#xtool x100 pad2

[youobd88]

How to Get Xtool VAG Access Code for VAG 4th 5th IMMO & MQB AKL

With Xtool VAG Point Code, XTOOL X100 Pad2, X100 PAD2 Pro / X100 Pad3 will be granted for calculation access via OBD2 for VAG 4th & 5th immobilizer systems and MQB-platform, for all keys lost (AKL) key programming i.e golf 7 2013. NO EEPROM REQUIRED!

During this process,  internet connection is required, so that Xtool Pad is able to connect to VAG servers and perform calculation. After the calculation is done, your tablet will have unlimited access to that same vehicle.

After ordered from obd2tool.com, you will receive an email with your activation code. Keep this email handy, because you are supposed to enter the code at the time of programming.

Xtool VAG Point Code Operation Guide:

Tap ” the vehicle system”:

1). VW 4th Immobilizer System

2). Audi 5th Immobilizer System

3). Audi MQB Platform

Tap ” Online Mode”.

Receive a prompt “This password needs to be paid to get it, please contact your local dealer or Xtool. Just input your code.

Upon inputting a valid code, the calculation will start. It will take 30 seconds to 3 minutes.

If the calculation succeed, you will receive a message “Get data successfully!”

If your internet was interrupted during the online calculation, you will receive a error screen (shown as below). Don’t worry, your VAG Point Code is still available to use if the calculation fails. Just have the second try to start the calculation using the same code.

Upon getting a message “Get data successfully!”, you will be able to now add a key or perform all keys lost for VAG 4th / 5th IMMO & MQB immobilizer system.

Enjoy!

[sparkegg]

XTOOL X100 PAD2 Pro OBD2 Key Programmer User Feedbacks

As another representative professional OBD2 diagnostic scanner of Xtool Key Programmer, Xtool X100 Pad2 Pro is very cost-effective that can provide the most appropriate solutions for mechanic, staff of repair shops and car DIYers. With the same car list as Xtool X100 Pad3, it also equips with strong battery, large storage and fast running speed.

Moreover, It has innovative one-click oil reset function for extensive car models, 4 systems diagnosis, and provides professional key programming as well as supports special functions including oil service light reset, timing belt service light reset, tire pressure warning light reset, EPB reset, throttle body reset, DPF reset, battery reset, etc.

In the following content, let’s see the user feedbacks about this diagnostic scanner and try to know more about the practical needs or problems that customers care mostly about.

XTOOL X100 PAD2 Pro User Feedback 1:

Fast shipping got here in 6 days! Worked perfectly on my Audi A6 2011. Also no need to buy extra token or anything to programme my second car VW 4th and 5th gen keys.

XTOOL X100 PAD2 Pro User Feedback 2:

Have Received the Item.All is good and thank you! Got the great tool to change miles to KM at a Maserati Granturismo. Twan FYI, the Granturismo and Grancabrio have the same instruments as the Quartoporte.

XTOOL X100 PAD2 Pro User Feedback 3:

Great seller A+++++++++. Well worth the money. This Xtool pad2 pro worked very well and was very fast in Renault Megane 2.

XTOOL X100 PAD2 Pro User Feedback 4:

This pad2 pro tool covers European car market (ie: Ford eu, VW eu, opel EU, bmw eu etc), is indeed original product from XTOOL made for EU car brands

Have warehouse based in UK which is near my home. Quick service and good product.

XTOOL X100 PAD2 Pro User Feedback 5:

Very pleasant shopping experience, I have purchased obdstar x300 pro3 before, but until I got xtool x100 pad2 pro, I start to realize this tool is just amazing on the most basic diagnostic functions and also some advanced special functions. It could help me a lot more and save me much money from getting my car to the dealer shop for small problems any more.

XTOOL X100 PAD2 Pro User Feedback 6:

I am an auto technician and I use it almost everyday as far as your using it to access security systems , it is a beast however I do not recommend it as a regular code reader. It indeed is more suitable for those who want to make car keys or do the most basic everyday diagnostic check for your car. What’s more, it supports programming new keys in an all-key-lost situation.

XTOOL X100 PAD2 Pro User Feedback 7:

This PAD2 pro is such a wonderful tool to help me with the 2017 Jaguar XE for mileage correction. Also well-packed and fast delivery service, very nice customer service.

XTOOL X100 PAD2 Pro User Feedback 8:

I could only say, this tool works perfectly well on my programming the FOB for a Mitsubishi Outlander GT 2016, but only support the manufacturing year before 2016. A little disappointed, but never mind, it equips with high-quality hardware and accurate diagnostics.

www.xtool.co.uk

[luseyzhang-blog]

US$678 - XTOOL X100 X-100 PAD2 Special Functions Expert Update Version of X100 PAD 1.Key Programming 2.4 systems diagnosis 3.Oil Reset/Engine oil light reset 4.Odometer Adjustment 5.Tire Pressure Warning Light Reset 6.Timing belt light reset (Manual Operation) 7.EPB Electrical Parking Brake Adaptation   8.TPS Throttle Body Adaptation 9.Steering Angle Calibration 10.Battery Reset 11.DPF 12.PIN Code Reading 13.Hexadcimal editor(Win Hex) 14.OBDII Diagnosis 15.Support the latest vehicles with CAN BUS and UDS protocol 16.Update Via WIFI (always equip your device with the latest software)

[obd2eshop]

2013 Dodge Grand Caravan Key Fob Programming by XTOOL X100 PAD2 (Pro)

2013 Dodge Grand Caravan Key Fob Programming by XTOOL X100 PAD2 (Pro)

Used XTOOL X100 PAD2 to program new key on a 2013 Dodge Grand Caravan, it worked fine! Only need 2 mins! Main steps:Step 1: Read security codeStep 2: Program new keyThe procedure:Connect X100 PAD2 to the vehicle via main cableGo to immobilization-> CHRYSLERAgree with the disclaimerSelect Immobiliser/Fobik (WCM)-> Auto  Turn off the ignition switch and then turn onIt’s type 4.Then go to read…

[obdiishop]

Porsche cayenne Mileage Adjustment With XTOOL X100 PRO2 By OBDII

We’re gonna show you how to reset and change odometer mileage the Porsche cayenne 2010- with XTOOL X100 Pro2 via OBD2 port. Incl:

Part1:how to change mileage from 105657 MI to 12050 MI part2:how to recovery mileage part3: Xtool x100 pro2 Porsche odometer correction car list

Part1:how to change mileage from 105657 MI to 12050 MI Current mileage:105657

1.First of all, connect the x-tool x100 pro2 to the vehicle throught main cable,and turn Audio off

2.Into the function menu and select your car:

“Dashborad”->”Europe Vxxxx”->”PORSCHE”->”Caynne”->”2010-”

3.Select”Backup and mileage”->”mile”-> “New File”

NOTE:Why should “Backup and mileage “?

A: if you make a mistake you can revert back to your original file

4.After new file save ,then pls input the mileage of the adjustment, here we wanted change mileage to “120500” MI

5.It only takes 30 seconds,adjustment complete!we can see the new mileage is 120457 in the dashboard,it’s in the margin of error, that fine.

part2:how to recovery mileage

Turn turn Audio off first, and back to the your vehicle

Select”Recovery”, then press”OK” again and again

Mileage recovery to 105657 MI successfully!

part3: Xtool x100 pro2 Porsche odometer correction car list

PORSCHE 911 2001.08-2010 918 201 996 2001.08-2005 997 2005-2010 Boxster 2001.08-2010 Cayenne -2009 2010- Cayman 2005-2010 Panamera 2010-

X-100 PRO2 tool all will do mileage correction for Audi Buick Cadillac Chrysler Fiat Ford GMC Hummer Hyundai Kia Infiniti Jaguar Land Rover Mitsubishi Nissan Seat Skoda VW Pontiac Mercedes Ferrari Volvo Mazda

[automotiveworkshop-blog]

XTOOL X100 Pro2 Programmer Frequency Question Answer

This blog here sum up the latest XTOOL X100 Pro2 key programmer customer care question and tell you how to solve it. Question: Will X100 Pro2 program a remote key fob for 2005 Buick lesabre? Answer: yes, it will support 2005 Buick on key program. XTOOL X100 PAD2 Question: Will this program keys for the 99 Sebring convertible? Answer: might need to find others to calculate the pin code to program keys. Question: Can this program new key when all keys lost for 2001 mr2 spyder toyota? Answer: not support 2001 Toyota. Question: Will this work to program keys for a 2005 dodge Dakota Answer: YES. Question: Can it adjust mileage of eclipse 2009 and ford figo 2012? Answer: not support eclipse 2009 and ford figo 2012 for mileage. can work for 2016-2018 figo. Question: I need to program new chip key 2009 Nissan Sentra. I have 1 master key. will this device read pin code from car or do I need a different device? Answer: the car can do add a key by key programmer. Question: Will X100 Pro2 program key for 2008 land rover lr2? Answer: yes, it supports 2005 -2013 year. Question: Will this reprogram the vin and program keys on a 2012 acura mdx? Answer: NO. Question: Will this program a key fob and transmitter for 2012 Nissan Rogue Answer: YES, will program keys for 2012 Nissan Rogue. Question: Will this support a 04 Chry Pacifica? Answer: YES. Question: Will this work on a 98 lincoln mark viii? Answer:  no,it won’t do 1998 lincoln. Question: Will X100 Pro2 auto key programmer work on a cadillac cts 2008 and 2014 for key programming? Answer: NO. Question: Will it program a new key for 2008 land rover range rover sport? Answer: YES. Question: Key program on 07 f150? Answer: yes, it can do key immo on this car. Question: Will Pro2 do a 350z 2004 immobilizer and key Answer: yes, it will do immobilizer and key on this car. Question: Does this work with 2009 Suzuki grand Vitara sz 2009 5-door manual traction? Answer: can’t do Suzuki grand. and can not do manual traction. the main function of this product is key programmer. it will support Vitara’s key programming. Question: Will it work to program a key for 2010 land rover lr4? Answer: yes, it supports Landrover around 2012 years. Question: Will this correction mileage 2012 Nissan Navara d/c 2.5d 4wd rx mt? Answer: not support any Japanese car for mileage. thanks Question: Will X100 Pro2 work on 2012 Maserati Granturismo key programming Answer: no, it can not do this 2012 Maserati. http://www.obd360.com/wholesale/xtool-x-100-pad-2-special-functions-expert.html

[mrcutfish]

XTOOL X100 Pad2 Read Peugeot 206 BSI Pin Code Test Report

This post will share you with the process on how XTOOL X100 Pad2 Pro read Peugeot 206 BSI pin code. Use Tools: Xtool X100 Pad2 Xtool EEPROM adapter Connect X100 Pad2, eeprom adapter and bsi 95160 CPU chip Select Read Pin Code Select EEPROM adapter Make sure the eeprom adapter is connected and powered on, the status indicator turns on   select car brand: Peugeot->206->BSI 95160 select V1 or V2 If have communication failed error, select another option or try again Save data   Successfully read Peugeot 206 BSI pin code by XTOOL X100 Pad2! Article from XTOOL JLR Key Programmer

[cassieautoobdii]

XTOOL X100 PAD2 Pro with KC100 Programmer Full Configuration Support VW 4th & 5th IMMO & Special Functions

#xtool #xtoolx100pad2 #xtoolx100pad2pro #xtoolx100 #xtoolx100pad2prokc100 #kc100 #autokeyprogrammer #carkeyprogrammer

whatsapp:+8615886576826

[myemilyzhang]

2011 Hyundai ix35 Program Remote Xtoo X100 Pad2 done!

Will go on Hyundai ix35 2011 remote programming today…

Have got pin codes…upload images:

Hyundai ix35 2011 Pincode

Now, start program a remote….

Using Xtool X100 PAD2

Program remote

Select from type

Immobilizer

Type 4 (CAN)

Program keys

Insert a key to be programmed

Turn ignition on

Input security codes

It’s done with vvdi key tool

Programmed a remote successfully

Yes to program a second one

Turn ignition off and wait for 10s

Then turn ignition on and press OK to continue

Test the new remotes on the vehicle

Worked!

[sparkegg]

XTOOL X100 PAD2 Pro LEXUS Key Programming Function Overview

As another representative professional OBD2 diagnostic scanner of Xtool Key Programmer, Xtool X100 Pad2 Pro is very cost-effective that can provide the most appropriate solutions for mechanic, staff of repair shops and car DIYers. Sharing the same car list with Xtool X100 Pad3, it also equips with strong battery, large storage and fast running speed.

Moreover, It has innovative one-click oil reset function for extensive car models, 4 systems diagnosis, and provides professional key programming as well as supports special functions including oil service light reset, timing belt service light reset, tire pressure warning light reset, EPB reset, throttle body reset, DPF reset, battery reset, etc.

It still has large influence on vehicle diagnosis tool by virtue of competitive advantage among similar products in and beyond Xtool band.

The following part will tell you guys the latest immobilizer software version’s detailed information. Let’s check together what function change has the newest version come out when using X100 Pad2 Pro to program Car keys for LEXUS car band.

Remote

Type 1

Type 2

Type 3

Immobiliser

Type 1(“4C”)

1997–2003

Type 2(“4D” 67/68)

2004–2015

Type 3(“4D” 66/70/72 “G”)

2011–2015

Type 4(“8A/8E””H”)

2015-

Type 5(Avanza)

Type 6

Type 7(Toyota 86)

Smart key system

prox 1

prox 2

prox 3

prox 4

-2016

2017

prox 5(With slot)

More product details, please feel free to check the website of xtool.co.uk.

[autoboss1]

What if the car remote key doesn't work? XTOOL X100 PAD2 Pro Car OBD2 Key Programmer helps you solve this problem!

🔥X100 PAD2 Pro is a wonderful tablet key programmer! It not only provides customers with professional key programming, but also the most needed special functions for workshops. X100 PAD2 is a tablet with the latest technologies to perform key programming, mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset, EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration, and OBD-II engine diagnosis, and is specially added with VW 4th & 5th IMMO. 🎉

[carecmmaster]

Learn ECM Repairing Course From CAR ECM MASTER And Become A Professional.

Today's online courses can help you polish and develop yourself as an expert in the area if you're having problems repairing ECMs as a Car Mechanic or want to strengthen your mechanical skill set in the field of ECM Repairing.

What is an ECM Module? 

The ECM, in layman's terms, is a collection of electronic components that control a variety of features of the vehicle. ECUs use multiple components, such as connectors and a circuit board, and are susceptible to flaws and malfunctions. Instead of buying a new ECM, you can have one repaired using an online auto ECM repair course.

All of a car's electronic operations are controlled by ECMs. Everything from fuel injection to maintaining a pleasant interior temperature to suspension and ABS braking control may be included. Some cars have multiple ECUs that control various features, while others only have one that controls almost everything. ECM is a sort of electronic component that is widely used (Engine Control Module). Because of its sensors and software, the ECM is also the most advanced part of a vehicle. As a result, the ECM repair will require the services of a specialist.

A Quick Overview of Car ECM Repairing Courses

There are currently a plenty of online automobile ECM fixing courses available in India. You must enrol in an online programme that thoroughly teaches you in all of the important engineering or repairing principles and techniques that top engineers employ while developing and repairing ECMs. You'll need to conduct some research and read reviews to find reputable online courses on ECM repair.

After taking these online Car ECM/ECU Repairing courses, you'll be able to understand the current mending strategies for every ECM component in cars, including as sensors, fuses, software, and hardware. Sensor, Fuse, Relay, Software, K-tag, KTM Bench, BDM, FG-Tech, KTM 100, UPA Programmer, Smart Can Solution, ECM Components, Hardware, Car Diagnose, Xtool Pad1, Xtool Pad2, X100D, X100 Super, Launch, PS70 Pro, Humzor, and other topics will also be covered.

Why Enroll in these Courses?

●There are no physical education classes available. These ECM repairing classes are available to students from all over the world. All you have to do is enrol, and you'll be given access to all study resources and help available online.

● These days, online courses are more cheap than traditional classroom courses. Nowadays, no one can afford those high-priced physical education courses. They also have to pay for their housing, food, and a variety of other expenses. If you go around the market, the cost of these courses can reach a million dollars or more, but some organisations offer them at a low rate. So go out and locate them and use them to your advantage.

● When you enrol in such courses, you may have questions or concerns because they are quite thorough and need a high level of skill. The course providers provide full support even after the course is completed since they want to help students master ECM repair and have a good future in the automotive repair industry.

● To choose the finest ECU/ECM repairing course provider, you must conduct thorough research and identify the best organisations or ECU/ECM repairing course providers.

Reach out to Car ECM Masters if you are looking for Online Car ECM/ECU repairing courses.

[automotiveworkshop-blog]

Xtool X100 PAD2 Battery Drain and Power off problem

Recently,some OBD360 customers feedback  that they have purchased the Xtool x100 pad2 tablet key programmer on our site. But they met a battery problem. For example, One customer left it fully charged and 1 day later, when he tried to use it and it was dead.Also he noticed that the battery drains very quickly while in use, from 100% to 70% in about 15mins. They dont know how to solve this problem, and ask us for help. After feedback problem to Xtool factory, we have got final Solution from Xtooltech engineer to solve this X100 PAD2 Battery Drain and Power off problem: Tools required: 1pc* Static bracelet 1pc* Hot air gun  (350±10℃ Temperature setup: 350±10℃) Precautions: Please wear the static bracelet before each operation. Procedure 1:  Change C6 capacitor Position: C6 Name: Chip capacitor Chip specification: 4.7UF/10V  0603 1.Disassemble the C6 capacitor and desolder a 4.7K 0603 resistor Procedure 2: Remove transistor Position: Q14 Name: S8050 Chip specification:  0.1uF/50V 0402 1.Disassemble the Q14 transistor. Procedure 3: Change C123 capacitor Position: C123 Name: Chip capacitors Chip specification:  0.1uF/50V 0402 1.Replace the C123 capacitor with a 3.3K%5  0402 resistor. More products about XTOOL,check here: http://www.obd360.com/wholesale/original-xtool-diagnostics/

[mrcutfish]

How to Solve XTOOL X100 Pad2 Data Load Fail

One

XTOOL X100 PAD2

users turned to us that when he tried to tap the car models of

X100 PAD2

, the error will appear with the note that “fail to load data”. The version of his xtool x100 pad2 app is V3.1.5.

The error shows as below:

Solution：

Reset XTOOL X100 Pad2 to factory settings (the reset button is in the setting)

delete the file call “XTOOL”in the nand flash

pas

Reinstall the XTOOL X100 Pad2 app

Here is the download link of XTOOL X100 Pad2 V3.1.5:

https://mega.nz/#!VKAEHDDD!jejp460R0AANnr_S__q7cFIazW1pIQ_Ja_PNcOSmyRM

XTOOL

Article from:

How to Deal with XTOOL X100 Pad2 Fail to Load Data

[obd2eshop]

XTOOL X100 PAD2 Have Success in odometer correction for CHEVROLET

XTOOL X100 PAD2 Have Success in odometer correction for CHEVROLET

Question: Will Xtool X100 PAD2 change mileag for Malibu 2010-?A:Yes! Xtool X100 PAD2 is able to do mileage adjustment for Malibu 2010-?Today , Xtool.co.uk will show you how to use Xtool X100 PAD2 to change Malibu mileage (e.g2016 Chevrolet Malibu ) and XTOOL X100 PAD2/X100 PAD2 Pro car list of CHEVROLET mileage correctionAfter connecting XTOOL X100 PAD2 to the vehicle via the main cable.The…

[obd2serve]

#XTOOL #X100 #Pad2 Pro, Xtool X100 #Pad3, #KC501 Car Key Programmer, KS-1 TOYOTA Smart Key Simulator Ship Out

Skype :obd2serve@gmail.com Whatsapp :+86 13691674080

Wechat : +86 13691674080