kuajingplus - Tumblr blog

[kuajingplus]

How does the laboratory emulsifying mixer carry out the pilot scale-up?

The intermediate experimental stage is to further study the changing rules of the process technology in a specific scale device. It will involve problems that cannot be found and solved in the small test stage. The optimal process conditions for each step in the process technology may change with external conditions such as experimental scale and equipment, so the importance of this stage is beyond doubt.

The scale-up of the pilot test is not just as simple as the expansion of the scale. The tasks to be completed in the two periods are different. The main mission of the small test stage is exploration and development, focusing on the analysis of the materials involved, as well as the process of reaction and separation. The problem to be considered in the pilot test stage is how to maintain the balance of matter, heat, and momentum while scaling up, so as to provide stable process means and reliable data basis for the realization of industrial significance and economic scale production.

The method of pilot scale-up of the laboratory emulsifying mixer is as follows:

1. Experience amplification method

Exploring the characteristics of the reactor through step-by-step scale-up based on experience, from laboratory equipment to intermediate equipment to medium-sized equipment and finally to large-scale equipment, is the most important method for the scale-up research of API processes.

The premise of empirical scale-up is that the reactor must be maintained at exactly the same operating conditions as the unit for which the data are provided. Because the premise is difficult to achieve, the magnification is small, and the reactor design cannot be optimized by changing the reactor structure or reaction conditions.

2. Similar amplification method

Amplify using similarity theory. This method is more suitable for the scale-up of physical processes (stirrers and heat transfer devices).

Disadvantage: There is no guarantee that geometry, fluid flow, and heat and mass transfer will all be similar.

3. Mathematical Analog Amplification

The application of computer technology is the main development direction of the pilot scale-up in the future.

Advantages: low cost, short time, high accuracy.

Disadvantages: Because the drug synthesis process is too complicated, building relatively complete physical and digital models is impossible.

4. Micro intermediate device

In recent years, micro-intermediate devices have developed rapidly, and micro-intermediate devices are used to replace large-scale intermediate devices to provide accurate design data for industrialized devices. Its advantages are low cost and fast construction speed.

In recent years, micro-intermediate devices have developed rapidly, and micro-intermediate devices are used to replace large-scale intermediate devices to provide accurate design data for industrialized devices. Its advantages are low cost and fast construction speed.

In general, higher magnification ratios will be used for laboratory-to-pilot production, and lower magnification ratios will be used for pilot-to-industrial production. In this way, the success rate of process amplification can be improved, and potential risks and losses can be reduced.

As a professional emulsifying machine manufacturer, YeKeey laboratory homogeneous emulsifier equipment is widely used in food, pharmacy, cosmetics, chemical industry, university teaching, various research institutes, and technology research institutes. As a partner who can quickly respond to market changes, YeKeey can provide customers with full support from the first product concept to industrialization, helping customers put their ideas into practice. YeKeey’s 100,000-level purification laboratory is a space to try new ideas.

Here, customers can test experience machines in a laboratory equipped with professional equipment, while customers also receive expert advice and support on technical equipment. Contact us to learn more!

[kuajingplus]

5 ideas for elevating the style and functionality of an ottoman

Ottomans have proven to be a stylish and flexible addition to any home. Its dual functionality allows for a perfect coffee table, footrest, or seating arrangement. Many ottomans are available with a storage facility to house all the clutter behind its stylish design. However, each house has different needs and preferences. We have rounded up a few ottomans to give the perfect upgrade to any home. From space-saving storage ottomans to stylish and plush ottomans, the following are some great ideas to improve the style and functionality of a home with an ottoman.

Optimize storage needs with an ottoman bench:

Small knick-knacks lying around the home actually have the biggest share in making your home feel cluttered. Hidden storage can truly come in handy in organizing and keeping essentials within easy reach. The most convenient and affordable option for any home remains an ottoman storage bench. Specially designed to save your space, Housetex Teddy Fleece Oval Ottoman Bench Set can offer a comfortable seat with storage underneath.

In addition, Housetex Ottoman Bench with drawers can become a perfect place to store your remote, game controllers, small electronics, toys, magazines, and other knick-knacks. It can play a major role in making a bedroom or living space more organized and functional. Ottoman bench with drawers can also be a handy addition to compact home offices where your office essentials and files can efficiently be stored and organized.

Embrace a space-saving solution with foldable storage ottoman:

Today space remains of prime importance in any home. A perfect space-saving solution for any household remains a foldable storage ottoman. Besides featuring a handy surface for seating and serving, a storage ottoman offers adequate storage underneath. These ottomans are generally lightweight and portable and can easily be carried from one place to another. Yet the most convenient feature is that these ottomans can easily be folded when not in use.

A storage ottoman comes in handy in storing items such as throw pillows and toys to lend a clutter-free space. Available in a variety of designs, a foldable storage ottoman can be the perfect complement to a child’s room. Check out this Housetex Foldable Star Shaped Storage Ottoman, it can become a comfortable seat or a convenient spot to dump toys. When not being used, it can be folded and tucked away underneath the bed.

Create a perfect space for entertaining with a pair of ottomans:

A pair of ottomans can offer ultimate flexibility to your living space. It can transform the area into the perfect spot for entertaining and chilling with friends and family. Serving as a footrest, the ottoman can offer a cozy and laid-back space to enjoy movie nights. A stylish ottoman can also double up as a coffee table. Accompanied by a tray the surface can come in handy in serving foods and drinks to your guest.

While entertaining a major problem remains to provide adequate seating for guests. In this case, Housetex Teddy Fleece Ottoman Bench Set with a pair of ottoman cubes can easily offer extra seats for guests. This lightweight ottoman set can easily be carried anywhere to follow a conversation. Lastly, the ottoman is a great space to display your beloved decor items. You can create an eye-catching vignette upon the ottoman using a stylish tray. There is no doubt that a simple pair of ottomans can offer dual functionality and style to spend quality time with friends and family.

Open up the space with a modern ottoman with slender metallic or wooden legs:

It is no doubt that a cramped and cluttered space can deteriorate functionality and lead to stress. For this reason, many people opt for an open and minimal design where one can relax and unwind. A great way to open up a small living space is to opt for a modern ottoman that is elevated upon slender legs. See this Housetex Teddy Fleece Storage Ottoman with Wood Legs. It can double up as a coffee table to lend a light and airy aura to the space.

A minimal and stylish ottoman can be complemented with wooden legs to add a dose of warmth and character to a room. On the other hand, an ottoman with metallic legs remains ultra-sleek. Its slender legs can open up a space with a touch of luxury. A modern ottoman remains the ultimate way to increase functionality and lend an airy and stylish flair to your home.

Make the space cozy and inviting with the rich textures of an ottoman:

An ottoman remains a stylish and versatile addition that can make a home feel cozy and inviting. An upholstered ottoman softens any room with its rich and comfy textures. You can opt for a leather ottoman to add a supple and luxurious feel to a room. Leather also remains a durable material where your multiple-purpose ottomans can stand the test of time. A leather ottoman can be the perfect way to add rich texture and luxe style to your home.

Other great options for an ottoman are Teddy fleece and velvet. The plush texture of these materials makes any space more inviting. A Teddy fleece ottoman can make a powerful design statement to amp up the style of your home. On the other hand, a linen ottoman remains perfect for daily use, lending soft and comfy textures. See Housetex Teddy Fleece Ottoman Stools, play around with the materials of an ottoman to invite rich textures to your home.

Add a vibrant pop of color with a stylish ottoman:

An ottoman can serve as a stylish design feature for any room. It can complement the existing color scheme to harmonize with the theme of the space. An ottoman can also be used as a tool to introduce contrast in the room. It is a great way to add a pop of color to a space without going overboard. See this Folding Velvet Star Shaped Ottoman Stool with Storage, apparently, it is always a good idea to use an ottoman adorned in bright colors such as emerald green, fuchsia pink, or vibrant yellow to make an outstanding style statement.

Another great option to uplift the style of a home is to introduce an ottoman with rich patterns. It can add a dose of visual interest, making the space more inviting and stylish. Opt for sleek geometric patterns to enliven a modern or contemporary home. On the other hand, an ottoman with animal prints can make a chic statement. Play around with the color, textures, and patterns of an ottoman to create the look you always wanted.

Ottomans serve as a flexible and multipurpose addition that can easily elevate the functionality and style of your home. With a large variety available, one can easily find an ottoman that best suits his needs. For organizing small knick-knacks opt for an ottoman bench with drawers. An ultimate space-saving solution remains foldable ottoman storage that can easily be tucked away when not needed. If someone loves entertaining a great idea remains a pair of ottomans. It can become a comfortable footrest, an extra seat, or a handy surface to serve your guest.

Ottomans are also a great way to improve the aesthetics and style of a space. Ottomans elevated upon slender metallic or wooden legs are perfect for lending minimal aesthetics to a space. It can also be used as a design element to introduce rich colors, patterns, and textures to make the perfect style statement. We at Housetex manufacture a wide range of top-notch and high-quality ottomans. With a variety of materials and designs, our ottomans can save space, offer multiple functionalities, and amp up the style of any home.

Housetex is one of the leading suppliers of ottoman and upholstery furniture. We have in place an extensive catalog of materials, colors, and designs to find the perfect match for household ottoman products and other lifestyle accessories. Housetex offers OEM/ODM services to our clients around the globe. We can do customization as per your specifications and requirements. Our annual manufacturing capacity exceeds 2000*40HQ. Check our various ottoman and upholstery furniture designs for favorable wholesale prices, please feel free to contact us at info@housetexchina.com.

[kuajingplus]

HOW IS HAND SANITIZER GEL PRODUCED? WHAT EQUIPMENT IS USED TO PRODUCE IT?

The main component of the disposable hand sanitizer gel is alcohol. Alcohol molecules have a strong penetrating ability, can penetrate the bacterial membrane into the bacteria, change the protein molecular structure of the bacteria, and denature and solidify the bacteria, so as to achieve the purpose of sterilization.

75% alcohol can be used for skin disinfection, but frequent use of alcohol solution will cause damage to the skin, while the hand sanitizer gel will add water-retaining ingredients and neutralize the pH value to make it close to the skin, so disposable hand sanitizer gel is not only widely used in medical places, but also very suitable for daily use.

The production process of hand sanitizer gel

The production process of hand sanitizer gel is relatively simple, and there will be certain differences according to different formulas. Here is an example of a preparation method.

1. Slowly disperse the thickener powder on the surface of the deionized water, and soak for 40-60 hours until completely dissolved.

2. Dissolve dichlorophenoxychlorophene with ethanol to make dichlorophenoxychlorophene ethanol solution.

3. Mix ethanol, n-propanol, and dichlorophenoxychlorophenol ethanol solution in a stainless steel mixing tank, mixing evenly, then add the thickener solution prepared in step 1, then add deionized water, and mix evenly.

4. Add a neutralizer to adjust the pH value to 5-7, and then disposable hand sanitizer gel can be prepared.

So what kind of production equipment can produce disposable hand sanitizer gel? It is necessary not only to ensure the mixing effect but also to pay attention to whether it is easy to clean and disinfect and whether it is convenient for later maintenance when selecting disposable hand sanitizer gel production equipment. The SP series bottom homogeneous external circulation emulsifying mixer produced by the emulsifying mixer manufacturer YeKeey Automation can meet the needs of customers in the production of disposable hand sanitizer gel. The SP homogeneous circulating emulsifying mixer is divided into two categories SPA and SPC. SPC is a stand-alone equipment for lifting, and SPA is more suitable for engineering installation.

Features of SP series bottom homogeneous external circulation emulsifying mixer

1. The homogenizer is installed at the bottom of the emulsifying pot, and the materials in the kettle can be homogenized and emulsified repeatedly through the external circulation pipeline to achieve a sufficient and uniform mixing effect, especially suitable for the production of disposable hand sanitizer gel. 2. The inside of the tank is mirror-polished for easy cleaning, and a CIP cleaning system is optional. 3. It can be equipped with heating, cooling, vacuum, and other devices. 4. The stirring tank body and stirring tank cover can be opened according to the process requirements for feeding, discharging, observation, temperature measurement, pressure measurement, steam fractionation, safety venting, and other process pipe holes. 5. SUS316L stainless steel material is optional, and various operation modes are optional. The structure inside the tank is easy to clean and maintain, and a CIP cleaning system is optional. 6. The equipment structure is simple, reliable, and cost-effective

If you have more questions about the disposable hand sanitizer gel production equipment, welcome to contact YeKeey!

[kuajingplus]

Top 4 upholstery fabrics for an ottoman

Upholstery fabric plays a major role in defining the look, feel, and functionality of an ottoman. Besides focusing on the color and patterns of the fabric, it is equally important to consider its durability. This remains a crucial factor for an ottoman as it stands out as one of the most versatile pieces of furniture for any home.

From serving as a footstool to a handy seat or surface, an ottoman is easily prone to daily wear and tear. It is important to choose an upholstery fabric that can withstand its daily usage. We will be putting a glance at the look, comfort, and durability of some of the most popular upholstery fabrics.

We at Wuxi Housetex, manufacture ottomans in a wide range of materials to deliver the perfect option for each household. We craft with quality and comfort in mind to deliver the best premium quality ottomans. Following are the top four upholstery fabrics for an ottoman that can maintain the style and comfort of your home for years to come.

Velvet:

Velvet stands as one of the classic and popular upholstery fabrics due to its look and feel. The soft and sumptuous texture of velvet makes it a plush and inviting addition. Velvet ottomans can be the perfect way to lend a warm feel to a room. It always remains one of the most versatile materials. From traditional to modern and contemporary spaces, velvet upholstery can make a stunning statement in any setting.

The little disadvantage of velvet is that it will, in some circumstances, wear out quickly under heavy use. The material might not be suitable for a busy household, since it takes efforts to remove stains from velvet. The material might also accumulate dust, requiring careful attendance to maintain the soft texture and beautiful color of the upholstery. Velvet works best for bedroom and living spaces where there is less usage. The material is perfect for bringing an elegant and sophisticated appeal to a house.

Check out Housetex Unique Velvet Storage Ottoman Series. For this season, we present you a lovely Pinkish Heart Shaped Velvet Ottoman with Storage.

Linen:

Linen stands as one of the most durable and easy-to-care upholstery fabrics. Made from the fibers of flax plants, linen remains a breathable and airy fabric. It is both soft and smooth to touch to vouch for an elegant look, well-suited to both your formal or casual living spaces. While linen may be prone to stains, it can easily be washed or spot cleaned to become an easy-to-care upholstery fabric for an ottoman. Another major problem with linen remains that it can easily wrinkle. In this case, linen fibers are blended with natural or synthetic fibers to reduce its ability to shrink or absorb stains. If an ottoman has to undergo heavy usage, then a linen blend remains a more suitable option.

Stylish in a natural sense, Housetex Linen Ottoman Side Table will make you feel like in a Spring Bamboo Garden. Its upholstery is covered in clean-cut linen fabric and in perfect round shape. While four solid wooden feet complete the look, its round, light wooden top provides you both a smooth surface to hold your favorite coffee mugs and an easy access to the ample storage below, super convenient.

Leather and Faux Leather:

Leather and faux leather have proven to be one of the most durable and long-lasting upholstery fabrics. This type of material has a distinguished feel and look that attains a stylish and sophisticated appeal in any room. Leather and faux leather ottomans can be the perfect way to add a touch of luxury to a living space. The material also remains durable enough to withstand daily wear and tear.

The sturdy texture and water resistance of leather enable the material to deal with stains and spills. A damp cloth can be used to remove the stain or liquid to deliver easy care. A disadvantage of leather or faux leather remains that it may be prone to splits and cracks. It is a good idea to condition leather upholstered ottoman once or twice a year to bring back its former glory. When well-maintained, a leather or faux leather ottoman can bring style and serve you for years to come.

Come and check out this Housetex Square Leather Storage Ottoman Cube, it is surely a perfect addition to your living space.

Polyester:

Polyester is a synthetic fabric that distinguishes itself as a durable and affordable material. One of the prime benefits of polyester remains its high resistance to stains and scratches. Ottomans upholstered in polyester can easily withstand daily wear and tear. The upholstery fabric remains a great option for a household with kids and pets due to its easy maintenance and durability, for instance, Housetex Couch Style Pet Bed series remains one of our most popular series.

Modern-day polyester is also breathable to lend a more cool and comfortable feel. The material can be blended with various natural fibers to deliver a soft and comfortable feel. However, the disadvantage of polyester is the build-up of static charges that might affect a comfortable seating experience. The material also shows weak resistance against heat and oil. Overall, polyester remains an easy-to-care and durable upholstery fabric for any ottoman. It serves as a great option for a household with kids and pets.

Each upholstery fabric has its own pros and cons which may vary according to each household. Focus both on the desired look and comfort, and how to maintain it over the passage of time. The look, comfort, and durability, all remain essential for a high-quality ottoman. To attain a sophisticated and luxurious look, velvet and leather remain the best option. While velvet is more suited to formal spaces, leather presents a more durable option that can be used anywhere.

For a soft, breathable, and versatile fabric, linen remains a perfect choice. However, the material may not be the best option for households with heavy wear and tear.  A great alternative could be polyester which is both durable and affordable. The upholstery fabric of an ottoman remains important for selecting a stylish, comfortable, and long-lasting ottoman.

Housetex is one of the leading suppliers of ottoman and upholstery furniture. We have in place an extensive catalogue of materials, colors, and designs to find the perfect match for household ottoman products and other lifestyle accessories. Housetex offers OEM/ODM services to our clients around the globe. We can do customization as per your specifications and requirements. Our annual manufacturing capacity exceeds 2000*40HQ. Check our various ottoman and upholstery furniture designs for favorable wholesale prices, please feel free to contact us at info@housetexchina.com.

[kuajingplus]

How to choose the right pressure-sensitive adhesive?

Pressure-sensitive adhesive is the adhesive that is sensitive to pressure in the bonding process and can be easily bonded to the surface just by finger pressure. PSA is often used to make labels, tapes, protective films and etc. It has instant bonding and insulation sealing properties. Flame retardant formulations can be added to some adhesives to further enhance customers’ safety requirements. Before we choose, we could have a brief knowledge of the advantages and disadvantages of different types of adhesives and use attention.

Types of pressure-sensitive adhesives

There are various pressure-sensitive adhesives, which can be divided into solvent PSA, water-based PSA, hot melt PSA, and ultraviolet (UV) curing PSA according to their form.

Solvent Pressure sensitive adhesive: solvent PSA has a wide selection of raw materials and rich molecular structure. This type of adhesive has the advantages of good high-temperature resistance, chemical corrosion resistance, and water resistance. It was widely used on power equipment, automobile door seals, washers, baffles, and safety warning labels on filters. However, its solvent is flammable, explosive, and toxic, which has potential hazards to human injury and environmental pollution. In recent years, with increased requirements of the EPA Clean Air Act on volatile organic compounds in the production process, the proportion of solvent-based pressure-sensitive adhesives is decreasing year by year.

Water-based pressure-sensitive adhesive: its main components are deionized water and vinyl acrylic acid monomer. Its glue coating process almost has no waste discharge, so it is suitable for fast-speed coating. Besides, water-based PSA also has excellent anti-aging resistance, good compliance with the base material, and price advantage. However, it solidifies slowly and requires a longer drying time. With the continuous strengthening of global awareness of environmental protection, emulsion pressure-sensitive adhesive has been developed rapidly in recent years.

Hot melt pressure sensitive adhesive (HMPSA): is mainly composed of polymers, resins, and plasticizers. Besides the excellent bonding strength, hot-melt PSAs’ coating speed is fast, it is suitable for a high degree of automation production. It even has good application in cold and humid conditions, but it is not resistant to high temperatures. HMPSA is mainly used in packaging, industrial assembly, bottle body labeling online, and transparent labeling.

UV (UV) curing or visible light pressure sensitive adhesive: it has strength on fast curing speed, low curing temperature, and low energy consumption. Compared with HMPSA, its heat resistance and anti-plasticizer resistance have also been greatly improved. The use of UV curing or visible light PSA has an excellent effect in reducing air pollution and energy saving. However, it is still in the stage of development at present, which is mainly used in the automobile industry and other fields with higher requirements.

Attention in selecting pressure-sensitive adhesives

After knowing the excellent properties of all kinds of PSAs, it is also necessary to consider the glue infiltration level, final application, removal possibility, and surface structure of base material when choosing to pressure sensitive adhesives.

Level of Bleed-Through: some PSA may migrate into the base material when in use, which would lead to product polluted appearance as well as product performance issues. PSAs have differences in bleed-through level when combined with the base material. Ensure the chosen PSA is compatible with the base material and add the undercoat to improve the bonding adaptability of the adhesive and the surface material if necessary.

Final Application: fully understand the final application details of the product, especially the application environment. For example, if the final product is used outdoors, it requirement for higher anti-aging resistance; if it is used in hot areas, it will need better high-temperature resistance.

Removal possibility: some customers ask for temporary protection. For example, the protective films for doors and windows would need to be removed several months later after installation. While Some need permanent protection, like mirror safety film. It should be noted that not all pressure-sensitive adhesives are removable. So it is necessary to know it in advance.

Surface Texture of base material: the surface roughness of the base material will affect the bleed-through level of the adhesive, which determines the bonding strength between the adhesive and the substrate.

Providing suitable adhesive is just the beginning of our service

Wuxi Changsheng has more than 20 years of experience in the manufacture of water-based pressure-sensitive adhesives. Water-based PSA is not an end product, it is often used with different types of coating machines to produce protective products for different uses. According to our previous experience, we find that drying temperature, drying air volume, oven length of coating machine, curing agent dosage, and coating speed will have a direct impact on adhesive performance. Some products even require dust-free workshops to avoid workshop dust affecting the transparency of the coating surface. In addition, different coating methods have different requirements for glue viscosity.

Providing suitable emulsion pressure-sensitive adhesive to customers is not the end of our service, but the beginning. Due to the above-mentioned reasons, customers will meet different situations in the practical use process. This requires us not only to have a clear understanding of the mechanical properties required by the customer’s products but also to have a knowledge of their coating machine.  Then we could help to solve all kinds of problems that may arise in the process of use.

[kuajingplus]

What Products can the Vacuum Homogeneous Emulsifier Produce?

The vacuum homogeneous emulsifier is a kind of cosmetic equipment, but due to the development of science, the production technology has been continuously innovated. The vacuum homogeneous emulsifier is not only used in the cosmetics industry, but also in many industrial production fields. Let’s follow the editor of YeKeey, a professional emulsifying machine manufacturer to see what products can be produced by the vacuum homogeneous emulsifier.

Vacuum Homogeneous Emulsifier  Application

From the scope of application, the emulsifier can be used in a wide range of liquid products. For products with low viscosity, the emulsifier can handle them easily, and you don’t even need to turn on the homogenization function. You only need to mix, and even two-way mixing is sometimes a bit wasteful. To be precise, it is a bit overkill, and the price of the emulsifier is not cheap, and there is no need to use such a piece of good equipment. Ordinary stainless steel mixing tanks can be used for products such as lotion. But for products with a certain viscosity, it can only be produced by a vacuum homogeneous emulsifier.

The emulsifying machine

widely used in producing food sauces

Food sauces, such as salad dressing, mayonnaise, custard sauce, etc. The function of the emulsification tank of vacuum emulsification equipment is to dissolve one or more food materials in another liquid phase and make the combination into a relatively stable emulsion. Therefore, it is widely used in the emulsification and mixing of edible oils, powders, sugars, and other raw and auxiliary materials.

The emulsifier in the chemical industry

In the chemical industry, some ink coatings, paint emulsification, and dispersion also use vacuum emulsification tanks, especially suitable for mixing and emulsifying some insoluble colloidal additives CMC and other raw materials. The emulsifier is ideal for producing cosmetics, medicine, food, chemical dyeing, printing, ink, and other industrial products. It is more effective, especially for the emulsification of materials with high matrix viscosity and relatively high powder content.

High-shear vacuum homogenizing emulsifiers are widely used in the field of cosmetics

In the field of cosmetics, high-shear vacuum homogenizing emulsifiers are widely used in cosmetic creams, shampoos, shower gels, sunscreens, and other cream products. The emulsifier performs high-speed shearing, dispersion, and impact on the material through the high-speed rotation of the homogenizing head connected to the engine. In this way, the material will become more delicate and promote the fusion of oil and water. The material will be mixed with air during the production process, which will cause the product to become air-bubbled, bacterially polluted, easily oxidized and the appearance is not smooth. This situation will not occur when using a vacuum emulsifying machine.

It will disperse and emulsify evenly in a vacuum state, and air bubbles are no longer mixed in the process of production and mixing, so it can ensure the cream is delicate and stable.

Yekeey

YeKeey vacuum homogeneous emulsifier is easy to operate, has stable performance, good homogeneity, and high production efficiency. Moreover, this equipment also has the characteristics of convenient cleaning, reasonable structure, and a high degree of automation. YeKeey can also provide customers with the service of sending materials to the factory for test machines. If you have a demand for a vacuum homogeneous emulsifier, please consult YeKeey.

[kuajingplus]

The Introduction of Changsheng PE Protective Film

We are a skilled PE protection film manufacturer committed to producing various types of protective film. Each blemish or scratch can reduce the product’s value and raise your costs for replacement or repair. We provide temporary surface protection for wood, carpets, aluminum, stainless steel, and more. Learn more about our available products below:

Available PE Protective Films

Medium adhesion PE protective films for aluminum profile

Our medium-adhesion PE protection film offers steady adhesion, simple usage, and no trace. The aluminum surfaces can be shielded efficiently from debris, scratches, and damage during manufacture, warehousing, transit, and assembly. It is more appropriate for designs with somewhat rough surfaces and stronger adhesion needs, like the alumina profile.

PE protective film for aluminum profiles with smooth surfaces

The entire production, shipping, or installation process has several possible risks. Dust and grime may contaminate it, as can sprays and markings, and harsh handling can damage it. You can prevent these issues by using our PE protection film.

PE protective film for rough surface aluminum profiles

The adhesive performance of PE protective film will be superior to that of other material protective films because PE film is a soft material, regardless of whether it is a conventional profile or a special-shaped profile. As a result, our PE protection film for Rough Surface Aluminum Profiles is better suited for a rough surface that needs greater adherence, including Aluminum that has been sprayed or Aluminum that has been brushed.

PE protective film for glass

It will aid in shielding your windows against spray paint, other sundries, and other activities, regardless of whether you use it for building, remodeling, repair, or other reasons! In addition, low-viscosity PE protective film can fulfill the viscosity criteria for glass since it has a smooth finish.

PE protective film for stainless steel

Any wear or damage will lower the value of stainless steel, and customer replacement will cost more money and take longer. To prevent stains, scuffs, or dust, our protective stainless tape may offer temporary protection for stainless plates during bending, stamping, installations, etc., to maintain the quality of stainless steel.

PE protective film for carpet

During construction, restoration, repair, or any other time, our carpet protection film will guard your carpet against dirt, dust, foot traffic, paint splashes, and other hazards. Because of its straightforward directions, this film is simple to apply and can be used by experts and novices. It is also simple to uninstall and leaves no trace behind.

PE protective film for mirror

Its application is entirely distinct from other surface protection films and is made on the rear of the mirror. It is also known as mirror safety backing film. There is no need to remove it after installation because it is firmly attached to the rear of the silver-plated glass mirror. The mirror’s high viscosity and soft substance can aid in collecting the fragmented pieces when it is unintentionally damaged, minimizing the harm to the body.

Conclusion:

Our temporary surface protection film avoids recycled materials and uses only 100% of the original raw materials. In addition, our PE protective films come in different colors, and we can provide stunning logo printing to meet your needs. Contact us for more information regarding our PE films.

[kuajingplus]

What are the precautions for choosing a mayonnaise emulsifying machine?

Some problems are often encountered during the production of mayonnaise. Such as maintaining the pH value to stabilize the mixture throughout the mixing process, how the mayonnaise emulsifying machine disperses and hydrates product properly at low liquid volumes, long hydration mixing time for stabilizers and thickeners, etc. In order to avoid the above problems, the following items should be paid attention to when purchasing the mayonnaise production equipment emulsifier. So in order to avoid the above problems, we must pay attention when purchasing mayonnaise production equipment emulsifiers. What are the precautions? Let’s follow the editor of mayonnaise emulsifying machine manufacturer YeKeey to have a look!

Precautions for purchasing mayonnaise emulsifying machine

Understand the functions and working methods of emulsifying machine equipment. Mayonnaise production equipment is generally produced by emulsifying machines. There are many types of emulsifying machines with different qualities on the market. Therefore, it is necessary to deeply understand the functions and working methods of the emulsifying machine equipment when purchasing an emulsifying machine. Understanding these is to better control the quality of the produced mayonnaise products and whether they can meet the production need

Understand the material and other related conditions of the vacuum emulsifying machine equipment. The material of the emulsifying machine equipment determines the durability and wear resistance of the equipment.

Understand the brand information of emulsifying machine equipment. The brand reflects the historical development of an emulsifying machine manufacturer. It is a comprehensive reflection of quality, service, and word-of-mouth that the brand side has carefully built over the years. through years of thorough in-depth understanding of emulsifying machine brand information, and even personally inspecting emulsifying machine manufacturers, it is possible to more clearly measure and judge whether in-depth cooperation can be carried out.

Emulsifying machines are generally high-value and highly technical equipment, which are closely related to production. Strong technical support and after-sales service from emulsifying machine manufacturers are required in the early stage of installation and commissioning of emulsifying machines, production maintenance, and some technical upgrades. Therefore, It is necessary to choose a manufacturer with a complete service system that can provide timely services when purchasing an emulsifying machine.

Don’t forget product hygiene safety. The safety of the products you produce is always a concern as you work to protect consumers and your brand’s reputation. You can stay focused and minimize risk by choosing an emulsifying machine supplier from:

Provide emulsifying mixer design in compliance with GMP hygienic standards

Uses only food-grade materials (304 or 316L stainless steel) in its equipment

Review the compliance of emulsifying machine parts

Emulsifying machine with efficient built-in cleaning systems (CIP) for all product contact areas.

A vacuum emulsifying machine is a mayonnaise production equipment, which has a great influence on the quality of mayonnaise production. However, manufacturers who have just entered the industry may have certain misunderstandings in the purchase of vacuum-emulsifying machines. Refer to the above points for the suggestions of YeKeey emulsifying machine manufacturer can avoid detours when you purchase the machine equipment. Welcome to consult YeKeey online if you have more questions about the mayonnaise emulsifying machine.

[kuajingplus]

6 Useful Tips to Clean Living Room Storage Ottoman

The storage ottoman remains one of the handiest and also most functional additions to any living room. From working as a multifunctional enhancement to your living room to including as an attractive accent, a storage ottoman can benefit in many ways. As a matter of fact, a storage ottoman is an essential for any type of house that likes to captivate. It can provide an additional area to sit, kick up your feet, as well as serve while concealing all your clutter inside. Being made use of for multiple functions, it is no question that a storage ottoman is conveniently prone to spills, spots, and dust. We have some beneficial ideas to tidy, maintain, as well as freshen up your storage ottoman so that you can take advantage of this convenient furniture.

On a regular basis dust or vacuum a storage ottoman:

Dusting and also vacuuming remain simple ways to maintain as well as promptly tidy an ottoman. Pet dog hairs, dust, as well as debris might conveniently accumulate upon it. Just utilize a towel or a brush to dust all sides of the ottoman. The bottom as well as storage area can also gather a large amount of dust, so make sure you completely cleanse the ottoman from each side. Vacuuming is an additional reliable means to clean and maintain your storage ottoman. A hose pipe attachment can aid to reach all its splits and also crevices. Make certain you vacuum the sides and bottoms to maintain your ottoman looking fantastic. Inspect the guidelines given by the storage ottoman manufacturer: If your ottoman smells negative or has actually experienced any kind of type of discolor or spill, it is clearly time to deep clean it. However, prior to deep cleaning, it is important to check the standards supplied by the ottoman manufacturers. Defining the means your ottoman must be cleaned the guidelines can assist to stay clear of any possible damages to the furniture. Usually, four type of symbols are composed on the tag to specify the method and also cleaning remedy. "W," suggests that a water-based service such as a hair shampoo, upholstery cleaner, or gentle dish soap can be utilized with a steam vacuum. On the other hand, "S," restricts the cleansing service to solvent-based cleaners just. The sign, "W/S," allows for both water-based as well as solvent-based cleaning techniques. Last but not least, the sign, "X," means that the ottoman calls for specialist dry cleaning. Recognizing these signs can allow you to pick the right technique to deep tidy your ottoman.

Deep clean to freshen up your storage ottoman:

When you have actually read the ottoman manufacturer's standards as well as decided upon the cleansing option and also method, it is time to deep tidy. Initially, extensively dust and vacuum cleaner the ottoman. For if you wet any kind of dust or debris it will stick onto the ottoman and might be more difficult to get rid of. It is likewise advisable to spot examination a cleaning service before you apply it to the entire ottoman. Merely apply it to a tiny area and wait to see if it creates any type of damage or discoloration on the ottoman. This is an excellent way to avoid any damages to your handy ottoman. For an ottoman where you can securely use a water-based service, a carpeting hair shampoo, bleach-free detergent, or mild dish soap remains ample. Apply the remedy with a soft towel or sponge and also scrub it gently. Ensure you do not oversaturate the ottoman. It is additionally a fantastic idea to allow the option sit for a couple of mins to chill out the dirt. Gently blot the location where there are stains. This suggests you begin from the outdoors as well as relocate inwards to avoid the tarnish from spreading. For cleaning up the option, utilize a moist cloth. Soak excess water with a completely dry towel and let your ottoman air completely dry. The approach is wonderful for restoring the previous magnificence of your storage ottoman.

Deodorize your storage ottoman with cooking soft drink:

Being conveniently vulnerable to dirt as well as spills, a storage ottoman can collect a bad odor. In this case, you can just deodorize your ottoman with baking soft drink. Acting as a hassle-free choice to detergent, baking soft drink can also achieve similar results. Merely spray baking soft drink onto your ottoman and also allow it sit for regarding a hr. Baking soda will take in the odor and also freshen up your ottoman. Lastly, make use of a vacuum to get rid of the sodium bicarbonate. For comprehensive cleaning, you can additionally mix water as well as develop a cleaning remedy. For cooking soda service can efficiently loosen up dirt and also deep clean your storage ottoman.

Sometimes wax a leather storage ottoman:

A natural leather storage ottoman remains an elegant as well as convenient enhancement to any kind of living-room. While the material brings a dose of refinement to any type of area, it may need added treatment. Besides deep cleaning, a leather ottoman should be waxed occasionally. Waxing at the very least once a year assists to prevent the marks and scratches that normally may appear on the product. Waxing is an excellent method to restore the appeal as well as style of a leather storage ottoman.To use the storage ottoman to the maximum, normal upkeep and cleaning stay a need. Routinely dust as well as vacuum the sides, underside, as well as storage compartment. It can aid to keep the ottoman and also decrease the variety of time you require to deep clean it. Prior to the deep cleansing, always examine the manufacturer's guidelines to specify the technique and also cleansing option that ought to be made use of. Deal with any discolorations or spills immediately. To refurbish and also remove any bad odor, clean the ottoman with cooking soda. These straightforward tips can aid you to bring back the splendor as well as style of your storage ottoman. We at Wuxi Housetex include an unique selection of storage footrests. Being a leading residence furniture manufacturer in China, we provide multi-purpose ottomans that make certain to boost the performance and also aesthetic appeals of any type of home.

[kuajingplus]

What Equipment is Used to Produce Korean Compound Seasoning Sauce?

Recently, with the easing of the epidemic, our company’s emulsifier mixers delivery, after-sales installation and commissioning services have gradually normalized. Our company’s after-sales technicians have gone to many places one after another to provide customers with pre-sales and after-sales services. Foreign trade business is also proceeding normally.

Recently, our company received a thank you call from a customer of a food compound seasoning sauce manufacturer in Shandong. The customer said that after the vacuum emulsifier and other equipment production lines were installed and commissioned, they had already received several batches of orders. The entire line equipment cost has come back. To express our gratitude to our customers for sending us a few boxes of their sauce products for us to try.

After-sales Installation and Commissioning Services for Shandong Customer

This Shandong customer is a Korean professional food processing enterprise that has been engaged in the production of sauces for more than ten years, integrating the production and sales of condiments. The compound sauce products produced by customer enterprises mainly include hot pot sauce, bibimbap, Korean beef sauce, turkey noodle sauce, fried sauce noodle sauce, Korean rice cake sauce, barbecue dipping sauce and so on. In the international business, the client company is the designated supplier of Korean Pizza Hut, Domino’s, Mister, Burger King, Tumbler, CJ, etc.; it supplies many catering chain customers in China.

Since the suppliers are all well-known enterprises, the requirements for product quality and requirements are relatively high. In order to ensure the quality and safety of the produced product sauce, the customer is particularly cautious when selecting the food seasoning sauce production equipment. After a period of comparison of various aspects such as purchasing investigation, the customer finally ordered this set of food seasoning sauce production equipment from YeKeey, including vacuum emulsifying machine and filling machine.

Compound Sauce Production Line Equipment

In this compound sauce production line equipment, YeKeey vacuum emulsifier is the core equipment that determines product quality. Customers say that this vacuum emulsifier is very practical and the price is very high. It can produce a variety of products of their compound sauces. After the dispersing and homogenizing effect of YeKeey emulsifying mixer, the quality of their sauce products has been greatly improved. And because of its sealed vacuum emulsification tank and the convenience and hygienic safety of feeding and discharging, it has also greatly improved several thorny problems that have been plaguing them in the production of their compound seasoning sauces. Production efficiency is improved, labor is saved, and customers are very satisfied.

“Customer satisfaction” has always been the highest goal pursued by YeKeey. Based on this original intention, YeKeey will continue to provide you with high-quality emulsifier mixing mchine. YeKeey is a company specializing in the development, manufacture and sales of fluid mixing equipment. We have a high-level team that is deeply engaged in the fields of fluid homogenization, emulsification, dispersion, mixing and other mixing equipment. We constantly integrate advanced mixing and mixing technology, insist on innovation, and provide services in the fields of energy, chemical industry, food, biomedicine and other fields from stand-alone to Non-standard customization of the entire production system. If you have any needs, please contact YeKeey for consultation!

[kuajingplus]

The Relationship between GRS Recyclable Certification and Packaging

What is GRS？

The abbreviation of GlobalRecycledStandard certification is GRS, which was originally drafted by ControlUnion in 2008. On January 1, 2011, the ownership of this standard was handed over to Textile Exchange. GRS is international, spontaneous, and complete. Through third-party certification, it is a practical industrial tool to examine the company’s product recovery rate, product status, social responsibility, environmental protection, and chemical restrictions.

What is the Purpose of GRS？

In order to prevent waste from being landfilled and recycled, and at the same time reduce the over-exploitation of energy, all human beings are advocating the use of recycled materials, especially the younger generation who are more environmentally conscious and prefer environmentally friendly products for shopping and consumption. Whether it is an environmentally friendly product, consumers can check through the “hang tag”, and some brands can be traced by scanning the code. Increased awareness has given a big boost to the production of recyclable materials.

Drive innovation in solutions to quality issues in the use of recycled materials. Ensuring more sustainable recycling and disposal of materials in final products and reducing the harmful impact of production on people and the environment are all goals and objectives of GRS. The certified company must clearly state the proportion of pre-consumer and post-consumer waste used throughout the declared GRS product. The responsible person of the registered company Documented procedures for minimizing and monitoring waste and emissions; etc.

What are the Benefits of GRS Recyclable Certification?

Environmentally friendly packaging bags are being applied to more and more industries at present, which is a trend and a necessity to protect the environment. Companies such as plastic product packaging, handbags, etc., such product export, may face the problem of customers requesting GRS certification.

In the production process, the factory that processes and produces also needs to be certified by GRS, then the product made is considered a GRS product, and a transaction certificate TC can be issued. If the purchased raw materials have passed the GRS regeneration certification, the processing factory does not have GRS certification, and the produced products cannot issue a TC transaction certificate. The GRS regeneration transaction certificate TC cannot be issued.

The price of GRS food-grade safety bags is also much higher than that of ordinary packaging bags. Today, GRS has been detonated by brands such as ZARA, H&M, ADIDAS, UNIQLO, NIKE, IKEA, GAP, and other brands throughout the entire industry chain, linking all supply chains. Traditional commercial recycled materials, because of their unstable quality and poor physical properties, are mostly lower in price than new materials, and their performance is also worse than new materials.

To meet the requirements of brand customers and meet internationally recognized environmental protection standards (such as GRS), the cost of GRS-certified recyclable packaging is generally about 10% higher than that of new materials, the quality is more stable, and the performance is better than traditional recycled plastic bags. This is a good phenomenon.

Summary

Under the guidance of this trend, the world will become more and more beautiful, people’s lives will become better and better, and a harmonious scene.

Sunkeypackaging is always committed to protecting the environment. We prefer to produce environmentally friendly products, and drive innovation in solutions to quality issues in the use of recycled materials. Warmly welcome your contact with us.

[kuajingplus]

How does the Mixcore Bottom Circulation Homogenizer Emulsifier Work?

The MC series Mixcore Bottom Circulation Homogenizer Emulsifier is a high-efficiency vacuum emulsifier from YeKeey. Its working efficiency is usually higher than that of ordinary emulsifying machines. How does it achieve high working efficiency? Let’s take a look at how the Mixcore Bottom Circulation Homogenizer Emulsifier work.

How does Mixcore Bottom Circulation Homogenizer Emulsifier Achieve High Working Efficiency?

For the Mixcore bottom homogenizer emulsifier system, the homogenizer of its stator and rotor structure is located below the main emulsification tank body.

First, the product in the main emulsifying tank is delivered to the homogenizer through the outlet at the bottom of the tank (which is also the inlet of the homogenizer). Next, in the premixing chamber, the mixing and conveying paddle accelerates the product downwards. There are multiple feed valves around the premix chamber through which powders and liquids can be sucked under a vacuum. All material entering the mixing chamber flows directly into the turbulent flow created by the mixing paddle and mixes immediately to avoid agglomeration.

Next, the pre-mixed product is accelerated horizontally to the rotor-stator homogenizer by means of push paddles. In the rotor/stator section, the rotor will accelerate the product to a peripheral speed of 30 m/s and then drop to 0 m/s over a distance of 1 mm. This means that the product processed in the shear column is subjected to a combination of thrust and shear forces, reducing the size of the emulsified droplets to 1 μm or less.

The pump arm downstream of the rotor/stator then delivers the product to the bypass line. The product can be pumped to the upper part of the main emulsifying tank by a long circuit pump, or directly back to the conical part of the lower part of the tank by a short circuit. In the main tank, a counter-rotating coaxial agitator macro-mixes the product before sending it back to the homogenizer. The tank is equipped with a double jacket that can be heated or cooled with water or steam.

Finally, the finished product is discharged through a recirculation pipe installed at the output of the homogenizer. During the discharging process, you can choose the homogeneous dispersion mode to re-smooth the product, or choose the pumping mode to pump out under pressure without shearing.

Summary

Mixcore high shear vacuum homogeneous emulsifier equipment takes advanced “recirculation emulsification” as the core technology of system design, equipment specifications cover experiment, pilot test to production, and can be used for complex and diversified products in many application fields. Produced to provide scientifically effective homogenization and mixing solutions! Mixcore recirculation vacuum emulsifier has many advantages and features, which can meet the different process and processing needs of various products. Almost all semi-solid products such as suspensions, creams, lotions, and gels can be produced reliably, quickly, and with high quality by Mixcore vacuum emulsifiers. Even sterility requirements can be met.

The above is the working principle of the Mixcore Bottom Circulation Homogenizer Emulsifier. If you have any questions about the product, please contact us for consultation, and professional technical engineers will answer you one-on-one!

[kuajingplus]

Do You Know Degradable Packaging?

Degradable packaging is a new type of packaging developed in recent years, including plastic substitute packaging made of degradable polypropylene film, food packaging based on wood pulp, nanocellulose fibrils, and hydrophobized modified nitrocellulose. Food packaging prepared using sweet potato starch, hydroxypropyl methylcellulose, plant fiber modifiers, etc., and aliphatic polyesters with both biocompatibility and degradability prepared by ring-opening polymerization of cyclic lactones material, which is favored by the market for its environmentally friendly properties.

Degradable food packaging is made of naturally degradable materials such as starch and its derivatives, proteins, cellulose, chitosan, and polylactic acid as raw materials, and can be degraded by chemical modification processes and blending equipment. Degradable materials for food packaging can be divided into three categories according to the degradation mechanism: photodegradation, biodegradation, and composite degradation. They have broad application prospects in food inner packaging film, coating film, food packaging film, food packaging, catering, etc. It is used for the storage and preservation of meat products, dairy products, baked products, and fresh fruits and vegetables.

The polyhydroxy acid biodegradable nanocomposite film material produced by the blown film/cast film process can replace the aluminum foil rolling composite packaging, which can reduce the amount of solid waste by 20% to 30% every year; it is prepared from wheat bran and soybean raw materials. The grain matrix film has good moisture-proof and moisture-proof and inhibits the oxidation of food components; the film made of animal protein collagen is used to package meat food, and the film is made of methyl hydroxy propionyl cellulose is used for forming and filling. , sealing and vacuum packaging, etc., can meet the needs of long shelf life of food, and no packaging waste will be generated after use.

Polylactic acid (PLA) is currently the most widely studied and applied biodegradable material, which is polymerized from lactic acid. There are generally two polymerization methods: one is to use corn, straw, and other renewable resources as raw materials, and the lactic acid monomer is directly polymerized in the solution state; the other is to obtain cyclic dimer lactide from lactic acid and then polycondensate to form a polymer. Lactic acid, also known as the two-step process, is a more mature process. In addition to good biodegradability and biocompatibility, polylactic acid also has good physical and mechanical properties, such as strength, gloss, transparency, and heat resistance. After degradation, carbon dioxide and water are finally generated, which are recognized as environmentally friendly materials, and even the human body also contains lactic acid in a monomeric state.

In some important fields, especially in the express green packaging industry, the product price of degradable materials is high due to the unit price of raw materials, and the degree of application is still low; in food packaging and other industries, there are still limitations on product performance and use, and it is necessary to continue to study how to reduce and traditional material performance gap. At the same time, efforts should be made to develop and promote green products, explore new business forms and models for recycling and recycling, reduce packaging pollution; strengthen the sorting, recycling, and transportation of packaging waste, and standardize the recycling and harmless disposal of waste. There is a long way to go to get rid of the “plastic” bondage.

[kuajingplus]

Pet House Bed Furniture Buying Guide

"Which side are you on?" " Pet side. Nothing else matters." I think that you have checked out a great deal of product descriptions and are wondering what are the excellent pet homes or beds? Prior to you make a final decision, below are some key elements which are worth bearing in mind. In conclusion, you do not want to have actually invested a great deal of effort and time in setting up the pet residence, just to locate that it is merely not fancied by the feline buddy. What to Consider When Getting a Pet House or Bed? Materials First, inspect carefully at what products have actually been used to make the pet house. You require to see to it that the products match to the environment where the particular pet house will be positioned. As an example, if you reside in a warm climate, you should stay clear of thick padded layout which is targeting for cooler regions. Conversely, if you are staying in an especially damp and also moist location, please look out for particular type of wood materials which is most likely to expand and also contract. Further, the pet house will require to supply a suitable degree of defense under wet period if it will sit in a backyard. Nevertheless, if you prepare to place it inside your home or in a covered area like a veranda, you can be extra certain in taking a fabric-coated choice. This is also the preferable alternative when you often tend to take the pet house inside your area for nights, as in the case for a lot of feline carriers. Housetex has a curated collection of distinct pet homes, beds, apartment, carriers and also other pet furniture available on a customized basis to please your distinct need.

Insulation and Heating Effect Closely following the previous section, it deserves knowing a little bit more concerning whether the products made use of in making the pet house are having insulation or in many case home heating feature. If you reside in a location which is freezingly chilly throughout winter season, you may consider insulation as a crucial aspect. If the walls, bottoms, covers as well as rooves of the pet homes are made from materials which have a proper insulation result, they will certainly aid trap in cozy air throughout the wintertime. Inspect Housetex Pet House Series for more information. These include great to touch creamy coverings, cushioning and also various other soft material surface areas and covers, for instance, this Pet Bed Nest with Anti-slip Base. If you are producing a sanctuary for your charming cat during the chillier months of the year, thinking about the insulation result of the materials is specifically essential. Additionally, it deserves understanding to include a heating pad or bed is likewise a recommended alternative for lots of house pet cats. Dimension Purchasing a pet house that is not the appropriate size is a waste of money, so a pet owner must make sure that there suffices space for the pet to play and also lounge inside pleasantly. In case of any kind of uncertainty, constantly choose a bigger dimension as opposed to a smaller sized one. Better, if the pet moms and dad has multiple family pets in the house, he is bound to require a larger pet house due to the fact that those furry ones would enjoy to share the nest freely. Take a look at this Double Round Pet Condo Residence with Padded Top readily available at Housetex, which intelligently offers 2 convenient entries for the little fuzzy ones to appreciate a relaxing hibernation with each other. Toughness and Durability Housetex take these two aspects right into account seriously as they add towards the pet house product standing the test of time. Home pets like cat are likely to bite and also scrape at the surfaces, which can wind up harming the furnishings. Housetex Pet House Collection likewise favors a solid structure design that fits securely with each other to enhance their dependability, such as this Wooden TV Set Pet Apartment Residence with Pet Cat Scratcher, which is a far better indicator of resilience. Certainly, the large majority of clients desire it to be a long-term purchase and do not intend to keep acquiring a brand-new once after time. Many include a warranty which gives an included guarantee. Housetex also can give you with more information at what kind of defense these pet furniture products supply, such as versus water, mold and mildew, or any other components which may cause a concern. Ease of Cleansing It is most likely that a pet parent requires to clean the pet house or bed every now and then, and also she or he does not desire the job to be also time consuming or extremely complicated. Most Housetex Pet House designs feature comfortable pillows or bedding, which are all removable, washable as well as easy to tidy. Assembly The ease of assembly likewise plays an influence on the purchase choice making process, since not every customer is that proficient in the DIY art. It is worth checking out whether any type of devices are needed. Housetex Pet House items are very easy to construct, and also we particularly recommend these unique exchangeable pet nests as well as beds which are convenient adequate to seal up with Velcro or zippers. They are optimal for contemporary households with a hectic schedule, avoiding any type of possible confusion or threat of damage when a tool-involved installment might bring. Forever Count on That We Are! Housetex is a professional furnishings supplier as well as provider since 2007, concentrating on ottoman products, pet residences, baby room furnishings and other way of life accessories. We likewise provide OEM/ODM solution to our clients around the world. We can do modification as per your specifications and requirements. Our yearly production ability exceeds 2000 * 40HQ. Inspect our numerous pet house styles for wholesale costs. You can obtain the very best wholesale cost from us. Any idea, concept or inspiration, please feel free to contact us at info@housetexchina.com.

[kuajingplus]

The Introduction of Stand-up Pouch

Doypack is also called a stand-up pouch, it is a flexible packaging that has a horizontal support structure at the bottom. Whether the bag is open or not, it stands on its own and does not need any support.

Stand-up pouches are a relatively novel form of packaging and have advantages in many aspects, such as improving product quality, enhancing shelf visual effects, being portable, easy to use, fresh-keeping, and good sealability.

The stand-up pouch is laminated by PET/PE, PET/AL/PE/, PET/AL/NY/PE structure, and can also have 2-layer, 3-layer, 4-layer, and other material structures, depending on the packaged products. It is necessary to increase the oxygen barrier protective layer accordingly, reduce the oxygen transmission rate, and prolong the shelf life of the product.

Scope of application:

Stand-up pouch packaging is mainly used in fruit juice drinks, sports drinks, bottled drinking water, absorbable jelly, condiments, and other products. In addition to the food industry, the application of some washing products, daily cosmetics, medical supplies, and other products has gradually increased.

Classification:

1. Ordinary stand-up pouch:

And the general form of a stand-up pouch, adopts the form of four-sealed edges and cannot be re-closed and repeatedly opened. This kind of stand-up pouch is generally used in the industrial supplies industry.

2. Stand up pouch with suction nozzle:

The stand-up pouch with the suction nozzle is more convenient to pour or absorb the contents and can be re-closed and re-opened at the same time, which can be considered as the combination of the stand-up pouch and the ordinary bottle mouth. This kind of stand-up pouch is generally used in the packaging of daily necessities, for beverages, shower gels, shampoos, ketchup, edible oils, jelly, and other liquid, colloidal, semi-solid products.

3. Stand up pouch with zipper:

Self-supporting pouches with zippers can also be re-closed and re-opened. Since the zipper form is not closed and the sealing strength is limited, this form is not suitable for encapsulating liquids and volatile substances. According to the different edge sealing methods, it is divided into four edge sealing and three edge sealing. Four edge sealing means that the product packaging has a layer of ordinary edge sealing in addition to the zipper seal when it leaves the factory. The zipper is then used to achieve repeated sealing and opening, which solves the disadvantage that the zipper edge sealing strength is small and is not conducive to transportation. The three-sealed edge is directly sealed with a zipper edge, which is generally used to hold lightweight products. Self-supporting pouches with zippers are generally used to package some light solids, such as candy, biscuits, jelly, etc., but four-sided self-supporting pouches can also be used to package heavier products such as rice and cat litter.

4. Imitation mouth-shaped stand-up pouch:

Imitation mouth stand-up pouches combine the convenience of stand-up pouches with suction nozzles and the cheapness of ordinary stand-up pouches. That is, the function of the suction nozzle is realized by the shape of the bag body itself. However, the mouth-shaped stand-up pouch cannot be re-sealed. Therefore, it is generally used in the packaging of single-use liquid, colloidal and semi-solid products such as beverages and jelly.

5. Special-shaped stand-up pouch:

That is, according to the needs of packaging, new stand-up bags of various shapes are produced by changing on the basis of traditional bag types, such as waist design, bottom deformation design, handle design, etc. It is the main direction of the value-added development of self-supporting bags.

With the advancement of society and the improvement of people’s aesthetic level, as well as the intensification of competition in various industries, the design and printing of stand-up pouches have become more and more colorful, and its manifestations are more and more.

[kuajingplus]

How to Choose a Best Small Storage Ottoman Stool for a Living Space?

Need a small ottoman with storage? Create a versatile space by taking a small ottoman stool with storage that can be used as seating while offering a hidden compartment. Housetex presents you with great small storage ottomans in novelty styles that can easily add an appealing cozy touch to any modest place.

A compact ottoman stool with storage is always an ideal option, especially for an armchair or if you would like to have a favorite footrest while enjoying a comfortable sofa. Small ottomans are easy to pick up and move around, offering great flexibility for wherever you would like to be sitting.

Housetex has researched dozens of small storage ottoman designs and is confident to offer our clients what we consider the best compact storage ottoman stools, including but not limited to rectangle, square, and round ottomans with storage function.

Check out this Rectangle Storage Ottoman Stool with Wood Legs. A plush, cushioned top, round wooden feet, and smart storage compartment design make this traditional-style ottoman piece a handsome addition to your living space. It provides plenty of soft cushioning on top for you to put your feet up or for seating purpose comfortably, while there is also an ample storage unit under the easy-handled lid, that effectively help hide away clutter and hold kids’ toys, maximizing your space intelligently.

You can store blankets, pillows, or anything else under the lid, making it an excellent double-duty piece of furniture that always keeps the house clean and well tidy. It comes in a pleasant neutral color and can go with any décor.

Housetex small storage ottomans are also built to last. One nice feature is their frames are usually made of solid MDF or wood, durable for many years of use. In addition, they are often upholstered in a soft, comfortable, yet durable linen or velvet fabric, with either metal or wood legs for enhanced sturdiness. Their tops have sponge foam underneath the linen or velvet fabric cover, making them as comfortable as a sofa surface for hours of relaxing.

You will enjoy these ottoman pieces for years to come. It is known that the longer a piece is used, the more difficult it is to part with, and the company of time will produce a strong sense of dependence. When we return home from our wanderings, it is often the familiar environment and the objects we have used that make us feel the most stable and belonging from within.

Here are some insider tips for you.

How to Determine the Right Height Ottoman Stool?

Special attention should be paid to the height of an ottoman. If the ottoman stool is too high for the armchair or sofa, it will be uncomfortable to put your feet up. However, if the ottoman stool is too low, it will also make it inconvenient to serve as a side table or may not provide ample storage space. The ideal height for an ottoman stool is between 40cm and 45cm.

“Please measure the height between the armchair seat and the floor to get an idea of the best height of the ottoman stool for your living space, especially when you are taking the ottoman as a footrest. If you buy small ottoman stools, make sure they are at least 40cm to 45cm high”. Commented by James Tang of Housetex.

How to Find the Right Color Ottoman Stool?

The color of an ottoman offers the owner an opportunity to express his or her style.

If you have a modern, country-style, or shabby chic living space, matching the color of the upholstery to your current home furniture can help the ottoman blend in with the rest of the décor. However, there is no need to match the colors exactly. Try picking an alternative tone or complementary shade to add more depth to the space. A Light Gray Ottoman Stool with Wooden Legs matches well with an armchair in natural wood color and with gray cushions. Or try placing an emerald green Round Storage Ottoman Stool in a background surrounded by sage green plants.

For instance, Very Peri, the representative color of the year 2022 released by PANTONE, the international color authority, is a new color combining the qualities of the beloved blue color family with a warm violet-red undertone. With the enchanting rich violet-red infused with the healing blue hue, Very Peri is full of energy and joy, and highlights courageous creativity and dynamic presence, perfectly representing our longing for the future with a fresh perspective of the present.

Housetex is using the healing Very Peri in ottoman furniture products as we believe it can deliver both visual and user experiences of generous beauty and creative curiosity. By the time the Spring is here, Housetex can offer our clients perfect Small Ottoman Stools and other furniture pieces in Very Peri with more relaxing and comfortable functions. When the nice-to-touch ottoman products collide with shades of blue and violet, there is no doubt less stereotype and more vitality and comfort in the house.

Further, to make a statement or to make the ottoman the focal point of the room, a contrasting or bright color is the best pick. Colors that can make a space visually pop are green, yellow, purple, red, and of course for this year Very Peri. For a stylish effect, pair a Very Peri Ottoman Stool against a light gray sofa. If you have limited space, you will find this new color Very Peri can make the room appear larger but cozier at the same time with its perfect combination of cool blue and warm violet-red undertones.

Housetex, a leading custom ottoman furniture supplier in China, is led by a team of industry talents with unique insights and over one decade of experience in every phase of the business. It is committed to high efficiency and customer satisfaction, timely responding to evolving ottoman furniture fashions and trends both home and abroad. While taking great pride in our own design capability, Housetex also cooperates with many clients on OEM or ODM basis worldwide, striving for the perfect balance between style, comfort quality, and price. If you need any further information about our ottoman furniture products, please feel free to drop us an email at info@housetexchina.com.

[kuajingplus]

Stainless steel surface treatment process

Stainless steel has unique strength and superior anti-corrosion properties. At the same time, it has high wear resistance and is not easy to rust. Therefore, it is widely used in the chemical industry, food machinery, electromechanical industry, and household appliance industry. The application and development prospects of stainless steel will become wider and wider, but the application and development of stainless steel largely determine the degree of development of its surface treatment technology.

Introduction of stainless steel varieties

Stainless steel generally contains high-quality metal elements such as chromium (CR), nickel (NI), molybdenum (MO), and titanium (TI). Common stainless steels include chromium stainless steel and nickel-chromium stainless steel. Classification from the metallographic structure of stainless steel: austenitic stainless steel, martensitic stainless steel

Stainless steel surface treatment varieties

Whitening treatment of the natural color of the surface

Surface mirror stone bright treatment

Surface coloring treatment

1. The surface natural color whitening treatment

In the process of processing, the stainless steel undergoes coiling, edge binding, welding, or the handler’s warm surface fire treatment, resulting in a black oxide scale. This kind of hard gray-black oxide scale was usually removed by a strong corrosion method with hydrofluoric acid and nitric acid in the past. However, this method is costly, pollutes the environment, and is harmful to the human body. The corrosion is relatively large, and it is gradually eliminated.

At present, there are two kinds of treatment methods for this kind of oxide scale: (1) Using shot peening/sandblasting method. (2) Use chemical methods.

2. Mirror bright treatment method of stainless steel surface

According to the complexity of stainless steel products and the different requirements of users, mechanical polishing, chemical polishing, electrochemical polishing, and other methods can be used to achieve mirror stone luster.

Mechanical polishing

Good leveling performance, bright labor intensity, serious pollution, difficult to process complex parts, reduced gloss, high investment, and cost. Simple workpieces, medium and small products, and complex parts cannot be processed. The gloss of the entire product is not consistent, and the gloss retention time is not long.

Chemical polishing

Low investment, complex parts can be polished, high efficiency, high speed, insufficient brightness, polishing liquid to be humidified, gas overflows, and wind-friendly equipment is required.

Electrochemical polishing

Mirror gloss, long-term maintenance, stable process, less pollution, low cost, and good anti-pollution performance. The one-time investment is large, and the complicated parts must be equipped with tooling and auxiliary electrodes.

3. Surface coloring treatment

Stainless steel coloring not only imparts various colors to stainless steel products, increases the variety of products, but also improves the wear resistance of products.

There are several coloring methods for stainless steel:

(1) Ion deposition of oxides or oxides

(2) High-temperature oxidation method

(3) Chemical oxidation method, electrochemical oxidation method

(4) Gas-phase cracking method

Briefly describe the overview of various methods:

(1) The ion deposition oxide or oxide method is to place the stainless steel workpiece in a vacuum coating machine for vacuum evaporation plating; this method is suitable for mass product processing. Because of the large investment and high cost, small-batch products are not economical.

(2) The high-temperature oxidation method is to immerse the workpiece in a specific molten salt to maintain a certain process range, so that the workpiece forms a certain thickness of oxide film, and presents a variety of different colors.

(3) The chemical method is to form the color of the film through chemical oxidation in a specific solution. However, if the color of a batch of products is consistent, it must be controlled by a reference telegram.

(4) The electrochemical method is to form the color of the film through electrochemical oxidation in a specific solution.

(5) The gas-phase cracking method is more complicated and less used in industry.