neospeckorea - Tumblr blog

[neospeckorea]

Throttle and Pyro Valve Manufacturer In Korea| NEOSPEC

NEOSPEC is a throttle and pyro valve manufacturer in Korea and supplying products for space launch vehicle propulsion units such as GGI, pyro valve, and more. Since its inception in 2009, they have continuously researched and developed in various fields such as the defense industry, aerospace industry, and semiconductor industry. They make the best products and are well known for their performance.

Neospec participated in the development of a Korean launch vehicle and created products such as the combustor igniter, GGI igniter, and pyro valve, all of which are essential components of the propulsion engine. Neospec has been mass-produced successfully, and it manufactures initiators and nozzles in the defense industry, as well as Dome in the semiconductor industry.

Neospec Aerospace Parts Pyro-Valve

Pyro valve is a propulsion system units for aerospace launch vehicles and military weapons that are used for opening or closing flow passage to normally supply propellant and pressurant so that the explosions in the valve can operate cylinders.

 The Pyro valve, which is used to open and close flow passages, is powered by electronic energy in the form of small pulses and has the benefits of high reliability, small size, light weight, quick response time, and high hermeticity.

Neospec supplies various items, including the products of NC (Normally Closed), NO (Normally Open), screw and weldable tube interfaces (1/4"~1"), etc. They also have a dual product that merged NC and NO into one.

Specifications of Pyro-Valve

Ø  Fluid Compatibility: Helium, Nitrogen, Air

Ø  Size: 1/4“, 1/2“, 1“ N/C only, Other sizes available

Ø  Type: N/C & N/O, Single & Dual

Ø  MEOP: 23 MPa

Ø  Proof Pressure: 1.1 x MEOP (25 MPa)

Ø  Op Temperature: 90 ~ 333 K

Ø  Leakage: < 1x10-6 scc/s (GHe)

Ø  Response Time: < 7ms (Mechanical)

If you are looking for anaerospace parts pyro-valve, you can find them at Neospec.

 Click here to contact Neospec.

 View more: NEOSPECThrottle and Pyro Valve Manufacturer In Korea

[neospeckorea]

Gas Generator Igniter and Combustion Chamber Igniter Manufacturer l NEOSPEC

NEOSPEC has been continuously researching and developing since its inception in 2009 in various fields such as the defense industry, aerospace industry, and semiconductor industry. They make the best products and are known for their high quality.

Neospec participated in the development of a Korean launch vehicle, developing products such as the combustor igniter, GGI igniter, and pyro valve, all of which are critical components of the propulsion engine. Neospec has been successfully mass-produced, and it produces initiators and nozzles in the defense industry, as well as Dome in the semiconductor industry.

Neospec Gas Generator Igniter

Mounted on space launch vehicles and missiles, it takes the role of initiating gas generator that generates high-pressure gas to operate turbine of turbo pumps. The gas generator igniter is small-sized and highly reliable,  so it is applied in various ways, such as being used as an igniter for small-sized engines.

Gas Generator Igniter Specifications

Ø  Mass: < 0.5 kg

Ø  MEOP: 6 MPa

Ø  Body Proof pressure: 1.3 x MEOP (9 MPa)

Ø  Op Temperature: 233 ~ 333 K

Ø  Leakage: < 1x10-7 scc/s (GHe)

Ø  Response Time: < 7ms (Mechanical)

 Neospec Combustion Chamber Igniter (7T/75T)

Combustion Chamber igniter is a part related to initial ignition of the launch of space launch vehicles that are connected to a dual pyro valve, cartridge at the front, and NC pyro valve at the rear. And the cartridge is equipped with two three-way ball valves for TEAL (triethylaluminium) charging.

The operation mechanism is comparably simple, highly reliable, and has a fast response time and high hermeticity that can be used at high pressure of 125 bar and low temperature (below -40℃) and is supplied in various sizes.

Specifications of Combustion Chamber Igniter

Ø  Fluid Compatibility: TEAL (Triethylaluminium)

Ø  Size: 1/4", 1/2", other sizes available

Ø  MEOP: 23 MPa

Ø  Proof pressure: 23 MPa

Ø  Proof pressure: 1.1 x MEOP (25 MPa)

Ø  Op Temperature: 90 ~ 333 K

Ø  Leakage: < 1x10-6 scc/s (GHe)

Ø  Response Time: < 7ms (Mechanical)

 If you are looking for a gas generator igniter and combustion chamber igniter, you can find them at Neospec.

 Click here to contact Neospec.

 View more: NEOSPEC Gas Generator Igniter and Combustion Chamber Igniter Manufacturer

[neospeckorea]

Combustion Chamber and Gas Generator Igniter Manufacturer in Korea | NEOSPEC

NEOSPEC is an exclusive combustion chamber and gas generator igniter manufacturer in Korea. It is producing the best igniter products for various industries. It has been continuously researching and developing since its inception in 2009 in various fields such as the defense industry, aerospace industry, and semiconductor industry. They manufacture the best products and are well-known for their quality.

NEOSPEC participated in the development of a Korean launch vehicle, developing products such as the combustor igniter, GGI igniter, and pyro valve, all of which are critical components of the propulsion engine. NEOSPEC has been successfully mass-produced, and it produces initiators and nozzles in the defense industry, as well as Dome in the semiconductor industry.

NEOSPEC Aerospace Parts

✓Pyro valve is a propulsion system unit for aerospace launch vehicles and military weapons that is used for opening or closing flow passage to normally supply propellant and pressurant so that the explosion in the valve can operate cylinders.

The Pyro valve, which is used to open and close flow passages, is powered by electronic energy in the form of small pulses and has the benefits of high reliability, small size, light weight, quick response time, and high hermeticity.

NEOSPEC supplies various items, including the products of NC (Normally Closed), NO (Normally Open), screw and weldable tube interfaces (1/4"~1"), etc. They also have a dual product that merged NC and NO into one.

✓Combustion Chamber Igniter is a part related to initial ignition of the launch of space launch vehicles that are connected to a dual pyro valve, cartridge at the front, and NC pyro valve at the rear. And the cartridge is equipped with two three-way ball valves for TEAL (triethylaluminium) charging.

The operation mechanism is comparably simple, highly reliable, and has a fast response time and high hermeticity that can be used at high pressure of 125 bar and low temperature (below -40℃) and is supplied in various sizes.

✓NEOSPECGas Generator Igniter:Mounted on space launch vehicles and missiles, it takes the role of igniting  gas generator that generates high-pressure gas to operate turbine of turbo pumps. The gas generator igniter is small-sized and highly reliable so it is applied in various ways like being used as an igniter for small-sized engines.

If you are looking for a combustion chamber and gas generator igniter manufacturer in Korea, you can find them at NEOSPEC. 

Click here to contact NEOSPEC. 

View more: NEOSPEC Combustion Chamber and Gas Generator Igniter Manufacturer in Korea

[neospeckorea]

High-Quality Semiconductor Domes Repair Service in Korea l NEOSPEC

NEOSPEC offers high-quality semiconductor domes repair service in Korea. They also make heater parts and high-precision medical device parts.

NEOSPEC has been continuously researching and developing in various fields such as the defense industry, aerospace industry, and semiconductor industry since its inception in 2009. They make the best products and are well known for their performance.

NEOSPEC participated in the development of a Korean launch vehicle and created products such as the combustor igniter, GGI igniter, and pyro valve, all of which are essential components of the propulsion engine. NEOSPEC has been mass-produced successfully, and it manufactures initiators and nozzles in the defense industry, as well as Dome in the semiconductor industry.

Their repair services were successful, and costs were significantly reduced through import substitution, and they excelled in every category. They use a variety of testing equipment to ensure product quality and dependability through environmental and operational performance tests. They provide optimal solutions that meet customer needs based on extensive development experience, optimal design, and precision machining technology.

NEOSPEC Semiconductor Parts/HDP-CVDDOME REPAIR

Domes for the HDP CVD process are made of ceramics, copper tubes, tube brackets, silicones, and other materials.

The copper tube has a high thermal conductivity, but due to chemical reactions with coolants that flow inside during the process, it collects precipitates and rusts, causing leaks and having a short life span compared to other parts and becoming the primary reason that the dome's replacement period is shortened.

NEOSPEC has 20 years of experience and technology for repairing domes of various products in the200~300mmrange.

If you are looking for a high-quality semiconductor domes repair service in Korea, you can find them at NEOSPEC. 

Click here to contact NEOSPEC. 

View more:

NEOSPEC High-Quality Semiconductor Domes Repair Service in Korea

[neospeckorea]

Combustion Chamber Igniter and Gas Generator Igniter | NEOSPEC

NEOSPEC has been continuously researching and developing since its inception in 2009 in various fields such as the defense industry, aerospace industry, and semiconductor industry. They manufacture the best products and are well-known for their quality.

Neospec participated in the development of a Korean launch vehicle, developing products such as the combustor igniter, GGI igniter, and pyro valve, all of which are critical components of the propulsion engine. Neospec has been successfully mass-produced, and it produces initiators and nozzles in the defense industry, as well as Dome in the semiconductor industry.

Neospec Combustion Chamber Igniter (7T/75T)

Combustion Chamber igniter is a part related to initial ignition of the launch of space launch vehicles that are connected to a dual pyro valve, cartridge at the front, and NC pyro valve at the rear. And the cartridge is equipped with two three-way ball valves for TEAL (triethylaluminium) charging.

The operation mechanism is comparably simple, highly reliable, and has a fast response time and high hermeticity that can be used at high pressure of 125 bar and low temperature (below -40℃) and is supplied in various sizes.

Neospec Gas Generator Igniter

Mounted on space launch vehicles and missiles, it takes the role of initing gas generator that generates high-pressure gas to operate turbine of turbo pumps. The gas generator igniter is small-sized and highly reliable so it is applied in various ways like being used as an igniter for small-sized engines.

Specifications of Combustion Chamber Igniter

Ø  Fluid Compatibility: TEAL (Triethylaluminium)

Ø  Size: 1/4", 1/2", other sizes available

Ø  MEOP: 23 MPa

Ø  Proof pressure: 23 MPa

Ø  Proof pressure: 1.1 x MEOP (25 MPa)

Ø  Op Temperature: 90 ~ 333 K

Ø  Leakage: < 1x10-6 scc/s (GHe)

Ø  Response Time: < 7ms (Mechanical) 

Gas Generator Igniter

Ø  Mass: < 0.5 kg

Ø  MEOP: 6 MPa

Ø  Body Proof pressure: 1.3 x MEOP (9 MPa)

Ø  Op Temperature: 233 ~ 333 K

Ø  Leakage: < 1x10-7 scc/s (GHe)

Ø  Response Time: < 7ms (Mechanical) 

If you are looking for a combustion chamber igniter and gas generator igniter, you can find them at Neospec. 

Click here to contact Neospec. 

View more: NEOSPEC Combustion Chamber Igniter and Gas Generator Igniter

[neospeckorea]

Propulsion system unit for aerospace launch vehicles and military weapons Pyro-valve Supplier l NEOSPEC

NEOSPEC has been continuously researching and developing in various fields such as the defense industry, aerospace industry, and semiconductor industry since its inception in 2009. They make the best products and are well known for their performance.

Neospec participated in the development of a Korean launch vehicle and created products such as the combustor igniter, GGI igniter, and pyro valve, all of which are essential components of the propulsion engine. Neospec has been mass-produced successfully, and it manufactures initiators and nozzles in the defense industry, as well as Dome in the semiconductor industry.

Their repair services were successful, and costs were significantly reduced through import substitution, and they excelled in every category. They use a variety of testing equipment to ensure product quality and dependability through environmental and operational performance tests. They provide optimal solutions that meet customer needs based on extensive development experience, optimal design, and precision machining technology.

Neospec Aerospace Parts Pyro-Valve

Pyro valve is a propulsion system unit for aerospace launch vehicles and military weapons that is used for opening or closing flow passage to normally supply propellant and pressurant so that the explosion in the valve can operate cylinders.

The Pyro valve, which is used to open and close flow passages, is powered by electronic energy in the form of small pulses and has the benefits of high reliability, small size, light weight, quick response time, and high hermeticity.

Neospec supplies various items, including the products of NC (Normally Closed), NO (Normally Open), screw and weldable tube interfaces (1/4"~1"), etc. They also have a dual product that merged NC and NO into one.

Specifications of Pyro-Valve

Ø  Fluid Compatibility: Helium, Nitrogen, Air

Ø  Size: 1/4“, 1/2“, 1“ N/C only, Other sizes available

Ø  Type: N/C & N/O, Single & Dual

Ø  MEOP: 23 MPa

Ø  Proof Pressure: 1.1 x MEOP (25 MPa)

Ø  Op Temperature: 90 ~ 333 K

Ø  Leakage: < 1x10-6 scc/s (GHe)

Ø  Response Time: < 7ms (Mechanical)

If you are looking for an aerospace parts pyro-valve, you can find them at Neospec. 

Click here to contact Neospec. 

View more: NEOSPEC Aerospace Parts Pyro-Valve