfigure the custom settings that were formerly present on the server, and then restart the server, and finally put the recovered server into production.

Nevertheless, while thinking of a complete Recovery plan for Exchange Server, it is ideally recommended to make the proper use of exchange server recovery software like Kernel for Exchange Server Recovery that could easily work around the issues without any complexity. While using such exchange server recovery tool, one do not require to make use of cmdlet commands to extract mailboxes from offline edb files. The key aspect of the software is that it allows administrators to successfully extract data from offline edb files and export it into multiple file formats such as, .pst, .eml, .msg etc. as a user, if you feel like using the disk space then with this tool it is very much possible. You can easily make use of disk space while scanning and recovering EDB items. Along with that, it has got an advance filters that in-turn help in exporting specific items.

Consequently, the next time if you ever face a failed exchange server and don’t know how to resolve a failed exchange 2013 server, just take help of exchange recovery tool. Visit here : http://www.edbtopstconverter.softwaredatarecovery.net/

[exchangeserver]

How to Manually Import/Export PST File in MS Outlook 2013

In general, MS Outlook automatically stores messages, appointments, contacts, journal entries, tasks, and notes in one of the following two locations:

In a personal storage folder, which is primarily known as .pst file.

Now, when used without Microsoft Exchange Server, Microsoft Outlook 2013 stores the data that simultaneously includes all default and custom folders in a personal folder file. Another important point that you also need to note is that when MS Outlook 2013 is used with Exchange, your mailbox, data resides on the server rather than on your computer. The moment you open MS Outlook, the program contacts the server and within a matter of a few minutes display your data.

Unless your only email account is on an Exchange Server, Outlook 2013 creates a local data file for you when you set up your profile. Depending upon the requirement, it is very much possible to create a new PST file and then add or remove folders to it. When Exchange Server is the only account, Outlook stores all items in your Exchange Server mailbox.

However, it is important that you clean up all old tasks or messages that get pile up. Outlook 2013 provides an AutoArchive feature that enables you to specify how often Outlook should clean out old items, which items to move, and so on. If you choose to archive items rather than delete them, Outlook places them in a PST file of your choosing. Nevertheless, it is very much possible to restore them back. Manually, you got to open that set of folders and successfully copy the items back to your regular folders. In fact, the more relevant option you can opt is the usage of the import feature in Outlook to import from the archive file.

If you had to remove your account profile and no longer have access to previously archived folders, you will need to import the file back into Outlook to gain access to the files again.

Click the File drop-down menu. Navigate to the Open & Export sub-menu, and then click Import/Export.

By default Import from another program or file, get selected. If it doesn’t get selected then click Next.

Select Outlook Data File (.pst), and then click Next.

Click Browse, and then choose the PST file you want to import.

Click Open and then click Next. If a password was assigned to the Outlook Data File (.pst), you are prompted to enter the password, and then click OK.

Set the options for importing items. The default settings usually don’t need to be changed.

The top folder — usually Personal Folders, Outlook Data File, or your email address — is selected automatically.

Include sub folders is selected by default. All folders under the folder selected will be imported.

The default selection of Import items into the same folder in matches the folders from the imported file to the folders in Outlook. If a folder doesn’t exist in Outlook, it will be created.

Select the Folder you want to import and Click Finish. You’re done! 

Although you might be doing much of your work in Outlook 2013, but rarely there are occasions when you want to move data into Outlook from other programs or might even require exporting data from Outlook to another program. Just by following the steps mentioned above you could easily import and export item.

Nevertheless, if you want to opt for other option then you can opt third party application like Kernel for exchange server recovery. In fact, by using this tool you could easily recover the Mailbox Databases and Public Folders and finally save mailboxes of .EDB in .PST file which can be imported in MS Outlook. http://www.softwaredatarecovery.net/blog/ost-to-pst-export

[exchangeserver]

How to migrate the DBX file into NSF format manually?

What-so-ever may be the reason, the main question here arises is how can the migration be done without the expense of efforts, resources and funds? This process of migrating DBX files to NSF file can be performed manually with the help of the Numgrade.exe upgrade wizard which has been introduced by IBM. The entire process can be completed in a few simple steps which hardly consumes much time. Here goes the steps which needs to be followed for swiftly migrating the DBX files into NSF:

Step 1: Click on Start -> Run and then type cmd.exe and Click ‘OK’

Step 2: Now, enter the Notes Client program Directory and open upgrade wizard

Step 3: Click ‘Next’ and follow the consequent instructions until you reach ‘Finish’ button

Step 4: Now, in the Notes ID file provide the password

Step 5: Create Notes mail account in Outlook Express and provide the details such as the account name, user name and IMAP server

Step 6: Close the application

After the successful creation of Notes account in the Outlook express, select it and then click the ‘IMAP Folder’ button which appears in the right pane. Thereafter, a dialog box appears which displays the folders which already exist in the NSF database. In order to make the folders of your choice visible to everyone, you need to select them and then click ‘Show’ button.

Now, to perform migration from Outlook Express to Lotus Notes, simply drag the emails or data items from the Outlook Express folder to that folder which is recently added from NSF database. To quickly and easily carrying out the process, you can make selection of multiple data items in a single go. This process enables to perform precise conversion with ease and accuracy.

Although, this process of migration is efficient and effective but when the migration of multiple mailboxes needs to be performed, such as in the cases where the mailboxes of the systems of entire organization have to be converted, then this method might turn out to be tedious and time-consuming. In such a condition, that methodology should be adapted which requires minimal manual efforts and can provide quick results.

The use of third party software is the optimum choice in such a scenario where bulk migration of DBX mailboxes into NSF mailboxes is involved. You can perform an online market survey before purchasing one for yourself. More Detail http://www.softwaredatarecovery.net/dbxtonsf.html

[exchangeserver]

How to Repair Exchange databases with Eseutil/Isinteg tool?

Exchange administrators can take the help of Eseutil and Isinteg utilities to repair corrupt exchange databases. Both Eseutil.exe and Isinteg.exe utilities are inbuilt with MS Exchange Server and facilitate soft and hard database recovery from the corrupt Exchange Server. By default, these tools are stored in the following drive location:

C:\Program Files\Exchsrvr\bin

However, before, you make use of Eseutil and Isinteg tools, do the following actions:

Log in as Exchange administrator

Copy running or inaccessible EDB database in a backup folder

Dismount the EDB database from the Exchange server

Free the disk space by moving unnecessary files and folders into portable media

Check the hard disk for bad sectors using CHKDSK utility

Do the following steps to run Eseutil.exe from command prompt:

Click on Start>Run

In the run box, type “cmd” and press “ok”

Go to C:\Program Files\Exchsrvr\bin directory

Type Eseutil.exe in command line

Esutil.exe has two repair switches “/r” and “p”.

Eseutil /r command is soft database recovery mode of the Exchange Server.

If EDB files are severely damaged, then you should use Eseutil/p command. The command line to repair severely damaged private or public EDB file is:

Eseutil /p C:\Program files\Exchsvr\mdbdata\ primary name.EDB

After you have successfully repaired the EDB database with Eseutil /P command, run Eseutil /d command to defragment the repaired EDB file.

Run Isinteg.exe for integrity check of repaired EDB databases. The command line will appear like this:

Isinteg –s {Exchange Server name}-fix-test all tests

Select the repaired Exchange database file from the default Exchange server directory

Run the Isinteg command line till no errors are reported on the Server

Run the Eseutil \G command to check the integrity of the repaired EDB database

Remount the repaired EDB database using Administrative tools of the Exchange Server

If all users on the Exchange Server use MS Outlook or Outlook Express client, then there is little chance that the Exchange Information Store will contain Streaming media or STM file along with EDB and Transaction Log files. However, if POP3 client such as Windows Live email is configured on the Exchange Server, then Exchange Information Store will also consists of STM file and you need to repair both EDB and STM files in a pair.

Third party Software

Facing EDB corruption issues due to JET engine failure or software malfunctioning cannot be fixed with Eseutil and Isinteg command tools. Therefore, you must choose a third party Exchange Database repair utility. A proficient Exchange database repair utility can easily fix major corruption issues of the Exchange Server and repair EDB databases in a batch. The Exchange database repair tool usually convert EDB file into Outlook PST format. It recovers entire data of the Exchange mailbox from the inaccessible Exchange Information Store and saves in PST file format. Moreover, a professional Exchange database repair utility also allow network administrator to mount the recovered Exchange mailbox on the Server. To get more information about exchange database recovery, Please Visit : http://www.edbtopstconverter.softwaredatarecovery.net/

[exchangeserver]

How to migrate EDB to PST with the help of ExMerge Utility

Microsoft has offered ExMerge utility in order to handle problems that occur in the database of Exchange server. ExMerge utility has been designed to extract emails from a corrupted Exchange server, save it in .PST file and place it at desired storage location. Outlook PST (Personal Storage Table) is a file format that contains copies of windows messaging, calendar entries, e-mails and other items supported by Microsoft Exchange. ExMerge is useful to avoid virus attacks as it has the capability to find and extract a specific e-mail message from infected EDB.

ExMerge utility can be applied for a single mailbox, chosen mailboxes or all mailboxes in an Exchange server store. Including this, it can also process a batch of .PST files, matching them up correctly with Exchange mailboxes while importing data from .PST files to an Exchange server. ExMerge is advanced about duplicating messages as it prevents you from exporting the same contents of a mailbox twice to the same .PST file. Another advantage of this outstanding duplicate detection is that you can use ExMerge as a "brick level backup" solution which is backup of a single mailbox instead of an entire database.

For installing ExMerge utility, you must have Exchange server 2003 (along with admin tools of Exchange 2003). The supported versions of Exchange server are 2003, 200 and 5.5 & supported operating systems include Windows 200 SP3, Windows server 2003 and Windows XP. However, MS Exchange server 2007 doesn’t permit ExMerge utility to be run directly on the Exchange server machine which is possible with the earlier Exchange versions. On the other hand, this utility takes many steps & more time to run. Usually, it consumes 45 minutes as the average time the initial step takes around 45 minutes for a single GB of EDB data.

Furthermore, ExMerge can take one to two hours for the execution of the second step of the process. So, you should plan carefully before you actually apply this utility on corrupt Exchange database. In case, you do not get satisfactory result from ExMerge utility, you are recommended to look for a third party tool like Kernel for Exchange server recovery. It is a trustworthy & proficient EDB recovery tool and it easily resolves all issues of Exchange server and finally converts inaccessible EDB files into Outlook PST format. You should must visit this site for seeing detail : http://www.edbtopstconverter.softwaredatarecovery.net/

[exchangeserver]

Solve Exchange Server Error 1053

Microsoft Exchange Information store maintains Exchange databases and manages transactions in order to provide other services and messaging clients with access to mailboxes and public folders. The MS Exchange Information store also takes care of space management and buffer management.

The Microsoft Exchange Information Store service uses a database engine called Extensible Storage Engine (ESE), which is a transaction-based database technologyservice to access all its data. In order to start this services, user types ‘services.msc’ in the Run command prompt and then select ‘Microsoft Exchange Information Store’ service. Following these steps, the service usually starts, but in some situations the service fails to start in case information store gets corrupted or damaged due to certain reasons such as unexpected system shutdown, damaged headers, antivirus scan, log file corruption, virus attacks, etc.

A user may encounter an error message in Microsoft Exchange Server while trying to start Microsoft Exchange Information Store service manually, which is as follows:

“Could not start the Microsoft Exchange Information Store Service on local computer, Error 1053: The service did not respond to the start or control request in a timely fashion.”

On occurrence of such an error message, data saved in information store becomes inaccessible. To resolve such an error message and to access the records saved in Information store, perform the following guidelines:

Repair the corrupted EDB file using Eseutil/p inbuilt repair command.

In case the Eseutil/p command fails to repair, then restore the EDB file using an updated backup.

In case backup file is unavailable or get corrupted, then use a third-party Exchange Server recovery software to repair the corrupt EDB file.

Kernel for Exchange Server is an apt solution to be opted to repair corrupt, damaged or inaccessible MS Exchange Server EDB files. The software supports MS Exchange Server 5.0, 5.5, 2000, 2003, 2007 and 2010 versions. The software offers advanced settings options in order to optimize repair and recovery process of EDB database files. The software all versions of MS Outlook and Windows operating systems and offers user-friendly interface such that no technical expertise is required for operating.  For more  information you can follow this web path http://www.edbtopstconverter.softwaredatarecovery.net/

[exchangeserver]

Resolving EventID 489 in Exchange Server

Microsoft Exchange Server database EDB files may generate numerous error messages due to corruption that leads to unable to open them. To overcome such a situation, an efficient Exchange Server recovery software may prove to be an apt solution to be opted in order to resolve the error messages and to restore the corrupt MS Exchange Server EDB database files.

Product: Exchange Server

Event Type: Error Event

Source: ESE Event

Category: General

Event ID: 489

Computer: Computer Name

Message: <Process Name> (<Process ID>) <Storage Group Name> An attempt to open the file “<file name>” for read-only access failed with system error <error code>: “<error message>”. The open file operation will fail with error <error code>.

Explanation

An unexpected error was encountered while trying to open a file.

The following phrase appears in the event description:

An attempt to open the file [path/file name] for read-only access failed with [Error Code and Explanation]. The open file operation will fail with error [Error Code].

The actual cause of EventID 489 depends on the error listed at the end of the description section of the event. The most possible occurred error messages alongwith their reasons and solutions are discussed as follows:

Error – 1032 - JET_errFileAccessDenied - Cannot access file

Reasons:

The file is locked or is in use.

Another process has stolen the file.

A virus checker may erroneously quarantine a file.

A backup process may temporarily deny access.

A flat file backup system or antivirus software may be running against the database or check file directories.

Permissions on the folder constituting files for information stores are not sufficient for the stores to function properly.

Solution:

Grant default permissions to folder constituting Exchange database files and to the drive where this folder resides.

Configure flat file backup and antivirus software to not scan the Exchange database sub-directories.

Use an online backup or an antivirus software.

Error – 1022 – JET_errDiskIO – Disk IO Error

Reasons:

A disk input/output (I/O) problem prevents Exchange from gaining access to a requested page in the database or to a check file.

A disk or controller failure occurs, and access to entire drive lost (may be temporarily).

The path for the check file is not correct caused due to drive failure.

Solution:

Execute chkdsk/f/r command at the run command prompt.

Check valid permissions on Exchsrvr folder structure.

Confirm that system has full control over Exchsrvr and all sub-folders on each partition containing Exchange data.

Troubleshoot any Windows NT file-level antivirus software running on the Exchange Server.

Check the System Log for I/O or drive errors.

Check and correct the path for the check file.

Correct the root cause, then restore the database from online backup in case a recent backup exists.

Error – 1023 – JET_errInvalidPath – Invalid file path

Reasons:

Change in the path for log files or check files before system restoration.

A corrupt check file or temporary file created while defragmentation or repair.

A corrupt file may generate such an error even if file path is correct.

Solution:

Move Exchange database files back to their original locations and restore again.

In case .chk file is corrupt, remove it and read all transactions into the database.

In case database remains inconsistent, restore it from online backup if a recent backup exists.

Kernel for Exchange Server is an email recovery tool that assists in recovering corrupt or damaged MS Exchange Server database files. The software creates a new EDB database having all recovered files that can be easily mounted to the Exchange Server. The utility supports MS Exchange Server 5.0, 5.5, 2000, 2003, 2007 and 2010 versions.  You should must visit this site for seeing detail http://www.edbtopstconverter.softwaredatarecovery.net/

[exchangeserver]

Solving Jet Error - "JET_errRecordNotFound, the key was not found", “Jet_errRecordDeleted”

Other reasons for corruption of MS Exchange Server EDB files or generation of error messages includes deleted mailboxes, unable to initialize the MS Exchange Information Store service, duplicate keys (Identifiers), etc.

The minorly corrupted Exchange Server EDB files can be resolved using Eseutil.exe utility. In case EDB files are severely corrupted, it may generate an error message:

"JET_errRecordNotFound, the key was not found", “Jet_errRecordDeleted”

On generation of such an error message, the inbuilt utility Eseutil.exe fails to recover email data that further makes database inaccessible and data loss. The cause of generation of such an error message may be difference in structures of EDB and STM files or severely corrupted Exchange database file structure.

Some other JET Engine Exchange Dirty Shutdown errors are:

# JET_errBadDbSignature-531

# JET_errDatabaseStreamingFileMismatch-540

# JET_errDatabaseDirtyShudown-550

# JET_errConsistentTimeMismatch-551

# JET_errInvalidDatabaseId-1010

# JET_errInvalidDatabase-1028

# JET_errFileInvalidType-1812

# JET_errDatabaseCorruptedNoRepair-1224

A third-party tool Kernel for Exchange Server repairs and recovers corrupt, damaged, or inaccessible Exchange database EDB files by converting them to PST files that can be easily accessed using MS Outlook. The software repairs Priv1.edb database file with complete accuracy and supports all versions of MS Exchange Server, MS Outlook and Windows Operating systems. For further information, you can visit and know more about the product and its usage.http://www.edbtopstconverter.softwaredatarecovery.net/

[exchangeserver]

Repair Priv1.edb file that got corrupt due to size exceeded

Priv1.edb file that got corrupt or damaged due to exceed in size limit which is 16 GB does not allow mounting it on Exchange Server and becomes inaccessible. The corrupt Priv1.edb files may generate some error messages. Some of them are as follows:

“JET_errRecordNotFound, the key was not found”, “JET_errRecordDeleted”.

“The system cannot find the path specified”.

“Unable to initialize Microsoft Exchange Information Store service”.

“Database contains serious errors and cannot be automatically repaired”.

“Error opening Message Store”.

“The database engine found a bad page”.

“The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time”.

“The Microsoft Jet database engine cannot open the file ‘(unknown)’. It is already opened exclusively by another user, or you need permission to view its data”.

“Unable to initialize DAO/JET DB Engine”.

Use a third-party email recovery software – Kernel for Exchange Server that repairs and recovers corrupt or damaged Priv1.edb or Pub1.edb MS Exchange Server database files. The software extracts user mailboxes from corrupt or damaged Exchange database and saves them in PST or EDB file formats. Compatible with all versions of MS Exchange Server, MS Outlook and Windows Operating Systems, the software accurately and flawlessly repairs corrupt Priv1.edb as well as Pub1.edb files of MS Exchange Server. For further information, one can visit the official link http://www.edbtopstconverter.softwaredatarecovery.net/

[exchangeserver]

Convert Novell GroupWise to Lotus Notes

Convert single as well as multiple Novell GroupWise user mailboxes to Lotus Notes NSF files using technologically-advanced Kernel for Novell GroupWise to Lotus Notes. The software converts GroupWise emails, contacts, tasks, calendar, etc. to Lotus Notes NSF files. Equipped with advanced email migration algorithms, the software performs accurate migration process.

While performing single GroupWise user mailbox conversion to Lotus Notes NSF file, the software offers three modes – Default Mode, Login Mode and Command Line Mode. On the other hand, for performing multiple GroupWise user mailboxes conversion to Lotus Notes mailboxes, the software requires creating an Excel file or a batch file.

While performing the migration process, software preserves original formatting, structure and properties of Novell GroupWise user mailboxes. The software fully supports Unicode characters for conversion and offers easy-to-use, self-explanatory, user-friendly interface such that even novice users can easily operate the utility. The software allows converting archived mailbox items and saves recovered email items in HTML or Text format.

The software supports all versions of Novell GroupWise, Lotus Notes, MS Excel and Windows operating system. The available free demo version allows users to analyze its features and capabilities. The trial version saves only first 10 items of every mailbox folder into Lotus Notes NSF file. To save all GroupWise mailbox items to Lotus Notes, purchase licensed version of the product.  More information about GroupWise to Lotus Notes migration at here http://www.groupwisetonotes.com/

[exchangeserver]

Migrate Lotus Notes to Novell GroupWise

Migrate single or multiple Lotus Notes NSF files as well as Domino Server user mailboxes to Novell GroupWise user mailboxes in a single migration cycle using Kernel for Lotus Notes to Novell GroupWise. The software migrates emails, calendars, address books, appointments, tasks, sent items, drafts, journals, calendars and every other item existing in Lotus Notes NSF files to Novell GroupWise user mailbox.

The software allows merging multiple Lotus Notes NSF files in a single Novell GroupWise user mailbox and supports Unicode character conversion. The tool allows saving converted emails in Text and RTF file formats and offers filtering options to save only selected email items in Novell GroupWise user mailbox. Live Preview feature embedded in the software allows previewing contents of selected NSF file. The software is integrated with feature to migrate View folder items alongwith other email folders.

Equipped with advanced algorithms and self-explanatory GUI, the tool supports all versions of Lotus Notes, Domino Server and Novell GroupWise for performing the email migration process. The available free to download trial version allows its users to experience its capabilities for free. Free trial version displays preview of email items stored in NSF files and saves only 10 email items per email folder in Novell GroupWise user mailbox. To save all the migrated email items, purchase the full version of the software. Visit Migrations from Lotus Notes to Novell GroupWise on the web http://www.notestogroupwise.com/

[exchangeserver]

Convert Exchange to Lotus Notes

Convert MS Outlook PST files to Lotus Notes NSF files using prominent email migration utility – Kernel for Exchange to Lotus Notes. The software allows accessing Outlook data with Lotus Notes after performing the email migration process. The migrated MS Outlook PST file email items can be saved in new or existing Lotus Notes NSF file.

The software is embedded with advanced email conversion algorithms and supports Unicode character for performing the migration. The tool is compatible with every version of Lotus Notes, MS Outlook and Windows operating system.

The entire migration process consists of only three simple steps – Select the PST file, Export it and Save the migrated email items in new or existing Lotus Notes NSF file. The software converts each and every email item of MS Outlook PST file including emails, contacts, sent items, drafts, journals, calendars, notes, appointments, alarms, tasks, attachments, images, text formatting, email properties, items in deleted folder and every individual folder.

The software is available with a free trial version that lets its users to experience its features, functionalities and capabilities. The free trial works almost similar to that of the full version but has a limitation that it allows saving only first 10 emails and other items per folder of PST file. To save all the migrated email items, purchase the licensed version of the software.Get More detail -  http://www.exportoutlooktonotes.net/

[exchangeserver]

Migrate Exchange to Novell GroupWise mailbox

Migrating single or multiple user profile(s) from MS Exchange to Novell GroupWise platform is now not more a complex task, as we have Kernel for Exchange to Novell GroupWise to perform it in a much easier manner with complete accuracy. The tool allows saving converted MS Outlook PST files, MS Outlook profiles and MS Exchange Server user mailboxes in Novell GroupWise user mailbox.

The software even migrates large-sized MS Exchange user mailboxes and PST files and MS Exchange sharing lists gets converted to Novell GroupWise distribution lists after migration. The password-protected PST files or user profile accounts and public folders can be easily exported to Novell GroupWise mailbox folders using this tool while maintaining data integrity. The tool offers option to save converted PST files in Text or HTML file formats and allows selecting specific time period to filter the email items based on date range in order to optimize the migration process.

The tool supports all versions of MS Exchange Server, MS Outlook, Novell GroupWise and Windows Operating System platforms. The easy-to-use, self-descriptive, user-friendly graphical user interface offered by the software makes migration process much easier even for a novice user.

Download evaluation version of the software for free and analyze its features and capabilities before making actual purchase. Free trial version works almost similar to the full version of the software but with a limitation that it migrates only 10 email items from every folder of Exchange to Novell GroupWise mailbox. Purchase the full version of the software to save all the migrated email items and to avail all the functionalities offered by the product.  For more information and help please visit : - http://www.exchangetogroupwise.com/

[exchangeserver]

Convert OST to PST

Perform MS Exchange OST recovery in order to access emails, contacts, journals, notes, tasks, drafts, calendars, and all other email items of inaccessible OST files by converting them to easily accessible MS Outlook PST files using Kernel for OST to PST. The need for conversion from OST files to PST files may arise in case of accidental user account deletion on Exchange Server, corrupt Exchange Server, server crash, Exchange database corruption, Exchange Server downtime, etc. The software performs the conversion process without requiring original MS Outlook profile.

Embedded with advanced algorithms, the tool supports migration of OST files generated with any version of MS Outlook and Exchange Server. The tool allows saving email items just by selecting a date from a date range and offers Find Message option to ease searching and finding email items. The tool displays preview of recovered email items in a tree-like structure that can be saved in PST, DBX, MSG and EML file formats easily accessible with MS Outlook and Outlook Express.

The tool migrates even password-protected OST files to PST files. Emails having any file format like Plain Text, RTF and HTML are easily recoverable by this prominent tool. Email properties such as subject, to, from, cc, bcc, date and time, attachments including documents and images are easily recovered during the migration process.

The available free evaluation version allows its users to analyze its features and capabilities. If satisfied with the performance of the trial version, purchase the full version of Convert OST to PST software to save all email messages in PST file format.

[exchangeserver]

Migrate Novell GroupWise to Exchange

Migrate multiple user mailboxes from Novell GroupWise to Microsoft Exchange Server in a single go using Kernel for Novell GroupWise to Exchange software. The tool also converts single Novell GroupWise user mailbox to PST file. The tool allows applying date filter to convert only data lying within specified date range. The software offers various filters for performing selective conversion of user mailboxes in batch mode. The tool supports Unicode character conversion and converts all email data including attachments, calendars, contacts, Sent Items, documents, checklist, folders, trash items, Work in Progress, email properties, images, orphan folders, cabinet of user mailboxes, etc.

The software allows creating Excel file database and a .NUCON batch file for batch of GroupWise user mailboxes. The advanced options make the migration process much easier. Using this utility, the archived items can also be migrated easily. Use this tool to migrate from Novell GroupWise server environment to MS Exchange server environment. The tool saves migrated items in Exchange user profiles and new PST files.

The tool supports every version of Novell GroupWise, MS Exchange Server and MS Outlook and is available as free demo version. The free trial version works almost similar to that of the full version but has a limitation that it saves only first 10 emails per folder from every existing folder in the user mailbox. Purchase full version of the software to save every email item of GroupWise user mailbox. See  http://www.softwaredatarecovery.net/groupwisetopst.html

[exchangeserver]

How to Move Novell GroupWise and Microsoft Office 365

A Brief Introduction - Novell GroupWise and Microsoft Office 365

Microsoft Office 365 enfolds both MS Office Suite and Microsoft Server family of programs. It is available in three editions: Office 365 for Enterprise, Office 365 for Students and Office 365 for small organizations. You can use Office 365 to share office documents with friends and colleagues online. Microsoft Office 365 uses cloud based applications like MS Share Point Server, MS Exchange Server or Lynx Server for storage of Outlook emails, Office Documents, Spreadsheets and many more.

About GroupWise to Office 365 migration

Many organizations prefer to migrate from GroupWise to Office 365 email environment due to several limitations as mentioned below:

Poor in-house data storage facility

Low protection of sensitive information

High cost of data storage and infrastructure maintenance

Migration from Novell GroupWise to Office 365 Cloud environment reduces data management cost of an Organization. A cloud based application like Office 365 store documents, emails, spreadsheets and other files in a cloud or Web Server. Thus sensitive data of an Organization in a cloud based infrastructure are managed by third party Web applications that reduces the use of in-house storage facility.

Key Benefits of GroupWise to Office 365 migration

Important office documents, emails and attachments can be stored on a host server or site

User can access all documents of a cloud system from a remote PC, Cell Phone or Tablet that have internet access

Multilayered security and access restriction features of Office 365 that ensures complete privacy of sensitive data

Easy sharing of emails and documents to friends and colleagues on same or different web servers.

Office 365 Migrator for GroupWise

Office 365 Migrator for GroupWise is a professional tool that can export several GroupWise mailboxes to Office 365 in flawless manner. It successfully extracts email folders such as contacts, checklist, cabinet, trash items, work-in-progress and others from a GroupWise mailbox and sends in the Cloud system maintained by Microsoft. The software fully supports migration of UNICODE characters from GroupWise mailbox.

GroupWise to Office 365 converter allows conversion of several GroupWise user mailboxes to Office 365 in batch mode. It also conversion of Single GroupWise user mailbox to Cloud in five modes i.e., Default mode, Login mode, Online mode, Caching mode, Remote mode and Command mode. Office 365 Migrator for GroupWise shows all Migrated Novell GroupWise mailboxes of a network in an Excel Sheet. You can preview all migrated mailbox items by this tool in a HTML or plain text form. The software supports different versions of Novell GroupWise Server, MS Excel and MS Window. For more information about groupwise to office 365, please visit here -  http://www.groupwisetooffice365migration.com/