imaec-digital - Tumblr blog

[imaec-digital]

Cidaltek W10

Description:

Proper disinfection and cleaning of dental work surfaces are vital in preventing infectious pathogens’ transmission to healthcare workers and patients. The CDC defines disinfection as the destruction of pathogenic microorganisms, physically or chemically. It offers guidelines on environmental surface disinfection for dental offices. Environmental surface disinfection is the cleaning and disinfecting of non-critical environmental surfaces using low-level to intermediate-level surface disinfectants.

CidalTek-W10 is a multi-component disinfectant containing Hydrogen peroxide as an oxidizing agent with combination of stabilizing agents to form a complex solution. A long-lasting disinfectant effect is achieved with addition of silver ions to the formula. It is Non-Carcinogenic, Bio-Degradable, Eco-friendly, and most importantly easy to use highly effective in dental clinic & dental labs.

Composition: Each 100 ml contains

Salient Features:

Broad spectrum against micro-organisms

Penetrates the biofilms formed by microorganisms

Sporicidal in action

Environment friendly & Bio-degradable

Non-Carcinogenic

Generates highly reactive hydroxyl radical in synergy with Ag+

Tasteless, Colorless & Odorless disinfectant

No toxic disinfection by-products

Direction Of Use:

For Surface & Environmental Disinfection

Add 100 ml (10%) of CidelTek-W10 disinfectant to 900 ml of water and mix well, apply on surface for 30 min contact time.

For Sporicidal action on surface use 20% Conc. Solution of CidalTek-W10 for 60 min contact time.

After thoroughly wetting the surface with lint free cloth, mop, sponge.

Treated surface must remain wet for respective contact time & allow to air dry.

Use 2-3 Bucket system for surface cleaning & disinfection

For Aerial Disinfection

Add 200 ml (20 %) of CidalTek W10 in 950 ml of water for 1000 cubic feet area.

For Sporicidal action on use 20% Conc. Solution of CidalTek-W10 for 60 min contact time.

Fogging machine should be mounted 2-3 feet from the floor level.

The angle of fogger machine kept at approximately 45 degrees.

Ensure the room is thoroughly cleaned before & after fogging with CidalTek W10 solution.

Area Of Application:

In the dental operatory to decontaminate environmental surfaces.

For disinfection of housekeeping surfaces (floors, walls, and sinks) have risk of disease transmission in dental healthcare settings.

For disinfection of dental environmental surfaces by removing organic matter, salts, and visible soils in dental settings such as area in dental laboratory, bathroom, and reception room in dental.

Soil surfaces (e.g., Blood, or body fluid) disinfection at dental clinic.

For disinfection of walls, and other vertical surfaces which are visibly contaminated by blood or OPIM (Other Potentially Infectious Material) in dentistry.

For cleaning and disinfection of environmental surfaces including blood and body substance spills.

For disinfecting spills of blood and other body fluids in dental clinic.

For aerial fogging in dental surgery unit, labs etc.

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal, Tuberculocidal, Virucidal & Sporicidal.

[imaec-digital]

Cidaltek Surgical Scrub 4% CHG

CidalTek-Surgical Scrub 4% chlorhexidine-gluconate based solution that can be used as a handwash and a surgical scrub. This hand wash has been specially designed to prevent infections, which are infections that originate from dental patient & dental clinic. This surgical scrub is effective against a range of fungi and bacteria.

Colour: Ponceau 4R & Tartrazine

Pack Size: 5 Lit.

Salient Features:

Alcohol and Quat free formulation

CHG based formulation which provides persistent and long- lasting residual effect

Recommended as per CDC & WHO for antiseptic hand wash and pre-operative surgical hand scrub

Antiseptic and Surgical Hand Scrub for Critical Areas

Enriched with emollient and moisturiser

Broad spectrum antimicrobial action

Excellent residual activity

Skin compatible

Clinically proven to help reduce bacteria on hand & skin

No staining

Healthcare personnel handwash

Recommended for routine use in dental OPD to reduce cross infection.

Direction Of Use:

Antibacterial Hand Wash: Apply 6ml CidalTek-Surgical Scrub 4% CHG on wet hands. Rub hands for 30 seconds using proper hand washing technique. Rinse hands thoroughly and dry.

Surgical Hand Scrub: Apply 6ml CidalTek-Surgical Scrub 4% CHG on wet hands and forearms. Rub hands for 2-3 minutes using proper hand washing technique. Pay close attention to nails, grooves & inter-digital spaces. Rinse hands and forearms thoroughly and dry with sterile towel.

Pre-operative Skin Preparation: Apply appropriate amount of CidalTek-Surgical Scrub 4% CHG liberally to surgical site for at least 2 min. Dry with a sterile swab or towel. Repeat.

Skin wound and general skin cleansing: Thoroughly rinse the area to be cleaned with water. Apply the minimum amount of the product necessary to cover the skin or wound area and wash gently. Rinse thoroughly with water.

Area Of Application:

Antibacterial hand disinfection

Healthcare personnel handwash

Surgical hand disinfection

Pre-operative skin preparation

Skin wound and general skin cleansing

Before and after treating each dental patient

Before donning sterile surgeon’s gloves for dental surgical procedures and after glove removal

After barehanded touching of inanimate objects likely to be contaminated by blood or saliva

Before leaving the dental operatory or the dental laboratory

When hands are visibly soiled

Microbial Efficacy:

CidalTek-Surgical Scrub containing Chlorhexidine Gluconate Solution IP 4% w/v that is highly-effective against Bacteria, MRSA, MSSA, Fungi, Yeast, Viruses, and other microbes.

[imaec-digital]

Cidaltek SS

Package size:

500 ml, 1 litre and 5 litres

Area Of Application:

• The spirit is applied to the surface of the skin for use as a cleansing agent

• Antiseptic purpose

• Used for skin preparation before injection

• Surface Disinfectant- Dental platform

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal.

[imaec-digital]

Cidaltek SHDP1

Package size:

100 ml, 500 ml, 1 litre and 5 litres

Area Of Application:

• Skin antiseptics

• Pre- operative skin preparation in clinical practices.

Microbial Efficacy:

Active against bacteria including MRSA, mycobacteria, fungi, enveloped viruses.

[imaec-digital]

Cidaltek SHDE45

Description:

Better Choice for Hand Hygiene:

CidalTek-SHDE45 hand rub comprehensive antimicrobial activity and rapid action of ethanol & propanol help in improved compliance with hand hygiene. CDC recommends the use of alcohol-based hand sanitizers with greater than 60% ethanol or 70% isopropanol as the preferred form of hand hygiene in dental healthcare settings, based upon greater access to hand sanitizer. Dental health care providers who use alcohol-based hand sanitizers as part of their hand hygiene routine can inform patients that they are following CDC guidelines.

Salient Features:

Ready to use alcohol-based hand hygiene solution

Hand disinfection for sensitive skin

Instant action

Broad spectrum antimicrobial- kills germs 99.99% effectively on hand & skin

More effective than soap at killing potentially deadly germs on hands

Rapid Action

Require less time than handwashing

More accessible than handwashing sinks

Low risk of allergies

No water required

Are self-drying

Active against bacteria incl. MRSA, mycobacteria, fungi, enveloped viruses, and rotavirus

Excellent virucidal activity

Improves skin condition with less irritation and dryness than soap and water

Product passes EN 1500 (Hygienic Hand Rub)

Product passes EN 12791 (Surgical Hand Rub)

It gives best Hand hygiene compliance as per WHO hand hygiene compliance monitoring in dental college & clinic

Direction Of Use:

Hand Hygiene Solution: Ready to Use. (For external use only)

Use 6 ml (4 pushes of dispenser) of CidalTek-SHDE45 to rub palms for 30-60 seconds, front back to front and in-between your fingers until the liquids covers your hands & air dries. Do not wash hands with water after using the alcoholic rub. Follow the protocol of hand hygiene techniques as per WHO & CDC guidelines.6

Surgical Hand Disinfection: Ready to Use. (For external use only)

Use appropriate amount of CidalTek-SHDE45 to rub palms, front back to front and in-between your fingers until the liquids covers your hands till the elbow & air dries. The contact time in between 1.5 – 3 minutes. Do not wash hands with water after using the alcoholic rub. Follow the protocol of surgical hand preparation techniques as per WHO & CDC guidelines.

Hygienic hand disinfection: 30-60 seconds

Surgical hand disinfection:5 – 3 minutes

Note: - Product should be used in accordance with label instruction

Area Of Application:

As per WHO and CDC recommendation for hand hygiene & skin antisepsis practices

Routine hygienic hand antisepsis if hands are not visibly soiled

Use as surgical hand disinfection before conducting dental surgeries

For rapid hand disinfection in dental clinics

For use before & after dental patient contact

Before leaving the dental treatment area

Before and after treating each dental patient for dental procedures

Before putting on gloves and again immediately after removing gloves

After barehanded touching of instruments, equipment, materials, and other objects likely to be contaminated

Applying alcohol hand rub between patient visits and during disruptions for each appointment, prevents the spread of infectious agents in the dental practice setting

To avoid the cross contamination/ transmission via hand

At dental OPD, Clinic, mobile dental clinic, dental screenings at a school, consulting room, visitors room, canteen, administration office etc. use as standard hand hygiene solution.

For dental professionals, including dentists, dental assistants, dental hygienists, students, and practice managers use best practice in hand hygiene.

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal, Tuberculocidal, Mycobactericidal   & Virucidal.

[imaec-digital]

Cidaltek PI7.5

Package size:

500 ml, 1 litre and 5 litres

Area Of Application:

• Antiseptic and disinfectant agent

• It is used for the treatment and prevention of infections in wounds and cuts

• For preparation of the skin prior to surgery

• Helps to reduce bacteria that potentially can cause skin infection

• For handwashing to reduce bacteria on the skin

• Significantly reduces the number of microorganisms on the hands and forearms prior to surgery or patient care

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal

[imaec-digital]

Cidaltek PI5

Package size: 500 ml, 1 litre and 5 litres

Area Of Application:

• Antiseptic and disinfectant agent

• It is used for the treatment and prevention of infections in wounds and cuts

• Preparation of skin prior to surgery

• Emergency microbicidal treatment of cuts and abrasion

• It is used to disinfect the surface of the skin before and after surgery or an injury

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal

[imaec-digital]

Cidaltek PI5

Package size: 500 ml, 1 litre and 5 litres

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal

[imaec-digital]

Cidaltek PI4

Package size:

500 ml, 1 litre and 5 litres

Area Of Application:

• For dental surgeon’s surgical hand wash before starting oral examination/dental procedure

• It is also used to sanitize the skin before a surgical procedure is performed

• Used to prevent and treat minor wounds and skin infections

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal.

[imaec-digital]

Cidaltek PI2

Package size:

500 ml, 1 litre and 5 litres

Area Of Application:

• Antibacterial Gargle Solution

• For oral hygiene/ Mouth wash

• Antiseptic Oral Rinse can be used to prepare the oral mucosa prior to injection, dental surgery, or tooth extraction

• Oral rinse that may be given during or after dental procedures

• Treatment of Mouth infection, Sore throat, Dry mouth

• Treatment and prevention of Wound infection

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal.

[imaec-digital]

Cidaltek PI 10

Package size:

500 ml, 1 litre and 5 litres

Area Of Application:

• Antiseptic and disinfectant agent

• It is used for the treatment and prevention of infections in wounds and cuts

• For preparation of the skin prior to surgery

• Helps reduce bacteria that potentially can cause skin infection

[imaec-digital]

Cidaltek OPA

Description:

CidalTek-OPA is a high-level disinfectant to disinfect the heat sensitive semi-critical medical devices. CidalTek-OPA having excellent material compatibility & suitable for reprocessing of dental instruments made of rubber, plastic, metals etc. It has excellent stability over a wide.

pH range (pH 3–9), is not a known irritant to the eyes and nasal passages & does not require exposure monitoring, has a barely perceptible odour, and requires no activation. CidalTek-OPA has excellent microbicidal activity, across a range of microorganism.

Salient Features:

High level disinfectant for dental instrument tools & devices

Ready to use

No activator required

Product activity check by OPA indicator strip

Fast-acting: fast turnaround of reprocessed dental instruments.

Achieves high-level disinfection in short contact time

Short contact time

Efficient 12-minute soak time at 20°C for manual reprocessing

Long-lasting efficacy - reusable for up to 14 days when monitored with CidalTek OPA Test Strips

Effective against glutaraldehyde-resistant Mycobacterium/Tuberculocidal strain

Sporicidal action with contact time 3 hrs

Non rusting formulation

Flexible reprocessing

Excellent material compatibility

Suitable for manual disinfection of compatible semi-critical medical and dental devices.

Direction Of Use:

Firstly, wear the entire PPE and start with contaminated medical device, tools, or instrument pre-clean with soap & water/enzymatic cleaner solution.

Medical device fully immerses in ready to use solution of CidalTek OPA in tray in a such way that all devices completely deep in solution

Immerse for minimum 12 minutes at 20°C for disinfection.

after the recommended contact time, rinse the dental devices, tools instruments etc. with water of at least sterile water quality and dry. During the rinse, use enough water to completely cover the appliance and leave the appliance in the water for at least 1 minute. Repeat this process 2 -3 more times. Make sure that a new water supply is provided for each rinse. Do not reuse water for rinsing or other purposes. Now instrument able to use.

Area Of Application:

For disinfection of dental patient care items (dental instruments, critical, semi-critical dental equipment, tools etc.)

OPA is indicated for dental semi-critical instruments that comes into contact with mucous membranes or broken skin, such as specula, laryngeal mirror & internal ultrasound probes.

For disinfection of dental semi critical and critical medical devices (surgical instruments, extraction forceps, bone chisels, periodontal scalers, scalpel blades, surgical dental burs, dental mouth mirror, amalgam condenser, air/water syringes reusable dental impression trays, dental handpieces, endodontic files)

To disinfect contaminated dental instruments and devices through percutaneous injury in dental settings.

Use for objects and tools which are visibly contaminated by saliva, mucous and Other potentially infectious material in dental clinics and hospitals.

For dental clinic, lab instruments

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal, Tuberculocidal, Pseudomonacidal & Virucidal.

[imaec-digital]

Cidaltek IP

Description:

Instant action:

CidalTek-IP hand rub is the most effective, rapid in action to kill germs. Kills germs 99.99% effectively on hand.

Better Choice for Hand Hygiene:

CidalTek-IP hand rub comprehensive antimicrobial activity and rapid action of isopropanol 75% v/v help in improved compliance with hand hygiene. CDC recommends the use of alcohol-based hand sanitizers with greater than 60% ethanol or 70% isopropanol as the preferred form of hand hygiene in dental healthcare settings, based upon greater access to hand sanitizer. Dental health care providers who use alcohol-based hand sanitizers as part of their hand hygiene routine can inform patients that they are following CDC guidelines.

WHO recommended hand rubs have proven efficacy in COVID-19 & emerging viruses:

CidalTek-IP hand rub containing isopropanol 75% v/v which was recommended as per WHO formulation.  Which is efficiently inactivated SARS-CoV-2 viruses in within 30 seconds.4 The study conducted with WHO-recommended alcohol-based formulations demonstrated a strong virucidal effect against emerging pathogens, including ZIKV, EBOV.

Active Ingredients Quantity

Isopropyl Alcohol IP 75 % v/v

Hydrogen Peroxide IP 0.125% v/v

Glycerol IP 1.45% v/v

Salient Features:

WHO Recommended Formulation

Alcohol-Based Hand Hygiene Solution

Instant action

Kills germs 99.99% effectively on hand

More effective than soap at killing potentially deadly germs on hands

Rapid and Prolonged Action

Require less time than handwashing

More accessible than handwashing sinks

No water required

Are self-drying

Effective against MRSA & VRE, Drug resistance pathogens

Excellent virucidal activity

Improves skin condition with less irritation and dryness than soap and water

Skin protective-Dermatologically compactible

Product passes EN 1500 (Hygienic Hand Rub)

It gives best Hand hygiene compliance as per WHO hand hygiene compliance monitoring in dental college & clinic

Direction Of Use:

Hand Hygiene Solution: Ready to Use. (For external use only) 

Use 6 ml (4 pushes of dispenser) of CidalTek-IP to rub palms for 60 seconds, front back to front and in-between your fingers until the liquids covers your hands & air dries.

Do not wash hands with water after using the alcoholic rub. Follow the protocol of hand hygiene techniques as per WHO & CDC guidelines.

Note: - Product should be used in accordance with label instruction

Area Of Application:

      As per WHO and CDC recommendation for hand hygiene practices

Routine hygienic hand antisepsis if hands are not visibly soiled

For rapid hand disinfection in dental clinics

For use before & after dental patient contact

Before leaving the dental treatment area

Before and after treating each dental patient for dental procedures

Before putting on gloves and again immediately after removing gloves

After barehanded touching of instruments, equipment, materials, and other objects likely to be contaminated

Applying alcohol hand rub between patient visits and during disruptions for each appointment, prevents the spread of infectious agents in the dental practice setting

To avoid the cross contamination/ transmission via hand

At dental OPD, Clinic, mobile dental clinic, dental screenings at a school, consulting room, visitors room, canteen, administration office etc. use as standard hand hygiene solution.

For dental professionals, including dentists, dental assistants, dental hygienists, students, and practice managers use best practice in hand hygiene.

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal.

[imaec-digital]

Cidaltek IMS

Package size:

500 ml, 1 litre and 5 litres

Area Of Application:

• The spirit is applied to the surface of the skin for use as a cleansing agent

• Antiseptic purpose

• Used for skin preparation before injection

• Surface Disinfectant- Dental platform

• Used as antiseptic alcohol solution in skin preparation during sterile procedures

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal.

[imaec-digital]

Cidaltek E70

Package size:

500 ml, 1 litre and 5 litres

[imaec-digital]

Cidaltek E

Description:

Instant Instrument/Surface Disinfectant:

CidalTek-E disinfectant having comprehensive antimicrobial activity and rapid action of ethanol & isopropanol. Alcohols are effective at eliminating vegetative bacteria and viruses from surfaces. The antimicrobial effectiveness of alcohol is through damage to bacterial cell membranes and subsequent denaturation of cellular proteins. A more effective alcohol is isopropyl alcohol (IPA), which is fast acting and possesses a broad-spectrum antimicrobial activity. When alcohols are used in combination, such as IPA and ethanol, the antimicrobial action is arguably greater. This is because IPA is slightly more efficacious against bacteria, whereas ethanol is more potent against viruses. The combination of the two makes for an effective disinfectant product.

CDC has divided noncritical surfaces in dental offices into clinical contact and housekeeping surfaces. Clinical contact surfaces are surfaces that might be touched frequently with gloved hands during patient care or that might become contaminated with blood or other potentially infectious material and subsequently contact instruments, hands, gloves, or devices (e.g., light handles, switches, dental X-ray equipment, chair-side computers). Barrier protective coverings (e.g., clear plastic wraps) can be used for these surfaces, particularly those that are difficult to clean (e.g., light handles, chair switches). Protected surfaces should be disinfected at the end of each day or if contamination is evident. If not barrier-protected, these surfaces should be disinfected between patients with an intermediate-disinfectant disinfectant with tuberculocidal claim) or low-level disinfectant (disinfectant with an HBV and HIV label claim).

Salient Features:

Ready to use alcohol-based disinfectant solution

Aldehyde-free

Instant action

Kills germs 99.99% effectively

Quick drying

Leaves no stains/ residue behind

Effective against MRSA & VRE, Drug resistance pathogens

Excellent virucidal activity

Direction Of Use:

Rapid Dental Equipment /Instruments/Hard Surfaces Disinfection: Ready to Use. (For external use only) rapid disinfectant with comprehensive spectrum of activity for alcohol-resistance surfaces and dental devices.

CidalTek-E is suitable for the rapid disinfection of hard surfaces in the spray-wipe procedure, where a rapid effect is necessary, e.g., for dental equipment, instruments, dental chair, platform, dental tooth cast formation platform etc.

Wipe the surfaces to be disinfected, with enough ready-to use solution, ensuring complete coverage.

Rapid disinfection of hard surfaces of any dental equipment 30 seconds exposure time.

Always prefer a wipe disinfection by using lint free cloth over the spray disinfection, as it prevents the formation of aerosols and ensure best possible wetting.

When spraying, wipe afterwards, if possible, to ensure complete wetting

Contact Time: 30 seconds to 5 Minutes 

Note: - Product should be used in accordance with label instruction

Area Of Application:

Rapid disinfection of dental instruments, equipment, materials, and other objects which frequently come in contact with hands.

For rapid cleaning and disinfection of sensitive dental equipment surfaces

For immediate disinfection of dental chair, equipment & accessories, waste receivers, hand pieces in kidney plates, specially used on “spitting areas” of dental chairs

Also used on inanimate surfaces in dental hospital/clinical/labs

Hard surface of frequently touch surfaces in dental hospital like dental chair handle, door knob, switches, holders, examination table, seating chairs, OPD, consulting rooms, clean touch screens, sensitive equipment, switches, dental Xray equipment, chair-side computers etc.

For cleaning and disinfection of surfaces that are most likely to become contaminated with pathogens including clinical contact surfaces in patient care areas in dental clinics such as, switches on dental chairs, computer equipment, keyboards, computer mouse, dentist chair arm, patient chair arm, dental tool handles, dental receptionist countertops, bathroom door knob, operatory cabinet handles, dentist light, clinic phones, door knobs, operatory sink faucet etc

Microbial Efficacy:

Bactericidal, Fungicidal, Yeasticidal & Virucidal.

[imaec-digital]

Cidaltek DR LS13N

Description

In the dental clinic setting, the potential for pathogen transmission from staff to patients (as well as from patients to staff) is of main concern. Sources of infectious microorganisms include contaminated body fluids (e.g., saliva and blood), improperly sterilized equipment/instruments, surface contamination and airborne transmission. Proper disinfection and cleaning of dental work surfaces are vital in preventing infectious pathogens’ transmission to healthcare workers and patients. The CDC defines disinfection as the destruction of pathogenic microorganisms, physically or chemically. It offers guidelines on environmental surface disinfection for dental offices. Environmental surface disinfection is the cleaning and disinfecting of non-critical environmental surfaces using low-level to intermediate-level surface disinfectants.1-2

CidalTek 5th Gen. QACs is a heavy-duty disinfectant cleaner that cleans, disinfects, and deodorizes in one labor saving step. It is a one-step disinfectant cleaner that is effective against a broad spectrum of bacteria, is virucidal (including HIV, Hepatitis B Virus, and Hepatitis C Virus), fungicidal and inhibits the growth of mold and mildew. It is a Mildewstat and will effectively inhibit the growth of mold and mildew and the colors caused by them when applied to as directed on hard nonporous surfaces. It able to kills avian influenza AH3N2 (and) H5N1 on precleaned environmental surfaces.

How to Use:

For Surface Disinfection

Add 4 ml (0.39%) of CidelTek 5th QACs disinfectant to 1 Lit. of water and mix well.

For Heavy duty usage add 16 ml in 1 Lit. of water for 10 min contact time

For sporicidal activity use 20 ml (2%) in 1 Lit. of water for 30 Min contact time

After thoroughly wetting the surface with lint free cloth, mop, sponge & sprayers or by immersion.

Treated surface must remain wet for respective contact time & allow to air dry.

Use 2-3 Bucket system for surface cleaning & disinfection

For Aerial Disinfection

Add 4 ml (0.39%) of CidalTek 5th QACs in 1 Lit. of water for 1000 cubic feet area.

Fogging machine should be mounted 2-3 feet from the floor level.

The angle of fogger machine kept at approximately 45 degrees.

Ensure the room is thoroughly cleaned before & after fogging with CidalTekR-82 solution.

For Sporicidal use 20 ml (2% concentrated solution) in 1 Lit of water for 1000 cubic feet.

For effectiveness of aerial disinfection take Pre & Post Air count by routine air settle plate/Active air sampler count.

For Mold & Mildew Control

At 4 ml per litre of water, CidalTek-5th QACs disinfectant will effectively inhibit the growth of mold & mildew and the odours caused by them when applied to hard, non-porous surface.

Follow disinfection instruction.

Repeat treatment every seven days, or more often if new growth appears.

Dental Clinic/ Lab Facilities

CidalTek 5th QACs disinfectant kills HIV/HBV & HCV on pre-cleaned environmental surface/object previously soiled with blood/body fluids in dental clinic and lab.

CidalTek-5th QACs disinfectant will work effectively even in presence of blood/body fluids which can be associated with the potential for transmission of blood borne pathogens.

Contact time 10 minutes should be strictly followed.

Note:

1) Before using disinfectant read the product label & instruction carefully

2) Use appropriate PPE before handling disinfectant

3) Use freshly Prepared disinfectant