sanheking2021 - Tumblr blog

[sanheking2021]

Huawei P30pro Mold

https://www.sanheking.com/products/huawei-p30pro-mold/

Huawei p series mold only has one model in stock now, p30pro mold is also all in one mold, it can be used for both alignment and laminate.

 Huawei p30pro mold Usage

When you laminate screen, just put p30pro oled on the rubber mat and alignment well, make sure the edge side is put well inside thew mold, and alignment glass on top plate, then put inside lamination machine t laminate.

 Huawei p30pro mold Specifications

 Weight

0.4kg

Packing size

178*90*30cm

height

25mm

 Product Inquiry

 Related Products for Reference

[sanheking2021]

Huawei Mate20pro Mate30pro Mold

https://www.sanheking.com/products/huawei-mate20pro-mate30pro-mold/

Huawei mate 20pro mold and mate 30pro mold have a little difference, mate30pro screen is more curved, so we made the top glass alignment plate stronger with a much covered to fit the glass. 

Huawei Mate20pro Mate30pro Mold Usage

Even Huawei mate20pro and mate30pro mold have a little difference, but it's still the same method to use. You can align oca, OLED on the rubber mat, and the top plate is for locating the glass.

 Huawei Mate20pro Mate30pro mold Specifications

 Weight

0.4kg

Packing size

178*90*30cm

height

25mm

 Model:

Mate-20 Pro

Material:

Aluminum alloy + plastic ABS + silicone mat

Mold Size

177*98*24(mm)

Weight:

400g

Package size:

190*105*30(mm)

Gross weight:

435g

 Product Inquiry

 Related Products for Reference

[sanheking2021]

Heat Glass Separator

https://www.sanheking.com/products/heat-glass-separator/

The heat separate machine is mainly used to remove the glass, but now most customers also used it to remove screen and frame for Samsung edge screens, it can rotate 360 degrees, very convenient for your work. It's a universal machine which can be used for all mobile phones which is less than 7 inch.

 Heat glass separator Usage

Just put a screen on the separator and separate glass with cutting wire. We recommend you set the temperature to 80-100, higher temperature has a risk to damage the screen.

 Heat glass separator Specifications

 Weight

3kg

Packing size

32*21*19cm

Power

750W

Voltage

110V/220V

 Product Inquiry

 Related Products for Reference

[sanheking2021]

Freezer Glass Separator

https://www.sanheking.com/products/freezer-glass-separator/

This freezer separate machine can reach lowest -190 degree temperature which can be used for separat samsung glass and screen, but you must have very good skills, becuase it's not easy to control frozen time and eaisily brocken screen if you put your card inside screen when you remove glass. So we highly recommend  you to use heat screen separator.

 Freezer glass separator Usage

If you have good experience with a freezer machine, you can get this one, It can be used for separate screens for all edge screens, but it will take about 40 minutes to reach the lowest temperature before you put screen inside. and please control frozen time once you put screen inside.

 Freezer glass separator Specifications

 Weight

144kg

Packing size

71*55*115cm

Power

750W

Voltage

110V/220V

 Product Inquiry

 Related Products for Reference

[sanheking2021]

Sameking Flat Models Lamination Mold

https://www.sanheking.com/products/flat-models-lamination-mold/

If you still have a bubble problem with refurbishing iPhone flat model's screen which can't remove after put in autoclave machine for a long time, our green mold can help you solve this problem easily. We have iPhone x/xs, iPhone xs max, iPhone XR, iPhone 11, iPhone 11pro, and iPhone 11promax models, the mold is all in one mold and comes with unbend flex rubber mat.

 Iphone X/xs Xsmax Xr Mold

Iphone 11 11pro 11promax Mold

e12mini 12pro 12promax Mold

 Flat Models Lamination Mold Feature

Which not damage screen and not have bubble problem after you laminate screen with this mold. Our mold can not be only use for laminate glass and screen, it can also be used for laminate Touch Panel.

 How to Use Flat Models Lamination Mold

When you are going to use it, just put the screen and glass to the location place in the mold, to let their alignment on the mold well, then take the mold to put inside your lamination machine to start laminate, before laminate, your machine will start vacuuming to make sure there is no air inside lamination cabin and no air between the glass and screen, after vacuuming for several seconds, it will laminate, then you can get a perfect screen without any bubbles. even there are some small bubbles, you can put them inside the autoclave to remove for about 10 minutes, it's very easy to do with our mold.

 Start Your Partnership With Sameking

Leave your message for exclusive offers, Lcd screen lamination mold, and mobile phone alignment mold.

[sanheking2021]

Sameking Edge Models Lamination Mold

https://www.sanheking.com/products/edge-models-lamination-mold/

Our green mold is the most polular lamination mold in the market. Now we also make for samsung edge models, it's also easy to use like iphone mold. It's all in one mold and it can laminate glass, oca & screen.

 Samsung S8 S8plus S9 S9plus S10 S10plus S10e Mold

Huawei Mate20pro Mate30pro Mold

Huawei P30pro Mold

 Start Your Partnership With Sameking

Leave your message for exclusive offers, Lcd screen lamination mold, and mobile phone alignment mold.

[sanheking2021]

Sameking Air Compressor

https://www.sanheking.com/products/air-compressor/

Most lamination machines need to connect with air compressors because they can provide stronger and stable air for lamination machines, here it is the right choice.

 28L 32L Super Sound-off Oil Free Air Compressor

 Start Your Partnership With Sameking

Leave your message for exclusive offers, Lcd screen lamination mold, and mobile phone alignment mold.

[sanheking2021]

Sameking Air Bubble Remover Machine

https://www.sanheking.com/products/air-bubble-remover-machine/

As for bubble remover, we also call it autoclave. This mini one is the smallest and very convenent for your work.

 Mini Air Bubble Remover

Middle Size Bubble Remover

 Start Your Partnership With Sameking

Leave your message for exclusive offers, Lcd screen lamination mold, and mobile phone alignment mold.

[sanheking2021]

Mobile Phone Repair Machines and Molds

https://www.sanheking.com/products/

We have a professional R&D team and sales team, our factory in Shenzhen Longhua which is more than 700 square meters. Our lamination machines have come with the best technology and even you can change pressure on display, no need for a pressure regulator anymore. Our mini bubble remover is the mini one in the market, very good and safe to use. We have over 10 years of manufacturing experience so that we have many customers from all over the world. we built a good relationship with all customers.

 Sameking Mobile Phone Repair Machines

 Sameking Mobile Display Glass OCA Lamination Machine

Sameking Air Bubble Remover Machine

Sameking Mobile Glass Separator Machine

Sameking Air Compressor

  Sameking Mobile Phone Repair Molds and Tools

 Sameking Flat Models Lamination Mold

Sameking Edge Models Lamination Mold

Sameking Iphone Frame Clamping Mold

Sameking Universal OCA Lamination Mold

 Recommend Mobile Phone Screen Repair Machine

 Iphone X/xs Xsmax  Xr Mold

 Sameking Universal OCA Lamination Mold

 Quality control

All machines are 100% tested well before ship out.

Sameking factory outlets, we can provide free teaching video and we will often share the newest and latest model repair videos with the best skills.

Factory professional after-sale service and free WeChat video call.

We will send you videos and pictures of your products and machines to confirm with you before we ship them out.

 Packing&Delivery

Wooden box packing for lamination machine packed 100% good

We will ship out as you require like DHL. FedEx, TNT, and another door-to-door shipping service.

 Start Your Partnership With Sameking

Leave your message for exclusive offers, Lcd screen lamination mold, and mobile phone alignment mold.

 News Related to Phone Repairing