hicasmachinery-blog

[hicasmachinery-blog]

2 張相片 相片擁有者 andy han

[hicasmachinery-blog]

The knowledge point of sliding table panel saw

Sliding table panel saw can be used for a variety of wood-based panels such as veneer particleboard, fiberboard, plywood and wood, plastic, and other materials Aluminum Alloy profile crosscutting, and wide application of the furniture industry and vehicle manufacturing wood processing industry, which belongs to the general woodworking machinery equipment, the market demand is relatively large.

With the artificial board manufacturing industry in the application of a large number of furniture, building decoration industry and other industries, the traditional general circular saw both the machining precision, and production efficiency of all already cannot satisfy the needs of the process. Therefore, all kinds of special machine for circular saw sheet material of a woodworking sliding table panel saw has been developed rapidly from. The low productivity of manual feed or feed machinery of small and medium-sized panel saw, to have a high degree of automation and productivity with a digital controller or computer program optimization and with a variety of large combined automatic loading and unloading mechanism of the vertical sawing plate system, manufacturing, construction and decoration in furniture, vehicle manufacturing and other industries has been widely used in precision. For cutting saw to plywood, particleboard, fiberboard, plywood, laminated board, blockboard, wood mosaic and plastic sheet for longitudinal cutting, sawing and transverse or angle In order to obtain the size of the plate to meet the requirements of the specification, but also can be used for a variety of insulation board, thin aluminum plate and aluminum cutting.

Sliding table panel saw size

Conventional size is 2.8 m, 3 m, 3.2 m, 3.8 m.

Sliding table panel saw usually divided into cylindrical guide and linear guide.

Cylindrical guide is a bit more smooth, more difficult to deformation and damage

Host structure:

The main part of the sliding table panel saw, including bed, worktable, longitudinal section transverse guide plate, main saw, scoring saw, transmission and other components. The structure and working principle of common circular sawing machine is similar, and can be used as ordinary circular sawing machine.

The sliding table panel saw constituent part

1) frame; 2) main saw part; 3) slot saw part; 4) transverse guide baffle plate; (5) fixed working table; 6) sliding push table; 7) oblique saw guide plate; 8) bracket; 9) oblique saw angle display device; lateral guide baffle.

 The main structure characteristics of precision sliding table panel saw is the use of two blades, namely main blade and scriber. When cutting, scoring saw ahead of sawing, the Machined plates of the bottom surface of the first saw draw depth is 1 ~ 2mm, width of the main blade groove thickness of 0.1 ~ 0.2mm, to ensure the main blade cutting kerf edge can not be torn, so as to obtain good cutting quality. Scriber with smaller diameter, usually around 120mm, driven by a single motor. The rotary speed of the blade is above 9000r/min, the cutting speed is 56 ~ 60m/s. scriber is aligned with the main blade in the same vertical plane. The main blade diameter of &8943; a 300 ~ 400mm from the main motor through the belt transmission. According to the different diameter of main saw blade and plate processing, the main blade can use variable cone, cone gear has the advantages of simple structure, is a constant power output, comparison In line with the actual needs of wood processing. The power of the motor is generally 4 ~ 9kw. to make a simple speed by a special triangle belt, ensure power transmission with a single belt. The main blade can rotate speed is 3000 ~ 6000r/min, and the distance between the main blade scriber is generally around 1OOmm.

Another panel saw the main structure characteristics of the saw blade and the main blade is crossed immovable, pushed by hand by carrying movable table plate made of aluminum processing before and after the move, realize the sawing processing. Due to the structure of the mobile station by rail J special, so the manual feeding is light and labor-saving when driving and, the processing precision is very high.

Precision sliding table panel saw rice bed mostly Yong 5 ~ 6mm thickness of the welded steel, stable and beautiful, can ensure the early sawing processing without generating tilt and twist fixed working table is fixed on the bed, Saikawa casting, require smooth, no deformation, and is provided with a longitudinal cutting plate and its regulation institutions.

The structural characteristics of mobile worktable:

Push the moving table is the key part of the panel saw. The main part of the mobile worktable are different from ordinary circular sawing machine comprises a bracket, guide, roller, push table and other components, its remarkable characteristic is:

(1)The operation is light and labor-saving, and the stroke is large, and the amplitude of the cutting plate is large.(2) trailers, with stable light stable operation; (3) setting and the main blade moving table for 45 degrees of adjustment, expand the scope of the use of some of the sawing machine sawing machine is attached with milling device, groove and groove width between 30-50MM processing can be carried out.

Using the operating characteristics of the panel saw:

Its fine cutting saw through the dynamic balance and static balance, generally do not need to put the foundation, can be added on a flat surface. The machining operation, the workpiece is placed in a mobile work table, hand push mobile platform, so that the workpiece feed movement. The operation is very convenient, flexible operation should be used time Caution!, prevent the occurrence of accidents.

[hicasmachinery-blog]

The knowledge point of sliding table panel saw

Sliding table panel saw can be used for a variety of wood-based panels such as veneer particleboard, fiberboard, plywood and wood, plastic, and other materials Aluminum Alloy profile crosscutting, and wide application of the furniture industry and vehicle manufacturing wood processing industry, which belongs to the general woodworking machinery equipment, the market demand is relatively large.

With the artificial board manufacturing industry in the application of a large number of furniture, building decoration industry and other industries, the traditional general circular saw both the machining precision, and production efficiency of all already cannot satisfy the needs of the process. Therefore, all kinds of special machine for circular saw sheet material of a woodworking sliding table panel saw has been developed rapidly from. The low productivity of manual feed or feed machinery of small and medium-sized panel saw, to have a high degree of automation and productivity with a digital controller or computer program optimization and with a variety of large combined automatic loading and unloading mechanism of the vertical sawing plate system, manufacturing, construction and decoration in furniture, vehicle manufacturing and other industries has been widely used in precision. For cutting saw to plywood, particleboard, fiberboard, plywood, laminated board, blockboard, wood mosaic and plastic sheet for longitudinal cutting, sawing and transverse or angle In order to obtain the size of the plate to meet the requirements of the specification, but also can be used for a variety of insulation board, thin aluminum plate and aluminum cutting.

Sliding table panel saw size

Conventional size is 2.8 m, 3 m, 3.2 m, 3.8 m.

Sliding table panel saw usually divided into cylindrical guide and linear guide.

Cylindrical guide is a bit more smooth, more difficult to deformation and damage.

Host structure:

The main part of the sliding table panel saw, including bed, worktable, longitudinal section transverse guide plate, main saw, scoring saw, transmission and other components. The structure and working principle of common circular sawing machine is similar, and can be used as ordinary circular sawing machine.

The sliding table panel saw constituent part

1) frame; 2) main saw part; 3) slot saw part; 4) transverse guide baffle plate; (5) fixed working table; 6) sliding push table; 7) oblique saw guide plate; 8) bracket; 9) oblique saw angle display device; lateral guide baffle.

The main structure characteristics of precision sliding table panel saw is the use of two blades, namely main blade and scriber. When cutting, scoring saw ahead of sawing, the Machined plates of the bottom surface of the first saw draw depth is 1 ~ 2mm, width of the main blade groove thickness of 0.1 ~ 0.2mm, to ensure the main blade cutting kerf edge can not be torn, so as to obtain good cutting quality. Scriber with smaller diameter, usually around 120mm, driven by a single motor. The rotary speed of the blade is above 9000r/min, the cutting speed is 56 ~ 60m/s. scriber is aligned with the main blade in the same vertical plane. The main blade diameter of &8943; a 300 ~ 400mm from the main motor through the belt transmission. According to the different diameter of main saw blade and plate processing, the main blade can use variable cone, cone gear has the advantages of simple structure, is a constant power output, comparison In line with the actual needs of wood processing. The power of the motor is generally 4 ~ 9kw. to make a simple speed by a special triangle belt, ensure power transmission with a single belt. The main blade can rotate speed is 3000 ~ 6000r/min, and the distance between the main blade scriber is generally around 1OOmm.

Another panel saw the main structure characteristics of the saw blade and the main blade is crossed immovable, pushed by hand by carrying movable table plate made of aluminum processing before and after the move, realize the sawing processing. Due to the structure of the mobile station by rail J special, so the manual feeding is light and labor-saving when driving and, the processing precision is very high.

Precision sliding table panel saw rice bed mostly Yong 5 ~ 6mm thickness of the welded steel, stable and beautiful, can ensure the early sawing processing without generating tilt and twist fixed working table is fixed on the bed, Saikawa casting, require smooth, no deformation, and is provided with a longitudinal cutting plate and its regulation institutions.

The structural characteristics of mobile worktable:

Push the moving table is the key part of the panel saw. The main part of the mobile worktable are different from ordinary circular sawing machine comprises a bracket, guide, roller, push table and other components, its remarkable characteristic is:

(1)The operation is light and labor-saving, and the stroke is large, and the amplitude of the cutting plate is large.(2) trailers, with stable light stable operation; (3) setting and the main blade moving table for 45 degrees of adjustment, expand the scope of the use of some of the sawing machine sawing machine is attached with milling device, groove and groove width between 30-50MM processing can be carried out.

Using the operating characteristics of the panel saw: 

Its fine cutting saw through the dynamic balance and static balance, generally do not need to put the foundation, can be added on a flat surface. The machining operation, the workpiece is placed in a mobile work table, hand push mobile platform, so that the workpiece feed movement. The operation is very convenient, flexible operation should be used time Caution!, prevent the occurrence of accidents.

[hicasmachinery-blog]

hope we can make business relationship with you

We are Professional woodworking machine factory,if you have any question please contact us with no hesitation,thank you.

Sale manager：Victor feng Phone:+8618661623877            +8613356888297 Skype：victorfeng121 Email：victor@hicasmachinery.com

[hicasmachinery-blog]

We are Professional woodworking machine factory,if you have any question please contact us with no hesitation,thank you.

Sale manager：Victor feng Phone:+8618661623877            +8613356888297 Skype：victorfeng121 Email：victor@hicasmachinery.com

[hicasmachinery-blog]

good quality woodworking machine

Wood Floor Furniture Sanding Machine Plywood Sander

Wide belt sander application:

solid wood,MDF,plywood,floor,wood door and windows.

So suitable for furniture factory!!

List some questions below we think you may want to know, if you have more doubts, we are right here to help you.

1,Why does sanding machine application?

—-Sanding machina application:solid wood panels,wood floor,wood board,plywood,chipboard,laminat,the surface of groove,joinery board,multilayer board,integrated timber,wooden doors,wooden windows,arts and crafts,and glass steel.

2,What size of sanding machine is right for me?

—Max working width of sanding machine:400mm,630mm, 1000mm, 1300mm,1600mm.

—Min working length of sanding machine: 500mm.

—Thickness:3 to 110mm

Considering your own usage, you can know which size sanding machine you need. Or pls kindly let me know your workpiece size,we will recommend to you.

3,After knowing the size, then which model is right for me?

—You could choose right model sanding machine in our alibaba store,or pls kindly let me know your workpiece’s size, then we could recommend you right model with best price.

4, After knowing the right model, then what’s price?

—Different model with different price.You could reference price top,finally price depends on our discuss result.

5, What’s your warranty?

—In 12 months.

6, What’s youe lead time?

—In 15 to 30 working days.

7, What’s your delivery term?

—FOB Qingdao China usually, also can be CIF/DDU/DDP to your side if you need.

8, What’s your payment term?

—30% T/T deposit, balance T/T payable before delivery after inspection.

9, What’s the HS code of sanding machine?

—In China it is 8465930000

[hicasmachinery-blog]

Wood Floor Furniture Sanding Machine Plywood Sander

Wide belt sander application:

solid wood,MDF,plywood,floor,wood door and windows.

So suitable for furniture factory!!

List some questions below we think you may want to know, if you have more doubts, we are right here to help you.

1,Why does sanding machine application?

----Sanding machina application:solid wood panels,wood floor,wood board,plywood,chipboard,laminat,the surface of groove,joinery board,multilayer board,integrated timber,wooden doors,wooden windows,arts and crafts,and glass steel.

2,What size of sanding machine is right for me?

---Max working width of sanding machine:400mm,630mm, 1000mm, 1300mm,1600mm.

---Min working length of sanding machine: 500mm.

---Thickness:3 to 110mm

Considering your own usage, you can know which size sanding machine you need. Or pls kindly let me know your workpiece size,we will recommend to you.

3,After knowing the size, then which model is right for me?

---You could choose right model sanding machine in our alibaba store,or pls kindly let me know your workpiece's size, then we could recommend you right model with best price.

4, After knowing the right model, then what's price?

---Different model with different price.You could reference price top,finally price depends on our discuss result.

5, What's your warranty?

---In 12 months.

6, What's youe lead time?

---In 15 to 30 working days.

7, What's your delivery term?

---FOB Qingdao China usually, also can be CIF/DDU/DDP to your side if you need.

8, What's your payment term?

---30% T/T deposit, balance T/T payable before delivery after inspection.

9, What's the HS code of sanding machine?

---In China it is 8465930000

[hicasmachinery-blog]

How to control the edge quality

Edge edge quality is influenced by many internal and external factors.Including equipment condition, raw material condition and operation skilled.Edge banding machine manufacturer（hicas）suggest that 6 condition should be more attentioned at anytime.

（1）when you use thickness edgeband for banding,nip roll should in the best position.Because all most problem is owing to pressure too tight.Edgeband is longer compare for workpiece so When the feed roller presses the edge with a longer section to the edge with a perpendicular to the feed direction of the force,at this time the glue is not completely cured,the bonding strength is not high the tail and releasable adhesive is not strong.

  （2）The indoor temperature can not be too low when machining in general should be more than 15 DEG C, especially with a thick edge, flexibility will be insufficient, to ensure the normal operation of the preheating device, without preheating device can be used when the hair dryer heating method makes edgeband softening, this method is especially suitable to the curve edge. It's not the processing workshop.

 The edge banding influence edgeband quality.Good quality with edge sealed products at tight edge.The edge of poor quality of the products with a seal edge gap is large, there is a clear line.Trimming machine when backing easily in the surface scrape marks.Thick edge from the cross section, the glue should be slightly concave on both sides of the central than at the edge, edge products with a letter is tight, the effect is good.

 （3）Water wood edge material rate is not too high, should be stored in a cool and dry room, material requirements without dust, the optimum water content in 8-10%.

 （4）The edge is fast, adhesive under low pressure have good dispersion and on the permeability of the matrix, to have a good initial viscosity and pressure in a short period of time should be instantly glued bond. When used to ensure hot melt temperature in the normal temperature range, long time high temperature will make the glue; low temperature hot melt adhesive to reach good fluidity, when used to grasp the supplier data.

 （5）Hot melt adhesive coating should be glued to make parts outside slightly extruding whichever is too large, there is a black line at the edge, the influence is beautiful; too small, not enough. In order to test the bonding strength of adhesive film is continuous, can use transparent hard PVC test can also be brought; ordinary edge band edge, while the glue is not cooling the edge tear test.

 （6）The front edge machine using milling cutter device manufacturers, semi-finished products to the edge cutting quality can affect the sealing effect. In order to prevent the explosion of products manufacturers generally used when cutting edge notch (commonly known as small saw blade), the best effect after cutting should be able to see a small section of saw marks but feels like not too deep. The small blade marks edge sealing edge at the prison, can see a black line can even see the gap, too shallow and explosive.

 ^�2����

[hicasmachinery-blog]

Professional woodworking machine factory

[hicasmachinery-blog]

automatic edge banding machine for woodworking

[hicasmachinery-blog]

Woodworking Finger Joint Line

1.Guide rail of finger joint shaper’s conveyor is japan precision linear guide rail to gurantee the

shaping accuracy .

2.The design for finger joint shaper is double blades+tooth-tenon knife assembly to  provide high

precision.

3.The conveyor table of finger joint shaper adopts German pneumatic hydraulic conveyor system

to control bakc and forth ,smoothly,low maintenance,high quality .

4.The second push part of finger joint assembler adopts long+short double pushing board design,

by this kind of structure ,it can assemble very short workpiece to reduce the cost .

5.Whole machine is conveniently operated by PLC Central integrated programmable controller..