pumpsorvalves-blog

[pumpsorvalves-blog]

VERTICAL SUMP PUMPS

VERTICAL SUMP PUMPS

THE COMPLETE SOLUTION FOR DEWATERING SUMP Vertical Sump Pumps are usually intended for use in the industrial process pumping applications to pump, clean or lightly contaminated liquids, fibrous slurries and liquids containing large solids from the deep sumps with satisfactory efficiency. The pumping head is suspended into the pumped liquids and the drive motor is dry installed on the top of the Pump. The pump has separate discharge pipe and support pipe column. The Vertical Sump Pump has a vertical line shaft with slide bearings. Our Pump offers high as well as smooth functionality, consistently in an energy efficient manner. The design can sustain in the harsh working environment for a good life span. They are easy to install, compact as in weight despite of the fact they are very robust. Because Every products are being checked thoroughly. Their maintenance is also easy and not much expensive. Our Pump quality is being tested thoroughly under diverse parameters before they are offered to our valued customers. FEATURES # Bearing free design for handling abrasives in solutions. # Motors are flange mounted single or three phase TEFC. # Epoxy / Polyurethane paints are used on metallic parts. # Radial vanes on backside of impeller increases flow # Fluids through the sleeve bearing preventing overflow at top of column. # Lubrication of bearings by product itself or by fresh water. # Operates at 1450 rpm / 2900 rpm (Custom available ) # Specially designed vapor seal provided. # Dynamically balanced impeller APPLICATIONS # Pollution Control # Filtration # Transferring Corrosive Chemicals # Various Slurries # Bio Gas Projects # Waste Water Treatment Plants # Phosphoric Acid Plant H, PO, H2SIFS, H2SO4, HF And Various Mixtures # Acidic Water Handling # MS Vertical Sump Pump can Transfer 98% Olum, Cloto Nephta ADVANTAGES # No mechanical seal or stuffing box required # Construction withstand corrosion & erosion # No foot valve required to lift from negative suction # No leakages problem just like gland or mechanical seal # Normal maintenance # Easy alignment

MOC # CASING : CAST IRON,PP,UHMWP,SS-304-316 ETC. # IMPELLER : EN-8/SS-304/316 WITH SPECIAL COATING . # PIPE : MS/SS/PP. # SUPPORTING BEARING : SS/BRONZE/PTFE. # BEARING HOUSING :CAST IRON . MOC Also available as per customer requirement TECHNICAL High Temperature Services : Max. working temperature is 110 C / 200 C. Length : Sump Pumps lengths available from 1’ to 12’ with flow rate up to 50m3/h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made . Models : Available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) also available. Read the full article