sacer-shop-blog

[sacer-shop-blog]

LCD display for Renault Twingo II 2007-2012

Are you looking for LCD display for Renault Twingo II 2007-2012?

Instrument clusters, MID, SID and OBC units in several car makes have the common dead, fading, or completely disappearing pixel problem on the instrument cluster and on the on board computer (OBC) LCD display that shows valuable data such as the mileage, temperature, time and the OBC messages. Common symptoms of pixels error are: --> Single pixels or complete lines of pixels have disappeared --> LCD displays are difficult or impossible to read --> Some cases the display returns to complete working order once cluster hits high or low temperatures.

Dead LCD pixels, fading LCD pixel, faulty gauge motor on the instrument cluster are quite bad looking parts of a good car’s interior, more importantly it seriously affects the driving safety. In some specific cases you can hardly enjoy driving for some annoying misunderstanding caused by the malfunction of LCD display. So it is quite necessary that you have to get it fixed or replaced.

We offer an LCD display replacement that covers the majority of the car makes and models in Europe and North America. We aim at solving your LCD display problems and anything related in a more convenient and more cost-effective way. For a repair shop, we’re doing our best to build up ‘One-stop purchase all’ products lines to meet your demands for various car makes and models.

SA1227 LCD Display with ribbon / flat cable is a replacement exclusively for Renault Twingo II 2007-2012. It’s used on the area of instrument cluster or dashboard. It’s heat seal type, to install it, you need a heat bounding machine to mount it on the PCB. Actually it is not difficult, you can follow the steps from a video on Youtube where you can easily find out plenty of such tutorial videos. SA1227 LCD display with ribbon / flat cable is an STN LCD digital panel which has a pretty good picture definition and sharpness. A perfect visual effect and stable performance constitutes the key point of a high-qualified LCD display. SA1227 will fully meet your requirements. What’s more, it is able to work normally under a large temperature rage from -20 ℃to 70 ℃. Please rest assured that it is 100% brand new product and every unit will be tested prior to leaving the factory. We have an excellent quality guarantee of a full function OQC test and confirmation for every unit. And also Finish full function at HALT test, and further more, 2 years Full Warranty.

Apart from LCD displays, SACER Ltd actually offers more other high-quality electronic control modules in automobile aftermarket, a supplier that provides stable high quality automobile products and related supporting services for foreign car repair workshops in the Long-term, mainly the high-end car market in Europe and North America. With over 10 years of efforts in this field, we have a clear understanding and valuable experience of the industry. Based in Netherlands, with a strong R&D team in Shenzhen, southeast China’s Guangdong province, There is a comprehensive integration of the advanced European Automobile technology and an abundant supply chain support in China. SACER has continued to grow and remain at the forefront of high-performance industrial Application. Visit us at our online shop and find out a chance to cooperate, https://www.sacer-shop.com

[sacer-shop-blog]

The ECU Ignition Board For Mercedes

Preface: Ignition system is an important part of the gasoline engine, the ignition system performance is good or not, which also affects the engine power, fuel consumption, and exhaust pollution and so on. All the equipment that can generate a spark between the two electrodes of the spark plug, which is called the engine "ignition system", usually consisting of the battery, generator, distributor, ignition coil and spark plugs and other components.

The Traditional Ignition system can be classified into the following types.

◆ Battery-operated ignition

◆ Magneto systems

◆ Electronic ignition

◆ TI-B Breaker-Triggered transistorized Ignition

◆ SI (semiconductor Ignition)

◆ DIS （Distributorless Ignition System)

The traditional ignition system is relatively simple and low cost, which is an early application on the car, and it is also a common ignition system for the ignition system.

But the ignition system is poor reliability, ignition conditions affected by the speed, contact technical conditions. And need for regular maintenance adjustment. So with the development of the auto technical, The traditional ignition system also can’t keep up with the requirements of the modern engine, replacing day by day by the latest Electronic ignition system. Because of Electronic ignition system ignition voltage and ignition energy, by the engine conditions and the use of the impact of small.  Such as Simple structure, reliable work, maintenance, adjustment of small workload, save fuel, reduce pollution, the application of increasingly widespread

The Electronic ignition system can be classified into the following types.

◆  Contactless ignition

◆  ECU (Electronic Control Unit)

◆  Distributor-Less Ignition

The signal is sent by ECU directly to control the ignition coins and so on.

Sacer’s ignition board belongs to the modern ignition board, which is controlled by ECU, Moreover, The ECU on ignition board, the signal is controlled by HFM. We know that HFM is a kind of air flow meter(AFM). It converts the inhaled air flow into an electrical signal to the electronic control unit (ECU). As one of the basic signals for determining the fuel injection, it is a sensor for measuring the air flow rate of the intake engine.

It has the following types.

Throttle air flow meter

Carmen vortex air flow meter

Hot air flow meter

Hot film air flow meter

And, Generally, luxurious cars with high equipment, which equips the HFM on the ignition system. Sacer’s ignition board has such an HFM and the price is also preferable one for customers.

Please come to Sacer store if you are finding a high-quality ignition board for Mercedes air flow meter , Porsche 928/S4/GTS ECU, Volvo / Saab Jetronic ECU.

Of course, we advise that you purchase Sacer’s ignition board for Mercedes, which is an extremely high-quality one with ECU, HFM. It is also a hot one at Sacer, It applies in 4 cylinder Ignition driver board. More details are as follows.

SA1090 - IGNITION BOARD FOR MERCEDES HFM ECU

Application：4 cylinder Ignition driver board

Model：Mercedes

Specification：Ignition board for Mercedes VDO 4 cylinder

Description：

Ignition board for Mercedes HFM ECU, We supply an conventional aftermarket

replacement board. To use Ignition Boards you can either 1) Cut off pins

1, 2, 3 & 5 (see below) or 2) Remove the solder from the holes on the ECM

PCB and install the Ignition Boards module without cutting the pins It is

quite safe to install the module without removing the extra pins

Please follow Sacer’s home page if you are an auto parts retailer, supplier or repair shop/manufacturer. The web page’s staff will update the latest news about Sacer, even the latest and funny news about the car industry. Welcome to visit www.sacer-shop.com or contact us by shop@sacer.com.cn for more information.

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

LCD display FPC and IC driver for Audi/VDO group

Sophisticated graphics displays in the instrument cluster are a proven way for makers of premium vehicles to add consumer appeal and cachet to new high-end models of car. Audi has won rave reviews for its ‘Virtual Cockpit’ instrument cluster in the 2016 TT roadster. Everything in view, directly in front of the driver – the Audi virtual cockpit, a fully digital instrument cluster, is completely driver-focused. The 12.3-inch display depicts information in high resolution.  

This type of cluster display is visually exciting, intuitively informative, easily configurable on-the-fly to display different types of data or image appropriately. The contrast with conventional electro-mechanical dials and gauges is stark. And thanks to the user-interface innovations of smart phones and tablets, today’s car buyers’ appreciation of the performance and appearance of the displays in the cabin is acute. The instrument cluster, in other words, has become an important marketing differentiator in premium vehicles.

There is no comparable section on maintaining your instrument cluster LCD display because generally nothing can be done for an unworkable display except return it to the manufacturer for a replacement. Or buy an alternative display and replace it by yourself.

Availability and performance are always the key factors to consider when selecting an alternative display, with viewing angle, brightness, response time, power and size varying between different technologies. Keeping your display in tip-top condition is necessary in order to continue obtaining the best possible image and picture quality, prolonging the display's useful life, and getting the most from your investment.

SA1003-1, LCD display with FPC and IC driver for Audi/VDO group, All new design, comparable to the original, with perfect brightness and superior color. Same TAB IC driver as OE. The screen has pretty decent resolution and brightness for its size. When it comes to installation, first you need to clean the PIN from PCB side before soldering. Recommend soldering skills. If you could remove the OE IC driver from display well for re-soldering process, SACER could provide LCD display with FPC separately for you. Normal soldering machine with very patient skills would be necessary.

SACER Ltd, a company acknowledged as the Resource Integrator of European design and Chinese manufacture in the Automobile aftermarket. We offer a comprehensive product portfolio, which includes the products of various kinds of auto electronic control modules. Including instrument LCD display, ABS/ECU/repair spare parts, DC motor for throttle body and automobile semiconductors, etc. And an independent expert redesign and development category of turbo actuator, non-contact TPS sensor, ECU, window regulator, EPS/EHPS control board and air flow meter, etc. The SACER founder is a group of expert has over 10 years experience in automobile re-manufacture industry. We aim to providing the various auto electronic products and solutions for the automobile re-manufacture applications. With our unbeatable endeavor and outstanding service performance, SACER has won customers’ deep trust and continuous orders all over the world. Please visit our online shop for more products,  https://www.sacer-shop.com

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

Electronic safety device and Four-Wheel Drive system Indicators

Preface: The security electronics are the basic safety device for a car. Such as ABS, EBD,BA,TRC,VSC,EPS. Editor will continue to introduce the indicator on dashboard Editor has introduced the Basic Indicator light information on vehicles, Light basic indicator information on dashboard, Gearbox /vehicle running and driving status indication.

What is known to us is that 90% of the vehicles on sale that has equipped ABS. With the auto parts development in the international market, many customers also pay much attention to electronic safety device so that they can know whether their car has a problem.

There are VSC, EPS, TRC, TPMS on a dashboard. Customers are in danger if above warning indicators come up. So please check it as soon as possible.

The electronic safety system prompts are abnormal or showing on dashboard, which means a fault for  your car

Warning

Faults existing

ESP

Electronic Stability Program is closed (at this time the vehicle in the extreme circumstances easy to get out of control)

TPMS

Tire pressure is insufficient, tire pressure sensor failure

TCS

The traction control system is closed (at this time the vehicle is easily out of control at the limit）

More and more customers prefer to purchase SUV car model except for the electronic safety indicator signs. If so, they can go outside for a drive, Such as travel. So it is a popular trend for customer to purchase at present. Please read it carefully if your car is four-wheel drive SUV. Because you will see the following logos. Such as 4WD-OPEN, 4WD-CLOSED, 4WLOCK OR 4W SYSTEM , TOD Xdrive.  It means that the 4wd is running well if you see the above indicators.

But what we have to notice is that 4WD cars may exist some 4wd signs. Such as SUZUKI KIZASHI. But most of cars have 4WD indicator on its dashboard, which will light for a while when car is self-checking.

Sacer’s auto parts are used to 2wd. We hope that customer could contact Sacer’s sales representative for the details if you want to purchase auto parts from Sacer. We are specialized in spare auto parts. Such as SA1012 - LCD DISPLAY FOR MERCEDES W203 C-CLASS, which applies in Instrument Cluster It is a high quality and hot sale one in Sacer.

LCD DISPLAY FOR MERCEDES W203 C-CLASS,

Application

Dashboard, Instrument Cluster

Model

Mercedes C-class, AMG W203 (2000-2007)

Specification

Same IC Driver with OE. Soldering is not needed.

Saceris a steadily growing manufacturer funded by highly skilled and experienced electronic engineers in 2007, which develops and produces electronic control modules in the automotive aftermarket. We have our own engineering team in Europe, together with more than 100 employees in China and we manage to create the Quality Bridge between European design and Chinese manufacture. Welcome to visit www.sacer-shop.com or contact us by shop@sacer.com.cn for more information.

More information, contact Sacer sale team. Welcome to visit www.sacer-shop.com or contact us by shop@sacer.com.cn for more information.

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

LCD Display With Ribbon/Flat Cable

Over the decades of the “Star Trek” TV and movie franchise, the ship’s computer displays evolved from steam-age dials and switches to large 21st-century video displays that could be configured to perform seemingly any task. An emerging generation of new models is making the move toward virtual displays that, as with the later iterations of the Enterprise (but without the suspect plots and thin character development) permits a single display to be configured for numerous tasks.

LCD displays that can show any image or information the car’s computer can conjure are beginning to appear in some new models. For now, we have concepts of the idea and production cars that supplement physical analog gauges with LCD video screens.

Dead LCD pixels, fading LCD pixel on the instrument cluster are quite bad looking parts of a good car’s interior, so it is understandable that you may want to get it fixed. Replacement of the complete unit is quite expensive, that is why we try to encourage people to get it fixed by a professional at half price or do the screen or ribbon cable replacement at home on the tenth price. This very common display pixel failure is known on several units, like dashboard instrument cluster (speedometer), MID, and radio units, OBC (on board computer), and SID, and happen to several CAR manufacturers that use Siemens VDO electronics such as BMW, Audi, VW, Seat, Mercedes, SAAB & Rover etc. - you will find almost every different model on our site.

SA1234 is a top-quality LCD display with ribbon/flat cable used in the instrument cluster or dashboard, for Porsche 911 996 (1998-2005). Need to heat bonding to PCB and you can follow the install instructions from some video on YouTube, it is quite easy and funny for you to get a solid installation even though you have no knowledge about it at all before.

The display works just like the original one. very good visual effect and stable performance! 2 years Full Warranty. It is an optimal choice for an OE replacement. SACER always provides its customers with Auto Electronic Control Modules in top quality and cost-effective price.

SACER is a steadily growing manufacturer funded by highly skilled and experienced electronic engineers in 2007, with a strong research and development capability, and a highly expert auto electronic repair solution provider, SACER has been ranking among the top in the automotive aftermarket of the electronic control modules. We have our own engineering team in Europe, together with more than 100 employees in China and we manage to create the Quality Bridge between European design and Chinese manufacture. So that we can meet a variety of customized requirements of customers worldwide. If you have anything in need of the auto electronics components, please feel free to visit the site to get more car parts information, https://www.sacer-shop.com

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

The gearbox indicators/ Driving status indicators (Part 3 )

Preface: This article is about part 3, continuing to part 1 and part 2, which is an explanation of indicator information on the dashboard.

Most of the auto gearbox has been designed different model to guarantee different customers needs so that customers can control the vehicles.The following model is the representative one.

The Volkswagen’s vehicles have its unique shifting gear logos, which will work on the AT vehicles. The shift will be changed when drivers step on the brake pedal.

About Open the snow status of gearbox

Opening the snow mode of gearbox is a kind of gear box control mode that can guarantee vehicles can drive safely under the snow status and Low adhesion ground.

About O/D OFF

O/D OFF Status indicator will  appear on vehicles who has the 4-speed automatic transmission. It indicates that the biggest shift is only be locked on 3-shift. But it doesn’t have such a marks if the customer has 4 speed AT gearbox but without D3-shift.

Normally, The AT gearbox ‘s vehicles has its prompt indicators on its dashboard. Such as the snow status gearbox and the shifting prompts. Besides, For some sports-oriented models, there will be some driving mode options, such as the driving mode options of Audi Customers can learn about the driving status on a dashboard, which is showing in English. Such as “sport”,“comfortable”,“ECO”.  There is also some Cruise control system (CCS). In order to make customers know whether the functions has been switched on, some manufacturers will design a special symbol to show it in English “ Cruise”. Different colors showing on dashboard represents different working status. Such as, green color represents working status.

So we recommend customers to purchase SA1018-1 - LCD DISPLAY WITH FPC AND IC DRIVER FOR AUDI / VDO GROUP, which applies in Dashboard. It is a high quality one, we promise.

LCD DISPLAY with FPC and IC driver for Audi / VDO group

Application

Instrument Cluster, dashboard

Model

Audi A3 / A4 / A6 / TT / Jaeger

Voltage

12 V

Connection Method

Soldering

Same TAB IC driver as OE. Need to clean the PIN from PCB side before soldering. Recommend soldering skills. If you could remove the OE IC driver from display well for resoldering process, Sacer could provide LCD display with FPC seperately for you. Normal soldering machine with very patient skills would be necessary. Difference between SA1003 & SA1018: Same LCD display with different shape of FPC connector, make / models are also different.

Installation instruction:

If used in the JAEGER / MARELLI models, for soldering, as the picture shows, aligned and soldering the right pins, the left four pins do not need soldering.    

More details, follow Sacer please.

Sacer is a steadily growing manufacturer funded by highly skilled and experienced electronic engineers in 2007, which develops and produces electronic control modules in the automotive aftermarket. We have our own engineering team in Europe, together with more than 100 employees in China and we manage to create the Quality Bridge between European design and Chinese manufacture. Welcome to visit www.sacer-shop.com or contact with us by shop@sacer.com.cn for more information.

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

LCD display with FPC

The automotive aftermarket and after sale sector is a complex, robust and highly competitive market that provides the support network for Europe’s millions of cars, vans, trucks and buses. The automotive aftermarket’s multifaceted and diverse segments cover the whole repair, maintenance and service spectrum from parts supply to fitment and servicing.

Passenger car and commercial vehicle owners rely on a network of parts suppliers, fitters and repairers to keep their vehicles in correct working order. 90% of consumers are satisfied with the repair and maintenance offerings of the highly competitive market. They make informed decisions about where to repair their vehicle based on factors such as price, convenience, quality and the age/value of their vehicle. Consumers’ preferences are not fixed and change as their vehicles age. Accordingly, vehicle manufacturers are not dominant players in the aftermarket maintenance over the lifetime of the average vehicle.

Dead LCD pixels, fading LCD pixel on the instrument cluster are quite bad looking parts of a good car’s interior, so it is understandable that you may want to get it fixed. Replacement of the complete unit is quite expensive, that is why we try to encourage people to get it fixed by a professional at half price or do the screen or ribbon cable replacement at home on the tenth price. As we sell quality LCD display, flexible ribbon cables, bulbs/lamps only for DIY repair. This very common pixel failure is known on several units, like dashboard instrument cluster (speedometer), MID, and radio units, OBC (on board computer), and SID, and happen to several CAR manufacturers that use Siemens VDO electronics such as BMW 3 5 7 series, Audi A3 A4 A6 A8, VW, Seat, Mercedes C and E class, SAAB & Rover - you will find several different models on our site.

SA1243 is a top-quality LCD display with FPC used in the instrument cluster or dashboard, for DAF LF (2001-1) / XF 105 (2002-) / XF 95 (2003-),DAF XF 2002. very good visual effect and stable performance! 2 years Full Warranty. It is an optimal choice for an OE replacement. It works out just like your original one.

SACER strives to provide a truly professional service with great attention to detail. and serves many European and North American dealerships, auto repair facilities and owners to provide an affordable repair alternative that not only restores your part to like new condition but in many cases improves the reliability and longevity. This is mainly accomplished by using vast repair experience and OEM, redesigned/improved OEM and aftermarket components. SACER is equipped with professional R&D team and manufacture tools, as well as self-developed testing equipment to ensure proper handling, troubleshooting, testing and programming of the components SACER service. As enthusiasts, we hope that our services will further improve your Audi, BMW, Mercedes, Porsche and VW driving experience! Need any help or just would like to place orders over the Internet? Just Contact Us to find out what you need !https://www.sacer-shop.com

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

Stepper Motor Replace in Pointer Gauges

The world is digital today, and most information is represented in numbers. However, human nature is more "analog" and better represented in an old-fashioned way, using pointer gauges and bar graphs. Pointer gauges can be found in many applications. Automobiles, trains, and even modern aircraft dashboards. It does not look like good old pointer gauges will disappear in the near future.

An efficient way to control a pointer gauge is to use a stepper motor. A stepper motor is an electromechanical device that converts electrical pulses into discrete mechanical movements. The shaft or spindle of a stepper motor rotates in discrete step increments when electrical command pulses are applied to it in the proper sequence. The motor's rotation has several direct relationships to these applied input pulses. The sequence of the applied pulses is directly related to the direction of motor shafts rotation. The speed of the motor shafts rotation is directly related to the frequency of the input pulses.

Advantages of using stepper motors  

The motor has full torque at standstill (if the windings are energized).

Precise positioning and repeatability of movement since good stepper motors have an accuracy of 3 – 5% of a step and this error is noncumulative from one step to the next.

Excellent responsiveness to starting/stopping/reversing.

The motor’s response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.

It is possible to achieve very low-speed synchronous rotation with a load that is directly coupled to the shaft.

A wide range of rotational speeds can be realized since speed is proportional to the frequency of the input pulses.

A perfect way to control a pointer gauge is to use a small stepper motor specially designed for pointer control. Today, many companies provide stepper motors for gauges which quality varies greatly. SA1077-1 stepper motor is among the first class quality level. And it is an optimal choice for OE replacement, it works just like the original.  

SA1077-1 goes exclusively for BMW 7 series / F01 / F02 / F03 / F04 / F07 / F08 / F10 / F11, GT. It is mainly used in dashboard or instrument cluster or some other digital indicator equipment to transfer a digital signal into an accurate analog display. The metal shaft is 8mm long.

  Advantages are as follows,

High precision in positioning and indication

Small & stable hysteresis, minimized position error.

Low noise

High-temperature capacity

High accuracy internal stopper design, internal reset supported

Perform smooth movement under micro-stepping control.

SACER Ltd, established in 2007, is dedicated to developing and producing electronic control modules products for automobile aftermarket, covers a total application area of instrument LCD display, ABS/ECU/repair spare parts, DC motor for the throttle body and automobile semiconductors, etc. And an ODM category of turbo actuator, contactless TPS sensor, ECU, window regulator, EPS/EHPS control board and air flow meter, etc. which requires products with highest stable quality and consistent performance to stand out from the fierce market competition. To learn more about SACER and find out what you need, please check it out at our online shop, https://www.sacer-shop.com

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

Explanation of Indicator Information on Instrument Panel(Part 2)

As has been written on part one, Know the warning light better and keep you and your family away from the dangerous.Today, we will continue to explain some meanings of the Warning light on dashboard continuing the part one.

The Basic Indicator light information on vehicles( Written in part one )

Part 2 Light basic indicator information on the dashboard.

(this article main topic )

Part 3 Gearbox /vehicle running and driving status indication

Part 4 electronic safety device / four-drive system logo

Part 5 smart key prompt logo

The light warning indicator which is same important as the vehicles itself symbols. It is also the key for customers driving. That is a light prompt logo on the car.

Friendly tips are necessary for drivers. Check whether the light indicator normal.  Especially, you find the homologous light can’t work but the indicator lights on the dashboard are normal.

Because it is very dangerous, especially, driving in light. No lighting exists a potential accident.

Please use the appropriate vehicle lighting when you drive at night, please kindly open the headlight when you drive at light. The High beam shouldn’t be turned on for a long time.

the wrong use of vehicle lighting may cause an unnecessary trouble for yourself and the other vehicles  

Especially the width lamp on a car, which shows the width of the vehicles, it is a warning for the other cars, telling them the warning signals. This is very practical and useful for driving on a raining day or driving at night.

The above is the part 2.

Recommendation time, today, we will recommend SA1227 - LCD DISPLAY WITH RIBBON/FLAT CABLE, which applies in instrument cluster and dashboard.

LCD display with Ribbon/Flat Cable

Application

Instrument Cluster, https://www.sacer-shop.com/sa1229.htmldashboard

Model

Renault Twingo II 2007-2012

Specification

LCD display with Ribbon/Flat Cable

Many customers of Sacer has pre-order it. It is one of the hot sales at Sacer store. Editor recommends it to people who are finding an LCD DISPLAY like this.

The rest of parts 3,4,5 will be written in the next article, please follow Sacer.

Sacer is a steadily growing manufacturer funded by highly skilled and experienced electronic engineers in 2007, which develops and produces electronic control modules in the automotive aftermarket. We have our own engineering team in Europe, together with more than 100 employees in China and we manage to create the Quality Bridge between European design and Chinese manufacture. Welcome to visit www.sacer-shop.com or contact us by shop@sacer.com.cn for more information.

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

How to choose an LCD display for in-car use

A car has many wild requirements that normal electronic products do not. Your LCD display panel will suffer from dust, particles, water, coke spoils, misuses, vibrations and small hits... the list in endless. Almost no household LCD display is designed to support this. And this is the reason why most car dashboard projects are bad projects and do not last for even a couple of years before many topics arise.

So, How to choose an LCD display replacement for in-car use?

First of all, just do not try anything that has not been validated for in-car use. Then, go to an aftermarket that focuses on automotive products. Or better, try contacting the big makers from car infotainment and find out who is providing them with the panels. Buy those panels for your car project. It will be much more expensive and you even may not be able to buy them.  

And I know because I work for a work leader in car displays and work with the major European car makes as the customers. And I can honestly tell you that a common LCD panel and an automotive LCD panel are absolutely different. OK, here is an ideal replacement choice for you.

SA1001, an LCD display for SAAB for OE replacement, It is exclusively used for Saab cars, which were made in the year of 1998--2002, since it was quite a long time ago, so, for now, it is not easy to find out an age-matched and first-grade quality LCD display for replacement. As it is known to all, SAAB Automobile was a car manufacturer with a long history, which was founded in Sweden in 1945. It is the sophisticated quality and the unique characteristic that makes SAAB car stand out from the crowd and capture massive customers worldwide.

SA1001 LCD display with flat cable is used on the area of an information center, For connection, All you Need is a heat bonding machine to mount it on the PCB, It is easy so that you can save much installation work. it is with STN LCD digital panel which has a very good picture definition and sharpness. A perfect visual effect and stable performance constitute the key point of a high-qualified LCD display. SA1001 will fully meet your requirements. We have an excellent quality guarantee of a Full function OQC test and confirmation for every unit. And also Finish full function at HALT test, and furthermore, 2 years Full Warranty.  

Here attached more details for your reference,

Apart from LCD displays, SACER actually offers more other high-quality electronic control modules in automobile aftermarket, a supplier that provides stable high-quality automobile products and related supporting services for foreign car repair workshops in the Long-term, Mainly the high-end car market in Europe and North America. With over 10 years of efforts in this field, we have a clear understanding and valuable experience of the industry. Based in Netherlands, with a strong R&D team in Shenzhen, southeast China’s Guangdong province, There is a comprehensive integration of the advanced European Automobile technology and an abundant supply chain support in China. SACER has continued to grow and remain at the forefront of high-performance industrial Application. Please check out for more at our online shop,https://www.sacer-shop.com

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

On-board LCD Display Exclusively go for SAAB

Now autocar has been one of the main vehicle for people to a large extent of popularity all over the world. The safety and comfort take the most attention of today’s demanding customers, and both of them has relationship with on-board display. The safety needs display to show information and the comfort needs it to make fun, so a display is playing quite an important role in a car.

 SACER is a specialized manufacturer of car components in aftermarket, with European quality and competitive price. Our products and services are divided into multiple categories to fit the needs of your workshop or for your own use. As a SACER customer, you always have favorable price and shipping terms, you will receive beneficial discount rates. What’s more, you can always be sure we are doing our utmost to customize a solution that fits your needs. And we’ll never lock you into complicated purchase quotas or franchise agreements.

 Here is a Lcd display for your reference, Item Number SA1001-2, It is exclusively used for SAAB, as it is known to all, SAAB Automobile was a car manufacturer with a long history, which was founded in Sweden in 1945. It is the sophisticated quality and the unique characteristic that makes SAAB car stand out from the crowd and capture massive customers worldwide.

SA1001-2 is a Lcd display replacement used on the position of information center, It is an old version, it is a little bit red in contrast, if you want the same contrast as an OE one, please order the latest improved version SA1001.

 SACER’s online ordering portal makes it easy to find the right product you want and place orders quickly without any trouble. The portal also provides access to many other services offered by SACER.

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

Skills For Distinguishing Poor Quality Auto Parts

Master some of the identification of fake and shoddy auto parts products knowledge are necessary for a man who works on selling auto parts or driving , Generally speaking, The following skills for identification are practical methods.

Customer can distinguish whether it is a good quality or poor one via packages , appearance , color, material, paint, crafts,storage methods, professional basic parameters, Connection methods, the marks, shortage accessories problems, protective layer, certification owned.

Today, Editor will elaborate the identification skills by packages , appearance , color, material, paint. The rest of the methods will be told at the latter article.

Methods 1

How does customer distinguish the shoddy auto parts via package?

Honestly, The original packages are normally standard and professional with the unified standard specification, clear and formal printing,.Nevertheless, Counterfeit packaging is relatively poor. So customers can identify whether it is a good one via package.

Methods 2

Distinguish the shoddy auto parts via articles color.

The original one , especially the surface color, is specified color by original manufacture. It must the fake one if the color is not the original one. It is easy to distinguish it via color.

Methods 3

Distinguish the shoddy auto parts via products appearance.

Generally speaking, Original parts of the appearance of printed or cast word and mark clear and formal, and counterfeit products appear rough appearance.

 Methods 4

Distinguish the shoddy auto parts via products paint.

An awkward problem has been occurred by most of customers. The second hand used and damaged auto parts are be processed again by dismantled, reassembled methods, making it as a eligible one to sell and earn the high profits, illegally. It is an extremely immoral behavior.

 Methods 5

Distinguish the shoddy auto parts via products material of the auto parts.

Strict requirements are essential for the original manufacture, especially the material and design. Each procedure is a key for original manufacture to process it. But, Adopting a low quality material to reduce production cots so that they can earn the illegal high profits, which is a irresponsible attitude for customers. It is related to a happy of family. Using the high quality material to produce high quality auto parts, which can avoid less car accidents. Sacer is a professional with the standard service system and technicians and producing procedures,It is the best choice for supplier, especially those supplier who want to find a professional auto parts manufacture.

 First,Sacer R&D team knows the products and markets very well. There are more than 10 experienced engineers in the automotive electronics from domestic and oversea,making our products more close to local demands.

Secondly, a high qualified rate and 360 degree testing. All of our products passes the tests like full sizes, temperature, aging, drop, vibration and salt spray. Each shipment will contain one inspection report. Sacer also passed ISO9001: in 2000 in 2015

Thirdly, Sacer sets up a full of adequate storage and logistics system, assuring shipping to customers timely. Each model has a certain quantity in stock for supply. Through our online shop you can always reach us, 24/7. Two warehouses guarantee the fast shipping to our customers, our European warehouse in Germany and our Shenzhen warehouse in China.

We supply an conventional aftermarket replacement board. More information, contact Sacer sale team. Welcome to visit www.sacer-shop.com or contact with us by shop@sacer.com.cn for more information.

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

The Faults And Solutions For Reverse Image Showing Unsuccessfully

Preface: The reverse image is especially practical invention, cooperating with parking distance control ,It doesn’t worry the reversing cars issues.But what makes us confused is that the reverse images doesn’t show clearly, which makes us feel very annoyed. Today, Editor will discuss the reasons and solutions for the above problems.

Diagnosis and solution

The reasons for blurred reverse image are as follows.

There are water mist or mud on webcam, if so, please just wipe clean.

There are some scratches on camera. If so, Editor suggest that customer should purchase a new webcam, It is best to put a protective film on the outside of the camera.

The bad quality for video showing, if so, It is the accessories problems. We suggest that customer purchase a high quality one.

How could we solve the showing unsuccessfully issues?

For the problems, there are 3 reasons. First , it is monitor setting problem, second, it is webcam faults, third , it is wire problem.

For the monitor setting problem, it is a common problem for most of drivers.

We suggest that customer turn on the internal switch into status “ ON”, Generally,  in the display settings inside there is a camera switch control.

For the webcam faults, we suggest that customer should purchase a new one.

For the wire issues, it is a high frequency problems for us,  If so, we need to check the direction of the wire arranged before, because the wire is be set from dashboard to car trunk. So it might exist some bad connection with plug or a short circuit

Honestly, For the reverse image showing unsuccessfully issues, the main problems actually are the product itself problems and the producing problems. In order to avoid such a problem, editor suggest that customer should find a professional manufactures and store to buy it. And Find a professional shop to amend it.

 So we recommend the camera recorder from Sacer. It is a produced and researched by our technicians. The product has improved its defects and added some new functions to avoid the above quality problems. So it is a qualified and good one for customer.

It also has finished the full function QQC Test and confirmation for each unit.it has a 2 years full warranty. The product also has passed function at HALT test, include temperature test, aging test, drop test, vibration test, salt spray test, destructive test. So it is really a good choice for you.

SA604-HD 4" 1080P CAR DRIVING RECORDER DASH THREE LENS CAMERA RECORDER WITH G-SENSOR, which applies in all cars, such as Mercedes-Benz, Skoda and so on.

The basic data of the Vehicle Video Recorder

What do you need to know for Vehicle Video Recorder ?

We supply an conventional aftermarket replacement board. More information, contact Sacer sale team. Welcome to visit www.sacer-shop.com or contact with us by shop@sacer.com.cn for more information.

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

A call for help from Car

Preface: As a qualified driver, what we must master is that distinguish different warning signals of car. Then, find issues timely and solve it quickly. Normally, the automobile will comes up 8 types faults sounds. Then, we will introduce the heavy crash,Tapping sound,Tick, sizzle,Zoom,roar

A “crash “means that there is a heavy impact on iron, which appears a “crash” sound. It should be the engine mount damaged problems , because there is a collision with the change of engine’s speed.But it is also the suspension problems.  So please amend and replace it for your safety.  

A “Tapping sound” that it is similarity with a heavy hitting sound, but very gentle one. Please check whether you have used a low quality oil . If so, Editor suggest you purchase a high quality oil as soon as possible. Anyhow, saving money can’t be decreased from our life . 

 A “Tick” appears suddenly, it should be the driven shaft of the universal joint problems. But it might the stone hitting the tire in tire or Fan blades are loosened, which causes such problems.  

A “”sizzle’’ that is similarity with a sound from a leaking balloon. Most of the reasons are the cooling system faults, if so, it exists liquid on the bottom of the car. Besides, Tire leaks problems or The engine vacuum chamber leaks issues, which will lead such a sound.   

A heavy crash sound that is similarity with a sound knocking on door. If so, it should be the Vehicle aging problems. Bearing or engine valve damages , which also will cause such a trouble. 

 A sharp horn sound is caused by a loose fan belt or damaged worn when the driver is turning around. But , The lack of gas also will caused such a issues. 

A room that is similarity with a sound of bee. The reason should be the loose components problems, the plastic at the bottom of the engine ,metal parts or air conditioner, Compressor fixed bracket frequently appears a loose problem.  

The above weird sounds is a signal for your car. Please check and amend it timely if such a sound appears. 

Above information is what we provided today. Next, Editor will recommend SA1471-6451ZX HEATER RESISTER PEUGEOT 206,307 CITROEN XSARA PICASSO which is a good quality for customer. It also has finished the full function QQC Test and confirmation for each unit.it has a 2 years full warranty. The product also has passed function at HALT test, include temperature test, aging test, drop test, vibration test, salt spray test, destructive test. So it is really a good choice for you.   

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

The Reasons And Solutions For Brake Lights Faults

Preface: The brake lights whose function is that providing a braking signal for the latter car so that the driver behind us who can learn about the slow speed information timely, decreasing the cars accidents. It is very important for drivers. The latter car’s driver driving behind us who can’t know the former driving status if the brake lights doesn’t work well in time, which easily leads to an car accident, especially the traffic accidents caused by tailgating. So editor will share some reasons and solutions for the brake lights faults, hoping customers of Sacer can learn some beneficial skills to deal with the brake faults timely.

Editor summary the following reasons and methods for drivers.

The main reasons why the brake lightscan’t work well.

Reason 1 Filament has been burnt

Reason 2 Bad connection with the iron components.

Reason 3 The switch of brake light can’t work well

Reason 4 A circuit has been cut off

How to check it ?

Check the Filament of the brake light. If all is okay for filament, please use Screwdriver or wire to connect brake light Fire wire ports with the iron scrap parts when you step on the brake boards.

Several conditions will be appeared

Firstly, The brake lights can’t be turned on but there is a spark, indicating that there is a bad connection with iron components.

It is the brake light switch failure or a problem for the wire if no sparks.

Then, using screwdriver or wire to cut off the circuit.

A replacement or amending should be done as soon as possible if the brake lights can’t work well. Because it is the switch brake lights failure.

Find where is wrong and solve where’s problems if the brake lights can’t be turned on. Because there is a circuit cut off.

Above information is what we provided today. Next, Editor will recommend

SA8009 – TUNGSTEN BULBFOR T4,12V,1W,6LUX TUNGSTEN BULB, which is a good quality for customer.

It also has finished the full function QQC Test and confirmation for each unit. it has a 2 years full warranty. The product also has passed function at HALT test, include temperature test, aging test, drop test, vibration test, salt spray test, destructive test. So it is really a good choice for you.

More Info About Sacer, Please visit:

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

The reasons and solutions for burnt lamp

Preface: As we have said in the former article, headlight is an eye for car. But various problems also confused most of drivers. So as a qualified driver, you must know and learn some basic skills to check and repair it quickly. Saving money and improve your ability.

The essay is connecting to the former article of “ The reasons and solutions for faults of Car lights”.  Reader should read the essay if you are one of Sacer’s fans. And reader also should know that we have explained the common reasons for the problems. Editor has discussed the reasons and solutions about the fuse issues. Let’s talk about the lamps brunt issues today.

We believe that many drivers has occurred such an embarrassing trouble. No matter how short time and long time used you purchase a headlight, the bulb always appears some problems, such as bulb burnt. oh, It is really annoyed problem.

Why does it occur such a problem? How do we avoid such an issue?

Editor sum summarize the following reasons about the bulb burnt problems according to technicians checking results and feedback from Sacer’s customers. Firstly, Check the voltage of voltage regulator faults to see whether it is the high voltage problems. Secondly, Check whether it is bad-connecting problems of battery’s wires, causing a high-empty-voltage for power generator. Thirdly, check whether it exists a short circuit between generator armature and magnetic field coil. We should check whether the charging wires has a short circuit if the bulbs are burned out quickly when we turn on switches of car’s lights. We should check the generator voltage regulator to see whether the voltage has been adjust too high. If so, you should try to adjust a suitable voltage again.

For the above problems, Editor will recommend a serious bulb from Sacer, which has finished the full function QQC Test and confirmation for each unit.it has a 2 years full warranty. The product also has passed function at HALT test, include temperature test, ageing test, drop test, vibration test, salt spray test, destructive test. So it is really a good choice for you.Especially, the SA8006 – TUNGSTEN BULB FOR T5, 12V, 2W, 45LUX .It is TUNGSTEN BULB. The feedback is okay from our used customers.

More Info About Sacer, Plesale visit: More information, contact sacer sale team. Welcome to visit www.sacer-shop.com or contact with us by shop@sacer.com.cn for more information.

https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd

[sacer-shop-blog]

The reasons and solutions for faults of Car lights

Preface: a seriously problems if there is a problem for headlight of car, especially the problem comes up at night when driver is driving. It is very dangerous for us. So Editor will be written some skills to check your car lights.

Firstly, what we have to understand is that how many reasons and what factors affect the faults of headlight.

The reasons are as following,

Reason 1 Check whether the fuse problems

Reason 2 Check whether the lamp of the headlight is often burned

Reason 3 Check whether the brake light doesn’t light

Reason 4 Check whether it is the rear lamp problems

Today, Editor will analyze the first reasons firstly, know more solution about the problems, Follow us please.

Please check the fuse to see whether the fuse has been cut off in the fuse box, then, check the switch problems of the headlight if it doesn’t work when you turn on the headlight switch, far, near light.

Using the screw to connect coins of switch with knife will result the following conditions.

With the screw will be light switch switch fire line and far, near the optical junction lap, the following points in several cases. The first case, all the lights work normally, signifying that the switch of variable light has a problem. he second case , The High beam is okay but Low beam has a problem, signifying the faults between switch of variable light and head light or it is low beam problems. The third case we should know, We should check whether it is indicating light of high beam problems if the head light doesn’t work well. The fault exists from connecting wiring board to headlight if all is well, otherwise, there is a problem existing between connecting wiring board and switch of variable light. The last case,If only one headlight works well but another is not okay, signifying that there is a problem with wick of the lamp or the fuse has been burnt off. Or it doesn’t be connected well with the iron parts if the headlight has a weak lighting. If so, check the rear lamb firstly, check the filament of the lamp to see whether it has been burnt off. Please use electroprobe or screwdriver to connect the firewire of rear lamb, Scraping fire on iron.  The rear lamp open circuit if no sparks. Find the problem area and amend it. It signifies that there is a bad – connected for iron components if sparks come up.

For the above problems, sacer’s lamp has been well considered the issues. The feedback is okay from our used customers. So editor recommends SA8002 – TUNGSTEN BULB FOR T5,12V, 1.2W,10LUX,0.08A MINI BULBS, which is a high quality article. It is Mini lamp for Saab,Mercedes,Volvo,etc

Because we have finished the full function QQC Test and confirmation for each unit.it has a 2 years full warranty. The product also has passed function at HALT test, include temperature test, ageing test, drop test, vibration test, salt spray test, destructive test. So it is really a good choice for you.

More information, contact sacer sale team. Welcome to visit www.sacer-shop.com or contact with us by shop@sacer.com.cn for more information.

More Info About Sacer, Plesale visit: https://plus.google.com/+Sacer-shop https://twitter.com/SacerLtd https://www.linkedin.com/in/sacer https://vk.com/sacerltd