royalplbg

[royalplbg]

$99 Drain & Sewer Line Cleaning

Got a clog? We have a special for that!  We make it easy to get your drains unclogged and checked for issues that may be causing the stoppage.

$99 Drain & Sewer Line Cleaning

Residential drain cleaning only. Not valid for commercial and construction customers. Clogged drain must be clean out accessible from the exterior of the home. Service area within a 30 mile radius. Cannot be combined with any other offers or coupons.

  Drains that work!

  The post $99 Drain & Sewer Line Cleaning appeared first on Royal Plumbing.

from Royal Plumbing https://royalplbg.com/99-drain-sewer-line-cleaning/

[royalplbg]

Drain Cleaning Offer

Drain Cleaning Offer!  We will come to your home and clean out your stopped up drains!   90% of the time all the drain needs is a good clean out.  About 10% of the time there is an underlying issue, if this happens, we will diagnose the issue and give you a quote to fix the problem.

clogged drain must have a code approved clean out visibly accessible

residential only

limit one per household

The post Drain Cleaning Offer appeared first on Royal Plumbing.

from Royal Plumbing https://royalplbg.com/drain-cleaning-offer/

[royalplbg]

Seniors 60+ 10% Off!

Senior Citizens 60+ get a 10% discount! Thank You!

Valid id maybe required, cannot combined with any other offers.

The post Seniors 60+ 10% Off! appeared first on Royal Plumbing.

from Royal Plumbing https://royalplbg.com/seniors-60-10-off/

[royalplbg]

Military 10% Off!

Military personal 10% off!  Thank You! 

Valid id maybe required, cannot combined with any other offers.

The post Military 10% Off! appeared first on Royal Plumbing.

from Royal Plumbing https://royalplbg.com/military-10-off/

[royalplbg]

First Responders 10% Off

10% OFF for first responders including police, fire, & ambulance!  Thank You!

Valid id maybe required, cannot combined with any other offers.

The post First Responders 10% Off appeared first on Royal Plumbing.

from Royal Plumbing https://royalplbg.com/first-responders-10-off/

[royalplbg]

Funky Hot Water Smell? 5 Signs Your Water Heater Needs to Be Checked By a Professional

Have you noticed that something is off with the water in your house? Did it start slowly, almost intermittently at first? Perhaps some sputtering occurred every now and then when first turning on the tap, almost as if water had gotten trapped inside your pipes. Maybe everything is fine as long as you use cold… from Royal Plumbing http://royalplbg.com/2017/08/13/funky-hot-water-smell-5-signs-your-water-heater-needs-to-be-checked-by-a-professional/

[royalplbg]

How Does Your Dishwasher Works In Your Home

The Answers On How Does Our Dishwasher Works And Helped Us

Luckily we now have an invention that does the majority of our kitchen chores. How did we ever manage before the dishwasher. If you are hosting a dinner party or celebrating a special occasion with friends and family, you are usually left with piles of washing up. Thanks to the dishwasher this is one headache that you can do without.

Have you ever wondered how your dishwasher actually works? Read more below:

How Does Your Dishwasher Really Work?

If you have a dishwasher in your home, you may take it for granted. You may just load your dishes into it and turn it on and never wonder how it works or what you would do to keep it running well. But there are a lot of things to remember when you are using a dishwasher. So here we are going to tell you how a dishwasher works and what you can do to make sure yours is working well.

First let’s look at what dishwashers do:

·        Adds water

·        Heats up water until it’s the right temperature

·        Opens up your detergent dispenser automatically when the time is right

·        Shoots water through its jets so that the dishes are clean

·        Drains out dirty water

·        Sprays additional water onto dishes so that they are rinsed

·        Drains again

·        Heats up air so that the dishes are dried, if you have chosen that setting.

Additionally dishwashers are always monitoring themselves so that everything’s properly running.  There’s a timer that regulates how long each cycle runs. There’s also a sensor which detects the temperature of the air and water so that the dishwasher doesn’t overheat or damage the dishes.  There’s another sensor which is able to tell if the level of the water has gotten too high and then if it does, it drains the dishwasher so that ti doesn’t overflow. Some of the dishwashers also come with sensors that detects the water’s dirtiness which is flowing off of your dishes. When the water’s clear, it knows your dishes have been cleaned.

Inside your dishwasher

Even though they’re watertight, dishwashers aren’t actually filling up with water. There’s a little basin in its bottom which is what fills up. There’s heating elements which heat up the water from between 130 – 140 degrees F. Then there is a pump which sends water up to its water jets, and these force the water out and spray it against your dirty dishes. It’s kind of like how a garden hose works but it doesn’t have a nozzle, when you are placing a thumb over the hose’s end and decreasing the amount of space that the water has to come out.  This way it’s more forceful. The jets of the dishwasher use this same principle. The water’s force also rotates the arms that are holding the dishwasher’s spray jets, similar to how lawn sprinklers work.

When it’s done with the wash and rinse cycles, the water goes down into its basin once again, where its pump sends water from the dishwasher. Based on the dishwasher type, the water might go right into your sink’s pipes or it could come to your sink using a hose.

There is one last step in washing the dishes and this is completely optional and this is your dishwasher’s dry cycle. There’s a heating element at your dishwasher’s bottom which heats up the interior air to help dry your dishes. But sometimes people will allow them to dry on their own without using heat since it will save energy.

Dishwashers really aren’t mechanically complex. Next we are going to look at the different main components of basic dishwashers.

A dishwasher’s main parts are:

Control mechanism

This is found inside its door behind the dishwasher’s control panel. A lot of units use an electro-mechanical system that is simple – the timer determines the length of time each cycle part lasts and then activates the right function accordingly. These are things like its detergent dispenser, spray, and the draining function. Units which are more costly may have a control system that is computerized. The units that are more modern also have door latches which have to be closed so that they run and some also have locks for child safety.

Intake valve

The intake valve’s where the water from your home’s supply comes into the dishwasher. The pump in the unit doesn’t pump water into its basin – once this valve is open, the pressure of the water makes the water go into your unit.

Pump

The pump’s powered by an electric motor. During the pump, it forces the water into the arms of the sprayers. While its draining, it directs water into the hose. The assembly’s mounted under the basin. This is in the dishwasher’s center. There’s two kinds of pump:

·         Reversible – The reversible pumps go between sending the water to spray arms to sending water to the drain and it’s done by reversing the motor’s direction. They are generally mounted vertically.

·         Direct-drive – In the direct drive, its motor runs in a single direction, That means that the flow’s direction is changed from the spray arms to the drain through a solenoid which closes and opens the right valve or changes one of the hose connections to another. These types of pumps usually are mounted horizontally.

A dishwasher can be either permanent or portable. The portable units come with finished sides along with a top that you can use as another counter. When they’re not being used, they sit next to a wall. When you have dishes to was, it can be rolled using casters to your sink where it will connect to your faucet and plug into an outlet. In permanent installations, it goes under your countertop and gets bolted into place. Hoses beneath the sink connect directly to your line that controls hot water and your drain line. The unit generally plugs in beneath the sink too. Both kinds of installation will need a grounded line of 120 volts.

Here are some tips for using a dishwasher

·         Do not use regular soap as if you were washing dishes by hand, otherwise your dishwasher will overflow.

·         Don’t put too much into your dishwasher. There needs to be room for your water jets to spray your dishes.

·         Face your dishes’ dirtiest part towards the sprays, and they usually will come from the dishwasher’s center.

·         Don’t mix silver and steel items. When you p0ut two different metal types in an environment that is humid, it can cause corrosion.

·         Try keeping spoons, bowls, and other kinds of dishes that have identical shapes separate. If you don’t, they’re going to nest with each other and therefore the water won’t clean them properly.

·         Don’t put fine china, crystal, wood, hand-painted, or cast iron items into your dishwasher. These items should be washed by hand.

·         Use your dishwasher when you have really good water pressure, often when it’s night time. You are going to get better results if you aren’t using lots of water for other things, like laundry or showering.

·         If you have a problem with hard water, use a bit more detergent.

·         Use rinse aids for avoiding spots and helping the dishes dry faster.

·         Don’t place your plastics on your dishwasher’s bottom rack, particularly if you’re using the hot drying feature. Your plastics might melt.

·         Don’t pre-clean your dishes. Your dishwasher depends on the food bits clinging to your dirty dishes so that they can maintain the right pH level in the unit. But you should scrape the large pieces off.

A dishwasher can save you a lot of time. Just take good care of it and it will last for years.

Your dishwasher is made up of different elements which correspond together to give you gleaming results.

The earliest incarnations of a dishwasher functioned by using a hand held device. This was composed by a dish rack fixed onto a support with a washbasin full of water underneath. Understandably, this was not a very effective or efficient way of washing dishes. But if you have any problem with your plumbing system that your dishwasher we’re connected to run the water, you can call us at (361) 991-1002 to fix your water problem.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/

from Royal Plumbing http://royalplbg.com/2017/01/25/how-does-your-dishwasher-works-in-your-home/

[royalplbg]

Anode Rod Help To Keep Water Heater Rust Free

Have You Notice Why Your Water Heater In Corpus Christi Homes Is Rust Free?

Water heaters can rust, and when that happens it is usually a sign that the system is too old to continue to do its job and should receive a replacement. But if a water heater is professionally maintained and receives repairs whenever needed, it shouldn’t suffer from any type of corrosion until it is advanced in years.

How does a storage water heater—which is, after all, a metal appliance in contact with water—avoid the ravages of rust? It is mostly thanks to a component called the anode rod.

How the Anode Rod Keeps Your Water Heater Rust Free

Have you ever wondered why your water heater doesn’t rust into oblivion a couple years after being installed? That may seem like an odd question, but consider that any system dealing with large amounts of water is vulnerable to rust over time. A water heater is exposed to water constantly, from the time it is installed onward. So, how does it keep operating without the tank rusting out and rupturing? The answer is a part called the anode rod. Let’s take a look at what the anode rod is, and why you should have yours checked at least once a year.

The Anode Rod

The anode rod is a long metal rod, usually composed of aluminum or magnesium formed around a steel wire. The rod is inserted into the water heater storage tank, and slowly degrades as long as it’s in contact with the water. The anode rod degrades because it attracts the ions that normally cause rust in the water heater tank lining. As long as the anode rod is degrading, the water heater tank will be protected from rust.

Checking the Anode Rod

Though the protection the anode rod offers is quite effective, it won’t last forever. Eventually, the anode rod will degrade to the point where it can no longer attract ions properly. At that point, it will need to be replaced to maintain the protection. Anode rods tend to last around a year before needing replacement. Much of the time, the rod is checked and replaced during annual water heater maintenance. This is yet another reason why it’s so important to get your water heater checked at least once a year.

Rely on Royal professional water heater maintenance.

To keep a close watch on the anode rod so you know when it needs replacement, you need to inspect your water heater regularly to avoid any problems. Schedule a service to Royal Plumbing at (361) 991-1002 at least once a year, and you should have a water heater that remains rust-free for most of its long service life.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/water-heater-installation-repair/

from Royal Plumbing http://royalplbg.com/2017/01/20/anode-rod-help-to-keep-water-heater-rust-free/

[royalplbg]

Types Of Corrosion That You Need To Aware

Corpus Christi Homeowners Should Know The Types Of Corrosion On Their Pipes And How They Can Affect

As you’re probably already aware, the pipes in your home are largely made of copper. That is, as long as you have a home younger than 50 years or so. Copper pipes are used because of their resistance to things like oxidization. They can last quite a long time, if properly cared for.

However, there is one thing that they are particularly vulnerable to: formicary corrosion. Read on to find out more about how this affects not only your plumbing, but possibly your air conditioning as well.

Corrosion Types That Can Affect Your Plumbing

Most of the plumbing pipes in homes today are made of copper. There are a number of reasons why that’s the case. Mainly, it’s because copper is highly resistant to rust and lasts many decades under the right condition. Though it’s quite resilient, however, copper can still be affected by a wide range of different conditions. Let’s take a look at the various kinds of corrosion that can affect your copper pipes.

Formicary Corrosion

Formicary corrosion is caused by formaldehyde particles in the air and soil. Formaldehyde eats microscopic holes through the copper pipe, in a pattern that looks almost like an anthill if you look at it under a microscope. Hence the name “formicary.” Though it’s impossible to see with the naked eye, formicary corrosion still has a substantially negative effect on the copper. Leaks will happen much more frequently in copper pipes with advanced formicary corrosion, and their overall lifespans will be shortened. There isn’t much you can do about formicary corrosion, since it’s caused by microscopic particles in your home. You can have you pipes inspected annually, just to make sure it’s caught early, though.

Pitted Corrosion

Pitted corrosion is caused by chlorine particles present in the general vicinity of the pipe. Unlike formicary corrosion, pitted corrosion causes rapid degradation focused on a small area of the pipe. This opens a small leak in the pipe, called a pinhole leak. Pinhole leaks are small enough to only release a couple of drops at a time. They don’t give off any warning symptoms, and may seem harmless. However, on a long enough timeline even a pinhole leak can rot out the entire area with water damage. The best way to protect against pitted corrosion is to have your pipes inspected at least once every year.

Dis you notice a type of corrosion in your plumbing pipes?

It’s important that you be aware of these corrosion types, so that you can protect your plumbing system from them. Though copper doesn’t rust in the traditional fashion, it is still susceptible to a number of different corrosion types. If you suspect a corrosion in your pipes don’t hesitate to call Royal Plumbing at (361) 991-1002 and have our expert to check it for you.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/

from Royal Plumbing http://royalplbg.com/2017/01/24/types-of-corrosion-that-you-need-to-aware/

[royalplbg]

How To Loosen A Stuck Plumbing Valves

Ways On How To Loosen Your Corpus Christi Plumbing Shutoff Valve

Water shut-off valves tend to accumulate mineral residue and freeze. Of course, you won’t find out until you need to shut off the valve to make a repair on a pipe line, sink or showertub. Not knowing how to free stuck plumbing valves, though, can lead to broken valves, pipes and fixtures, leading to more expensive repairs.

Following a few steps, however, you may be able to get the stuck valve back in working order and finish your plumbing repair job.

How to Free Stuck Plumbing Valves

Plumbing valves range from the outdoor spigots that are used for watering lawns or washing cars, main water supply valves in your home that control the water flow throughout your house and individual valves that control water flow into sinks, toilets, washing machines and washtubs. These valves do not get used much because once they are turned on, they are generally left on. During emergencies such as a broken water pipe, however, it is absolutely essential that the water valve that supplies that particular plumbing fixture can be turned on and off reliably.

1

Turn off the water supplying the valve you’re working on. This may require you to turn off the entire home’s supply.

2

Drip penetrating oil down the shaft of the valve and allow it to soak in. Tap the body lightly with a hammer to aid in the oil’s distribution around the valve. Turn the valve with your hand after several taps. If the valve begins to loosen, add more oil, tap the body and continuing turning the valve until it fully opens.

3

Heat up the valve body with a hair dryer. Sometimes grime or gunk will solidify around the valve and act like an adhesive. Heating the valve body up will melt the gunk enough so that you can begin turning the valve. Once the valve turns, turn it back and forth to wash away the gunk that was inhibiting the valve from rotating.

4

Loosen the packing nut, or bonnet nut, with an adjustable wrench. This nut is directly beneath the handle, and the valve stem runs directly through it. Once the nut has been loosened, begin to turn the valve back and forth to free it up. Add penetrating oil if the valve still does not move.

Things You Will Need

Penetrating oil

Adjustable wrench

Small hammer

Hair dryer

Tip

Turn the water on and check for leaking around the valve once it is freed up. Many times the packing nut will leak after the valve has been freed. Attach an adjustable wrench to the nut and give it a quarter turn. This will reseat the packing material and make a waterproof seal once again.

Don’t fancy doing this project yourself? We can work with it.

If you are in any doubt about this operation or tips above you can always call Royal Plumbing at (361) 991-1002 to schedule a service, it may be that the shutoff valve has simply come to the end of its useful life and extending this could damage the rest of the plumbing system so you will need to get it checked out just to be certain.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/emergency-plumber/

from Royal Plumbing http://royalplbg.com/2017/01/19/how-to-loosen-a-stuck-plumbing-valves/

[royalplbg]

How Much To Pay For A Garbage Disposal Problem

What Should It Cost To Have A New Garbage Disposal In Your Corpus Christi Homes

Garbage disposals help your kitchen run smoothly but are prone to problems. If yours is acting up and is near the end of its lifespan, which generally lasts 5 to 12 years, it may make more sense to replace it than repair it.

The price of a garbage disposal will depend on your disposal choice and plumbing costs.

How Much Should I Pay For A Garbage Disposal

So your cooking dinner and go to dispose of some waste in the garbage disposal to find out it is completely broken and not grinding food. Then you look in the cabinet and notice water dripping from the bottom of the disposal. This is a tell tail sign your garbage disposal is shot and needs to be replaced. So, how much should a garbage disposal cost? There are so many options and it can be quite confusing for the average homeowner, but here are some things to look for.

Make sure your Orlando plumber uses at least a 1/2 horse power disposal. Anything less will not last and does not breakdown the food very well. Usually 1/2 horse power is plenty but if you are a avid cook and use the disposal a lot you might want to invest in a higher horse power. It may cost more in the short term, but in the long term it will last longer.

Do not go dirt cheap. Insinkerator is a great mid range cost disposal. They also make higher end disposals.

Check the basics and make sure there is a slot under the garbage disposal to allow a plumber or yourself to unjam it. A lot of the cheaper models don’t have these and this can cause problems down the road and make a simple garbage disposal repair turn into a replacement.

If you have a garbage disposal problems give us a call.

If you need a garbage disposal replacement, be sure to contact Royal Plumbing at (361) 991-1002, our plumber is trusted and who will get the job done right at a reasonable cost.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/emergency-plumber/

from Royal Plumbing http://royalplbg.com/2017/01/17/how-much-to-pay-for-a-garbage-disposal-problem/

[royalplbg]

How To Handle An Overflowing Bath

Should Corpus Christi Homes Worry About Their Bath Overflowing?

Why you DO NEED to worry about your bath overflowing. I know someone who has had a bad experience with a bath overflowing, but it wasn’t their bath overflowing. It was in a flat two floors above. Interestingly the flat in between on the floor immediately below the bath didn’t get wet. How can that happen?

But for you to figure out if it is the bath overflowing or maybe any leaking in your home. Read more below to know the signs of your bathtub overflowing and what should we need to use to avoid these kind of disaster.

Over Flowing Bath Valve

Over Flowing Bath Valve Saves You From A Major Disaster

Just like our bath problems & Cures, we now have the over flowing bath valve, which stops you from having a major disaster.

Have you ever had water coming through your kitchen ceiling and panicked well calling the emergency plumber. Martin explains that he gets call quiet often. If only there was some device to stop your bath from over flowing, well now there is.

With the overflowing bath valve, when the water enters the over flow, the magnetic valves closes the flow of water on both sides of the taps. Amazing but true.

What are the chance my bath will over flow?

Can the over flowing bath valve be used on any bath?

Where can I buy the overflowing bath valve?

How much does it cost to buy the overflowing bath valve and also have it fitted?

Who came up with the overflowing bath valve idea & when was this brought out into the market?

Over flowing bath valve video.

What are the chance my bath will over flow

In so many homes and flats, there are so many plumbing complains, where there is water coming through the ceiling, mostly from flats and apartments. It is known by so many that water will most likely overflow over the bath at least three times in every persons life resulting in the customer sometimes calling for an emergency plumber, mostly from children or from the elderly where the young has not developed there brain for that there is something in the back of there mind saying, don’t leave the bath. In the mid age, it is most likely going to be a distraction, maybe from a serious phone call or with the elderly, this can be caused due to forgetting what you did in the last minute or 2. Either way, this can be very costly and a serious matter not to be ignored. Due to a bath over flowing 4 times, according to Nova Flo, it has been known that a bath causing £635,000 worth of damage, which was settle in court.

Can the over flowing bath valve be used on any bath or anything that over flows

The over flowing bath valve that is made by Nova Flo can be used on all baths that have a standard over flow fitted, the valve can also be used with basins or sinks that carry an overflow. If the overflow is build within the basin and does not include an external overflow, then this device will be unable to be used.

Where can I buy the over flowing bath valve

The only way you can buy the over flowing bath valve currently is by typing in ‘Buy Nova Flo’ into the search engine.

How much does it cost to buy the over flowing bath valve and also have it fitted

To buy the over flowing bath valve, you may be looking at paying about £100 to £150.

Who came up with the overflowing bath valve idea & when was this brought out into the market

It is hard to say who came up with the idea, however, the inventor was James Barnham, so with no idea of who came up with the idea, we have to presume it was James Barnham.

It takes a little effort to fix any plumbing issues especially when it comes on leaking.

If you have a problem with your valve, faucet or any plumbing issues just don’t risk yourself to fix it alone, think that if you can’t fix it there is a possibility the problem maybe worst and cost your more repairs. Give Royal Plumbing call at (361) 991-1002 to schedule a plumbing repair service.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/emergency-plumber/

The post How To Handle An Overflowing Bath appeared first on Royal Plumbing.

from Royal Plumbing http://royalplbg.com/2017/01/12/handle-overflowing-bath/

[royalplbg]

What To Do When You Accidentally Nailed Through Pipe

HAMMERED A NAIL THROUGH A PIPE WHAT SHOULD ORLANDO HOMES DO?

What if you or a hired carpenter accidentally hammered a nail through a pipe? and you have no idea what you will do to stop or fix those leak. Read more below on how you handle that situation to avoid any panic.

Nail Through Pipe 

Nail Through Pipe Problems & Procedures Includes Screws

How many times do fellow emergency plumbers listen to those saying I’ve put a screw or a nail through pipe. For an emergency plumber it seems to be like a fashionable thing to do, but for us occupants and our DIY situations, it’s the worst thing we can do, causing plenty of more damage on the way.

Martin Smith, an experience 24 hour plumber gets all types of calls and one of the most common water leaks with water coming through the ceiling is due to a screw or a nail that has gone through the pipe.

To the right of you in the picture is a typical nail, that has gone through a copper pipe. The picture at the bottom is corrosion from a copper pipe, due to a nail that has been left for a long time, eventually turning out to be an emergency plumbing issue.

10 Common Questions by Occupants placing a nail through pipe

How do I avoid putting a nail through a pipe?

How do I know if I’m putting a nail through a copper pipe?

I’ve put a nail through my water pipe, what should I do?

What sought of damage should I expect as I’ve put a nail through my pipe?

Is it best to leave a pipe with the nail in it if I’ve gone through it until it is fixed?

Is there any temporary way of stoping a leak if I put a nail through my pipe?

What is the correct way to fix a pipe that has had a nail through it?

If I put a nail through my pipe, do I need to drain down the central heating system?

Am I covered by the insurance company if I put a nail through my pipe?

Should I put the floor boards back have the pipe has been fixed due to a nail going through it?

How do I avoid putting a nail through a pipe

Martin Smith an experience emergency plumber explains “It doesn’t matter how many times you explain to someone about there water pipes under the floorboards, 50% of people will still put a nail through there water pipe. If putting one nail through the water pipe isn’t bad enough, 1 in 3 people would stick about 2 nails in the pipe or more. You tell them where the pipe is and they go and put a nail through it. It’s like placing a nail over the pipe, telling the occupant that if the knock the nail here, you will go through a copper pipe, so they go and knock the nail through the pipe“. Martin has also been called out to a plumbing emergency where the customer had put a nail or 2 in the pipe. Fixed the leak and to be on his way home, the phone rings from the previous customer, half an hour later, to be told that she/he has but another nail through the pipe. A couple of times, Martin has had to return to the customer 3 times. However the third time Martin took it upon himself to screw the floor boards down himself and tell the customer to not do any more DIY.

To avoid putting a nail through a water pipe, it is very important, not to place the nail close to the middle and keep it between 10 to 20mm from the edge of the floor boards. If you still manage to place a nail in the pipe, then the cutting of the joists has been incorrectly cut, leaving you nowhere to place your screws or nails. Another way of avoiding to put a screw or a nail in your pipes would be to use a pipe detector, however, this is not a good way if you have plastic pipes. If in doubt, take the floor board up and use a tape measure, to measure the distance of the water pipes.

How do I know if I’m putting a nail through a copper pipe

To acknowledge if your putting a nail through the pipe, you have to listen out carefully, once the nail hits a hard area, then this is most likely going to be a nail. Most people would hit a hard area and annoyingly hit the nail even harder, to force it’s way through. The only other way to know whether or not your going through a copper pipe with a screw or a nail, is the costly way, where you have water coming through your ceiling or a damp patch appearing where the nail enters the floor board. Other than this, it can take a few months for a water stain to appear.

I’ve put a nail through my water pipe, what should I do

If you put a screw or a nail through your water pipe, then the best thing to do is call an emergency, however, if you feel you can do the work yourself and a bit of DIY emergency plumbing, then the first thing you will need to do is to turn the mains water stopcock off. You can either turn the mains water stopcock off in the house or turn the external stop valve off. Depending on which pipe is leaking, you may be able to turn the gate valve off or isolate it in any way. Another little trick can be, tying up the float operating valve, so that when the water drains out of the cold or hot water storage tank or the central heating tank, there is no way of filling the tanks up. Failure to do either of the above, then you will have no choice but to call an emergency plumber. If your able to turn the water off, the next stage would be to drain down the cold & hot water and drain down the central heating system.

What sought of damage should I expect as I’ve put a nail through my pipe

Depending on how long the water leak has been for, if the leaking water is immediate and the water is stopped quite promptly, if your very lucky, then there will be no damage, however, most water leaks of this sought of water stains need to be painted, due to the water stain left by the water passing through the ceiling. Some nails work themselves loose over time, causing the surrounding pipe to corrode, ceiling to weaken and a damp patches appearing, some with a sudden gush of water causing major water damage. An extremely slow leak over a long period of time, can cause the floor joists to rot, which is not very common, however, it has been known to happen in the past. When putting a nail through the pipe, always expect the worse and hope for the best.

Is it best to leave a pipe with the nail in it, if I’ve gone through the pipe until it is fixed

If you have put a nail through the water pipe and your in need of an emergency plumber, always leave the nail in the pipe, as this will be used to plug the hole, until help is at your doorstep.

Is there any temporary way of stoping a leak if I put a nail through my pipe

Yes, there are temporary ways of stopping a leak, as long as you’ve not gone completely through the water pipe, however, you do require a screw and PTFE. It has been known that some plumbers when doing a temporary nail through pipe job, they have place a small screw with PTFE directly into the pipe, until the water stops from leaking. Once the screw has been completely fitted, then by applying a putty that goes rock hard, can solve the issue for may years and most likely permanently stopping the water leak, however this is not the correct way, as it has it’s minor disadvantages, but other than that, it saves plenty of money from completely draining down the central heating system.

What is the correct way to fix a pipe that has had a nail through it

The correct way to fix a water pipe, that has had a nail through pipe, is to completely drain the central heating system, cut out the hole in the pipe and either fit a new piece of pipe or just join up the pipes together. Some times by putting in a big coupler, this may stop the floorboards from being put back down, always try to avoid this disaster and to use the smallest join possible such as an end feed fitting.

If I put a nail through my pipe, do I need to drain down the central heating system

Unless the emergency plumber is very quick and knows what he/she is doing, in some cases, the water can be cut live and a couple fitting placed in, but this is only left to those who are very well skilled and prepared to take a chance. It doesn’t matter how good you are, by doing a quick job can become very disastrous. The correct way and what should be the only way, is to completely drain down the central heating system depending where the nail is, then fixing the water leak. Once the central heating system has been drained down, it is very important to open up the radiators on the highest floor until drained, once the top floor has been drained, then to open the radiator air vents below the top floor and so on. The only radiator that may not need completely draining down, are the radiators that are on the ground floor, as long as the pipe work goes from the lowest point to the above floor when joining the central heating circuit.

Am I covered by the insurance company if I put a nail through my pipe

It wouldn’t be correct to say that you are covered on your insurance, as there are so many without insurance. As long as you have cover for accidental damage and insurance for the damage it causes, then you will covered for the repair, however, some insurance companies require you to call them first if your in an emergency to stop the damage due to a nail through pipe.

Should I put the floor boards back once the water pipe has been repaired due to a nail going through it

Once the repair has been done due to a nail through pipe, it is important to assess what water damage there is and how damp the situation is. Before putting any floor boards back, it is very important to make sure the the area is fully dry, so that rot doesn’t set in and a smell occurring. You may need a dehumidifier to dry out the damp air and damp areas to speed the process of making sure the floor boards are good for putting back.

Call our professional plumbers.

If you have this emergency leaks in your home, Royal Plumbing is here to address your emergency concern just give us a call at (361) 991-1002 to get an immediate response to any plumbing issues.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/emergency-plumber/

The post What To Do When You Accidentally Nailed Through Pipe appeared first on Royal Plumbing.

from Royal Plumbing http://royalplbg.com/2017/01/11/accidentally-nailed-pipe/

[royalplbg]

The Use Of An Upflush Toilet

Planning To Add A Toilet In Your Corpus Christi Basement Or Attic?

Adding a toilet to the basement of your home can greatly increase the value of the home and the functionality of the space. However, if plumbing is not already running through the concrete pad that your basement sits atop, adding a traditional toilet to that part of the home can be pricey. In such a situation, an upflush toilet may be a better option.

Learning about the advantages and disadvantages of such a toilet will help you decide if it is the right option for you. Here are some of those tips.

What are the Advantages and Disadvantages of an Upflush Toilet?

Are you in a fix because your plumbing system does not have a downward drainage facility? In that case, the best alternative for you is an upflush toilet. These types of toilets are specially designed for upward disposal of waste materials to a larger drainage system. This type of toilets are frequently used in basements or other places below the ground level.

There can be different types of upflush toilets. The commonest form comes as a compact unit where an electric motor is used to grind the solid waste before pumping it up to the main drain. These are known as the macerating up flush toilet and are the least expensive of all upflush toilets. Another common type is a free-standing ejection system for sewage. These systems are installed below the incoming waste level, on an elevated platform. They have a separate pump to handle waste from external sources. Another type of upflush toilet is the combination of a traditional toilet and a sump pump that is used for pumping waste materials directly to the septic system or the external sewage. These systems are the most expensive of all upflush toilets as they require plumbing beneath the floor and excavation of the floor.

The biggest benefit of these special types of toilets is that they can be installed anywhere regardless of availability of traditional plumbing or drainage system. As mentioned at the beginning of this discussion, these toilets are excellent alternatives for areas that were not  intended earlier  to have a toilet. Upflush systems are extensively used in places that have no floor plumbing option. These units are portable, and hence, can be moved depending on the requirement of the users. Moving an upflush toilet only involves removal of four screws. This is why these toilets are extremely popular as temporary toilets for the elderly or people with special needs. Another great advantage is that these toilets require far less installation time comparing to the conventional ones. The entire installation process requires no or minimum breaking and digging.

In spite of so many benefits, upflush toilets do have some disadvantages, too. Firstly, the cost involved in installing them is much more than that of the standard toilets. Upfront toilets may not be a viable alternative for homes that already have a well planned plumbing system. However, it becomes the most economic alternative for an unplanned plumbing system. Also, these toilets can be pretty noisy because of their separate pumps and macerating systems. Upflush systems also get clogged more frequently and require frequent maintenance/repair comparing to standard toilets.

Learning those advantage and disadvantage of an up flush toilet will help you determine what is right for you.

If you are looking to install a toilet in a space where you don’t have an underground plumbing line in place, you have two options. You can either pay to run underground plumbing into the space or you can install a macerating up flush toilet. Call Royal Plumbing at (361) 991-1002 your plumber experts in installing a toilet and any plumbing repair.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/

The post The Use Of An Upflush Toilet appeared first on Royal Plumbing.

from Royal Plumbing http://royalplbg.com/2017/01/13/use-upflush-toilet/

[royalplbg]

Dishwasher Maintenance Tips For Corpus Christi Homes

The Proper Way To Maintain Your Orlando Dishwasher Clean

To make sure your dishwasher looks good and works well for a long time, be sure to maintain it properly. Having to repair dishwashers is expensive. Your owner’s manual has all the specifics you need, but here are some tips to get you started.

Proper Maintenance For Your Dishwasher

There’s fundamental dishwasher support you can do to ensure you get a flawlessly washed heap of dishes without fail. Dishwasher upkeep doesn’t take much time, however could prompt to your dishwasher effectively washing your dishes for more. From cleaning your channel to running a hot wash, these are some critical errands to take after to keep your dishwasher in great condition.

Clean the dishwasher channel when? Week-by-week. Why? This counteracts sustenance squander that has turned out to be caught in the channel winding up back on your dishes. The internal channels can be cleaned under the kitchen-sink tap with a delicate brush. The external metal channel simply needs washing with boiling point water.

Wipe the dishwasher entryway seals clean when? Week after week. Why? Nourishment stuck on the entryway edge can prompt to the seals dying and your dishwasher spilling. On the off chance that you utilize your dishwasher frequently, a fast week-by-week wipe of the edge and seals with a clammy fabric is all you have to do.

Beat up with dishwasher salt and wash help when? Month to month/when shown. Why? Salt stops limescale developing, and mollifies the water – dishwasher cleansers just work adequately in delicate water. Wash help helps dishes to dry without streaking. Most dishwashers have pointers demonstrating when to best up both.

Evacuate and clean the dishwasher splash arms when? Six-month to month Why? Blocked splash arms can prompt to unsuitable dishwashing. At regular intervals, expel the shower arms, jab the openings clear of any blockages, and flush under a tap.

Run the dishwasher unfilled and hot. When? Six-month to month. Why? This won’t massively affect the unwavering quality of your dishwasher, yet a hot wash will make preparations for your machine noticing – unsavory scents were the third most basic dishwasher issue reported in our yearly dishwasher dependability review. The boiling point water will evacuate any nourishment buildup, which can develop and prompt to frightful scents. This is especially essential on the off chance that you tend to utilize the eco program on your machine – in light of the fact that these projects utilize cooler water, develop of nourishment deposit is more basic.

To conclude, here are some fascinating facts about the dishwasher provided by Food Beast. Dishwashers were invented in 1887 by a rich lady thanks to her servants always chipping her fine China. The first dishwashers were hand-operated, wire compartments that held the dishes while they were sprayed with hot soapy water. While invented in 1887, it wasn’t until 1950 that the dishwasher was sold to the general public. Lastly, Using the dishwasher saves more water than hand washing.

Need help or have questions related to your dishwasher or plumbing system?

Your dishwasher should smell fresh, and you can feel a lot better about loading your dirty dishes next time around. Plus, you now know how to clean your dishwasher for next time! But if you notice some plumbing problems in your kitchen don’t hesitate to call us at (361) 991-1002 to get an immediate response with regards on any plumbing problems.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/drain-cleaning-repair/

The post Dishwasher Maintenance Tips For Corpus Christi Homes appeared first on Royal Plumbing.

from Royal Plumbing http://royalplbg.com/2017/01/10/dishwasher-maintenance-tips-corpus-christi-homes/

[royalplbg]

Grease Trap Installation For Your Kitchen Plumbing

The Importance Of A Grease Trap In Your Corpus Christi Kitchen Plumbing

Grease trapping systems are very important for preventing pipe damage within your property and also protecting the environment and waterways from being polluted with contaminants. While installing a grease trap tank above or below ground level does take time and energy, there are other items to consider, which can include receiving approval from various authorities.

But you can check more below to see if how a grease trap is helpful in your plumbing.

WHY YOU SHOULD CONSIDER INSTALLING A GREASE TRAP FOR YOUR KITCHEN PLUMBING

You may have heard the important piece of kitchen maintenance advice: “don’t pour oil, fat, or grease down your drains.” It’s good advice, and will prevent clogging and water pressure increases. However, there is no way to stop all grease from going down a kitchen drain, and because of that, you should consider installing a grease trap.

Air Mechanical, Inc. handles grease trap installation and other kitchen plumbing services in Blaine, MN. If you are having problems with frequent kitchen drain clogs, call us today to learn more about how we can help.

WHAT IS A GREASE TRAP?

Grease traps, also known as “grease interceptors,” are point-of-use units that are attached to the plumbing under kitchen sinks. There are much larger grease traps that are used in restaurants (in many regions, restaurants are legally required to have them) to take care of the enormous amount of grease that goes down the wastewater drains and can potentially clog septic tanks and sewer systems. The smaller units for residential kitchens are essentially tanks that are the first spot that wastewater from the kitchen flows through before reaching the septic tank. These tanks separate fat, oil, and grease from the water. Some of the new grease traps use bacteria to break down the organic waste material caught in the trap, which reduces how often the homeowner must empty it.

HOW WILL A GREASE TRAP BENEFIT ME?

It will benefit you the same way it benefits restaurants: reducing the amount of damage and clogging that fat, oil, and grease can cause to your plumbing and septic tank. As these liquids dry inside plumbing, they turn into waxy solids that will build up along pipes and begin to restrict water flow. They can also ruin septic tanks and require expensive repairs. Although you are not legally required to install a grease trap in your kitchen the way restaurants are, it will provide you with much cleaner plumbing.

HOW DO I INSTALL A GREASE TRAP?

The easiest way to put a grease trap into your kitchen plumbing is to contact a reliable plumber to do the job for you. Grease trap installation is a tricky task if you don’t have training or know the right kind of trap to put in, but for a trained plumber it is a simple job.

Call our Corpus Christi Plumbers To Do The Job For You.

If you need a grease trap Interceptor installed, repaired, or just cleaned out, we here at Royal Plumbing can look after these jobs with the utmost skill and professionalism. Our plumbers are dedicated to provide any service that you require regarding grease traps, with a focus on great customer service and satisfaction. Call us at (361) 991-1002 to schedule an appointment.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/drain-cleaning-repair/

The post Grease Trap Installation For Your Kitchen Plumbing appeared first on Royal Plumbing.

from Royal Plumbing http://royalplbg.com/2017/01/06/grease-trap-installation-kitchen-plumbing/

[royalplbg]

Signs That Your Water Heater Need To Fix

How Could Corpus Christi Homes Know That Their Water Heater Needs To Be Fixed

Most water heaters last between eight and 10 years. However, your water heater will most likely need to be repaired before it hits the eight or 10 year mark. Water heater problems have a tendency to get worse. That is why if you suspect a problem, then you will want to get it repaired as soon as possible.

Below are some signs that indicate your water heater needs to be repaired.

Signs Your Water Heater Needs Fixing

Water heaters normally last from 10 to 15 years before they would need replacement. But if you notice corrosion or if any of the internal parts are encased in mineral buildup, your water heater may not be as efficient. Flushing the water heater regularly would keep it working for a longer time.

You do not need to guess anything, though. There are some telltale signs that will alert you if it’s time you find a new water heater before your current one completely fails. Here are some of them:

  If there is no hot water, you can try checking for power. It is true that no hot water is a sure sign that the water heater is failing, but it could also mean the pilot light is out or perhaps the circuit breaker has tripped.

If rusty water comes out of your hot faucet, it’s not a good sign at all. This usually signals an upcoming failure of your water heater.

If there is a noticeable increase in sediment or if there are signs of muddy water in your water tank, you should worry. How do you check this? Attach a hose to the drainage bib of your water heater and make sure the unit is turned off. Drain it so you can examine its contents properly.

If you smell and taste the water and you notice that it has a metallic taste to it, then that is an indicative that your water heater will be breaking down real soon.

If you notice noises that were not there before, that is a warning sign, too. You have to pay attention to any noise that your water heater makes. There are those normal sounds when water heats and then there are loud pops and cracks which you would not hear from a properly working water heater. Those sounds indicate that there is an interaction between the heating elements and the scale as well as the mineral deposits that have been building up on them.

If you see any sign of leaking water around your water heater, especially when none has ever leaked before, you should take immediate action. What you should do is to disconnect the equipment from its source of electricity or turn off the gas.  Make sure the water has cooled down before trying to remove it and replacing the water heater. Leaks indicate internal failure in your water heater.

Call our experts if you noticed some of those signs that your water heater needs to be fix.

These are some of the signs that your water heater is nearing the end of its lifespan. If you notice any of these problems, you can always give Royal Plumbing a call at (361) 991-1002 and we’d be more than happy to repair your water heater or even replace it if need be.

For More Related Articles: http://royalplbg.com/plumbing-services-corpus-christi/water-heater-installation-repair/

The post Signs That Your Water Heater Need To Fix appeared first on Royal Plumbing.

from Royal Plumbing http://royalplbg.com/2017/01/05/signs-water-heater-need-fix/