fluffenough

[fluffenough]

Just thought you should know that hasbro has announced an official long furby

No this is not a joke

Kids these days. Back in my day we had to put the long in the furbies ourselves. We had to skin the furbies for tumblr. There was no other choice.

[fluffenough]

I got this little lattice-y wall candleholder some months back and have tried it in various places with no good success. I just now hung it here and immediately wanted to put my Emoto-Tronic Furby in it so bad.

I knew she would be too big to sit into the balcony part, but I'm doing it anyway. Cause I love how she suits the spot, it's just perfect.

[fluffenough]

Assorted Furby sketches.

[fluffenough]

I've been sitting on this pattern and tutorial for a while now! so time to finally share it with you! I was lamenting that the jellycat pip and sugar mice were long retired and difficult to get your hands on unless you are willing to pay much more than they retailed for each mouse, so i decided to try and eyeball a pattern and make some myself! they're not exact as i only used constructed visual references but they're close! please note that this pattern set is intended for personal use only. Rough tutorial under the cut!

This pattern is for printing onto A4 but you can check your scale with the measurements I've provided or just play around with how big or small you want to try and make them! i didn't really get any wip photos of pip mouse but it's method is largely the same with the nose being the major change, which i will detail in text in the instructions below.

for sugar mouse i would recommend using polar fleece as it will act the right way for the ears to do their squishy marshmallow looking thing. but minky should also work or other similar fabrics! for pip mouse if you can find a similar curly looking fabric with a thin backing that'll be ideal but fleece will also work well, you just wont get the furry texture, you want a fabric with a little bit of stretch to it. i however would not recommend fabrics like felt or non stretch cotton for these guys as it's likely to not take shape the same as there's no give to the fabric.

once you have printed out the pattern and cut the pieces in your fabric, you'll want to sew the ears up and turn them inside out, then put them aside for later. just leave them as is for now but here you can see i was playing around with pinching the turned through ear into shape.

Then moving on, sew the back pieces together along the spine and front of face. you then want pull the bottom open ends apart gently and place the open sides flat up against the base piece so that they're aligned, it can be good to pin this in place so it doesn't shift.

then, get your tail rope, and tie a knot at either end, placing the base of it inbetween the seam at the butt so that it'll sit in the right place, then sew the seam up directly with the tail in place, make sure you sew through the rope to secure it and make sure it doesnt shift. Sew around the bases seam leaving a hole in one side so that you can then turn your mouse through.

once turned through you will want to stuff your mouse with polyfill quite a bit so it takes shape! i like to put weighted beans in mine for extra effect, you can use dried rice or wheat too, just sew a little circle pouch a bit smaller that the mouses base with scrap fabric and fill and seal! then insert into the turning hole while you stuff. once stuffing is done you can sew the hole up with a ladder stitch. the weight from the beads will allow your mouse to sit up quite well.

next you will want to get those ears you put aside, take each corner and bring the ends together in the middle. then sew them gently together at the ends with one or two stitches in about the same spot. you want them to look 3d so dont sew the ends to the back of the ear, just end to end so they meet in the center.

Then pin the ears in place on the head

then you need to ladder stitch the ears in place while they're pinned so they dont shift around, go all the way around the outside edge of each.

now you're almost done! next they just need a face! sugar mouse only needs embroidery by way of a french knot for both the eyes and nose (you can find good video tutorials on how to sew a french knot online), pip mouse will also need a french knot for the eyes but has a separate process for it's nose. (for the pip mouses nose you will need to leave the marked nose hole open and then stitch the nose fabric to the square nose backing in line with the dotted direction on the pattern, (it should look kind of baggy when it's unstuffed) sew it up completley with no hole, then cut a tiny slit in the backing and add polyfill there before closing with a basic stitch, then you ladder stitch the nose directly to the marked nose hole)

in order to hide the embroidery anchor knots i find the best way is to start by going down through the middle of the ears and then coming back up where you want the eye to be, and then going back down and up through the ear for the finishing knot, as it creates a very easy cover for them and looks nice and clean!

then you have yourself a little buddy!

haha they're great to squish! if you use this pattern i'd love to see your results!

[fluffenough]

furby custom compilation post!!!

happy new year!! here's a lil selection of some of my favourite customs i've made :) i haven't had much time to work on furbies lately, but this year i'd like to try and post a little more regularly and make more customs!! maybe open commissions again??

in other news, i made a buy me a coffee !! if you enjoy my content please consider supporting ^_^ ♡

[fluffenough]

🌙⭐️ sweet dreams from mama furby and her two babies goose and chicken ⭐️🌙

[fluffenough]

oh to be a little furby baby napping without a care in the world

[fluffenough]

This is Lobster, my beautiful Red Velvet 2005 Furby!

I got this little guy sometime last year, and he's easily one of my favorite 2005 Furbys I own! :D

For a good 2 or 3 years, I was looking for a Red Velvet with the Olive eyes, so I was thrilled when I scored him for quite a good deal!

He's been all restored and brushed out to look good as new, and I'm very happy with how he turned out : ]

I'm very glad to have this guy within my collection!

Anyway, I hope y'all enjoyed the photoshoot ❤️🧡💛💚💙

[fluffenough]

Takumi Toyland on Instagram shared photos they found of two unreleased Furblets.

Also, Wadha on Instagram sent a post by influensterfunnn, who shared a photo of another unreleased Furblet (third image).

[fluffenough]

i have literally 70+ photos to post on here that i need to edit and write captions for... it might be good to work on a queue eventually

im thinking id like to write alt text, too, but mannn

[fluffenough]

i'm making a zine about furby fashion!

inspired by the stylish furby (jpn) (eng) magazine that was released by tomy in 1999, but this time featuring the energy of what the modern furby fandom has become in 2025 (anarchic/queer/DIY/subversive/surreal/filtered through several layers of internet brain).

you can let me know if you're interested in contributing here! i'll do my best to reply to everyone ASAP, deadline for this volume is March 1st, but if there's enough interest i may publish more in the future?

also i do most of my Furbyposting on my instagram if you wanna follow me there.

please note that this is for artists 18 & over, just because i want to be wary of different legislation around collecting & sharing folks' information - but you can always make your own zine!

[fluffenough]

im so glad this is getting some attention!

every reblog spreads the word further & allows more people to know how to repair these sweet guys

id blaze this if i wasnt poor, lol. it isnt my idea and i take no credit, i just never saw any repair ideas except replacing the entire beak and this is genius

i was amazed that this japanese twitter user has figured out 2005 beak repair! (link to OP & original post) they explained in another comment that they use silicone rubber used for sealing/repairing bathroom tiles for the beak! this is all just google translate, but i feel this is REALLY valuable bc ive never seen such a simple but effective way to repair these beaks. details below:

seriously need to test this... this is HUGE

[fluffenough]

i was amazed that this japanese twitter user has figured out 2005 beak repair! (link to OP & original post) they explained in another comment that they use silicone rubber used for sealing/repairing bathroom tiles for the beak! this is all just google translate, but i feel this is REALLY valuable bc ive never seen such a simple but effective way to repair these beaks. details below:

seriously need to test this... this is HUGE

[fluffenough]

at least i was able to post my christmas photos!

i took a huge set of fall and halloween photos with my autumn furby, but i didnt have the spoons to post them all...

i have a ton of spring photos to post, too. maybe i will use my queue one of these days

[fluffenough]

I thought this tablecloth matched Akeso perfectly, and so did the jolly old man beside them!

[fluffenough]

Akeso couldn't quite believe their eyes! There was a Christmas town where they were as big as a giant!