#ASTM A790 Duplex 2205 Seamless Pipe

[namanpipe-blog]

Uncovering the Power of Our Duplex Steel Pipes

Our business specialises in supplies needed for different chemical processing systems. These goods have outstanding resistance to erosion and corrosion. In addition, they demonstrate extraordinary mechanical qualities and subline strength in many settings.

The ASTM A789 Tube is manganese, silicon, nickel, chromium, molybdenum, phosphorus, and sulphur. These fixtures fall under many classifications. Pipe components that are constructed in seamless and welded configurations to suit various situations fall under the ASTM A789 UNS S31803 grade.

They are propelled to have higher oxidation and corrosion resistant qualities under stress-induced situations by the ASTM A790 pipe. Because of their many characteristics, the piping modules are sought after in a variety of applications. Austenitic and ferritic in microstructure, ASTM A790 UNS S31803 Pipe can be built in seamless or welded variants.

Hot steel billets are precisely shaped into Duplex 2205 plate by passing them through extruded metal, resulting in a single piece of metal. These pipes are incredibly strong and have an exceptional capacity to support loads. A more affordable option to seamless pipes is a Duplex 2205 Welded Pipe. These pipes are made by rolling metal, then joining the pieces together with a normal welding technique. Although they lack the seamless pipes' strength, they are incredibly dependable.

The design of a Duplex 2205 Round Barhas a circular cross-sectional area. Because of their excellent chemical makeup, these bars exhibit improved resistance to oxidation and corrosion. A thin straight bar called the Duplex 2205 Rod gives various components stability and support.

A short piece of pipe with one end flared and the other square cut and welded to pipe grade of the same nominal sizes is how the Duplex Stub Ends are made. We are a stockist of Duplex Fittings, meaning that we have fittings in various sizes and forms so that they can be utilised for various purposes. We are the leading duplex fittings manufacturers.

Duplex flanges manufacturersprovide stability and support for a variety of applications where there is a high media flow. A duplex plate composition as a result, the plates have strong resistance against reducing and corrosive media. These plates offer various applications of exceptional strength and support. Standard specifications for materials used in pressure vessel grades and for general applications are covered by the ASTM A240 Plate. A Duplex Sheet is one that is thicker than 0.5 mm but less than 6 mm.

Our company specialises in providing excellent corrosion and erosion resistant supplies for various chemical processing systems. Improved oxidation and corrosion resistance are features of the ASTM A789 Tube and A790 Pipe, which are available in a variety of seamless and welded configurations.

[steelflanges-blog]

ASME 36.19 ASTM A312 TP904L SMLS Pipe 1/2 Inch SCH10S

FOB PriceUSD 8,00- 30,000/Piece

PortNingbo or Shanghai Port

MOQ1 Piece/Ton

Supply Ability1000 Tons Per Month

Payment TermsL/C,T/T,Western Union,MoneyGram

PackagingSeaworthy plywood cases or pallets

Delivery7- 20 days

Quick Details

 Thickness: SCH10S

 Section Shape: Round

 Outer Diameter: 1/2" (DN15)

 Place of Origin: Zhejiang, China (Mainland)

 Application: Construction, oil, gas, etc

 Technique: ERW

 Surface Treatment: Pickled, 2B, No.4, BA, Hairline, Mirror

 Material: 904L Stainless Steel, etc

 Standard: ASTM, ASME, etc

 Type: 904L SMLS Pipe

 Lenth: 3M

 Brand Name: Yaang

Packaging & Delivery

Packaging Detail:Standard export packing or as per requestDelivery Detail:7 - 20 days

Specifications

ASME 36.19 ASTM A312 TP904L SMLS Pipe

1. Seamless

2. Thickness: SCH10S

3. OD: 1/2" (DN15)

4. Lenth: 3M

China SMLS Pipe Manufacturer www.yaang.com offers ASME 36.19 ASTM A312 TP904L SMLS Pipe, 1/2 Inch, SCH10S.

ALLOY 904L is a multipurpose highly corrosion resistant stainless steel. The chromium, nickel, molybdenum and copper content of the alloy renders it suitable for many applications dealing with medium to corrosive environments. It is particularly useful in sulphuric acid applications where the range of concentrations and temperatures in which it can be used, is wider than that for grades such as 317L and duplex grade ALLOY 2205. This is in part due to the copper content of the alloy. In industrial grade phosphoric acid environments, the performance of ALLOY 904L / 1.4539 is again superior to that of 317L stainless steel and, at higher temperatures, duplex grade ALLOY 2205 as well. Performance in phosphoric acid is strongly influenced by the level of impurities present. The Alloy also has useful resistance to organic acids such as formic and oxalic acids. With respect to localised corrosion, the high nickel content of ALLOY 904L / 1.4539 makes it more resistant to stress corrosion cracking than other common austenitic stainless steels whilst the levels of chromium, molybdenum and nitrogen impart excellent resistance to pitting and crevice corrosion.

Composition ranges for 904L grade of stainless steels

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

Cu

904L

min.

max.

-

0.02

-

2

-

1

-

0.045

-

0.035

19

23

4

5

23

28

1

2

Tolerance

a) Outer Diameter:  +/- 0.1mm

b) Wall Thickness: +/- 0.02mm

c) Length: +/- 6mm

Surface

180G, 320G, 400G Satin / Hairline 400G, 500G, 600G or

800G Mirror finish and so on.

 Standard 

 AISI, ASTM, DIN, EN, GB and JIS

ASTM A213,ASTM A312,ASTM A269,ASTM A778,ASTM A790

DIN 17456,DIN 17458

JIS G3459,JIS G3463 etc

Material

300series: 301,302,303,304,304L,309,309s,310,310S,316,316L,316Ti,317L,321,347

200series: 201,202,202cu,204

400series: 409,409L,410,420,430,431,439,440,441,444

Others: 2205,2507,2906,330,660,630,631,17-4ph,17-7ph, S318039 904L,etc

Duplex stainless steel: S22053,S25073,S22253,S31803,S32205,S32304

Special Stainless Steel: 904L,347/347H,317/317L,316Ti,254Mo

Application range

TP904L SMLS Pipe is widely used in below fields:

1).Petroleum,Chemical enterprise, superheater of boiler, heat exchanger

2).High temperature resistant transmission fluid pipe in power station

3).Ship with pressure pipe

4).The exhaust purification devices

5).Construction and ornament

Main market

We have frequenter customers from 

Europe: Germany,Netherland,Russia, Finland,Czech,Ukraine,Italy,Spain,Poland

Middle East: Iran,UAE,SA,Iraq,Qatar,Isreal,Jordan,Bahrain,Kuwait

South America: Brazil,Chile,Peru,Venezuela,Uruguay,Argentina

Africa: Egypt,South Africa,Nigeria

Central&North America: Mexico,US,Canada,Costa Rica

South East Asia and Pacific: Japan,South Korea,Singapore,Thailand,Indonesia,Australia

Delivery conditions

Annealed, pickled & polished.

Note

We can produce other standard as the customers’ requirement.

Typical physical properties of grade 904L stainless steels

Grade

Density(kg/m3)

Elastic Modulus(GPa)

Mean Co-eff of Thermal Expansion (µm/m/°C)

Thermal Conductivity(W/m.K)

Specific Heat 0-100°C(J/kg.K)

Elec Resistivity(nΩ.m)

0-100°C

0-315°C

0-538°C

At 20°C

At 500°C

904L

7900

190

15

-

-

11.5

-

500

952

Application of ASME 36.19 ASTM A312 TP904L SMLS Pipe 1/2 Inch SCH10S:

Food processing equipment, particularly in beer brewing, milk processing & wine making.

Kitchen benches, sinks, troughs, equipment and appliances

Architectural panelling, railings & trim

Chemical containers, including for transport

Heat Exchangers

Woven or welded screens for mining, quarrying & water filtration

Threaded fasteners

Springs

Others

 Other Features:

1) Chemical and Physical characteristic: durable, corrosion resistant and high-temperature resistant

2) We also produce pipes with special specifications according to customers’ requirements;

TP904L SMLS pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.

TP904L SMLS pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process does not include any welding, seamless pipes are perceived to be stronger and more reliable. Historically seamless pipe was regarded as withstanding pressure better than other types, and was often more easily available than welded pipe.

TP904L SMLS pipe's Marking & Packaging

While marking we choose a specific item number as well different color shade to differentiate steel grades. We mark TP904L SMLS pipe as needed with the most suitable & visible marking technique.

Packaging is an integral part of the product. It guarantees that the TP904L SMLS pipe is delivered to the customer in the required quality. For smaller orders the size of the TP904L SMLS pipe bundle depends on the no. of Tubes ordered, for larger orders the tubes are packed into individual bundles and in such a way that the maximum weight of 4000kg per bundle is not excedded. Bundle tied down with steel tape. Bundle tied down by steel strap underlaid by tapaten.

We can also provide TP904L SMLS pipe wooden box packing, cardboard boxes, plastic wrapping, using hardened paper with PE meshing (used as protection against mechanical damages of tubes), into tapaten and polyethylene sheet etc.

Where can we find the high quality TP904L SMLS pipe.

You can visit this website: www.yaang.com (Yaang Pipe Industry Co., Limited).

If any inquiry, please feel free to contact by email sales@yaang.com

Related products:More>>

High Pressure 302 Stainless Steel Pipe

ASTM A790 UNS32750 GR2507 Welded Pipe SCH80S DN400

SUS Standard Seamless Stainless Steel Pipe For Shipbuilding Austenitic Cr17n6Ni5N

ASTM Large Diameter Seamless Steel Stainless Pipe For Water , Schedule 80 TP317 TP317L

[freeminimaps]

Unisteel & engineering

We manufactured, export & supply Duplex 2205 pipes in accordance with international ASTM standards Seamless Pipe ASTM A790 UNS S31803 / S32205, Welded pipe ASTM A928 UNS S31803 / S32205 Our UNS S31803 / S32205 Duplex Steel Pipes are stronger and harder as compared to normal steel. However, these UNS S32205 Duplex Steel Pipes are not as challenging to corrosion as stainless steel.Duplex 2205 Pipe is an austenitic-ferritic stainless steel used for corrosive environments and is capable to resist localized corrosion such as pitting, crevice corrosion and stress corrosion cracking.

Unisteel & engineering was originally published on Business directory and remarkable travel blog!

[siddwalker-blog]

Duplex 2205 Pipe Supplier

Duplex 2205 Pipes of best quality and resistance are supplied and exported by Siddhagiri Metals and Tubes. Duplex Stainless Steel 2205 Pipes are available in sizes ranging from NB up to 36 inches, OD up to 914.4 mm. Duplex Pipes conform to ASTM A790, ASME SA790, UNS S32205 and UNS S31803Standards. Our products are available in Indian, Japanese and European Origins. We are a globally renowned ISO 9001:2008 Certified Company. With a decade of experience in the field, we can provide UNS S32205 Pipes according to your applications and can fulfill your exact requirements. We have a team of professionals that work throughout the development of the company and are ready to help you with your order.

Siddhagiri Metals and Tubes specializes in Duplex 2205 Seamless Pipes and Duplex 2205 Welded Pipes. Email us your requirements at export@siddhagirimetals.com.

[stainlesssteelpipesuppliers-blog]

Stainless Steel Pipe Suppliers

Dear Friend Kcm Special Steel Co., Ltd we are Manufacturer of Stainless Steel Pipe and Tube and Fittings ( elbow, tee, Reducer, Cap, Cross, Flange ) in China wenzhou city 1. Material: 201, 202, 301, 304, 304L, 310S, 316, 316L, 316Ti, 317, 317L, 321, 347,904L Duplex SS, S31803 / 2205, S32750 / 2507 , S32760 Monel400 Inconel600 Incoloy800 Alloy20 Alloy28 Nickel Alloy. Welded Seamless Pipe Supplier Manufacturer 2. Product specification: OD 2 - 1600mm x WT0.8 - 60 mm Square & rectangular. 3. Executive standard: Astm A312m, Astm A269, Astm A213, Astm A790, Astm A789, Astm A815, ANsi B16.9, Ansi B16.28, ANSI B16.11, Jis B2311, Jis B2312, Jis B2313, Din2605, Din 2606, Din 2615, Astm A511, Astm A554, Jis G3463, Jis3446, Jis3448, Jis3459, Din17456, Din17458, Din2462, GB14975, Gb14976, Gb13296 We also have large qty of ready stock, it can support ur urgent project. Contact : Mr. Bob Lee mob & whatsapp : + 86 - 13758498349 web : www.nickel-steels.com www.duplexstainlesssteelpipes.com email : bobo_lee2@hotmail.com skype : bobo.lee2

[namanpipe-blog]

Stainless-steel pipes discussed in detail.

Stainless steel, which was invented over a century ago, is now the most commonly used and admired material in the world. As a result of stainless steel’s excellent corrosion resistance, chromium content may be used to improve certain properties. Reducing acids and defending against pitting attacks in chloride solutions may be shown to be resistant. For SS tubes, it’s the best material because of its low-maintenance and recognizable gloss.

 There are a range of uses for Duplex 2205 Pipe Fittings, including some that provide advantages to the end user. Duplex 2205 Plate suppliers have been outstanding in their treatment of customers.

 It is actually a steel alloy with strong iron, nickel, and chromium percentages. Duplex 2205 Round Bar seems to be a long-term option.

 As a result, stainless steel has indeed been around for a long time since it is corrosion resistant as well as performs better in challenging environments. Steel that resists corrosion was initially identified as a combination of iron and chromium throughout the late 1800s. As a result, stainless steel tubes made from this material are found throughout industry. Manufacturers of duplex fasteners have been around for a long time. Today, these pipes are preferred by the vast majority of individuals.

Advertisements REPORT THIS AD

 Different alloys have varying chemical compositions, which explains the enormous variety on the market. Welded and seamless stainless steel tubes are both common forms of the material. A typical manufacturing organization often makes use of stainless steel tubing. ASTM A182 F53 have the finest outcomes.

 There are many different kinds of stainless steel pipes.

 Let’s have a look at the numerous applications for stainless steel tubes.

 Seamless

 It was able to withstand temperatures and pressures ranging from very hot to extremely cold. All the tanks have been destroyed. There are numerous sources for ASTM A182 F60 pipe. Mechanical and engineering firms also make use of them. Since this testing is done to ensure great quality guarantee, it is adaptable before it reaches the client. The cost of En8d’s materials is actually quite reasonable.

 Tube Welded Together

 Welded pipes can be used in a wide range of industries because of their versatility. When it actually comes to assisting excellent corrosion resistance and thus opposing pressure, they are much more expensive. India is a fantastic place to look for ASTM A182 F55. Welded tubes are very light thanks to the evident substance they’re made of. They are far more cost-effective than other pipe methods when it comes to paying for them. A pricing list for ball valves may be accessed online. Super Duplex 2507 Pipe is fantastic.

 Compression and expansion joints for pipes and tubing

 As part of a pipeline system, pipe flanges are indeed an essential component. Threaded, semis, lap joints, and blind tube flanges are just a few of the many varieties available. Sizes in millimetres of stainless steel pipe are hefty. A higher-quality item with the greatest degree of reliability is guaranteed by their use of long-lasting and durable materials. India’s Cold Drawn Tubes makers are doing an excellent job. ASTM A790 Pipe suppliers in India are fantastic.

[duplex-stainless-steel-supplier]

[steelflanges-blog]

ASTM A312 TP347H Seamless Stainless Steel Pipes DN250 SCH80

FOB PriceUSD 8,00- 30,000/Piece

PortNingbo or Shanghai Port

MOQ1 Piece/Ton

Supply Ability1000 Tons Per Month

Payment TermsL/C,T/T,Western Union,MoneyGram

PackagingSeaworthy plywood cases or pallets

Delivery7- 20 days

Quick Details

Thickness: SCH80

Place of Origin: Zhejiang, China (Mainland)

Technique: ERW

Surface Treatment: Pickled, 2B, etc

Material: TP347H Stainless Steel

Standard: ASTM

Type: Stainless Steel Pipes

Size range: DN250 (10 Inch)

Brand Name: Yaang

Packaging & Delivery

Packaging Detail:Standard export packing or as per requestDelivery Detail:7 - 20 days

Specifications

ASTM A312 TP347H Seamless Stainless Steel Pipes

1. SEAMLESS

2. thickness: SCH80

3. Size: DN250

China Stainless Steel Pipes Manufacturer Yaang offers ASTM A312 TP347H Seamless Stainless Steel Pipes, DN250, SCH80.

Alloy 347 stainless steel are austenitic stainless steels that contain stabilizing elements. This alloys is easily welded. Annealing may not be required after welding unless stress relief is desired. 347 stainless steel has excellent resistance to oxidation and corrosion. With high creep strength, 347 stainless steel work best up to 1600 °F. The addition columbium plus tantalum in 347 stainless steel give some desired characteristics like:

Prevents harmful carbide precipitation in the heat affected zone (HAZ) of the weld area

Imparts substantial immunity to intergranular corrosion

Reduced embrittlement in the HAZ of the weld area

SPECIFICATIONS OF STAINLESS STEEL 347/347H SEAMLESS PIPES :

Specification :ASTM A312/ASME SA213 / A249 / A269 / A312 / A358 CL. I to VDimensions :ASTM, ASME and APIOuter Diameter :6.00 mm OD up to 914.4 mm OD, Sizes up to 24" NBLength :Single Random, Double Random & Required LengthSize :1/8" NB to 72" NB & 1mm OD to 1500mm ODThickness:0.3mm to 100mm,SCH 5, SCH 10, SCH 20, SCH 30, SCH 40,SCH STD, SCH 60, SCH 80,SCH XS, SCH 100, SCH 120 SCH 140 SCH 160,SCH XXS.Types :Seamless, Welded, ERW, Boiler tubes, Capillary, Fabricated, Corrugated, Conduit & Large Diameter Pipes.Form :Round pipes/tubes, Square pipes/tubes, Rectangle pipes/tubes, Coiled tubes, Hydraulic tubes, Ep pipes/ tubes, etc.End :Plain end, Beveled end, Threaded end & Conduit GRADE SPECIFICATIONS OF STAINLESS STEEL 347/347H SEAMLESS PIPES :Stainless SteelTradenameUNS no.Werkstoff No.347321 StainlessS347001.4550347H347H StainlessS347091.4961

CHEMICAL COMPOSITION OF STAINLESS STEEL 347/347H SEAMLESS PIPES :CCrMnNiPSSiCb/Ta3470.08 max

min: 17.0 max: 20.0

2.0 max

min: 9.0 max: 13.0

0.04 max

0.30 max

0.75 max

min:10x C max: 1.0

347H

min: 0.04 max: 0.10

min: 17.0 max: 20.0

2.0 maxmin: 9.0

max: 13.00.03 max0.30

max0.75

maxmin:10x C

max: 1.0

MECHANICAL PROPERTIES OF STAINLESS STEEL 347/347H SEAMLESS PIPES :GradeTensile Strengtd ksi (MPa)

min

Yield Strengtd 0.2% ksi offset ksi (MPa) minElongation (% in 50mm) minHardness (Brinell) MAXHardness (Rockwell B) MAX

347/347H

75

(515)30

(205)4020195

PHYSICAL PROPERTIES OF STAINLESS STEEL 347/

347H SEAMLESS PIPES

:Density

lbm/in3Coefficient of

Thermal Expansion (min/in)-°FThermal Conductivity BTU/hr-ft-°FSpecific Heat BTU/lbm -°FModules of Elasticity (annealed)2-psiat 68 °Fat 68 – 212°Fat 68 – 1832°F68-932°Fat 32 – 212°Fin tension (E)0.2889.211.414.70.1228 x 106

Application:

Food processing equipment, particularly in beer brewing, milk processing & wine making.

Kitchen benches, sinks, troughs, equipment and appliances

Architectural panelling, railings & trim

Chemical containers, including for transport

Heat Exchangers

Woven or welded screens for mining, quarrying & water filtration

Threaded fasteners

Springs

Others

347 and 347H stainless steel is common in the petroleum refining industries. Alloy 347 and 347H stainless steel is used to make radiant superheaters, boiler tubes, high pressure steam pipe, and general refinery piping. They are also used for heavy-duty exhaust systems and manifolds.

If any inquiry about products, please feel free to contact us sales@yaang.com

Related products:

More>>

A312 TP316L Stainless Steel Seamless Pipes

Stainless Steel Pipe A312 TP316 ERW Pipe/ Welded Pipe

ASTM A312 TP310 Seamless Stainless Steel Pipes

B444 UNS N06625 Inconel Stainless Steel Seamless Pipe For Exchanger

ASTM A790 2205 Duplex Seamless Tube and Pipe

GR.B/API 5L ASTM A106 SMLS Carbon Steel Pipes SCH XS DN450

DIN GOST 316 Seamless Stainless Steel Pipe, ASTM ASME TP316L Stainless Steel tube

A312 TP317 Stainless Steel Welded Pipe

[steelflanges-blog]

ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe 32 Inch SCHSTD 6M

FOB PriceUSD 8,00- 30,000/Piece

PortNingbo or Shanghai Port

MOQ1 Piece/Ton

Supply Ability1000 Tons Per Month

Payment TermsL/C,T/T,Western Union,MoneyGram

PackagingSeaworthy plywood cases or pallets

Delivery7- 20 days

Quick DetailsStandard:ASMEPlace of Origin:Zhejiang, China (Mainland)Brand Name:YaangModel Number:304-welded-Pipe-32-stdType:

Welded Pipe

Steel Grade:304Application:Heat exchanger and Oil field piping, etcSurface:As customer's requiredOuter Diameter:32 InchThickness:SCHSTD

Packaging & DeliveryPackaging Detail:wooden cases or as customer's requiredDelivery Detail:7 - 20 daysSpecifications

ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe 32 Inch SCHSTD 6M

01) Type: Welded Pipe 02) Standards: ASME 03) Material: TP304

04) A) Size: 32 Inch

     B) Thickness: SCHSTD

05) Length: 6M (specific or random)

China Welded Pipe Manufacturer Yaang offers ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe, 32 Inch, SCHSTD, 6M.

Chemical Composition and Mechanical Property for 304/304L

Steel Grade

Chemical Composition

Mechanical Performance

C(Max)

Si(Max)

Mn(Max)

P(Max)

S(Max)

Ni

Cr

N

Mo

Tensile Strength (Min)

Yield Strength (Min)

Mpa

Mpa

304

0.08

0.75

2.00

0.045

0.03

8.0–10.5

18.0–20.0

0.1

/

515

205

304L

0.03

0.75

2.00

0.045

0.03

8.0–12.0

18.0–20.0

0.1

/

485

170

ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe's Marking & Packaging

While marking we choose a specific item number as well different color shade to differentiate steel grades. We mark ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe 32 Inch SCHSTD 6M as needed with the most suitable & visible marking technique.

Packaging is an integral part of the product. It guarantees that the ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe is delivered to the customer in the required quality. For smaller orders the size of the ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe bundle depends on the no. of Tubes ordered, for larger orders the tubes are packed into individual bundles and in such a way that the maximum weight of 4000kg per bundle is not excedded. Bundle tied down with steel tape. Bundle tied down by steel strap underlaid by tapaten.

We can also provide ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe's wooden box packing, cardboard boxes, plastic wrapping, using hardened paper with PE meshing (used as protection against mechanical damages of tubes), into tapaten and polyethylene sheet etc.

Where can we find the high quality ASME B36.10 ASTM A358 TP304 Class 2 Welded Pipe.

You can visit this website: www.yaang.com (Yaang Pipe Industry Co., Limited).

If any inquiry, please feel free to contact by email sales@yaang.com

Related products:

More>>

A790 UNS32750 GR2507 SMLS Pipe DN20 SCH40S

2inch PIPE SCH 10S ASTM A312 TP 316 SMLS BEVELED ENDS (BE)

ASTM A790 2205 Duplex Stainless Steel Pipes

Super Duplex Stainless Steel Pipe with Good Price and High Quality

ASTM A312/A269/A213 Stainless Steel Seamless Pipe For Fluid Transport TP321/TP321H

UNS 32304 Seamless Duplex Stainless Steel Pipe 1.4362 OD 6MM - 710MM

GB/T13296-91 Large Diameter Seamless Stainless Steel Pipe 309S 18inch/20inch Schedule 160

ASTM A213/A269 Seamless Stainless Steel Tubing 0.6mm - 8mm Thickness Round Steel Tube

[steelflanges-blog]

TP316L SMLS pipe 16 Inch Sch40

FOB Price : USD 8,00- 30,000/Piece

Port : Ningbo or Shanghai Port

MOQ : 1 Piece/Ton

Supply Ability : 1000 Tons Per Month

Payment Terms : L/C,T/T,Western Union,MoneyGram

Packaging : Seaworthy plywood cases or pallets

Delivery: 7- 20 days

Quick Details

Thickness: SCH40

Section Shape: Round

Outer Diameter: 16 inch (DN400)

Place of Origin: Zhejiang, China (Mainland)

Application: Construction, oil, gas, etc

Technique: ERW

Surface Treatment: Pickled, 2B, No.4, BA, Hairline, Mirror

Material: 316L Stainless Steel, etc

Standard: ASTM, ASME, etc

Type: 316L SMLS Pipe

Lenth: 365mm

Brand Name: Yaang

Packaging & Delivery

Packaging Detail:Standard export packing or as per requestDelivery Detail:7 - 20 days

Specifications

TP316L SMLS pipe 16 Inch Sch40

1. Seamless

2. Thickness: SCH40

3. OD: 16 inch (DN400)

4. Lenth: 365mm

Tolerance

a) Outer Diameter:  +/- 0.1mm

b) Wall Thickness: +/- 0.02mm

c) Length: +/- 6mm

Surface

180G, 320G, 400G Satin / Hairline 400G, 500G, 600G or

800G Mirror finish and so on.

Standard

AISI, ASTM, DIN, EN, GB and JIS

ASTM A213,ASTM A312,ASTM A269,ASTM A778,ASTM A790

DIN 17456,DIN 17458

JIS G3459,JIS G3463 etc

Material

300series: 301,302,303,304,304L,309,309s,310,310S,316,316L,316Ti,317L,321,347

200series: 201,202,202cu,204

400series: 409,409L,410,420,430,431,439,440,441,444

Others: 2205,2507,2906,330,660,630,631,17-4ph,17-7ph, S318039 904L,etc

Duplex stainless steel: S22053,S25073,S22253,S31803,S32205,S32304

Special Stainless Steel: 904L,347/347H,317/317L,316Ti,254Mo

Application range

316L SMLS Pipe is widely used in below fields:

1).Petroleum,Chemical enterprise, superheater of boiler, heat exchanger

2).High temperature resistant transmission fluid pipe in power station

3).Ship with pressure pipe

4).The exhaust purification devices

5).Construction and ornament

Main market

We have frequenter customers from

Europe: Germany,Netherland,Russia, Finland,Czech,Ukraine,Italy,Spain,Poland

Middle East: Iran,UAE,SA,Iraq,Qatar,Isreal,Jordan,Bahrain,Kuwait

South America: Brazil,Chile,Peru,Venezuela,Uruguay,Argentina

Africa: Egypt,South Africa,Nigeria

Central&North America: Mexico,US,Canada,Costa Rica

South East Asia and Pacific: Japan,South Korea,Singapore,Thailand,Indonesia,Australia

Delivery conditions

Annealed, pickled & polished.

Note

We can produce other standard as the customers’ requirement.

Chemical Composition

of Material

 Material

Composition

201

202

304

316L

430

C

≤0.15

≤0.15

≤0.08

≤0.035

≤0.12

Si

≤1.00

≤1.00

≤1.00

≤1.00

≤1.00

Mn

5.5-7.5

7.5-10

≤2.00

≤2.00

≤1.00

P

≤0.06

≤0.06

≤0.045

≤0.045

≤0.040

S

≤0.03

≤0.03

≤0.030

≤0.030

≤0.030

Cr

13-15

14-17

18-20

16-18

16-18

Ni

0.7-1.1

3.5-4.5

8-10.5

10-14

Mo

2.0-3.0

Mechanical Property

Material Item    

201

202

304

316

Tensile Strength

≥535

≥520

≥520

≥520

Yield Strength

≥245

≥205

≥205

≥205

Extension

≥30%

≥30%

≥35%

≥35%

Hardness (HV)

<105

<100

<90

Application of TP316L SMLS pipe 16 Inch Sch40:

Food processing equipment, particularly in beer brewing, milk processing & wine making.

Kitchen benches, sinks, troughs, equipment and appliances

Architectural panelling, railings & trim

Chemical containers, including for transport

Heat Exchangers

Woven or welded screens for mining, quarrying & water filtration

Threaded fasteners

Springs

Others

Other Features:

1) Chemical and Physical characteristic: durable, corrosion resistant and high-temperature resistant

2) We also produce pipes with special specifications according to customers’ requirements;

TP316L SMLS pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.

TP316L SMLS pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process does not include any welding, seamless pipes are perceived to be stronger and more reliable. Historically seamless pipe was regarded as withstanding pressure better than other types, and was often more easily available than welded pipe.

TP316L SMLS pipe's Marking & Packaging

While marking we choose a specific item number as well different color shade to differentiate steel grades. We mark TP316L SMLS pipe as needed with the most suitable & visible marking technique.

Packaging is an integral part of the product. It guarantees that the TP316L SMLS pipe is delivered to the customer in the required quality. For smaller orders the size of the TP316L SMLS pipe bundle depends on the no. of Tubes ordered, for larger orders the tubes are packed into individual bundles and in such a way that the maximum weight of 4000kg per bundle is not excedded. Bundle tied down with steel tape. Bundle tied down by steel strap underlaid by tapaten.

We can also provide TP316L SMLS pipe wooden box packing, cardboard boxes, plastic wrapping, using hardened paper with PE meshing (used as protection against mechanical damages of tubes), into tapaten and polyethylene sheet etc.

Where can we find the high quality TP316L SMLS pipe.

You can visit this website: www.yaang.com (Yaang Pipe Industry Co., Limited).

If any inquiry, please feel free to contact by email sales@yaang.com

Related products:

More>>

Seamless Precision Stainless Steel pipe For Instrumentation Bright Annealed

310S/310H Seamless Stainless Steel Tube Cold Rolled Sch 10 OD 6mm - 610mm

JIS Round Stainless Steel Boiler Tube Mirror Finished SUS 316L/SUS 304

UNS S31803 Duplex Stainless Steel Pipe

316Ti Stainless Steel Pipe seamless and welded

UNS S31803 2205 Duplex Stainless Steel Pipes

Stainless Steel Pipe Manufacturer for Taiwan/Korea Market with Top Quality

904L Stainless Steel Seamless Pipe Non-stabilised Low Carbon For Pressure Vessels

[steelflanges-blog]

TP316L SMLS pipe 10 Inch Sch40

FOB PriceUSD 8,00- 30,000/Piece

PortNingbo or Shanghai Port

MOQ1 Piece/Ton

Supply Ability1000 Tons Per Month

Payment TermsL/C,T/T,Western Union,MoneyGram

PackagingSeaworthy plywood cases or pallets

Delivery7- 20 days

Quick Details

Thickness: SCH40

Section Shape: Round

Outer Diameter: 10 inch (DN250)

Place of Origin: Zhejiang, China (Mainland)

Application: Construction, oil, gas, etc

Technique: ERW

Surface Treatment: Pickled, 2B, No.4, BA, Hairline, Mirror

Material: 316L Stainless Steel, etc

Standard: ASTM, ASME, etc

Type: 316L SMLS Pipe

Lenth: 290mm

Brand Name: Yaang

Packaging & Delivery

Packaging Detail:

Standard export packing or as per request

Delivery Detail:

7 - 20 days

Specifications

TP316L SMLS pipe 10 Inch Sch40

1. Seamless

2. Thickness: SCH40

3. OD: 10 inch (DN250)

4. Lenth: 290mm

Tolerance

a) Outer Diameter:  +/- 0.1mm

b) Wall Thickness: +/- 0.02mm

c) Length: +/- 6mm

Surface

180G, 320G, 400G Satin / Hairline 400G, 500G, 600G or

800G Mirror finish and so on.

Standard

AISI, ASTM, DIN, EN, GB and JIS

ASTM A213,ASTM A312,ASTM A269,ASTM A778,ASTM A790

DIN 17456,DIN 17458

JIS G3459,JIS G3463 etc

Material

300series: 301,302,303,304,304L,309,309s,310,310S,316,316L,316Ti,317L,321,347

200series: 201,202,202cu,204

400series: 409,409L,410,420,430,431,439,440,441,444

Others: 2205,2507,2906,330,660,630,631,17-4ph,17-7ph, S318039 904L,etc

Duplex stainless steel: S22053,S25073,S22253,S31803,S32205,S32304

Special Stainless Steel: 904L,347/347H,317/317L,316Ti,254Mo

Application range

316L SMLS Pipe is widely used in below fields:

1).Petroleum,Chemical enterprise, superheater of boiler, heat exchanger

2).High temperature resistant transmission fluid pipe in power station

3).Ship with pressure pipe

4).The exhaust purification devices

5).Construction and ornament

Main market

We have frequenter customers from

Europe: Germany,Netherland,Russia, Finland,Czech,Ukraine,Italy,Spain,Poland

Middle East: Iran,UAE,SA,Iraq,Qatar,Isreal,Jordan,Bahrain,Kuwait

South America: Brazil,Chile,Peru,Venezuela,Uruguay,Argentina

Africa: Egypt,South Africa,Nigeria

Central&North America: Mexico,US,Canada,Costa Rica

South East Asia and Pacific: Japan,South Korea,Singapore,Thailand,Indonesia,Australia

Delivery conditions

Annealed, pickled & polished.

Note

We can produce other standard as the customers’ requirement.

Chemical Composition

of Material

 Material

Composition

201

202

304

316L

430

C

≤0.15

≤0.15

≤0.08

≤0.035

≤0.12

Si

≤1.00

≤1.00

≤1.00

≤1.00

≤1.00

Mn

5.5-7.5

7.5-10

≤2.00

≤2.00

≤1.00

P

≤0.06

≤0.06

≤0.045

≤0.045

≤0.040

S

≤0.03

≤0.03

≤0.030

≤0.030

≤0.030

Cr

13-15

14-17

18-20

16-18

16-18

Ni

0.7-1.1

3.5-4.5

8-10.5

10-14

Mo

2.0-3.0

Mechanical Property

Material Item    

201

202

304

316

Tensile Strength

≥535

≥520

≥520

≥520

Yield Strength

≥245

≥205

≥205

≥205

Extension

≥30%

≥30%

≥35%

≥35%

Hardness (HV)

<105

<100

<90

Application of TP316L SMLS pipe 10 Inch Sch40:

Food processing equipment, particularly in beer brewing, milk processing & wine making.

Kitchen benches, sinks, troughs, equipment and appliances

Architectural panelling, railings & trim

Chemical containers, including for transport

Heat Exchangers

Woven or welded screens for mining, quarrying & water filtration

Threaded fasteners

Springs

Others

Other Features:

1) Chemical and Physical characteristic: durable, corrosion resistant and high-temperature resistant

2) We also produce pipes with special specifications according to customers’ requirements;

TP316L SMLS pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.

TP316L SMLS pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process does not include any welding, seamless pipes are perceived to be stronger and more reliable. Historically seamless pipe was regarded as withstanding pressure better than other types, and was often more easily available than welded pipe.

TP316L SMLS pipe's Marking & Packaging

While marking we choose a specific item number as well different color shade to differentiate steel grades. We mark TP316L SMLS pipe as needed with the most suitable & visible marking technique.

Packaging is an integral part of the product. It guarantees that the TP316L SMLS pipe is delivered to the customer in the required quality. For smaller orders the size of the TP316L SMLS pipe bundle depends on the no. of Tubes ordered, for larger orders the tubes are packed into individual bundles and in such a way that the maximum weight of 4000kg per bundle is not excedded. Bundle tied down with steel tape. Bundle tied down by steel strap underlaid by tapaten.

We can also provide TP316L SMLS pipe wooden box packing, cardboard boxes, plastic wrapping, using hardened paper with PE meshing (used as protection against mechanical damages of tubes), into tapaten and polyethylene sheet etc.

Where can we find the high quality TP316L SMLS pipe.

You can visit this website: www.yaang.com (Yaang Pipe Industry Co., Limited).

If any inquiry, please feel free to contact by email sales@yaang.com

Related products:More>>

ASTM A790 UNS32750 GR2507 Welded Pipe SCH80S DN400

SUS Standard Seamless Stainless Steel Pipe For Shipbuilding Austenitic Cr17n6Ni5N

ASTM Large Diameter Seamless Steel Stainless Pipe For Water , Schedule 80 TP317 TP317L

Bright Annealed Large Diameter Stainless Steel Pipe/SS Round Tubing 8 Inch

2205 UNS S32750 UNS S31500 Duplex Stainless Steel Pipes

4mm ASTM A213 Cold Rolled Structural Thin Walled SMLS Tubing Corrosion Resistant

TP316/TP316L 40mm Diameter Stainless Steel Tubes

24 Diameter Stainless Steel Pipe

[duplex-stainless-steel-supplier]

An ISO 9001:2008 Certified Company, Oshwin Overseas is a leading Duplex 2205 Pipe Supplier and a well known Duplex Pipe Manufacturer. Oshwin Overseas offers high quality Duplex Pipe in various forms and sizes. Oshwin Overseas deals in all forms of Duplex Pipe. Oshwin Overseas supplies Duplex Pipe in all countries across the globe, as ware house to near to the airport and port for fast delivery. Oshwin Overseas deals in Duplex Pipe at competitive price. A rejection rate of less than one percent has consolidated the claim. The primary reason for this is the priority that we give to complete satisfaction of the customer.

For Inquiry And Quotation On Duplex Pipe Products, Mail Us sales@oshwin.net

Visit Our Website For More Information On Duplex Pipe - www.duplex2205.net