labnicsltd

[labnicsltd]

Freeze Dryer NFD-104

Labnics freeze dryer is a multi-manifold lyophilization unit for long-term preservation of biological, biomedical or food samples. It offers a 0.08m² freezing area, 3-4kg/24h ice condenser, air cooling ambient temperature ≤25℃, an acrylic drying chamber for easy sample viewing and pre-freezing.

[labnicsltd]

Freeze Dryer NFD-103

Labnics freeze dryer is a multi-manifold lyophilization unit for long-term preservation of biological, biomedical and food samples. Features include 0.08m² freezing area, 1L tray capacity, 6kg moisture trapping, a pre-freeze function, adjustable plates and low-noise compressor.

[labnicsltd]

Freeze Dryer NFD-102

Labnics freeze dryer multi-manifold freeze dryer offers 0.12㎡ drying area, 4 trays, 140mm cold trap depth, and 2L/S pumping speed. Compact, all-in-one design with patented gas diversion ensures no leaks and strong ice retention—ideal for preserving biological and food samples in low-temperature desiccation.

[labnicsltd]

Freeze Dryer NFD-101

Labnics freeze dryer is a multi-manifold lyophilizer for long-term preservation of biological, biomedical, or food samples. It offers a 0.12m² freezing area, 1.2L tray capacity and 3-4 kg/24h ice capacity. Features include a stainless-steel, corrosion-resistant cold trap, compact design and user-friendly control panel.

[labnicsltd]

Automatic Fraction Collector NAFC-100

Labnics automatic fraction collector efficiently collects chromatography-separated fluid components, accommodating up to 100 tubes with a 12ml max capacity. It features a safe, round turntable, automatic leakage alarm and a watertight pallet seal, operating in 0-40℃ and <85% humidity.

[labnicsltd]

Commercial Food Dehydrator NCFD-108

Labnics commercial food dehydrator preserves food by reducing moisture content, extending shelf life and ensuring quality storage. it offers a 155L capacity, gap in-between rack 35mm, number of trays 20 and temperature range 30°C – 90°C. unit features a digital control with touch screen panel, built-in heat protection and advanced drying performance.

[labnicsltd]

Flow Cytometer NFC-101

Labnics flow cytometer offers fully automatic detection with a speed of over 50,000 events/sec. It features up to 3 lasers (405nm/100mW, 488nm/60mW, 638nm/80mW) with an APD detector and a carryover rate of <0.1%. It also has flexible injection options for quick loading efficiency.

[labnicsltd]

Flow Cytometer NFC-100

Labnics flow cytometer is equipped with dual laser systems emitting light at wavelengths of 488nm and 638nm, minimum sample volume 10μL and tube numbers of loader 40 tubes and 96 holes. unit features a liquid pathway automation, clinical LIS integration available and autonomous power-failure saving mode.

[labnicsltd]

Flash Point Tester NFPT-101

Labnics flash point tester measures temperatures between 40°C and 350°C, platinum resistance temperature test, data Storage 1000 analysis results and environmental temperature 10 to 35℃. unit features a automatic cooling lock system, equipped with a thermal printer and print results option.

[labnicsltd]

Flash Point Tester NFPT-100

Labnics flash point tester is compliant with electronic mode of ignition that promotes conventional use of energy. it offers a 50 to 200℃ temperature measurement, precision 0.005 and environment temperature 10-40℃. unit features a electronic ignition mode, equipped with in-built printer and lifting arm.

[labnicsltd]

Flame Photometer NFP-101

Labnics flame photometer measures K 0-100ppm and Na 0-160ppm concentrations via flame color and wavelengths. It has a minimum suction volume of <6mL/min, supports 3 display channels, offers flame-out protection, saves calibration curves and allows single-point calibration.

[labnicsltd]

Flame Photometer NFP-100

Labnics Flame Photometer analyzes metal ion concentrations such as K (0-100 ppm) and Na (0-160 ppm) by detecting flame color and excitation wavelengths. It features 2 channels, operates at 10°C - 35°C and includes a multilingual user interface, flame-out protection and selectable concentration units.

[labnicsltd]

Filter Integrity Tester NFIT-101

Labnics Filter Integrity Tester checks filter integrity from 100 to 10,000 mbar with a bubble point pressure of 100 to 8000 mbar and water intrusion rates of 0.01 to 100 ml/min. It operates at +5℃ to 40℃ and includes audit trail functionality, secure Staubli connectors and switchable pressure units.

[labnicsltd]

Filter Integrity Tester NFIT-100

Labnics Filter Integrity Tester is a compact device for comprehensive filter integrity testing, supporting all standard methods and ultrafiltration system testing. It operates at 100-260VAC, 50Hz, 120W, with ambient conditions of +5℃ to +40℃ and 10-80% humidity. It includes 120-set reservation storage.

[labnicsltd]

Fiber Analyzer NFA-101

Labnics fiber analyzer is a fully automated unit that offers a measurement range spanning from 0.1% to 100% fiber content. it offers a measuring Range 0.1% to 100%, temperature Range Ambient 100°C and time consumption/run 120 Mins. unit features a fully automatic digesting system and intuitive user interface for ease of operation.

[labnicsltd]

Fiber Analyzer NFA-100

Labnics fiber analyzer is semi-automated for determining raw/crude fiber, with a 0.1%–100% range and 0.5g–3g sample weight. It has a 10-12 min pre-heating time, ensures operator safety, prevents overflow of corrosive liquids and is eco-friendly with low energy consumption.

[labnicsltd]

Fat Analyzer NASE-100

Labnics fat analyzer determines total fat in samples using various solvents like hexane/dichloromethane. It offers RT ±5°C to 300°C, ±1°C accuracy, 6pcs/batch capacity, over-temperature safety, timer functions, a user-friendly interface and a triple alarm system.