starttraning

[starttraning]

Why Is Confined Space Training So Crucial? 

Confined spaces, characterised by limited entry and exit points and restricted airflow, can pose severe risks due to the potential accumulation of hazardous gases, lack of oxygen, or other dangerous conditions. Whether it’s a maintenance hole, storage tank, tunnel, or any other confined area, understanding the principles of ventilation is paramount. Therefore, confined space training is mandatory. 

Understanding confined space training 

A confined space is much more than a small space. Occupational Safety and Health Regulations or OSHA defines a confined space as an enclosed, restricted or partially enclosed space which: 

is not designed primarily as a workplace 

is at atmospheric pressure during occupancy and 

has limited means of entry and exit 

Also, such a space: 

Has an atmosphere containing or likely to prevent potentially harmful levels of contaminants; 

has or is likely to have an unsafe oxygen level or 

Is a nature or is likely to be of a character that could contribute to a person in that space being overwhelmed by an unsafe atmosphere or contaminant 

Due to this complex definition, there have been several incidences where supervisors working in a confined space failed to identify a confined space and allowed their workers to enter and work in the area without the necessary precautions. 

Confined spaces are full of risks 

When training personnel on confined space safety, it’s important to cover topics such as recognising and understanding potential hazard signs, proper ventilation, PPE requirements and selection, pre-entry checks, controlling environmental conditions before entry, and emergency planning.

Additionally, with confined space training, employees must be trained on when and how to use specialised equipment such as fall protection gear or monitoring equipment. Companies can reduce the risks of accidents and fatalities by properly training and familiarising them with the potential hazards they could face in a confined space. 

Confined spaces often have poor or narrow ventilation, which allows hazardous gases in the atmosphere to develop quickly, especially if the area is small. The hazards are only sometimes obvious and may change from one entry into the confined space to the next.

Planning and preparing for the job is vital to ensure that work is conducted safely and efficiently. Training courses can help workers gain a greater understanding of the potential hazards that come with working in a confined space. 

[starttraning]

EWPA Yellow Card – The Certification Process and the Hazards Associated 

To become EWPA Yellow Card certified, the workers must undergo a training program that meets the OSHA standards. This includes theoretical instructions, hands-on practice sessions, and the final assessment test designed to showcase the abilities and knowledge of the workers. Completing the program, the workers will get the certified operator card. This serves as the proof of certification. The EWPA Yellow Card in Melbourne will last for three years, and it must be renewed through the recertification process to stay updated with the best practices and safety guidelines.  

Hazards Associated with Vertical/Aerial Lift Operation 

Boom lift operation includes potential hazards that operators should be careful about and trained to recognize. These include: 

Tripping 

The vertical lift operators should be aware of the stability and the possible factors that can increase the risk. These include wind gusts and uneven terrain that can increase the chances of tripping over. Whether an arm exceeds the safe angle or too much weight is attached to the basket, tipping might occur, and the operators must be careful about it.  

Falls  

Falls are a significant concern while operating a vertical lift. The workers should move cautiously while in the basket, and they must use its arm at a slow speed to help in reducing the falls. To help them further, workers must wear the safety harness attached to the basket while using the railings around the additional support.  

Collisions 

The operators of vertical lifts should be careful about the surroundings and be careful while operating them to prevent accidents from happening. With EWPA Yellow Card training, you will be aware that when moving the lift, both the base and arm should move, increasing the risk of colliding with the equipment or the structures on the ground or in the air. Also, you will become aware of what is around them while operating the boom lift for avoiding accidents.  

Electrical Hazards 

Since the boom lifts are frequently used for aerial electrical work, it poses a higher risk of electric shock for the workers near the power lines or other sources of electricity. With the EWPA Yellow Card in Melbourne, you will be aware of the appropriate safety precautions.  

[starttraning]

Excavator License Price in Melbourne – The Benefits of Excavator Certification 

When you have official, nationally recognized certification to operate excavators, the chances of employers hiring you will increase because it proves your abilities. Innumerable workers in the construction sector don’t have certificates.

Therefore, it is imperative to know the details of the excavator license price in Melbourne and get one. Also, it has be identified that there is a shortage of qualified excavator operators. Thus, with an excavator license in Melbourne, you shall become highly attractive to employers. Here are the reasons to opt for an excavator license in Melbourne.  

Increased Safety: 

The certification course will cover the safety practices in the workplace that allow standardized levels of health and safety. Also, you shall be aware of how to operate the excavators with absolute safety.  

Skill: 

Once you know the excavator license price in Melbourne, it is better to get one because it will increase your skill. Construction is a huge and ever-present industry. Taking the certification course will allow you to learn all you need to know about operating the excavator. Getting the qualification will demonstrate your proficiency.  

Confidence:

 Getting the excavator license in Melbourne will offer you higher confidence because you will know that you have the capability to operate a 360-degree excavator. Not only this, but the employers will also have confidence in your skills, and it can lead to you being a better candidate for long-term positions and a better career.  

An excavator also has a wide array of responsibilities and plays a crucial role in the safety of a job site where the excavator is in operation. The excavator license in Melbourne is developed specifically for workers tasked with excavator operation, and it covers the necessary knowledge for the worker to safely operate a wide array of excavators.

The training program also helps excavator operators and the entire team to understand the different facets of electric stackers and the safety requirements needed at the work site. Also, it focuses on the roles and responsibilities of each of the different workers.  

[starttraning]

White Card Class in Melbourne – The Importance of White Card Training 

If you have plans to make a career in the construction sector, you need to obtain white card training to start your career graph, whether you are an owner or a builder. The training will cover the crucial safety aspects of the construction sector. The white card class in Melbourne is mandatory because it ensures safety practices within the construction site. Therefore, it enables the site workers, supervisors, and other people on the construction site to stay safe while working. It offers the basics of construction safety and provides the necessary knowledge. Thus, the chances of an accident can be ruled out.  

Here is the Importance of White Card Class in Melbourne 

The White Card Class in Melbourne is an approved training to make sure that the workplace is completely safe. The people working there are well-informed about safety. The training should be followed in the building industry per the Occupational Health & Safety Legislation.  

White Card Class in Melbourne is a must for the builders and owners planning to develop their first home or building according to the safety measure.  

The White Card training also helps to enhance and modify the safety protocols in a construction site to make a construction site a safe place to work.  

White card training prepares everyone for the future working environment. How? When you choose a White Card Class in Melbourne, you shall experience simulations of the real working environment. Applying theoretical knowledge helps you in getting a feel for the job. Therefore, it makes things relatively better for those planning to get a job in the construction sector. They can deal with the risks and dangers in a much better way. Other than that, it also eases the pressure of starting a new job in the construction sector.  

Finally, it helps you to learn something new. The White Card Class in Melbourne is needed for all, whether you are a veteran or new to the industry. Enrolling for it introduces you to new facts regarding the construction sector. The more knowledge you have, the easier it will be for you. Thus, you can successfully perform your role.  

[starttraning]

Are machine operator training courses so essential for professionals?

Heavy equipment operators are essential in construction, manufacturing, and many other industries. They are responsible for operating heavy machinery, such as bulldozers, excavators, loaders, and cranes, to move earth, debris, and other materials. A heavy equipment operator, also known as an operating engineer, operates a range of technical and complicated machinery to perform thousands of tasks. Heavy equipment is employed throughout the construction process and building maintenance in the future. Machine operator training courses can help professionals in the industry to operate machines safely and improve productivity. 

What is a heavy equipment operator school & training program? 

For those interested in pursuing a career as a heavy equipment operator, a specialized training program may be necessary to obtain the required skills and certifications. A heavy equipment operator school and training program offers hands-on experience with various machines, including bulldozers, excavators, and cranes. 

Besides mastering the technical aspects of operating heavy equipment, these programs teach students essential safety protocols and best practices. Upon completion, graduates are often equipped with the tools and credentials necessary to gain employment in various industries, from construction to mining. 

Benefits of attending a machine operator training course 

Heavy equipment operator schools provide individuals with the necessary skills to operate heavy machinery. Attending these schools offers a range of benefits, such as increased job opportunities and income potential. 

Students at these schools receive hands-on training with various heavy equipment, including bulldozers, excavators, and cranes. Machine operator training courses enable them to become more proficient in operating the machinery and, therefore, more desirable to potential employers. 

Additionally, attending these schools can lead to certification, which adds credibility to a heavy equipment operator's resume. The benefits of attending heavy equipment operator schools cannot be overstated, making them an excellent investment for anyone looking to enter or advance in the industry. 

Tips for choosing the right training program 

Choosing the right heavy equipment operator training program is crucial to a successful career. With so many options available, deciding which one is perfect for you can be overwhelming. 

Looking for a program that provides hands-on training, safety protocols, and certification is essential. Additionally, consider the institution's reputation and the instructors' experience. 

Remember to consider the program's cost, duration, and location. Investing in the right training program can give you the skills and knowledge you need to excel in the heavy equipment industry. 

[starttraning]

White Card Training in Melbourne – The Details You Ought to Know 

It is crucial to have a construction induction training course, also known as the white card training in Melbourne. If you are planning to get a job in the construction sector, white card training is imperative. You cannot avoid it. Also, it increases your chances of getting better employment in the construction sector. You can take white card training in Melbourne online or face-to-face. However, it is better to take the face-to-face courses. Make sure that the training is approved by a Registered Training Organization. If you opt for training not approved by an RTO, it will not be valid. Only construction induction training that is undertaken with an approved RTO will allow you to get a White Card which will increase your employability.  

How to Confirm the Right Course? 

When you register to complete the white card course in Melbourne, make sure that you are booking the right course. Here are the following things that you can do. 

Confirm with the RTO the course code for training. Prepare yourself mentally to adhere to the safety rules while working in the construction sector.  

It is better to choose the course in a face-to-face learning environment.  

You have to offer a photographic ID when you are registering for the course. 

You shall receive a certification for completing the construction induction.  

If the course that you are choosing doesn’t meet all the criteria, chances are, the course will not result you being issued with the white card in Melbourne. Thus, the white card training in Melbourne will not be of any use, and it will not improve your employability opportunities. Site managers, supervisors, surveyors, tradespeople, and laborers need a white card. Also, people with access to operational construction zones (unaccompanied or not directly supervised by an inducted person). The workers whose employment requires them to routinely enter the operational construction zones also need white card courses in Melbourne. Remember, the course will become invalid if you don’t carry out any construction work for two or more consecutive years.  

[starttraning]

What Role Does Confined Space Training Play? 

Start Training

A confined space is either enclosed or primarily enclosed and has a reasonably foreseeable danger to workers of fire, or explosion, asphyxiation or drowning. It may be small and restrictive place for the worker, or it could even be farther and larger such as a grain storage silo with hundreds of cubic metres of capacity.

That is why confined space training is so necessary. Once you have found out whether your entry is defined as a confined space or not, it is reasonably practical to accomplish your task without entering the area, you should establish a safe work system. 

Establish Safety Plans for Every Confined Space Worksite 

A confined space safety plan should encompass an assessment of the workplace layout, surroundings, potential dangers, entrance and exit protocols, proximity to emergency services, and additional pertinent factors. The blueprint should detail job-specific strategies for different safety roles and responsibilities, training and inspection protocols, and warning signs of potential threats.

Having comprehensive and proficient safety plans aid in preparing your team to respond to unexpected situations with calmness and efficiency. If you’re ever unsure of your safety plans, it’s essential to enlist a professional confined space rescue team for a safety consultation. 

Thoroughly Examine Each Piece of Equipment 

Before deployment, a meticulous inspection of every piece of equipment in your load is crucial. Should any evidence of wear and tear show during the examination, the item should be promptly withdrawn till it’s fixed or replaced.

Establishing a consistent and rigorous inspection routine guarantees that all equipment is serviced or swapped out well before any foreseeable need. Confined space training teaches all these crucial aspects. 

Assess the Confined Space Worksite and Adapt Accordingly 

It’s essential to compare the actual confined space worksite to how it was evaluated initially in the safety plan you created. Bad weather conditions, rush-hour traffic, or unforeseen circumstances can affect your rescue plan.

Additionally, it’s essential to conduct air sampling to detect any hazardous gases before entering the confined space. If you encounter a situation where the site conditions do not align with your safety plan, adjust and adapt accordingly! 

[starttraning]

Everything About White Card Class in Melbourne 

Anyone that wants to work in the building and construction industry of Australia must secure a White Card, and to get that, individuals need to attend the White Card Class in Melbourne. The White Card is a mandatory requirement for Australian construction workers. It proves that an individual has undergone the necessary training and certification for such a role. The training includes learning the basic risk management principles in the construction industry and injury and illness prevention training sessions. It tackles selecting and fitting the personal protective equipment (PPE) used for work. Lastly, it will also cover the Occupational Health and Safety (OHS) legislative specifications in Australia.

No worker can secure a position on a construction site without a White Card. It will be applicable for all roles in a construction site, including labourers, tradespeople, site managers, surveyors, and supervisors. Most employers prefer applicants to complete the face-to-face. To qualify for a White Card, one must complete the general construction induction training with an RTO. The instructor will conduct presentations, animations, activities, and videos throughout the course. Also, there will be assessments and tests at the end of the day where participants should pass to secure a card. Upon successful completion of the course, the White Card or a Statement of Attainment is issued.

Having a card will permit a person to work on a construction site throughout Australia. The certification will be valid unless you don’t work in the construction industry for two years. The White Card Class in Melbourne is available for anyone intending to work in the construction industry. However, it does need a functional grasp of English, both in communication and comprehension. You can opt for relevant support and assistance upon request from the RTO provider. White Card Course in Melbourne includes a clear overview of safety hazards at work. More importantly, it will teach awareness on responding and coping with different emergencies that lead to lesser work-related injuries.

A White Card Course in Melbourne is more than a mandatory work requirement. It ensures workplace safety. Completing the course will raise awareness of the best practices to help eliminate the hazards and risks resulting in fatalities and injuries.

[starttraning]

Why Is White Card Training In Melbourne So Crucial For Construction Professionals?

The White Card test is an Australian certification programme that allows persons to work in the construction industry. The test checks for the skills needed to work on a construction site safely and effectively. 

To be eligible for a white card, you must demonstrate that you have completed a general induction training course validated by the Australian Skills Quality Authority (course reference CPCCWHS1001 – Prepare to work safely in the construction industry). With white card training in Melbourne, you can become industry-ready. 

Elements a white card test covers 

The White Card test covers a wide variety of topics, including: 

Occupational health and safety regulations, 

Recognising and mitigating potential hazards, 

Selecting and using appropriate personal protective equipment, 

Following established protocols for ensuring worker safety, 

Fostering open lines of communication on the job and minimising environmental impact. 

What Exactly Is A White Card?  

A white card, a general construction induction or construction safety card, is a mandatory qualification. Anybody who wants to enter a building site must meet this necessary criterion. The term “white card” also refers to one-time health and safety training that grants certification for the construction safety card. 

Before beginning work, all builders, contractors, and other industry experts must complete this course. Only an authorised Registered Training Organisation (RTO) may provide you with a construction induction training course. 

How Do You Obtain One? 

If you are an aspiring professional planning to work in the construction industry, you must qualify for this course to get qualified. After white card training in Melbourne, you must have this card to enter any construction work site. 

According to the country's National Code of Practice for Induction for Construction Work, the following people require this card: 

Workers in construction, contractors, site managers, supervisors, surveyors, and tradespeople 

Any employees who regularly enter operating construction zones 

Anybody who needs to enter (unaccompanied or unsupervised) operation construction zones, including migrant labour 

Everyone working directly in Australia must obtain a white card, regardless of how good or experienced a migrant construction worker is in their home country. 

If you wish to get the White Card, contact an accredited training provider. They will ensure that you have everything necessary to pass certification examinations. They will also give you with the essential information and aid during the procedure. 

[starttraning]

Confined Space Training – What Should You Know About It?

A confined space is an area that has a small opening with a higher chance of injury. Confined spaces include vessels, tanks, silos, storage bins, vaults, hoppers, manholes, pits, tunnels, equipment housings, and more. Confined space training provides knowledge and awareness in building experience through the overview of confined space entry-related safety requirements. The confined space training and personal certification program support organizations and help them fulfil their obligations to meet the legal and operational control requirements. The training aims to offer the candidates the right knowledge of the hazards of working in confined spaces. Also, learn to safely use tools and equipment, control risks, and develop emergency procedures. 

What are the benefits of Confined Space Training?

Upon the successful completion of the confined space training program, the participants will have the following experience:

The detailed concept of a confined space and how to operate inside it.

The legal responsibilities while working in confined spaces.

The best and safest way to enter and exit the confined space.

How to work safely in confined spaces.

Rescue procedures.

Permit to work on the system. 

The confined space training will outline the skills and protocols for safe entry into confined spaces, including risks, hazards, and precautions. Working in confined spaces might kill or cause injuries in industries, ranging from a complex area to simple storage. They include not only the people working in the confined space but also the managers, supervisors and other individuals associated with confined spaces without adequate training. Therefore, an employer must ensure OSHA confined space training certification for every employee.  The training must ensure that the workers are competent in all aspects of confined safety. The employer should adjust their confined space activities accordingly to maintain compliance (based on any issues revealed during training). Every employee’s name should be contained within the certification, along with the training dates and the trainer’s signature. Both the employees and anyone authorized to represent them must have access to the certifications as desired. 

[starttraning]

Everything to Know about the Boom and Scissor Lift Certification in Melbourne

Boom lifts are one of the most important and popular type of equipment that have been in use on the construction site for years. The lift’s versatility makes it an amazing choice for multiple tasks that must be completed up off the ground. However, the workers need special training to operate this type of aerial lift. To ensure the safety of the workers, boom lift operators must be certified by a trusted source. To get the boom and scissor lift certification in Melbourne, you must be aware of the boom lift basics. Here is what you ought to know.

Boom Lift Basics

Boom lifts are also known as cherry pickers, and they include a wheeled base, a hydraulic arm, and a basket at the top. On some boom lifts, the arm can extend or bend. The workers standing in the basket can use the controls in rotating or moving the arm. Once they are in the correct position, they can complete the work while in the basket. Boom lifts are useful for a wide array of applications. You shall often see utility workers using them on construction sites. Boom lifts can be used for painting, making repairs on large machines or also for the renovation of the exterior of the building. They can also be used for camera platforms for filming, and for emergencies like firefighting. The name “cherry picker” comes from one of the original uses of the boom lift. It was the harvesting of fruit in orchards.

Because of the safety risks of using a boom lift, all the operators must be trained in boom and scissor lift certification in Melbourne. Training of this type of machine includes several parts like instructions on how to use the controls. The workers learn about the safety risks, and they will know how to avoid them. Training will also include the maximum load capacity and it explains how to perform the daily inspections. Also, when it comes to boom and scissor lift, the workers must be trained periodically, especially when they must be accustomed to the use of new aerial lifts.

[starttraning]

What Are The Benefits Of A White Card Training Course In Melbourne?

A white card or construction induction card (previously known as a blue card) is necessary for almost every trade. The government has made it compulsory to obtain one before being allowed to work on a construction site. This ensures that everyone on site is familiar with construction site codes of practices and, in turn, minimises risks of accident or injury. Therefore, workers must opt for white card training in Melbourne.

What is a White Card?

The White Card proves you have completed a General Construction Induction course. This nationally recognised safety induction card provides an understanding and competency of Occupational Health and Safety (WHS), hazard awareness and the potential risks in a construction environment. You will also learn skills such as safe work practices, including interpreting safety signs and using safety equipment, in a white card course in Melbourne. The card does not expire, although you must retrain if you haven’t worked in the construction industry for over two years.

Benefits of white card training

The benefits of completing a white card course are numerous. Workers can enter a construction site and start work by completing the training. They will have the necessary knowledge and skills to work safely in the busiest construction industry and understand the risks and hazards associated with construction work.

After completing the training

After completing your course on white card training in Melbourne, your RTO will issue a statement of completion. Additionally, the statement is valid for 60 days until your competency card arrives. And all the cards issued are tracked, ensuring the workers are trained and safe.

Are you looking for white card training in Sydney? A reputed registered training organisation (RTO) that provides white card training in Sydney for competitive prices is worth choosing. It can offer a diverse range of Workplace Health and Security Courses too. With our expert guidance and training, you can ensure that you have the necessary knowledge and skills to work safely in the construction industry and be successful in your career.

[starttraning]

If you plan to work in the construction industry, you need a White Card. Whether you are an owner, builder, or construction worker, you need a White Card Course in Melbourne. 

[starttraning]

If anyone asks what skid steers are used for. The answer is- for several tasks. Skid steers can help with several studies and a wide range of functions.

[starttraning]

What Does Confined Space Training Include?

Confined space training is training to avoid safety hazards in a confined space. Confined space accidents are a major concern in different industries. Confined space training outlines the skills and protocols for safe entry into confined spaces, including the risks, hazards, and precautions. The confined spaces include tanks, pits, well, sewers, tunnels, pipes, silos, boilers, etc. Working in a confined space can cause injuries in any industry, whether working in simple storage or ranging from simple storage to involving complex areas. Confined space training is not only for people working in the confined space but also for the managers, the supervisors and other individuals associated with confined spaces that don't have training.

The benefits of confined space training

Confined space training helps to ensure safe working practices in confined spaces. 

Familiarization with the hazards of a confined space and the risks involved with the control measures.

Alerting the evacuation team in case of any emergency in the confined space.

Understanding the roles and responsibilities of the attendants, supervisors, entrants, and others.

Identifying the precautionary measures for the confined space entry

Importance of monitoring the methods, exposure limits, and ventilation

Everything about the rescue operation during the confined space

Identifying the Requirements

The business needs

Current competencies

Training methods

Effectiveness

The cost

Understanding why you need confined space training will help prepare you for different working conditions. It increases the awareness of the hazards they can expect in a confined space. Raising the workers' awareness of a potential hazard the workers will have higher caution and lesser injuries. Also, when you get confined space training helps determine the risks associated with a specific type of confined space and helps workers make better decisions regarding the equipment needed to ensure safe working conditions. Determining the potential risks beforehand also allows for emergency procedures to be put in place. Confined space training informs the workers about the legal obligations to have proper qualifications and certificates to work in a confined space. When you are aware of these obligations, helps to ensure a safer working environment.

[starttraning]

Why Choose Online White Card Course in Melbourne?

If you plan to work in the construction industry, you need a White Card. Whether you are an owner, builder, or construction worker, you need a White Card Course in Melbourne. Getting the training is not always easy, especially when you are working at another job and seeking the training at the same time. Most employers will not allow you to take time off from what you are doing while you do what you need to do to secure employment in another field. This is one of the reasons why you might want to seek online White Card Training in Melbourne. 

Ability to take the training on your own time – If you get an online white card course in Melbourne, it will allow you the time to get the training you need but in your own time and space. Online training is offered seven days a week and 24 hours a day; you can take the training in your spare time. Thus, you can do all your office work, and there will be no chance of jeopardizing your current job. You can take the training early in the morning, late at night, or any time in the evening. 

On the other hand, if you choose the classroom White Card Course in Melbourne, you must do it according to the classroom schedule. Nothing is wrong with that, but it won't be easy to align your free time with the time when the training is offered. This will not be an issue if you take White Card Course in Melbourne. 

No Travel Expense – This is another benefit to getting the online White Card Course in Melbourne. You won't have to bear any travel expenses. Offline White Card Course in Melbourne is offered at particular locations only. Therefore, it means you must travel to get the training. With the online White Card Course in Melbourne, you can take the training from your home. Thus, it means there is no travel expense to be added to the cost of the training. Therefore, you can save money by getting an online White Card Course in Melbourne. 

[starttraning]

Know in Details About White Card in Melbourne

Undoubtedly, working in the construction and building industry is a good career choice. The sector has seen continuous growth over the years. While it has experienced a drop due to the COVID-19 pandemic, it has picked up the pace and will continue to grow till 2025 and beyond. Thus, it means that the building and construction industry will see a lot of opportunities in the coming years. The pay is good too! 

Whether a labourer or an engineer, you can expect to receive a minimum wage of up to $140,000 more per year. The best thing is that anyone from any background can get a job in the construction industry. Prior experience is not needed; however, it is preferred. Of course, you need construction training relevant to the job you want. In addition, you shall need the right safety qualifications. For instance, if construction includes working in heights, you will need a White Card in Melbourne that permits you to work in heights. 

What is a White Card in Melbourne?

A White Card in Melbourne is like a construction safety passport. It shows that you are credible to work in the construction sector and are familiar with workplace health and safety requirements. The construction professionals who have a White Card are expected to:

Identify and describe the legislative rights and responsibilities for workplace safety and health.

Describe the systems approach to workplace health and safety.

Have a clear idea of the risks and hazards defined in the HSWA.

Why do you need a White Card in Melbourne? 

Working in the construction sector exposes you to health and safety risks. Some workers have to enter confined spaces to perform their jobs, while others might need to climb skyscrapers. In addition, many building and construction professionals have to operate or ride heavy machinery. They include mobile elevating devices and platforms like self-propelled boom and scissor lifts. Without the right health and safety training, construction professionals will be at high risk while they are at work.