obd2eshop - Tumblr blog

[obd2eshop]

How does the key addition process work with both the Xhorse remote and the original one for VW Touran?

Problem: Yesterday I tried to add a key from xhorse on a VW Touran 2012. Clone ID 48 is successfully created and the car starts. When I add the remote, the vehicle pickup procedure succeeds, but when I add the xhorse remote, the original doesn't work, and when I add the original, the xhorse remote doesn't work. I removed all remotes, but the same thing, it only accepts one remote.   Experience for sharing: Add 2 remotes again, because almost all programmers delete the previously learned remote, so you need to relearn all remotes. Haven’t had any problem with these, good luck.

[obd2eshop]

Launch X-431 latest Smartlink B & C Software V1.0.4.6.10.52 will come soon. The main content of this software update is UI optimization. Please ensure the network is normal and pay attention to the software prompts. 1. Launch X-431 UI optimization: a) Removal of "WiFi/BT/USB" under the serial number b)"Enter remote diagnostic" button changed to "Remote Diagnostic Mode" Clicking this button

[obd2eshop]

2021 BMW Key Programming with Xhorse VVDI Key Tool Plus / Yanhua Mini ACDP

2021 BMW Key Programming with Xhorse VVDI Key Tool Plus / Yanhua Mini ACDP

Comment savoir si le programmeur de clé principale Xhorse VVDI Key Tool Plus  ou Yanhua Mini ACDP peut prendre en charge la programmation de la dernière BMW 2020-2021? La réponse est de vérifier votre châssis BMW.VVDI Key Tool Plus et Mini ACDP prennent en charge la programmation des clés pour BMW avec châssis F ou châssis E. C’est-à-dire qu’à part le châssis G, tous les autres châssis sont…

[obd2eshop]

How to use Xhorse VVDI Prog Read BMW E60 CAS2

How to use Xhorse VVDI Prog Read BMW E60 CAS2

VVDI Prog can read BMW EWS, CAS1-4. And here is one review about BMW E60 all key lost, the cas is like the following pic. Find related CAS type in VVDI Prog software. Check the connection diagram. Do wiring like the diagram. Read and save data. Then use other key programmer like VVDI2 to load the dump file which is read from vvdi prog. Add new key. Source:…

[obd2eshop]

(Solved!)XTOOL EZ400 PRO White Screen

(Solved!)XTOOL EZ400 PRO White Screen

Some customers gave feedback that XTOOL EZ400 PRO appeared white screen after update the car software and it couldn’t load normally. Do you have the same problem? How do you deal with it? For this issue, the suggestion gave by xtool.co.uk engineer is shown below. Step 1: Long-press the BMW software icon on the car menu, and click delete (just like you delete the APP on your smartphone) Step 2:…

[obd2eshop]

Xtool x100 pad2 add spare key for 2014 Ford Transit

Xtool x100 pad2 add spare key for 2014 Ford Transit

A customer lost one of his keys, and he wants to add a spare key with a usual key. The job is done by XTOOL X100 PAD2 key programmer. Now let’s start the procedure.First, connect x100 pad2 key programmer with the car properlyThen go to Immobilization-> FORD EU-> agree with the disclaimer-> Europe Ford-> Select by vehicle-> Immobiliser-> Transit Custom-> 2012-2017Next, select “Read number of…

[obd2eshop]

2013 Dodge Grand Caravan Key Fob Programming by XTOOL X100 PAD2 (Pro)

2013 Dodge Grand Caravan Key Fob Programming by XTOOL X100 PAD2 (Pro)

Used XTOOL X100 PAD2 to program new key on a 2013 Dodge Grand Caravan, it worked fine! Only need 2 mins! Main steps:Step 1: Read security codeStep 2: Program new keyThe procedure:Connect X100 PAD2 to the vehicle via main cableGo to immobilization-> CHRYSLERAgree with the disclaimerSelect Immobiliser/Fobik (WCM)-> Auto  Turn off the ignition switch and then turn onIt’s type 4.Then go to read…

[obd2eshop]

EEPROM Adapter With XTOOL X100 Pro2 Using Tips

EEPROM Adapter With XTOOL X100 Pro2 Using Tips

As we know, one of the main functions of XTOOL X100 Pro2 is that it can work with EEPROM Adapter to read pin code, initialize data and program EEPROM. But do you know how to use? Which vehicles are supported? Don’t worry! Read this post and find answers. X100 PRO2 key programmer full configuration comes with both EEPROM and EEPROM Adapter and other accessories. How to connect X100 Pro2, EEPROM…

[obd2eshop]

XTOOL X100 PAD2 Have Success in odometer correction for CHEVROLET

XTOOL X100 PAD2 Have Success in odometer correction for CHEVROLET

Question: Will Xtool X100 PAD2 change mileag for Malibu 2010-?A:Yes! Xtool X100 PAD2 is able to do mileage adjustment for Malibu 2010-?Today , Xtool.co.uk will show you how to use Xtool X100 PAD2 to change Malibu mileage (e.g2016 Chevrolet Malibu ) and XTOOL X100 PAD2/X100 PAD2 Pro car list of CHEVROLET mileage correctionAfter connecting XTOOL X100 PAD2 to the vehicle via the main cable.The…

[obd2eshop]

Fixed! Xtool Pad3 “Programming Failure” Problem

Fixed! Xtool Pad3 “Programming Failure” Problem

When your XTOOL key programmer such as X100 PAD appears “Programming failure” or other errors during testing, what do you do? Sometimes, though the car model you used is supported by the XTOOL scanner, it also failed. At this time, you should record the data and send to the XTOOL service, so that the engineer can check what the problem is and offer the related solution ASAP. Follow the guide…

[obd2eshop]

How to Reset BMW X3 F25 Battery with XTOOL PS90

How to Reset BMW X3 F25 Battery with XTOOL PS90

 XTOOL PS90 Diagnostic tool is able to do EPB reset, BMS reset, TPS, injector coding, Service Light Reset, etc for BMW.Today Xtool.co.uk will show you all how to reset the battery for BMW after replacement.Purpose: Register Battery replacementCar model: 2015 BMW X3 F25Device: Xtool PS90 Operation video:https://www.youtube.com/embed/nlI33rIil90Main steps:Step 1: Connect Xtool PS90 tablet with the…

[obd2eshop]

Xhorse VVDI2 to Program 2019 VW ATLAS MQB All Keys Lost

Xhorse VVDI2 to Program 2019 VW ATLAS MQB All Keys Lost

Hello guys, we have 2019 VW ATLAS MQB all keys lost to program using Xhorse VVDI2.We turn the ignition on first, plug VVDI2 to the OBDII port of the car. Open VVDI2 VAG V6.8.1 -> Engine – UDS -> Can1 and ASAM file for this unit-> Customer requests.Please input raw send data in the next editbox, and save a new folder as “019 VW ATLAS” on the desktop and then “Engine“. Back to select Gearbox…

[obd2eshop]

Top 3 2004 Mercedes SL500 OBD2 Scanner Test Report

Top 3 2004 Mercedes SL500 OBD2 Scanner Test Report

Topic : Foxwell nt510 elite , MB SD C4  or Autel MS906BT diagnostic tool ,which is the best for 2004 Mercedes SL500?

Car model and year: 2004 Mercedes SL500

Symptom: in a light front end collision, which I took on as a project for the significant other. One issue that I cannot seem to get a clear answer to is this Tele aid message at start up.

SL500 OBD2 Scanner recommendations and test…

[obd2eshop]

Solved NANO Toyota Techstream error "Unable to connect to VIM".

Solved NANO Toyota Techstream error “Unable to connect to VIM”.

Please be informed: when you install and use the WIFI Version VXDIAG VCX NANO for TOYOTA TIS Techstream, there are two points to pay attention to including:1. opening the Techstream software with patch; 2. connecting to VCI by WIFI). Once you do correctly by following the instruction, Nano Toyota Techstream will be working greatly.

Then, what problems will you encounter if you don’t use it…

[obd2eshop]

How to use Xtool KC501 chip key programmer

How to use Xtool KC501 chip key programmer

Xtool KC501 Key and Chip Programmer user manual below, incl:

About KC501  (Features and parameters) Read/Write the Chip (i.e Atmel AT24C01A, AT24C01A, Freescale’s MCU) Generate Key Others (read key frequency, identify key type)

  Part 1. About KC501

Xtool KC501 key programmer:

– Support registers, microcontrollers, key programming and other types of chips read/write, anticipate and other functions;

[obd2eshop]

What's your option on 2M2 Magic Tank key Cutter?

What’s your option on 2M2 Magic Tank key Cutter?

What’s your option on 2M2 Magic Tank key Cutter? If you do not have it, any other key cutting machine you own and what’s your option? Go on reading.

  I have it… and use it few times a day without any issues.

  I have it and love it. yes on the 2017 fords hu101

Hu162 I did not use on a car. I cut the key for fun. Looked like it cut fine thou

I do have tibbe adapter and it works awesome also.

[obd2eshop]

VXDIAG C6-DoIP repair for DTS Monaco / DTS enet cable

VXDIAG C6-DoIP repair for DTS Monaco / DTS enet cable

  I have seen a few people struggling with DoIP and Vxdiag C6. Please see the attached image of the interface settings for DoIP.

When using DoIP with Vxdiag make sure you uncheck/turn off the CAN

interface(MODULE_TYPE_ID_MTS6532) in DTS. Then connect the interface to the car and laptop, open vxmanager and turn on DoIP for BENZ. Then open DTS and with the project you require and you will see DoIP…