Don't wanna be here? Send us removal request.
Statistics
We looked inside some of the posts by kdmglobal and here's what we found interesting.
Average Info
Notes Per Post
0
Likes Per Post
0
Reblog Per Post
0
Reply Per Post
0
Time Between Posts
4 hours
Number of Posts By Type
Text
17
Last Seen Tumblr Blogs
Fun Fact
In Q3 of 2020, 31% of US users access the Tumblr app daily.
Text
Fire Testing Equipment & Cone calorimeter test apparatus Supplier
Throughout the test, the test specimen is exposed to flame, and the combustion chamber effectively traps most of the smoke. Under active flame circumstances, a specimen of 25 mm x 25 mm x 6 mm is burned in the test chamber using a propane burner that is running at a pressure of 276 kPa (40 psi). A light source, photoelectric cell, and metre are installed in the 300mm x 300mm x 790mm test chamber to evaluate light absorption horizontally across the flammability.
Furniture and Mattresses' Flammability
Testing the flammability of mattresses and furniture is crucial for assuring consumer fire safety. The measurement of heat release, smoke release and opacity, combustive gas release, and total mass loss during these flammability tests is done in a burn room. In this kind of flammability test, mattresses or furniture are set ablaze using a lighted cigarette or a sizable open flame to see how they would do in both accidental and deliberate flames.Any flame front that forms after lighting is observed, and the movement of the flame front horizontally along the length of the specimen is recorded in terms of how long it takes to reach different lengths.
• The findings are presented in terms of the flame spread history in terms of distance and time, the flame front velocity in terms of heat flux, the critical heat flux at extinguishment, and the average heat for prolonged burning.
Reports of flammability testing carried out by independent third parties in flammability testing labs are typically used to demonstrate compliance with these criteria. The intended purpose of a product must also be clearly stated on any warning labels that are prescribed by jurisdictions. If these conditions are not met, market access may be denied or regulatory authorities may take enforcement action.
As a result of KDM Global's global reach, we are also able to support supply chain oversight initiatives and make sure that the products and materials we obtain comply with your other criteria and specifications as well as flammability regulations.
Testing for flammability can help you predict how your items will respond.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire & Electrical and Electronics Testing Equipment Supplier
When used with the Elevated Temperature Oxygen Index device (TOI), the Oxygen Index can be used to calculate the oxygen index at temperatures up to 125°C.
The Mass Loss Calorimeter and Cone Calorimeter can be utilised to ascertain When combined with a cone corrosimeter, the cone calorimeter and mass loss calorimeter can be used to assess the corrosive impact of combustion products. To do this, the unit's produced materials are forced through a dynamic exposure cell that contains a copper corrosion target. To evaluate the corrosive impact of the combustion products created, the corrosion target's change in resistance is used.
• The Door is made of clear polycarbonate sheet that is laminate-backed for strength and stiffness, allowing full access to the Chamber for simple cleaning.
• Should the flame go out, the gas burner's spark ignition system will immediately re-ignite.
• For use with colorimetric Gas Reaction Tubes or optional particular Gas Analyzers, 15 sampling points are offered.
• The Flowmeters, Timer, Methane, and Air Controls are housed in a separate control unit.
• A forced-air extraction mechanism for cleaning up the test chamber.
• Internally mounted stirrer for blending combustion products quickly.
Software:
• Free software is included with the instrument. Free software updates are offered.
This apparatus ignites a test specimen using a gas-fired radiant heat panel with a pilot flame.
• Immediately after lighting, any flame front that forms is noticed, and its horizontal movement down the specimen's length is recorded.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire & Textile Testing Equipment Supplier
Sample holders for both rigid and flexible samples are provided; Test chimney measuring 450 mm 75 mm is quickly loaded; Digital display of oxygen percentage in atmosphere during test (no calculations required); Digital display of temperature of gas mixture entering the test chimney; Shortened gas path for quick response
The following are some alternatives: Thermopile and chimney for assessing heat release; Corrosimeter for corrosivity research; Enclosure and gas supplies to permit use in low oxygen atmosphere cone calorimeter testing
Windows-based applications:
Simple data capture, analysis, and management are made possible by a Windows-based software suite. Windows-based software: Using a 22-bit data logger, a Windows-based software package offers straightforward data gathering, processing, and storage.
The EN 61034 - 1 standard mandates that the variations in a light beam's transmittance be observed inside a 27m3 chamber with the light source installed on the side opposite to the one where the light receiver is positioned in order to be able to measure and assess the actual density of the fumes produced by cables that burn under specified conditions.
Starting from these ideas, SIF designed and produced a novel system with qualities that are superior to those of the instrumentation put forth by rivals.
Our skilled professionals use flammability test procedures to assess materials during the research and development stages or to or legal requirements. As a well-known expert in materials testing, Element has facilities all throughout the US and Europe that are prepared to help with the most difficult testing tasks.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire & Building Materials Testing Equipment Supplier
The measurements are done in terms of the reduction in light transmission through a volume of smoke that has been collected and created according to controlled, defined conditions. Model code groups use this test to regulate the usage of plastic materials in applications that emit light. Because this test method can easily be utilised on thermoplastic materials that may be difficult to test with the ASTM E84 smoke measurement test KDM GLOBAL also carries further smoke test equipment, such as the ASTM E1354 Cone Calorimeter and E662 Smoke Density Chamber.
As a result, the SIF research and development team took on the problem and created a single system that could satisfy all the needs.
Testing for flammability is a crucial step in guaranteeing the safety and reliability of consumer goods. The textile and consumer goods, aerospace and transportation, bedding, and furniture materials industries all use flammability test methodologies. Features: • New Paramagnetic Oxygen Cell to measure precise oxygen levels ( 0.1%);
• Small unit with ventilation for effective use inside a lab hood
By manipulating a single valve, automatic flow control provides oxygen level adjustment. Testing for flammability can help you predict how your items will respond to flame and fire exposure. We employ approved testing procedures that can be found in the standards of the International Organisation for Standardisation (ISO), American National Standards Institute (ANSI), ASTM International (ASTM), and National Fire Protection Association (NFPA). We are able to test items from a variety of industries to determine whether they comply with international requirements thanks to our familiarity with these standards and our knowledge in the field of fire safety.
In addition to being a good safety practise, knowing how your items will behave when they are exposed to flames and fire is an essential part of winning over customers.We can assist you in finding the answers to these queries, which will help you develop that trust.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire Testing Equipment : Material Behaviour
Horizontal and Vertical Flammability Testing
Flammability test procedures gauge a material's susceptibility to ignition, rate of combustion, and burn response. Depending on the Bunsen burner's configuration, the materials are arranged either vertically or horizontally. A material is tested for vertical flammability by measuring how long it continues to burn after the starting flame has been extinguished, how much of the specimen burns, and whether or not it drips flaming particles. In contrast, horizontal flammability tests determine the rate of burning by first determining whether the material keeps burning after the test flame is extinguished.
• A stopwatch and a digital anemometer/thermometer for quick yet precise measurements of the flow, temperature, and time
The Exit Sign Smoke Test, also known as the Smoke Density Test, is used to measure how much smoke plastics produce under controlled conditions of combustion or decomposition.
FLAMMABILITY TESTING: WHAT IS IT?
Testing for flammability involves a variety of testing procedures and techniques used to assess a material's susceptibility to ignition sources, tendency to combust, and rate of burning when ignited.
. A safety blow-out panel that is easily replaceable makes it possible to operate the test method safely. Gas measurement ports are provided for optional measurements of toxic gases. A cabinet with a standard 19′′ rack is designed to make it easy to add gas analyzers, chart recorders and other control units.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
KDM Global : Manufacturer Of Fire & Flammability Testing Apparatus
The effective heat of combustion is constant for a particular material when burned at a certain heat flux under constant ventilation circumstances, despite the fact that combustion typically does not progress to complete oxidation. The effective heat of combustion is measured using devices like the cone calorimeter and the OSU.
The goal of the Fire Resistance test is to simulate actual fire circumstances in order to assess the cable's ability to maintain proper operation throughout the fire that directly affects it for the duration required for firefighter intervention. Even if the insulation is compromised, the cable must still function within the parameters established by the standards. Depending on the reference standard IEC, BS, or EN, various test kinds are anticipated. the addition of extra external stresses like water jets, sprinklers, mechanical shocks, and water spray.
Test chamber with a full-width opening door that makes it simple to load samples and clean the chamber.
• For easy use, controls are positioned next to the chamber. • Smoke density and temperature are shown on digital screens for easier use and more precision; they are not blocked when the door is open.
• General requirements:
• Dimensions (m): 1.90 (H), 1.63 (L), and 0.66 (D).
Supply of power: 16A at 110/230 V, 50/60 Hz
Actual chamber dimensions are 914 mm by 914 mm by 610 mm, and the specimen holder can accommodate specimens up to and including 60 mm thick.
• A fully adjustable specimen support structure that enables the specimen holder's lateral movement, allowing the flame to be applied either at the specimen's centre or at laterally separated places.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire Testing Equipment : Cone Calorimeter & Bomb Calorimeter Supplier
According to tests, utilising a Peltier cooling device alone causes base line oxygen drift beyond the limits of the standard, which leads to an inaccurate measurement of heat release.
The complete test apparatus essentially consists of three main parts: a radiant panel support framework, a specimen support framework, which are linked together to bring the test specimen into the necessary configuration in relation to the radiant panel, and a flux metre and specimen holder.
According to ASTM D2843-10, the KDM GLOBAL Exit Sign Test is intended for the measurement and observation of the smoke-producing qualities of plastics under controlled conditions of burning or decomposition, but it cannot be used to measure any other aspects of plastic combustion.
What connection exists between the emission of heat and the loss of mass?
The amount of heat emitted when a unit quantity of a fuel is totally oxidised is known as the heat of combustion. These are measured with an oxygen bomb calorimeter, and they are thoroughly described in manuals. The heat emitted might be calculated by simply weighing the sample as it burns and multiplying the mass if all fires involved complete oxidation.
• A bigger Cone fire model that is optionally available for testing specimens with very low heat release rates. 150mm 150mm specimens are heated evenly across their full surface.
• A fully integrated, optional FTIR gas analysis system with heated probes, heated lines, and a PLC controller is available.
• The radiant burner system has safety interlocks, spark ignition, and full automation.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire Testing Equipment : Cone Calorimeter & Bomb Calorimeter Supplier
According to tests, utilising a Peltier cooling device alone causes base line oxygen drift beyond the limits of the standard, which leads to an inaccurate measurement of heat release.
The complete test apparatus essentially consists of three main parts: a radiant panel support framework, a specimen support framework, which are linked together to bring the test specimen into the necessary configuration in relation to the radiant panel, and a flux metre and specimen holder.
According to ASTM D2843-10, the KDM GLOBAL Exit Sign Test is intended for the measurement and observation of the smoke-producing qualities of plastics under controlled conditions of burning or decomposition, but it cannot be used to measure any other aspects of plastic combustion.
What connection exists between the emission of heat and the loss of mass?
The amount of heat emitted when a unit quantity of a fuel is totally oxidised is known as the heat of combustion. These are measured with an oxygen bomb calorimeter, and they are thoroughly described in manuals. The heat emitted might be calculated by simply weighing the sample as it burns and multiplying the mass if all fires involved complete oxidation.
• A bigger Cone fire model that is optionally available for testing specimens with very low heat release rates. 150mm 150mm specimens are heated evenly across their full surface.
• A fully integrated, optional FTIR gas analysis system with heated probes, heated lines, and a PLC controller is available.
• The radiant burner system has safety interlocks, spark ignition, and full automation.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire & Flammability Test Equipments
The Tewarson Apparatus, also known as the FM Global Fire Propagation Apparatus is a heat release calorimeter that is manufactured by KDM GLOBAL under close collaboration with KDM Global. This is the device created in the 1980s that KDM Global now uses frequently for a range of insurance industry standards, including clean room and cable applications.
In order to create ever-more effective cables that can be sold on a global scale, our clients and partners have submitted to us the requirement to test the single cable's resistance to flame propagation in accordance with the tests required by the various standards.
Electric cable manufacturers use fire test equipment to ensure that their products adhere to relevant standards, including the new CPR regulation (Costruction Products Regulation) that went into effect for all EU member states on July 1, 2013. This regulation applies to all products made to be installed permanently in homes, hospitals, schools, subways, industrial, and civil buildings.
To lower the number of fatalities and injuries brought on by fires, the US, the European Union (EU), and other nations have passed legislation defining minimum flammability standards for a variety of materials and completed goods.
The following components are included with the unit:
• Conical heater rated at 230V for heat flux up to 100kW/m2
• Load cell with sample capacity up to 500g
• Horizontal specimen mounting for samples up to 50mm thick
• Heater Shutter, to allow easy loading of samples or chamber equilibration if enclosure option is used .
• Heat flux metre and housing to fix position of the metre accurately 25mm below base of cone .
• Operating Guide: Provided
• Additional service needs: Bottled O2/N2, Propane
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Flammability Testing Chambers Manufacturers, Suppliers & Exporters
The Chamber, which has a volume of 0.7 cubic metres, is made of fire retardant grade polypropylene with welded seams and a steel framework for robustness.
The following parameters can be calculated using the KDM GLOBAL FPA: Critical heat flux, Thermal Response Parameter (TRP), Effective Heat of Combustion, Chemical and Convective Heat Release Rates, and Fire Propagation Index (FPI).
Single-cable approval based on response or fire resistance requires tests under particular circumstances in accordance with IEC, UL, ASTM, and ISO standards.
Before being put on the market, consumer goods must pass strict safety standards, including limits for heat, smoke, and burning rate. Our specialists are committed to offering you a comprehensive and precise flammability test programme that lowers risk for your company.
Offer, among other things, burners made in accordance with ISO 9705 Annex A1 and A2 that come with a gas train. The gas flow is managed using a mass flow controller with a digital display. The gas controls have an automatic igniting device with a number of safety features.
• ConeCalc Software's automated, semi-automatic, or manual calibration
The Sartorius cell has a load resolution of 0.01g and a maximum load capacity of 8.2kg.
To reduce any vibration from the exhaust fan, the load cell is positioned on a separate table.
• Fire model protection alarm system • Online assistance and remote instrument control provided by KDM Global for systems connected to the internet
Specification:
• +/- 0.1% on the digital oxygen concentration readout
• Column size (mm): 75 & 95 (dia) 450 (H) • Dimensions (mm): 350 (W) 370 (D) x 280 (H)
14 kg; 230 V at 50 Hz, 1 A; or 110 V at 60 Hz
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Flammability Test Apparatus Manufacturers, Suppliers & Exporters
The duct insert includes smoke measurement tools (laser or white light) as well as probes for measuring air velocity and sampling gases. This equipment can be used to instrument the majority of dynamic fire testing devices so that the heat and smoke produced by the materials burned in them can be measured.
The fire model and glass protection screen of the iCone have undergone additional modification. Because it is the most sophisticated model in the lineup, this upgrade version is now known as the iCone2+. The iCone series automates calorimetry to a new degree and makes it affordable for a range of budgets.
KDM GLOBAL's iCone mini and iCone classic include the following distinctive features: Remote cone assembly positioning control, allowing heater and specimen surface separation to be adjusted before and during testing;
Controllable exposure to heat flux. Programmable heat flux ramping or holding for up to 10 consecutive times Motorised positioning and control of the spark igniter to ignite the combustion gases from the specimen; Motorised heat shield to protect specimen from heat exposure prior to test
The KDM GLOBAL Ignitability Apparatus's key characteristics are:
A highly adjustable burner assembly mounted on runners that allows the little premixed flame to be given to the specimen in a fluid motion while inclined at a 45° angle.
By passing a light beam through the smoke produced by the test sample and into a light-measuring receiver, measurements are made. The results are expressed as a percentage of light absorption.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire Testing Technology & Fire Testing Instruments By KDM Global
This equipment can be used with the Dual Cone Calorimeter because its specifications are the same for both big and small size calorimeters. The console is tastefully placed next to the Cone Calorimeter device when it is being used.
The iCone compact, which has a separate gas analysis rack, and the iCone classic, which has a fixed gas analysis console installed on the instrument main frame, are the final two semi-automatic variants in the iCone series. These have, respectively, taken the position of the KDM GLOBAL Dual Cone and Standard Cone.
The temperature controller, motorised heat shield, spark ignition, specimen holders, specimen spacers, heat-resistant glass protective screen, load cell, gas sampling, and combustion make up a whole system on the iCone mini and iCone classic.
Heat Flux Metre, Calibration Burner, Exhaust System, Smoke Obscuration Measurement, and Data Acquisition
Software:
This frequently used test device evaluates the specific optical density of smoke produced by substances when an almost flat specimen, up to 25 mm thick, is exposed vertically to a radiant heat source of 25 kW/m2, in a closed chamber, with or without the use of a pilot flame.The KDM GLOBAL Ignitability Apparatus is provided as a full, user-friendly system with safety measures.
To enhance working life, the combustion chamber is constructed of corrosion-resistant stainless steel. For ease of access, it has big front and side doors. These have toughened glass glazing so that the specimen may be seen in its entirety during the test.
Testing for flammability determines how quickly a material or completed product may burn.
In addition to posing a serious risk to public safety, noncompliance with market access regulations can result in regulatory agencies taking enforcement action.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire & Flammability Test Equipments Manufacturers, Suppliers & Exporters
Objectives and Mission
Acquired the Stanton Redcroft brand-named fire instrumentation division of the company. By 2013, more than 40 distinct fire test instruments were being produced by KDM GLOBAL, which was also regarded as the world's leading provider of calorimeters, NBS smoke chambers, and oxygen indices.
In the latter situations, provide a duct section and a gas analysis instrumentation console. All the equipment required to measure heat release rates and other related metrics is housed in the console. Included in this is an analyzer designed especially for calorimeters that incorporates an improved Servomex analyzer with a high stability temperature-controlled paramagnetic oxygen sensor (and optional CO2/CO) as well as flow control and by-pass for quick response.
Free software is included with the calorimetry apparatus. Free software updates are offered.
the methodology for combustion is in compliance with Standards (ASTM D5485; ISO 11907-4)
Built in compliance with "ISO 11925-2: Reaction to fire tests for building products - Part 2: Ignitability when subjected to direct impingement of flame," the Single Flame Source Test. The device is based on the German Kleinbrenner method for testing the ignitability of building materials when oriented vertically and impinged directly by a tiny flame with no impressed illumination.
As a strategy to achieve new objectives of improvement and cost savings on already consolidated products as well as for new types of testing, many companies have recently adopted these test equipment in accordance with international standards both to test their product and thereby ensure the requirements required to sell in specific sectors.
Products were available with the whole range of tools needed to carry out the fire testing procedures required by the European Construction Products Regulation.
Options:
• Optional NDIR gas analyzers are available for carbon monoxide and dioxide analysis.
• Heated supply lines and a gas analyzer for hydrogen chloride
• Controlled Atmosphere Attachment for the examination of low oxygen sample
• FTIR Toxicity Test Device
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
KDM Global Fire Testing Equipments, Cone Calorimeter Supplier In India
first-generation cone calorimeter was unveiled. Compared to what was currently available in the market, this cone calorimeter was a cost-effective choice. This inclusion expanded the market and made the technology available to more researchers.
A common tool used in fire research to gauge heat release rate, time to ignition, and other important factors when evaluating a material's fire resistance. build the Room Corner Test and provide it with the necessary instrumentation package, or provide clients who want to improve their current facilities or develop their own apparatus with instrumentation.
To ensure that all moisture is taken out of the sample gas, all KDM GLOBAL calorimeters use a Peltier cooling device and drying agent.As it relates to the evacuation of people and accessibility for firefighting, measuring smoke density is a crucial component in evaluating how well cables burn.
Perhaps the most affordable and accurate quality control test for flammable materials is the oxygen index. This method has been defined by numerous military and transport groups and has become a main characterising and quality control tool for the plastic and electric cable industries due to its simplicity of use and high levels of precision. The method determines the very minimal amount of oxygen in the test atmosphere needed to just barely maintain combustion. The manufacturer of the FM Global Fire Propagation Apparatus (FPA), a heat release calorimeter (often known as the Tewarson Apparatus), has been working closely with FM Global to create the apparatus. It should be noted that BS ISO 4589 supersedes BS 2782 Part 141.
This is the device created in the 1980s that FM Global now uses frequently for a range of insurance industry standards, including clean room and cable applications.
For wall and roofing products as well as floor coverings, different performance classes (A to F) can be developed thanks to the Euro categorization construction products legislation. Good results in the SBI apparatus for roofing and wall lining materials or in the Flooring Radiant Panel test for flooring products lead to higher categories. Both of these devices are produced by KDM GLOBAL.
The effective heat of combustion and mass loss rate are then used to calculate heat release. The heat release rates can be calculated after the effective temperatures of combustion for a material under various situations are known.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Fire Testing Equipment Supplier /Manufacturer By KDM Global
The mission of Vision Fire Testing Technology is to offer the finest solutions to reduce fire-related loss for our clients.
Mission
The goal of Fire Testing Technology is to provide a reputable service that is committed to constant product development, implementing cutting-edge solutions, and producing excellent products.
The facility outside of campus has all of the necessary tools for evaluating how well materials and tiny objects withstand fire. To read a detailed explanation of each product provided by the manufacturer, fire testing technology, please click on the links below.
The most prominent bench scale instrumentation in the field of fire testing is cone calorimetry (ISO 5660; ASTM E1354).
The first of KDM Global's new interactive line of calorimeters, the Cone Calorimeter, was released in 2016. The first of KDM GLOBAL's new interactive line of calorimeters, the i-series, was the Cone Calorimeter. It is the most modern, dependable, and user-friendly cone calliper in the world thanks to its cutting-edge automation and control technologies. In 2013, the Cone was introduced.
For determining the amount of smoke produced by solid materials and assemblies set in the vertical position within a closed chamber, the smoke density chamber has been in existence for a long time and is widely utilised in all industrial sectors.
The KDM GLOBAL unit is small enough to fit effectively inside a typical fume cabinet (or behind a straightforward ventilation hood that we can also provide, if necessary). The device provides an ongoing digital reading of oxygen levels in To enable quick setting of the test concentration, the device provides a continuous digital readout of the oxygen concentrations in the test atmosphere. The digital readout can be used to read stabilised oxygen percentages; further flow adjustments are not necessary. Compared to systems that employ analogue gauges or call for flow matching and the calculation of oxygen concentrations using graphs or tables, this is a significant advance. The device is now as automated as it can be.
The whole set of settings is shown. The adaptable data logger comes with software that enables data recorded in the logger to be downloaded to a PC for additional analysis. It can also be utilised in other applications.
An significant factor in assessing how well cables burn is the assessment of smoke density.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
0 notes
Text
Air Quality Equipments and Monitors Manufacturer India
Equipment for Monitoring the Environment
The release of six pollutants—particulate matter, sulphur dioxide, carbon monoxide, nitrogen dioxide, ozone, and lead—is frequently seen with ambient air monitoring equipment. State and federal field specialists can ensure compliance with ambient air quality regulations, which were developed to monitor the aforementioned contaminants that are thought to be damaging to human health and the environment, thanks to ambient air monitoring equipment.
KDM GLOBAL was founded with the intention of providing a wide range of laboratory equipment. We are committed to providing high-quality items. Test chambers, laboratory equipment, sterilisers, clean room equipment, laboratory water solutions, and measuring metres are just a few of the many items we offer for laboratories. We guarantee precision and reliability for critical experiments.
One of the largest companies in the world is Extech. One of the biggest producers and providers of innovative, high-quality portable test, measurement, and inspection instruments worldwide is Extech. Extech is sold in more than 100 countries worldwide, and its success is backed by a vast network of devoted and competent distributors that daily introduce Extech to new customers.
Almost every end market, including automotive, broadband communications, commercial aerospace, industrial, information technology and data communications, military, mobile devices, and mobile networks, is made possible by the company's technologies.
Real-time airborne level monitoring is frequently essential, particularly before and during work operations. Direct-reading tools are helpful for conducting screening surveys to identify regions that call for further analysis. Beta Mass Attenuation (BAM) Samplers are among the many ambient particle detectors and samplers that we provide.
We have developed strong working connections with academia, industry, and our 200+ distributors globally over many years.
Numerous sectors, including those producing cement, steel, sulphuric acid, fertilizer, refineries, pharmaceuticals, and chemical plants, are in great demand for the goods and services we offer. We deal in goods under the following brand names, including Opsis and Xylem.
Being a customer-focused company, our main goal is to provide defect-free variety in order to achieve 100% client satisfaction. Our company has achieved the pinnacle of success and amassed a sizable clientele all around the country thanks to our simple payment options and moral business practises.
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
Flickr : https://www.flickr.com/people/197865063@N04/
Reddit : https://www.reddit.com/user/kdmglobaltesting
Quora : https://www.quora.com/profile/KDM-Global-1
More from Kdmglobals
0 notes
Text
Indoor/Outdoor Air Quality Monitoring Instrument Supplier
At KDM GLOBAL, we never stop working to offer our valued customers a variety of highly capable items that ensure their utmost happiness. In order to better understand the needs of the clients, we have employed our team of professionals, and it is worked out through close coordination with them. In addition to offering our clients the regular versions, we also offer them products that have been specially created to meet their specific requirements. We make sure the competitively priced shipments arrive at their destinations within the specified window of time.
Our quality management team is in charge of examining the manufacturing processes in order to provide items of the highest calibre. They guarantee that the products are made from the highest-quality materials, that quality control procedures are followed, and that the prices are reasonable.
We are a global organisation committed to using technology to improve environmental monitoring, machine operation, and community protection. Most importantly, we are passionate about assisting individuals, organizations, and the government in making wiser decisions on the use of resources, navigating potential opportunities, and conducting business.
Prenatal exposure has been related to developmental delays, behavioural and psychological issues, attention deficit hyperactivity disorder (ADHD), anxiety, and cardiovascular and respiratory disorders. The concentration of ambient particulate matter is sampled, measured, and recorded by ambient particulate monitors. (TSP, PM10, PM2.5, or PM10-2.5). Our ambient particle samplers collect ambient particulate matter and deposit it onto filters that have already been weighed in preparation for a subsequent laboratory gravimetric or speciation study. (TSP, PM10, PM2.5, or PM10-2.5).
Our 900+ workers, who are spread throughout 27 offices, 6 production facilities, and 4 R&D centres in 11 countries, are based in Limonest, France, and work to provide dependable, comprehensive data solutions for clients all over the world.
Our personnel can easily comprehend the precise needs of clients because to their extensive industry expertise and deep domain knowledge. Our workforce is kept up to date on all of the latest technological developments in the business through a variety of training sessions and educational programmes that are regularly organised. Customer Contentment
For more details contact us:
· Website: https://kdmglobal.business.site
· Email : [email protected]
· Website : https://sites.google.com/view/kdmglobal/home
· Contact :8218470498
Follow Us On :
Facebook : https://www.facebook.com/testingequipmentkdm
Twitter : https://twitter.com/global_kdm
LinkedIn : https://www.linkedin.com/company/91037160/admin/
YouTube : https://www.youtube.com/channel/UCXSi4eywyPih3FPziTIT5Jg
Pinterest : https://in.pinterest.com/kdmglobaltesting/
Instagram : https://www.instagram.com/kdmglobalsales/
Tumblr : https://www.tumblr.com/blog/kdmglobal
Flickr : https://www.flickr.com/people/197865063@N04/
Reddit : https://www.reddit.com/user/kdmglobaltesting
Quora : https://www.quora.com/profile/KDM-Global-1
More from Kdmglobals
0 notes