forwon123-blog

[forwon123-blog]

Understanding the Different Types of Heat Exchangers

HVAC stands for Heating, Ventilating, and Air Conditioning, and is the science of controlling heat, air and humidity. The system works by using a variety of methods. The primary method is ventilation, which is how hot or cold air is moved from one place to another. It also includes the use of duct work and filters.

Heating and cooling are important to everyone in the home. Most homes have an evaporative cooling system that uses condensation to keep hot things cold. The air is also heated by using a central furnace. Many homes now have central heating systems, but they can become outdated quickly and are sometimes not as efficient as they were originally. For these and other reasons, HVAC professionals are needed to keep all of these systems working at peak efficiency. These professionals have to be able to identify the right type of system for a home and make sure that it is maintained correctly.

A heating and cooling expert specialize in the areas of HVAC, that is used in the home and the location of that system. This is the reason that these specialists must be licensed by the state. HVAC professionals also perform routine inspections on heating and cooling equipment in order to make sure that they are in working condition.

When you hire a professional for your HVAC system, you are assured of a reputable company with many years of experience in the business. They will perform the testing and repair of the HVAC equipment. They will also be able to advise you on which type of system is best for your situation.

An HVAC Brazed Plate Heat exchanger is one of the most popular types of equipment in homes today. These pieces of equipment to allow for efficient heating and cooling of the air and water. The plates are made from copper or aluminum and placed in the floor of the room where the heating or cooling system is installed. These plates are placed in the HVAC ducts and filters. As air and water moves through the ducts, the plates absorb heat or cold depending on the temperature in the air or the water.

The forwon.com HVAC Heat exchanger is essential because it absorbs and redirects the heat or cold from the atmosphere or the water in the ducts. it then takes that heat or cold back into the rooms where the units are located. It does this in a very efficient way. This allows for efficient and effective heating and cooling of the air and the rooms.

There are many different types of HVAC Heat exchangers to choose from, and each has its own advantages and disadvantages. Choosing the right one is very important when selecting a heating and cooling professional.

Because of the many options and benefits of the system, HVAC professionals are usually very good at choosing the right type of system for your needs. They will make sure that your system is installed properly so that it will work efficiently in the long run. When a problem occurs, they will be able to fix it quickly and efficiently in order to ensure that the system will be able to continue to operate effectively.

The different types of HVAC Brazed Plate Heat exchanger are designed to handle various situations. The different systems include the following. The first system is the convection system. This is the most common in homes and businesses because of its ability to handle hot and cold air. It has an exchanger that sits between the heat and the air or water.

Another type of system called the split heat exchanger is designed to handle hot air or water that is traveling down the ducts. This type of system is used in industrial applications.

A third system called the compression system can be used to provide both hot and cold air or water flow through the HVAC Brazed Plate Heat exchanger. This is very beneficial in some situations where air or water can be heated in the system at the same time.

[forwon123-blog]

Application status of heat exchanger

The heat exchanger has developed from a tube heat exchanger before the 1920s to a plate heat exchanger today, and the industry's permeability has also increased. The heat exchanger can be divided into two types: tube type and plate type: tube type can be divided into tube and shell type, sleeve type and fin type; plate type can be divided into plate fin type, plate shell type and spiral plate type. The application of heat exchangers is also becoming more and more extensive. Heat exchangers play an important role in the fields of petroleum, chemical industry, metallurgy, electricity, ships, heating and heating, refrigeration and air conditioning, machinery, food, pharmaceuticals and other fields.

Especially in the petroleum and chemical industries, the application of heat exchangers accounts for 30% of the total market share, the market capacity exceeds 20 billion yuan, and the overall growth rate of industry demand is expected to be 10% to 15%. . During the production process of petroleum and chemical industry, all processes have heating, cooling or condensation processes, so there are many places where heat exchangers can be used. In the two major industries of power and metallurgy, there are many applications of heat exchangers. In addition, in the areas of central heating, refrigeration and air conditioning, the shipbuilding industry, the food industry, and the pharmaceutical industry, the amount of heat exchangers is also large, which makes heat exchangers continue to play an important role in various industries.

[forwon123-blog]

About how to disassemble plate heat exchanger

Plate heat exchanger is a new type of high-efficiency heat exchange equipment, which has been widely used in many industries such as power engineering, shipbuilding, metallurgy, petroleum, chemical industry, food and light industry. The sugar industry in foreign countries is used a lot. There are several sugar factories in China, some of them are used well, but some of them have more problems and stop using them. Therefore, detailed research on related technical issues is needed. The newly purchased heat exchanger has been assembled into a whole and can be installed as a whole. It should not be disassembled unless necessary. Disassembly and reinstallation of the plate heat exchanger is a very meticulous work, which needs to be performed by experienced personnel according to certain rules to ensure that the seal is good and can be used normally after installation. Improper assembly and disassembly and installation will cause poor sealing and deformation and damage of the plate, making it difficult to recover. Before disassembling the heat exchanger, use a steel ruler to measure the original thickness of the plate group. It should be measured and recorded separately at the upper, lower, left, and right corners of the device. This thickness should be restored as much as possible during reinstallation. If the number of plates is increased or decreased, the correct total thickness should be calculated first. The difference between the thickness after installation and the nominal value should be less than 1%, and the thickness in the above example should be between 491 and 501mm. Plate heat exchangers are usually pressed into a whole with 6 to 12 bolts. These bolts should be tightened or loosened evenly during assembly and disassembly. When removing the loosening bolt, loosen the middle bolt first and then to the four corners. 1-2 laps each time at first, and more later, repeat many times to fully release. It is required that during the relaxation process, the total thickness of the plate is measured at the four corners, and the deviation between the left and right does not exceed 10mm, and the deviation between the upper and lower does not exceed 25mm. When tightening the bolts, tighten the four-corner bolts first, then the middle bolts, small by small, and repeated many times. It is required that the asymmetric deviation of the total thickness of the plate group during the tightening process does not exceed the above value. A certain length of spanner should be used for assembling and disassembling bolts to make the applied torque appropriate. The fastening bolts of plate heat exchangers are often equipped with small flat bearings, which are installed at the bottom of the compression nut to reduce the surface friction force when tightening the bolts and make the bolts' tightening force appropriate. When tightening or loosening the bolt, the other end is controlled by the end cap and cannot be rotated. After the heat exchanger is disassembled, the plates should be hung on the body support. If it needs to be removed for cleaning, it should be placed on a smooth platform. It should not be placed on uneven ground, and multiple plates should not be stacked in order to avoid The plate is bent and deformed. Each plate should be hung back to its original position after cleaning. Do not use a hammer. The stainless steel sheet will be hammered to cause changes in the internal structure and reduce its rust resistance. After checking that all the plates and gaskets are normal, tighten the bolts and reset them. Forwon Plate Heat Exchanger will save your time in disassemble  and seldom broken.

[forwon123-blog]

Method for improving thermal efficiency of plate heat exchanger

The technology is increasingly mature, with high heat transfer efficiency, small size, light weight, low dirt coefficient, easy disassembly, multiple plate varieties, wide application range, and has been widely used in the heating industry. The plate heat exchanger is divided into detachable type, welding type, brazing type, plate and shell type according to the assembly method. As the detachable plate heat exchanger is easy to disassemble and clean, the area of ​​the heat exchanger is flexible to increase and decrease, and it is used more in heating projects. The detachable plate heat exchanger is limited by the heat-resistant temperature of the rubber seal, and is suitable for water-to-water heat transfer. In this paper, the optimization design of improving the efficiency of removable plate heat exchangers is studied.

The forwon plate heat exchanger is a wall-to-wall heat exchanger. Cold and hot fluids transfer heat through the plates of the heat exchanger, and the fluid is in direct contact with the plates. The heat transfer methods are heat conduction and convective heat transfer. The key to improve the heat transfer efficiency of the plate heat exchanger is to increase the heat transfer coefficient and the logarithmic average temperature difference.

The design thickness of the grate plate has nothing to do with its corrosion resistance, and it is related to the pressure capacity of the heat exchanger. Thicker plates can increase the pressure capacity of the heat exchanger. When the herringbone plate combination is used, adjacent plates are inverted, and the corrugations contact each other, forming a dense and evenly distributed fulcrum. The plate corner L and the edge sealing structure have been gradually improved, which makes the heat exchanger Pressure endurance. The maximum pressure capacity of domestic detachable plate heat exchangers has reached 2.5 MPa. The thickness of the plate has a great influence on the heat transfer coefficient. The thickness is reduced by 0.1mm. The total heat transfer coefficient of the symmetrical plate heat exchanger is increased by about 600 W / (m/ K), and the asymmetric type is increased by about 500 W / (m/ K). ). On the premise that the pressure capacity of the heat exchanger is satisfied, the plate thickness should be selected as small as possible.