mosillubes-blog

[mosillubes-blog]

Lubrication is the process or technique of using a lubricant to reduce friction and wear in a contact between two surfaces. The study of lubrication is a discipline in the field of tribology.

Lubricants can be solids (such as Molybdenum disulfide MoS2),[1] solid/liquid dispersions (such as grease), liquids (such as oil or water), liquid-liquid dispersions[citation needed] or gases.

Fluid-lubricated systems are designed so that the applied load is partially or completely carried by hydrodynamic or hydrostatic pressure, which reduces solid body interactions (and consequently friction and wear). Depending on the degree of surface separation, different lubrication regimes can be distinguished.

Adequate lubrication allows smooth, continuous operation of machine elements, reduces the rate of wear, and prevents excessive stresses or seizures at bearings. When lubrication breaks down, components can rub destructively against each other, causing heat, local welding, destructive damage and failure.

[mosillubes-blog]

Industrial Lubricants

Industrial Lubricants

Lubrication is the process or technique of using a lubricant to reduce friction and wear in a contact between two surfaces. The study of lubrication is a discipline in the field of tribology.

Lubricants can be solids (such as Molybdenum disulfide MoS2),[1] solid/liquid dispersions (such as grease), liquids (such as oil or water), liquid-liquid dispersions[citation needed] or gases.

Fluid-lubricated systems are designed so that the applied load is partially or completely carried by hydrodynamic or hydrostatic pressure, which reduces solid body interactions (and consequently friction and wear). Depending on the degree of surface separation, different lubrication regimes can be distinguished.

Adequate lubrication allows smooth, continuous operation of machine elements, reduces the rate of wear, and prevents excessive stresses or seizures at bearings. When lubrication breaks down, components can rub destructively against each other, causing heat, local welding, destructive damage and failure.

[mosillubes-blog]

A season of hope, a season of love, a season of blessings. May the divine light of Christmas shine in your life this season. Merry Christmas!

Visit Mosil Lubricants for more information.

[mosillubes-blog]

Dielectric Grease | Electrically conductive greases | By Mosil Lubricants

[mosillubes-blog]

ZS - 44m | Galva Coating - Bulk | Zinc Rich Paint

It is a coating ( in bulk form) fortified with zinc and other metallic powder for the prevention of rust and corrosion which restores the galvanized surfaces. It is a fast-drying permanent primer for paints, lubricating coatings, bonded coatings, etc. It provides excellent corrosion protection especially in cases of cathodic corrosion.

Description

AREA OF APPLICATION

Repairing of galvanized surfaces that have been damaged by welding, machining, etc., Protection of all polished metal surfaces, Corrosion Protective Primer for paints, coatings, etc., Cosmetic repairs in pipes, TV Towers, Hand Rails, Rims, Storage Tanks, etc.

BENEFITS

Ready to use touch up spray for galvanized surfaces

Resists rust and corrosion on any iron or steel surfaces

Contains no Chromates or methylene chlorides which are injurious to health

CHARACTERISTICSTYPICAL VALUES

AppearanceMetallic Grey

Specific Gravity2.65 ± 0.2

% Volatiles (w/w)< 30

OdourMild

Copper Strip CorrosionNegative

Area of CoverageApprox. 3 – 4 sq meter per kg

Humidity Cabinet*60 days (min)

PACKING: 1 Kg Jar, 5 Kg Jar Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more information, please visit Mosil Lubricants.

[mosillubes-blog]

ZS - 44 | Bright Galva Coating - Bulk | Zinc Rich Paint.

It is a Bright Silverish coating (in bulk form) fortified with zinc and other metallic powder for the prevention of rust and corrosion which restores the galvanized surfaces to its original finish. It is a fast-drying permanent primer for paints, lubricating coatings, bonded coatings, etc. It provides excellent corrosion protection especially in cases of cathodic corrosion.

Description

AREA OF APPLICATION

Repairing of galvanized surfaces which have been damaged by welding, machining, etc., Protection of all polished metal surfaces, Corrosion Protective Primer for paints, coatings, etc., Cosmetic repairs in pipes, TV Towers, Hand Rails, Rims, Storage Tanks, etc.

BENEFITS

Ready to use touch up spray for galvanized surfaces

Resists rust and corrosion on any iron or steel surfaces

Contains no Chromates or methylene chlorides which are injurious to health

CHARACTERISTICSTYPICAL VALUES

AppearanceBright Silverish

Specific Gravity0.9 ± 0.1

% Volatiles< 65%

OdourMild

Copper Strip

CorrosionNegative

Drying Time

(Touch Dry)15 – 20 minutes

Drying Time

(Complete Dry)12 – 24 hours

PACKING: 1 Litre Jar, 4 Litre Jar Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more information, visit Mosil Lubricants

.

[mosillubes-blog]

Zinc Rich Paint | SPRAY - 44e(SP) | Bright Galva Coating

It is a Bright Silverish coating fortified with zinc and other metallic powder for the prevention of rust and corrosion which restores the galvanized surfaces to its original finish. It is a fast-drying permanent primer for paints, lubricating coatings, bonded coatings, etc. It provides excellent corrosion protection especially in cases of cathodic corrosion.

Description

AREA OF APPLICATION

Repairing of galvanized surfaces that have been damaged by welding, machining, etc., Protection of all polished metal surfaces, Corrosion Protective Primer for paints, coatings, etc., Cosmetic repairs in pipes, TV Towers, Hand Rails, Rims, Storage Tanks, etc.

METHOD OF APPLICATION

Ensure that the surface to be coated is clean, degreased and dry. (Use MOSIL SPRAY – 18 if necessary for cleaning and degreasing). Shake the container of SPRAY – 44e SP thoroughly (approx. 1 minute) and spray at a distance of 25 – 30 cm such that a thin uniform film is obtained. Allow the film to dry and ensure that the component is not touched which would leave a fingerprint mark etc.

After use inverts the can and clears the nozzle by pressing the actuator for a period of 30 seconds.

BENEFITS

Ready to use touch up spray for galvanized surfaces.

Resists rust and corrosion on any iron or steel surfaces.

It contains no Chromates or methylene chlorides which are injurious to health.

CHARACTERISTICSTYPICAL VALUES

AppearanceBright Silverish

Specific Gravity0.85 ± 0.1 (Bulk)

% Volatiles< 85%

OdourMild

Copper Strip

CorrosionNegative

Drying Time

(Touch Dry)2 – 3 minutes

Drying Time

(Tack Free)8 – 10 minutes

Drying Time

(Complete Dry)12 – 24 hours

The purity of Zinc in

Finished Film> 98%

PropellantEco-friendly Blend

of Propane &

Butane

ContainerAerosol tin with

25mm valve and

actuator

PACKING: 500ml Eco-friendly Aerosol Spray Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more information, please visit Mosil Lubricants.

[mosillubes-blog]

Zinc Rich Paints | SPRAY - 44E - N | Galva Coating

It is a Grey Silverish coating fortified with zinc and other metallic powder for the prevention of rust and corrosion which restores the galvanized surfaces to its original finish. It is a fast-drying permanent primer for paints, lubricating coatings, bonded coatings, etc. It provides excellent corrosion protection especially in cases of cathodic corrosion.

Description

AREA OF APPLICATION

Repairing of galvanized surfaces that have been damaged by welding, machining, etc., Protection of all polished metal surfaces, Corrosion Protective Primer for paints, coatings, etc., Cosmetic repairs in pipes, TV Towers, Hand Rails, Rims, Storage Tanks, etc.

METHOD OF APPLICATION

Ensure that the surface to be coated is clean, degreased and dry. (Use MOSIL SPRAY – 18 if necessary for cleaning and degreasing). Shake the container of SPRAY – 44e – N thoroughly (approx. 1 minute) and spray at a distance of 25 – 30 cm such that a thin uniform film is obtained. Allow the film to dry and ensure that the component is not touched which would leave a fingerprint mark etc.

After use inverts the can and clears the nozzle by pressing the actuator for a period of 30 seconds.

BENEFITS

Ready to use touch up spray for galvanized surfaces.

Resists rust and corrosion on any iron or steel surfaces.

It contains no Chromates or methylene chlorides which are injurious to health.

CHARACTERISTICSTYPICAL VALUES

AppearanceGrey Silverish

Specific Gravity1.00 ± 0.1 (Bulk)

% Volatiles< 70%

OdourMild

Copper Strip

CorrosionNegative

Drying Time

(Touch Dry)2 – 5 minutes

Drying Time

(Tack Free)5 – 10 minutes

Drying Time

(Complete Dry)12 – 24 hours

The purity of Zinc in

Finished Film> 98%

PropellantEco-friendly

Blend of Propane

& Butane

Contents500ml when

packed

ContainerAerosol tin with

25mm valve and

actuator

PACKING: 500ml Eco-friendly Aerosol Spray Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more information on zinc rich paints, please visit Mosil Lubricants.

[mosillubes-blog]

Zinc Rich Paint | SPRAY - 44 | Bright Galva Coating

It is a Bright Silverish coating fortified with zinc and other metallic powder for the prevention of rust and corrosion which restores the galvanized surfaces to its original finish. It is a fast-drying permanent primer for paints, lubricating coatings, bonded coatings, etc. It provides excellent corrosion protection especially in cases of cathodic corrosion.

Description

AREA OF APPLICATION

Repairing of galvanized surfaces that have been damaged by welding, machining, etc., Protection of all polished metal surfaces, Corrosion Protective Primer for paints, coatings, etc., Cosmetic repairs in pipes, TV Towers, Hand Rails, Rims, Storage Tanks, etc.

METHOD OF APPLICATION

Ensure that the surface to be coated is clean, degreased and dry. (Use MOSIL SPRAY – 18 if necessary for cleaning and degreasing). Shake the container of SPRAY – 44 thoroughly (approx. 1 minute) and spray at a distance of 25 – 30 cm such that a thin uniform film is obtained. Allow the film to dry and ensure that the component is not touched which would leave a fingerprint mark etc.

After use inverts the can and clears the nozzle by pressing the actuator for a period of 30 seconds.

BENEFITS

Ready to use touch up spray for galvanized surfaces

Resists rust and corrosion on any iron or steel surfaces

Contains no Chromates or methylene chlorides which are injurious to health

CHARACTERISTICSTYPICAL VALUES

AppearanceBright Silverish

Specific Gravity0.85 ± 0.1 (Bulk)

% Volatiles< 85%

OdourMild

Copper Strip

CorrosionNegative

Drying Time

(Touch Dry)5 – 8 minutes

Drying Time

(Tack Free)10 – 12 minutes

Drying Time

(Complete Dry)12 – 24 hours

PropellantEco-friendly

Blend of Propane

& Butane

Contents500ml when

packed

ContainerAerosol tin with

25mm valve and

actuator

PACKING: 500ml Eco-friendly Aerosol Spray Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more information, please visit Mosil Lubricants.

[mosillubes-blog]

Dielectric grease | WP - 300 | Multipurpose Graphite Grease.

It is heavy-duty grease with high-quality lubricating grade graphite flakes and anticorrosive additives to withstand heavy loads in a humid and hostile environment. It is adhesive and does not get washed away when exposed to water and weather. Also being electrically conductive, it can be recommended for heavy-duty electrical equipment.

Description

AREA OF APPLICATION

Heavily loaded plain and anti-friction bearings, Plungers, Guides, Hoisting engines, Chains, Conveyors, Loaded turntables, Bearing of ERW machines, Seam welding machines.

BENEFITS

Works effectively in a humid and corrosive atmosphere

Reduces friction and wear

Shortens maintenance downtime

Withstanding heavy loads and high temperature

CHARACTERISTICSTYPICAL VALUES

AppearanceSmooth

Homogeneous

BaseLithium

ColorBlack

Specific Gravity0.95 ± 0.05

Drop Point180°C (min)

Consistency# 2

Worked Penetration265 – 295

Water ResistanceExcellent

Copper Strip

CorrosionNegative

AdditivesAntioxidant,

Antiwear,

Anticorrosion

Percentage Solids14 – 18 %

PACKING: 1 Kg Jar, 20 Kg Pail, 180 Kg Drum Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more information, please visit Mosil Lubricants.

[mosillubes-blog]

Dielectric grease  | SN - 41 | High Temperature, Heavy Duty Silicone Grease.

A black Silicone grease fortified with anti-corrosive and E.P. additives withstanding very high temperatures, making it suitable for a wide range of industrial applications. It is also electrically conductive, hence recommended for electrical contact applications in high voltage switch gears.

Description

AREA OF APPLICATION

All types of anti-friction Ball and Roller bearings operating at medium speeds and very high temperatures, Governor linkages, Ball and Sockets, Switchgears, Contactors, OLTCs, etc.

BENEFITS

Non-melt / Non-drip

Performs satisfactorily under very high temperature

Reduces maintenance downtime

Extends re-lubrication interval

Chemically inert

CHARACTERISTICSTYPICAL VALUES

AppearanceSmooth Tacky

Grease

BaseSynthetic,

Inorganic

ColorBlack

Specific Gravity1.0 ± 0.05

Copper Strip

CorrosionNegative

Temperature

Range-18° C to 300° C

Consistency

(NLGI)# 2

Worked

Penetration265 – 295

Drop PointNone

AdditivesAntiwear,

Antioxidant,

Anti-rust &

Anticorrosion

Water ResistanceExcellent

Seal CompatibilityPass

PACKING: 1 Kg Jar, 20 Kg Pail Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more information, please visit Mosil Lubricants

[mosillubes-blog]

Dielectric grease | GS - 65 | Dielectric Sealant-Cum-Lubricant

A Silicone-based compound acting as an excellent water repellent Dielectric Sealant-Cum-Lubricant. It has very good oxidation resistance at high temperatures, making it suitable over a wide working temperature range. A fine Film of Mosil GS – 65 is sufficient to prevent flashovers, corona discharge, and tracking, thereby minimizing electrical leakage. It is compatible with all insulating materials.

Description

AREA OF APPLICATION

As a dielectric sealant/lubricant for electrical insulators, Battery terminals, Cable and cable connectors, EHT connections, Electronic components and Ignition systems of automobile, Plastic and rubber components

BENEFITS

An excellent insulating compound

Highly adhesive and water repellent

Protects from corrosion

Reduces maintenance downtime

Prevents weathering of rubber seals

CHARACTERISTICSTYPICAL VALUES

AppearanceSmooth Tacky

ColorLight Gray,

Translucent

BaseSilicone

Specific Gravity1.0 ± 0.1

Drop PointNone

Consistency

(NLGI)2 – 3

Worked

Penetration250-350

Water ResistanceExcellent

Copper Strip

CorrosionNegative

Dielectric Strength

(kV/mm)16 kV / mm (min)

Dielectric

Constant2.9 (min)

Dissipation Factor0.003 (max)

Evaporation Loss

(24Hrs @ 200°C)2.5 % (max)

Bleed

(24 Hrs @ 200°C)2.5 % (max)

Temperature

Range-50°C to 200°C

PACKING: 1 Kg Jar, 20 Kg Pail Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more details, please visit Mosil Lubricants

.

[mosillubes-blog]

Dielectric grease  | EC - 511 | Electrical Contact Grease

A synthetic Electrical Contact grease specially formulated to provide extended contact life under moderate to heavy mechanical load by protecting the contacts from frottage corrosion and wear. It is based on highly stable synthetic oil with no Silicones eliminating problems caused by Silicone Migration. It has excellent penetrating and coating properties, reducing heavy arcing conditions and works very effectively in a corrosive industrial environment. Before applying MOSIL EC – 511 the contact part should be cleaned with our SPRAY – 18. (Plastic compatible cleaner – degreaser).

Description

AREA OF APPLICATION

Contactors, Sliding and Rotary Contacts, Any other contact application where the possibility of contact resistance built up exists.

BENEFITS

Improves contact reliability

Excellent lubricant for plastic to plastic, plastic to metal and metal to metal components

Protects from wear and corrosion

Chemically inert

Extremely low torque

CHARACTERISTICSTYPICAL VALUES

AppearanceSmooth

Synthetic Grease

BaseSynthetic /

Complex Lithium

ColorBeige to

Light Brown

Specific Gravity0.85 ± 0.1

Drop Point180°C (min)

Consistency

(NLGI)# 1

Worked

Penetration310 – 340

Water ResistanceExcellent

Copper Strip

CorrosionNegative

Temperature

Range-50°C to 140°C

CompatibilityABS, Nylon,

Polycarbonate,

Polypropylene,

Noryl etc.

PACKING: 1 Kg Jar Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.

For more details, please visit Mosil Lubricants.

[mosillubes-blog]

Dielectric grease | EC - 424 | Electrically Conductive Grease

It is conductive grease suitable for the transmission of electricity, especially at high voltages. It also conducts heat away from its source and protects the electrical contacts from wear and corrosion. MOSIL EC – 424 forms a very tenacious conductive film on the contact surface permitting very little voltage drops across the contacts and withstanding severe arcing that occurs in high voltage lines. It is thermally stable, oxidation resistant grease suitable for high-temperature applications.

[mosillubes-blog]

MOSILBOND - 100

This is a suspension of microsize Molybdenum Disulphide in a binder-solvent system of resinous nature to achieve a bonded lubricating film over various surfaces. It can be cured by Air drying or better by curing @120°C for 60 minutes in an oven.

[mosillubes-blog]

METASPRAY | Copper Based Anti Seize Compound

An organometallic complex of copper, lead and other solids to form a non-melting anti-seize lubricating compound. It is further fortified with highly effective oxidation and corrosion inhibitors to combat environmental severities. It forms a protective film on the metal surfaces which ensures trouble-free protection against seizure, corrosion pitting and galling of a metal surface. It is a lubricant with the unusual anti-seize quality and rust preventive properties. It is ideal for preventing seizures under rusting and corrosion environments.

[mosillubes-blog]

SAM - 2200 | White Assembly Paste

A synthetic hydrocarbon grease with highly stable chemical additives like rust and corrosion inhibitor and anti-oxidants. It is highly inert and has an excellent fluidity at machinery temperatures (upto -50°C) making it applicable to a wide range of industrial applications including applications involving plastic and rubber components.